11g authentication directly against EBS (bypassing need to log into EBS)

Is it possible to configure EBS authentication that allows users to directly authenticate against the EBS database? I see some documentation/threads on this but it seems to be for setting up a link "within EBS" to use EBS credentials to log into OBIEE. Has anyone successfully configured security to directly autheticate against EBS DB (bypassing the need to log into EBS).
Any input is appreciated.

Hi,
See below my thread this might be of some help to you.
Logout link missing upon integrating OBIEE 11g with EBS (Not through SSO)
Thanks,
Sri

Similar Messages

Trying to download an app for my iPhone but tells me i need to log into the iTunes store which i already am. any suggestions?

I am trying to download an app for my iphone but the msg tells me i need to log into the itunes store on my computer which i am already in. any suggestions?

Are you trying to download directly from iPhone?
If true, go to Settings > Store > Apple ID > sign out then sign back in again.

HT201365 I reset my iPhone 4 and it says I need to log into my iCloud

I reset my iPhone 4 and it says I need to log into my iCloud, but I don't have an iCloud even though it gives me the first letter to an email, of which I don't have. I bought my phone from Verizon when it was new. What do I do?

It can't be tracked with Find My iPhone if it wasn't enabled, and even if it was it can be tracked if it's turned off. All you can do is physically look for it.
You might also want to read this: http://support.apple.com/kb/HT5668.

I have been trying to get the full version of lightroom after using a trial version but it says something about "GB" ? And i need to log into different account or set up a new one? Please help?

I have been trying to get the full version of lightroom after using a trial version but it says something about "GB" ? And i need to log into different account or set up a new one? Please help?

I would love to give you more information but i cannot access that page again? i can add Lightroom to my cart but when i go into my cart it says there is nothing in there? I have a red bubble above "my cart" with a number 4 in it to show there is something there but there is not? It just wont let me buy anything?

Why am I getting a message that I need to log into the Canadian store for app updates and iTunes

Why am I getting a message that I need to log into the Canadian store for app updates and I tune purchases?

Should you be in the Canadian App Store? Is that your store? Of not - or of you need to see what store you are in.
Settings>iTunes and App Stores>Apple ID
Tap your ID
Tap View Apple ID
Enter your password
Go to country/region in the popup window to change the store

My ipad Won't let me download apps? Says I need to log into iTunes store but I am logged in??help please, My ipad Won't let me download apps? Says I need to log into iTunes store but I am logged in??help please

Says I need to go into iTunes and download from there but I'm already signed in....I'm so confused

Hello dowie3,
Just restart your ipad, with version of IOS are you running?
It's possible that your apple id is locked, or there are some prolems with your internet connection. On this site you can check you account en find a solution for your problem. http://store.apple.com/us/help/your_account
Jack Groot

Help needed to log into an Open Directory account which has the same username as the local account

Hello,
I have successfully setup a Mac OS X Lion Server and it is an Open Directory Master. On the server Ihave created an account with the name 'Connor'. I have numerous Macs (allrunning OS X 10.7 Lion) connected to this server but on one of the Macs thereis a local account with the name 'Connor' too (the local and networked accountshave different passwords). I want to log into the Open Directory account onthat mac. So, I have done an authenticated bind to the server, but when I go tolog in the password box shakes. I think the computer thinks I am trying to loginto the local account and not the Open Directory account. On Windows, I canlog into either the local accounts or the networked accounts by typing\LOCAL-COMPUTER-NAME\Connor. So, I was wondering if there was a similar commandto do this on Mac.
I don't think I haveworded this very well, so if someone doesn't understand please ask me somequestion about the problem and I will try and explain it better.
Any help would be greatlyappreciated,
Connor

Maybe I didn't make myself clear. I have used directory utility to do an authenticated bind to my server. I also have no problem logging into other accounts in the Open Directory. But, I just can't log into the account which has the same name both in the Open Directory and locally.
Was there something I missed in Directory Utility? Could you please help me if this is so.
Thanks for replying so quickly

Need help logging into Adobe Content Viewer on my iPad

I have downloaded Adobe Content Viewer on my iPad and when I try to sign in I get an authentication failed message. I have changed my password and i have no problem logging into my account for Adobe on the website. Not sure what I am doing wrong.
PLease help.
K

Hi Bob,
thanks for hen the reply.
I did that and it gives me an unsupported browser message.
And the upgrade to a supported browser link goes no where
Thoughts?

Need to log into portal usign a different User-Agent(SPS15 issue)

Hi,
we are having an error trying to log portal. We have an application that logs into portal to get the MYSAPSO2 Cookie.
This applications have in the header the User-Agent "ExtApp".
Apparently due to changes in SPS15 the page builder becomes more restrictive on the range of browsers that can access portal.
We´d like to add our own User-Agent.
Any thoughts on how can this be done.
Regards
Fernando

For anyone interested, the problem was resolved by restarting the OC4J_Security component from the infrastructure tier.
This poses another question, for newly created users to take effect, does this restart always need to occur?

OBIEE 11G authentication integration with EBS 11 - is it possible?

Hi experts,
My OBIEE 11.1.1.5 is installed on Linux 64 bit machine.
I've thoroughly performed all the action listed in the guide, but I'm getting the famous 'You are not logged in' message.
Has anybody succeeded to enable security integration between OBIEE 11 and EBS 11?
Thanks in advance,
Alex

Hi Deva,
Thanks for your reply.
I've heard from some people that there's a bug in OBIEE 11.1.1.5 that prevents integration of OBIEE 11 security with EBS 11.
I'm trying to find anyone who actually succeeded to get the thing done.
I used the DeliverBI document as well as the official guide.
Is there any way to "debug" my settings? How can I know - what's wrong?
Thanks,
Alex

Need to log into Mobility Sevices Engine

Hi Everyone.
Sorry if anyone already addressed this issue before. I just can't find it.
The preious wireless technician left our company and didn't leave the password. Now we need to re-ip the WCS, WLC and MSE. The only problem left is with the MSE.
From the WCS, I can see the username for the MSE is admin, and the password shows asterisks.
Also from Security Index Detailed Report in the WCS, I can see the following description,
Device Security Issue: Mobility Service Engine Mobility Services Engine user has default password configured.
Security Solution: Configure strong password for the users on the Mobility Services Engine
I did a research and from this link (http://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/CAS/configuration/guide/msecg_ch2_CAS.html), it's saying "
The default username and password are both admin. "
However when I tried to SSH to this MSE(model# 3310), MSE asked for username and password. I put admin/admin there and got an error mesage of "password authentication failed". I am thinking there is another default password for this MSE. Anybody can help? I don't want to go through the password recovery process. Another question is that if anybody can point me a link of how to change the IP address of the MSE.
Any input will be greatly appreciated.
Robert

Robert,
If you don't have the password, then you'll have to go through the recovery process.
http://www.cisco.com/en/US/docs/wireless/mse/3350/quick/guide/mse_qsgmain.html#wp1053115
To change the IP, you can go through the setup script once you can get in.
/opt/bin/setup.sh
IIRC
HTH,
Steve
Please remember to rate helpful posts or to mark the question as answered so that it can be found later.

Why do I need to log into google to use feedly? And, when I do, it wants me to give access to my to my account.

Is this safe, why should I have to sign in with my google account? And why do I need to give access to my account?

What does that mean. I'm just asking how to use one of the products that I was encouraged to use by a Mozilla email. I was worried about the issue of safety and privacy of having to sign in with another companies account (Google) and give access to that account.

I need to log into a remote Linux system using LabVIEW.

I can get in using the FTP protocal to get my data, but I need to execuite a shell command to start data processing. I have tryed Telnet but it wants to be interactive and I jest cant seem to mane it work Has anyone done this. (please note that this process will be done about 300 times during the process and I would like to automate it.
Thank you
James Zumstein
[email protected]

Hi James,
Some ideas:
1. Internet Toolkit from NI - as far as I remember, Telnet is included
2. Using TCP functions (and some documentation about Telnet protocol) you can implement it.
3. Use a Telnet application and try to send "commands" to it (there are available some VIs to communicate with other apps this way, especially for windows)
4. Try to implement a little server application (on your remote machine, capable of triggering those processes) and connect to it using TCP. You can find an example in Labview.
If one of these sounds interesting, I'll be happy to give you details.

Need to Log into two different screens on bootup?

Since resinstalling Mac OS X Mountain Lion on my 2012 13'' Macbook Air, I have to log in twice. While setting up it made me create a new password before it would wipe the disk and let me continue. So now I have to log in twice booting up my macbook air. I'm totally lost. The 1st screen is gray and has a circle with an outline of someones head with a question mark and says "update needed". As far as I can tell I have kept up on updates and kept updating until it said no updates available. After I get past that screen with the password, I have another screen with the selected picture of a macaw that I normally log in with. This has my "OLD" password. Would this all be because of FileVault?

Hi, have you found any resolution to this? I suddenly have found myself with the same problem. Thanks in advance!

Need help logging into solaris

I am new to this, I just got my solaris dvd set, I have installed it and I tried several times to log in, but I keep running into the same issue, I am able to input my login name, but it refuses to let me type in my password, it doesn't matter what I type, nothing happens, no letters no astrix's (*) I just don't know whats going on.
PS for those who are wondering how I am able to post here, i am running the Ubuntu live cd, that way I can bypass the seemingly defective login screen of my solaris 10 operating system and connect to the internet.

Did you hit return after typing your password?
There are no characters echoed to the screen when
typing it.
Darrenyes I hit return several times and it said that the password was incorrect,
and are you saying that its not supposed to show up as I type it, or was that one of your questions, if so, then yeah, there were no characters echoed to the screen.

11g authentication directly against EBS (bypassing need to log into EBS)

Similar Messages

Maybe you are looking for