1142 Color Codes

Hi ;
We have deployed many 1142 APs on a site.When i have checked color codes , some of thems LEDs are static green which we have expected.But some of them are not giving out any light.But from the controller menu i saw them active and operating.And i can connect that APs but no led is lid.
When i get closer to the AP i saw a Red color which can not be seen from distance (Not Red flashing LED).What the possible error can be ? Is it a factory default mistake or so ?

The problem is , AP doesnt give out any lights.LED doesnt light on.
But from the controller ; i saw AP is operating , and i can connect on it.
Here is output of booting AP that can successfully join the contoller , and this is happening in more than one AP
*Mar 1 00:00:08.073: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:08.085: *** CRASH_LOG = YES
Security Core found.
Base Ethernet MAC address: FC:99:47:D5:39:C6
*Mar 1 00:00:09.661: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:10.233: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:10.264: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 16 messages)
*Mar 1 00:00:10.287: status of voice_diag_test from WLC is false
*Mar 1 00:00:11.330: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:12.411: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:12.449: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Tue 18-Oct-11 14:52 by prod_rel_team
*Mar 1 00:00:12.449: %SNMP-5-COLDSTART: SNMP agent on host HR-Test is undergoing a cold start
*Mar 1 00:11:32.043: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:11:32.110: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:11:32.110: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:11:33.110: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:11:33.110: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:11:33.303: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:11:41.233: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 172.16.78.207, mask 255.255.248.0, hostname HR-Test
*Mar 1 00:11:50.911: status of voice_diag_test from WLC is false
*Mar 1 00:11:50.972: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:11:52.367: %CDP_PD-4-POWER_OK: Full power - LOW_POWER_CLASSIC_NO_INJECTOR_CONFIGURED inline power source
*Mar 1 00:11:52.390: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:11:52.415: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:11:53.374: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:11:53.375: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
*Mar 1 00:11:53.401: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
Translating "CISCO-CAPWAP-CONTROLLER.dpu.edu.tr"...domain server (194.27.43.17) [OK]
*Mar 1 00:12:02.006: %CAPWAP-5-DHCP_OPTION_43: Controller address 172.16.64.10 obtained through DHCP
wmmAC status is FALSE
*Dec 10 14:03:03.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.64.10 peer_port: 5246
*Dec 10 14:03:03.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Dec 10 14:03:03.836: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.64.10 peer_port: 5246
*Dec 10 14:03:03.837: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.64.10
*Dec 10 14:03:03.837: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Dec 10 14:03:03.983: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Dec 10 14:03:04.100: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec 10 14:03:04.114: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Dec 10 14:03:04.114: %CAPWAP-5-CHANGED: CAPWAP changed state to UP
*Dec 10 14:03:04.115: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec 10 14:03:04.166: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller DPU_WIFI_KONTROLLER

Similar Messages

Why won't the color code I am trying to use from a windows machine work on my Mac? Code: PMS7409

Hi I'm an intern at a telecommunications and management company who are about to release an update on their website and server screens. My job is to create the new graphics and remake the presentation layers. I am also assigned to create a business card template, which is where my question comes. I am give a color code, from a Windows OS, and try to input that code into Photoshop CS6. That color code won't appear. It's a deep orange and the code I am being told is; PMS7409. I'm not sure thats a code (atleast on the Mac), but I haven't used a Windows OS in so long I don't even know if Windows has their own color coding system or what. Can someone help me out and tell me if this is me, my boss, or we're missing something and I'm going to look like an idiot?

Definitely not a colour code for mac, the only thing I suggest you do is if you get the code on your windows version is to get the other values i.e
instead and input those into it rather than the #colour code (Hue, Sat, B, R, G B) etc.
Also ... Colour codes are 6 figures long i.e the one displayed and also black #000000 and white #ffffff
however the one you gave is 7!
Message was edited by: ConstantAngel

How do I replace image color with an exact html color code?

I simply want to change the color of a small pic to an existing html color code, 3399CC. The pic is very simple, and only has one color. In Photoshop CS4, I go to: Image -> Adjustments -> Replace Color. For the new replacement color, when I type in 3399CC, it doesn't give me that color - it gives some other shade of that color. (I can tell because I use a program that tells me the exact html code a color is when I hover my mouse over it). It seems the only way to really get the color you want is to adjust the sliders (hue, saturation, and lightness). But it'd be practically impossible to play around with every increment of those sliders until I get the exact color code.
There's got to be a way to simply enter the html color code and have the pic changed to that color. Does anyone have any idea?

Turns key. WhirrRRRrrrrRRRrrrr.... Nothing. (I answered in the other thread)
Perhaps I've had too much coffee today, because I just got a clear vision of Bart Simpson, at the board, chalk in hand...
SRGB IS KING!!! SRGB IS DEAD!!! LONG LIVE SRGB!!!
SRGB IS KING!!! SRGB IS DEAD!!! LONG LIVE SRGB!!!
SRGB IS KING!!! SRGB IS DEAD!!! LONG LIVE SRGB!!!
SRGB IS KING!!! SRGB IS DEAD!!! LONG LIVE SRGB!!!
SRGB IS KING!!! SRGB IS DEAD!!! LONG LIVE SRGB!!!
SRGB IS KING!!! SRGB IS DEAD!!! LONG LIVE SRGB!!!
-Noel

Best Calendar App to connect to Google Calendar and color code appointments

I am looking for a replacement calendar app that will connect to Google Calendar and allow me to color code individual appointments. I have looked at a ton of apps in the app store but none of them talk about the color coding option I am looking for. I don't want to do the trial and error thing and waste my time and money.

Download Gmail app. itunes.apple.com/us/app/gmail/id422689480?mt=8

Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

3D Map - Color Code and Cursor Tracking

Hi, I need some help trying to implement some user interface functionality for a program I am developing.
This will be a tuning tool for automotive ECU. The program will be reading in two signals (Y-axis is RPM, X-Axis is manifold pressure) and use a 2D interpolation to output a Z value to be used in a calculation. There are two pieces I'd like to add to this.
1. Color code the cells based on the cell value in relation to the max and in of the entire 2D-Array
2. Have a live currsor that tracks the current cell of the 2D array and highlights the cells that are being used in the interp calculation so it makes it easier for the user to make changes and calibrate the tables.
3. BONUS: An easy way to be able to select a range of cells and increment them by a set amoun or scale them all by an imput amount (like scale range by 90%).
Basicly, I'd like to recreate some of the user interface functionality of the software shown below in the second picture and the video linked below.
VIDEO: https://www.youtube.com/watch?v=OkVUJCy0sJ4
VIDEO: https://www.youtube.com/watch?v=oeZc-ka6ago (at 16:45 you can see a good example of the currsor tracking through the cells as teh two inputs change)
-As you drive and the RPM and loading changes there is a blue ball that tracks on the table the current x-y location of the 2D map and the four coresponding cells around the ball are highlighted to show witch of these cells are being used in the calculation so the user can easily alter these cells in real time to tune the output he is looking for. I'd like to be able to highlight, or blink either a single cell closest to the current value, or the 4 corners around it and have it update real time as the user drives the car.
Any ideas of how to implement this kind of functionality? The current VI is attached. I should note the x-array and y-array won't necessarily always be constant spacing between cells.
Thank you for any help in advance!
Attachments:
3D Map Color Coded & Currsor.vi ‏17 KB

Okay, so I made some progress on this. I was able to use an intensity graph to visually color code the relative position of the cells. Is there a way to make the 2D array translucent and overlay the color array intsity graph behind it? is there a better way to do this.
I was able to get the closest current cell value to update as black and track around live on the intensity graph. I did this by temporarily setting the cell's value to 0. Is there a way to somehow highlight the actual cell on the 2D-Array instead?
The code is attached. I added a random sine wave input to simultate some signals for the x and y input. The Y array now runs in reverse order which made it tricky to get some of the functions to work properly so I had to use a 2D transpose and 1D reverse array to get it back in the right form. There's probably a better way to do this.
Any help is great appreciately and rewarded with Kuddos!
Attachments:
3D Map Color Coded & Currsor (Rev B).vi ‏33 KB

How to delete other files(yellow color code) from the hard drive, how to delete other files from the hard drive

how can i delete the yellow color code items from my hard drive? What are these other files anyway? I wanna save some memory space from my storage.

Macbook Pro community is here
Following thread could solve your question.
https://discussions.apple.com/message/19030300#19030300

Color Code is not working, please help

I am using the color code 080808 from adobe photoshop as my background for my template. When i put the JPG file into dreamweaver and try to set the page properties in dreamweaver (background) to 080808 it is putting me at pure black. please help me.080808 is not a pure black its a shade of it. I need a color code that matches 080808 correctly. thanks
I am using adobe CS3

I'm not quite sure I understand exactly what you are doing, but I ran into something like this myself. I was creating GIFs in Photoshop -- type on a background color. I then created DW pages. I used the same color code for the background color in PS and again for the background color in DW, but when I inserted the images in the page, they did not match. It turned out that when I created a new file in PS, I was creating it in my default color space, Adobe RGB. I assumed that when Save For Web converted the file to sRGB, the colors would convert perfectly. What I found is that I should have been creating my PS files by starting with a new file in sRGB color space. Once I did that, the background color of my images identically matched the background color of my DW page.
Hope this helps.
John

Created file in illustrator then opened in photoshop but color code changed?

I Created file in illustrator and then opened the art in photoshop but the wierd thing is that the color code changed. If you look at the image with you eye the color will look the same to the naked but if you use the eye dripper tool you can see that the color code has changed between illustrator and photoshop.
Is there a way to make the CMYK color code stay the same?

In Illustrator the "Edit---> color settings" are set to "North America General Purpose 2" and the that is the same color setting choice in Photoshop.
For example there is a black color in Illustrator that has this CMYK code "60, 49,47, 100"
but in photoshop the CMYK code for the same part of the graphic changes to "75, 68, 67, 90"
This is only one example of many color code changes that are happening and this may look like the same color on the screen but I need them to both have the same code because I am doing specialized printing and need no changes in color codes like this to occur.
If I have the color setting in both photoshop and illustrator both set exactly the same "Edit---> color settings" then do you know why this color shift would be happening. Please help.

Color code groups in address book

Is there any way to color code groups so that when mail comes in I know to associate it with a specific group. I was able to do this in entourage but have switched to apple mail.

As already described, create a new Rule in Mail.app (Mail -> Preferences -> Rules), that reads:
if (ANY) of the following conditions are met:
(Sender is member of group) (xxxxxxxxx)
Perform the following actions:
(Set Color) (Of Background (or text as you prefer) to (Any color you wish)
Save the rule.
Before doing that, you might want to create a few Groups (or Smart Groups) in Address Book with the people you want to color.
Hope this helps.
Message was edited by: Martin Marconcini (changed sqared brackets for parenthesis)

Why color code css using powershell command is not visible in email ?

Hello,
I am applying color code for disabled status in PS script as written below :
$ReportData = Get-SPServiceInstance | Select Server,TypeName,Status,NeedsUpgrade | ConvertTo-Html -Fragment
$DisabledStatus='<td>Disabled</td>'
$DisabledColorStyle='<td style="background-color:red !important;color:white !important" >Disabled</td>'
$ReportData = $ReportData -replace $DisabledStatus,$DisabledColorStyle
ConvertTo-Html -Body "<font color = blue><H4><B>Report </B></H4></font>$ReportData" -Title "Test Report" -CssUri C:\style.CSS | Out-File "E:\Reports\TestReport.html"
This report shows perfect on system where report file is located at E:\Reports\TestReport.html location as below :
However , when I send this report via email using following command
$Report = Get-Content "E:\Reports\TestReport.html"
Send-MailMessage -To $To -SmtpServer $SMTP -From $From -Subject $Subject -BodyAsHtml "$Report"
I dont see disabled as red color in email , while table's style is working which is stored at C:\style.CSS
Would you please let me know the reason behind same ?
Thanks and Regards,
Dipti
Dipti Chhatrapati

Hi Dipti,
I‘m writing to check if the suggestions were helpful, if you have any questions, please feel free to let me know.
If you have any feedback on our support, please click here.
Best Regards,
Anna
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Png files not exporting in correct color code

Hey everyone I've had this continual problem in illustrator with png exports, for some reason my png's export with duller, less saturated colors than what I am seeing inside of illustrator. However, my jpegs export correctly. I've been able to figure out that my png's are not exporting with the correct color code (sRGB), even if this option is selected in "save for web" options. I have been having to open the png's in Mac's preview program or opening them into photoshop and exporting with sRGB profile embedded from there. I figure there must be some setting I don't have selected within illustrator. Document color mode is RGB, working space is sRGB, "Color Management Policy" is preserve embeded profile, and under the "Assign Profile" option it is set to working space RGB: sRGB. Any suggestions?

I don't think there is anything wrong with the color management you are using.
I suspect that you are using Illustrator CS6.
Although you can specify that the image has to be converted to sRGB (and it probably does), the profile is not embedded in the file.
The latest CC version does, although you cannot check a box: ICC Profile like you can when saving JPEG.
I think the reasoning behind this could have been: "PNG is a web file format. and Browsers cannot be trusted with colormanagement, most of them think that all files are sRGB, so why embed the profile..."
So you did the right thing by assigning the profile in Photoshop.
Ton

Can I color-code file types?

I'm a Mac newbie. I carried over some Windows files I have been working on for years. They were made by different versions of a layout program (PageMaker 6.5 -> PageMaker 7.0 -> InDesign CS5.5), and so have different file extensions.
I see how to color an individual filename, but would like to assign one color to all files with the same extension to facilitate bringing them all up to date. Can I do that?

Hello,
Yes you can color code based on extensions. Open a Finder window and hit command+F - this is a search window that can be populated according to your searching criteria and can also be saved to later consulting (it would live in the sidebar should you decide so). Click on the little drop down menu presently labeled as Type and choose other; type extension on the now blinking cursor besides the magnifying glass to narrow your options, choose file extension and "ok" your selection. Now fill the box with the desired extension (no dots necessary) and select all, do your color coding and you're done.
Regards,
Vitu

Color Code or Highlight Certain Events?

I may be the only person who wants this, but does anyone know of a way to color code the event names in iPhoto? Similar to the way you can color code folders in the finder. Even if it's just an on/off highlight.
The long story is I've been scanning and importing hundreds of photos from my "pre-digital" days. They all need a bit of tweaking (sometimes just a crop, but often a color adjustment, and resetting the dates since they automatically are given the date of import, not when I took the picture) so I've been slowly going through them, event by event, to do it. But I'd love to "highlight" all the event titles and then when they are tweaked, remove the highlight. Allowing me to do a quick scan through the events to see how many I have done and still have to do.
I've tried some googling to see if there might be a script or something, but I'm not sure what words I should use besides color code or highlight events. And they didn't turn up anything.
Long shot, but I figure if anyone has tried to do this, the helpful people here would know. If not, ce la vie.
Thanks,
Gina

No
You could assign a keyword to the photos when yo import them and make a smart album on that keyword - then remove the keyword as you "tweak" the scans so they drop out of the smart album
LN
Message was edited by: LarryHN

The ability to color code layers...

Dear Apple,
The ability to color code layers would be the biggest time-saving boost to my workflow that I can imagine.
All layers look so much alike. Add constantly scrolling through dozens or hundreds of them, expanding and contracting often. Loosing ones bearings within the layers window is a given. It seems every few minutes, I have to stop and re-figure out where things are.
If one could right-click to set a layer header one of eight or so colors (like in photoshop and just about every other program that uses layers) this would increase my productivity quite a bit.
The rant ends. We now return you to your regularly scheduled forum.

Granted, color-coding layers could be very helpful. That said, I find that group and layer labeling, and intuitive grouping and organization go a long way to keeping things straight.
I don't think I've ever done a project with a hundred layers, but I've been as high as 40-50 before and never really had a hard time keeping track.
Now, there is a shortcut that you might find useful. If you hit the X key on your keyboard, Motion will separate all the layers currently active in the canvas at the playhead's position ala Expose. This will allow you to select any layer easily. When you do so, the layer will become visible in the layers pane no matter how deep it's hidden.
Finally, there is a feedback thread for product suggestions that is actually read by the Motion team, unlike this forum.
Andy

1142 Color Codes

Similar Messages

Maybe you are looking for