11G data import into 9i db

Is there a way to export data in 11g and import to 9i

user6842679 wrote:
Is there a way to export data in 11g and import to 9iHi,
Yes you need to use 9i exp utility to export the data from 11g and then import it into 9i.
Regards
Anurag

Similar Messages

Ideas on how to export from Oracle (11g) for import into a MSSQL server?

Hi folks,
Crazy question yes...but I have some devs that are needing to export some schemas/tables from Oracle to somehow import into MSSQL.
Are there any utilities our there, hopefully from Oracle that would allow for this? So far, all I can think of are to generate the DDL from the Oracle instance, and then do some scripts to output the data in a cvs type format....
Anything better than this?
Any links or suggestions greatly appreciated.
Thank you in advance,
cayenne

cayenne wrote:
EdStevens wrote:
cayenne wrote:
sybrand_b wrote:
Heterogeneous Services using ODBC or OLEDB.
No need for stupid csv files.
Sybrand Bakker
Senior Oracle DBAThank you for the prompt reply. I'm looking into this and am finding some Oracle documentation, but just off the top of my head, this approach seems to assume the 2 database servers can see or talk to each other.
What if the oracle box is on one network...that cannot connect to the network that the MSSQL box is on. For example..running off some test data from one company to another company with networks that do not cross?Assuming some acceptable export/import utility, how do you plan on getting the file from the source to the target if the two servers are on networks that cannot talk to each other?Well, I'm still trying to gather facts, this is just a question coming in from some developers.
From what it may be, is that the can scp from site to site, but no direct connectivity between the database servers on the sites...isolated, maybe a DMZ...I dunno everything yet.Well, you either have connectivity between the two machines or you don't. Binary decision tree.
IF net_connectivity_exists
     you can use oracle sqlnet enabled capabilities
     OR
     you can transfer an export file via ftp, sftp, scp, etc.
ELSE
     you have to transfer an export file via sneakernet
END-IF

Mystery Data imported into AW

I exported data from an OFA findata that contains a composite. In Oracle Warehouse Builder I built the exact same cube with the exact same sparsity as the OFA cube. In AWM through Oracle OLAP Worksheet I attempted to import the .eif file into the stored cube however, data shows up in accounts that never existed in OFA. I've tested importing the .eif into a brand new AW that did not contain any structures and the data imported fine. It looks like the composite is causing the issue because I am able to import data from findatas that do not contain a composite without any problems. I need to get historic data from OFA into the AW cube. The cube must be initially created in OWB for maintenance purposes, does anyone have any suggestions?
Thanks,
Kristine

[NLS_LANG doc search|http://www.oracle.com/pls/db102/ranked?word=nls_lang&remark=federated_search]
[NLS_LANG FAQ|http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm]
The third component is related to client side character set (such as Windows code page): NLS_LANG = language_territory.charset
(note how you use charset setting to indicate the expected client character set, for conversion to work properly)
Not all tools "use" NLS_LANG. Tools such as Oracle SQL Developer provides Unicode support, not using code page for conversion. If you get display problems even with Unicode support, make sure fonts used provides the required language script (glyphs).

GL data Import into Hyperion Essbase using Adapters in FDM

Hi All,
I am trying to import GL data using the below adapters, I have an Essbase application created to accept the data. I previously imported a text file into Essbase and that worked perfectly.
Source Adapter :ES9x-G4-C
Target Adapter :EBS-FIN-B
FDM version :11.1.1.1.00
1) my Integration settings in workbench are valid
2) control tables in FDM web are valid
3) I created an Import group and set the file Type to adapter then specified to Source adapter as EBS-FIN-B.
What are the next steps as my application is not IMPORTING.
Thanks
K

Hello,
All software available from Oracle to download is on their eDelivery site: http://edelivery.oracle.com
If software is not listed there that you need; then you will need to create a Non-Technical SR for media delivery.
Also please keep in mind that there is no EBS adapter compatible with FDM 9.3.1 .... please review the compatibility matrix at the end of each FDM ReadMe.
Thank you,

How to manage the regulatory data import into specification database?

Hi experts,
We have a EH&S implementation project for a distribution company which has no other sap module and very limited scope.
They want to get the 3E data, compare and update and send/updates with vendors and customers and also inteface the data with AS 400.
They are not willing to use the Ariel ADM tool and any other additional licensing, due to limited scope.The 3E is sending the file in xml format. So the EH&S OCC connector could be used. but this again needs the use of ehs expert, which needs additional licensing and scope increase.
Does anybody worked on intergrating 3E data into specifications without usig ADM and OCC?
Regards
Milmuk

Thanks C.B.
Our requirement is just to import the regulatory data for the compliance check from 3E. Once the data gets captured in specification property tree, we can utilize it further. We don't have the scope and resources to make a complex design.
If the specification system could be able to receive the regulatory content in any other file format, we can ask 3E to provide the files in that format ( if possible). As I understand,the standard systems used are IMDS or OCC or Ariel ADM. IMDS also seems to have a separate license.
Does anybody worked on integrating 3E/regulatory data into specifications without using ADM and IMDS? ( very much using the standard SAP out of the box functionality). We are using ECC 6 with EhP 5.
Regards
Milmuk

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

Importing XML Data Back into the Form

I have a form that shows several subforms based on the selections the user has made while filling in the form. This is working quite well but when I import the XML data back into the form it doesn't show the subforms that have been used.
Is there an easy way to change this?
Thanks in advance!
Emma

Actually the issue may actually have to do with the fact that the connections aren't bound, but I haven't seen the data.
I have some fairly complex forms that include both subforms and instances, have an XSD embedded and export as XML. When I import the data, everythi
Now, that being said...
Are your subforms "hidden" and you opt to display them upon selection of a radio button for example, or do you SetInstances()? If you're using visible=TRUE or FALSE, that may also cause some issues.
Try this -- on Form:ready try this code:
if(this.rawValue == "on"){ //this radio button 1
_subform1.setInstances(1);
_subform2.setInstances(0);
_subform3.setInstances(0);
else if(this.rawValue == "on"){ //this radio button 1
_subform1.setInstances(0);
_subform2.setInstances(1);
_subform3.setInstances(0);
else if(this.rawValue == "on"){ //this radio button 1
_subform1.setInstances(0);
_subform2.setInstances(0);
_subform3.setInstances(1);
else { // this is fisrt time open -- i sometimes had issues with subforms being visible on first entry
_subform1.setInstances(0);
_subform2.setInstances(0);
_subform3.setInstances(0);
Then on:Click essentially copy most of the code you put in form:ready
if(this.rawValue == "on"){ //this radio button 1
_subform1.setInstances(1);
_subform2.setInstances(0);
_subform3.setInstances(0);
else if(this.rawValue == "on"){ //this radio button 1
_subform1.setInstances(0);
_subform2.setInstances(1);
_subform3.setInstances(0);
else if(this.rawValue == "on"){ //this radio button 1
_subform1.setInstances(0);
_subform2.setInstances(0);
_subform3.setInstances(1);
Of course this will go on top of your radio button group.
If you are exporting to XML, it will make your life a whole lot easier, by the way, to import an XSD and bind your nodes, especially as your forms and data start to get more complex.
Finally, you may also know this but -- unless you have Forms Server, any user that wants to export the data or import the data will need to have at least full Acrobat Professional. If you want people to be able to save data in the form but import/export isn't that important, they will need to have full Acrobat.
I hope that helps a bit. Good luck!
Lisa

[Multisim]How to import data files into Multisim?

Hi guys,
In Multisim, we can plot various kinds of graphs, which again can be export to data files like *.csv. I have a csv file, which contains data in X and Y axes. How can I import this data file into Multisim, and make it displayed in a graph?
Thanks in advance.

Hi,
The Piecewise linear source (PWL) accepts data as voltage or current vs. time. You can find this part by selecting Place>>Component, go to the "Sources" group then select "Signal voltage sources". Place this part on the work area, double-click on it and there should be an option to open a .txt file.
Tien P.
National Instruments

I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. Please help!

I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. I recieved a photo via text on my iphone and then I synced my iphone to my macbook and now it is in iphoto. I already know that the date on the photo per the tag that shows up on it in iphoto is NOT the date the photo was actually taken. I need article or literature or something confirming the tag is from when it was sent to the iphone and/or when it was imported. I greatly appreciate some assistance!

All I am trying to do is find something on a forum board or article etc stating that the the date showing in iphoto could be the date it was imported or synced or sent to me and not the actual date taken.
The date on the photo could be anything because you can edit the date with iPhoto or any of 100 apps, free and paid for. So, the date on the photo will prove nothing, I'm afraid.
Regards
TD

When I import a text file(comma separated )into a numbers spread sheet all the data goes into one column. Why does the text not go into separate columns based on the commas.

When I import a text file(comma separated) into a numbers spreadsheet all the data goes into one column instead of individual columns based on the comma separators. Excel allows you to do this during the import.. Is there a way to accomplish this in numbers without opening it in Excel and the importing into Numbers.

Your user info says iPad. This is the OS X Numbers forum. Assuming you are using OS X… Be sure the file is named with a .csv suffix.
(I don't have an iPad, so I don't know the iOS answer.)

XML files imported into SPRC are not properly loading associated data into SPRC

Hi EHS Gurus,
My Issue is - XML files imported into SPRC are not properly loading associated data into SPRC .
When am uploading the XML files manually its working fine in /TDAG/CPM00.
The same when we are uploading the XML files thru basis program IPC (XML) Documents into SAP , its not working .In XMl file it showing its complaint the same time compliance workbench complaint statues it showing empty .
for you reference pls see the attached screenshot .
Pls can you help me on this .
Regards,
Suresh.

Hi EHS Gurus,
My Issue is - XML files imported into SPRC are not properly loading associated data into SPRC .
When am uploading the XML files manually its working fine in /TDAG/CPM00.
The same when we are uploading the XML files thru basis program IPC (XML) Documents into SAP , its not working .In XMl file it showing its complaint the same time compliance workbench complaint statues it showing empty .
for you reference pls see the attached screenshot .
Pls can you help me on this .
Regards,
Suresh.

How do i import excel data base into pdf form drop down field

Hi,
I have a table of about 2500 rows and three columns that i would like to import into a drop down window on a PDF form to be self populated when item selected rather than entering the data. How can this be done?
Thanks!
Richard

Hi,
I did not know only two entries for each option item is it. I have manually entered data in the drop down an list boxes. With 2500 lines of data I was hoping there was an easier way other than manually entering the data.
I have no knowledge of Java Scripting.....
I was just wondering if there was a way from an Excel spreadsheet to import that data into a PDF form to be selectable to populate PDF fields in a form. It doesn't sound like it.
Thanks......

Import data Automatically into SAP

Hi all,
Is is possible to import data Automatically in SAP?
For Ex: if the client having online filling form (through website) is is possible to upload data directly into SAP?
one getting the alert or approval they will add the document.
Regards
Anish

Hi Anish,
This can be done through scheduled DTW job.
Thanks,
Gordon

Photos recently changed from sequential numbering to date/timestamp. When I import into apps for editing they are out of order. What can be done to change back to sequential numbering instead of date/timestamp?

Photos recently changed from sequential numbering to date/timestamp. When I import into apps for editing they are out of order. What can be done to change back to sequential numbering instead of date/timestamp?

The date information is taken from the camera which writes it to the file. This needs to be set to the correct date and time in the camera itself.
The order the images are shown in the Library mode is set by clicking on the sort button in the tool bar, which if not showing can be activated from view, tool bar. There are different sort orders that can be applied including sorting by file name. You can also sort by dragging the images to the order you wish them to appear in by selecting user order.

Import data backup into another DB instance

Hello all.
I need to import a Data Backup into Another Database instance. MaxDb version 7.3.
On higher versions of MaxDb I performed this operation without any problems (http://help.sap.com/erp2005_ehp_04/helpdata/EN/43/d5ebc2c9ed3ab3e10000000a422035/frameset.htm).
For this version of MaxDB I have such problem:
the commands don't coincide with help description, I define backup template, transfer DB instance to admin state, open utility session and try to srart recovery (there is no command db_activate RECOVER <template>)
dbmcli on Q46>util_connect
OK
dbmcli on Q46>recover_start DEMO
ERR
-24988,ERR_SQL: sql error
-903,Message not available,blockcount mismatch
What I can do? How can I start recover from data backup from another DB on this version of MaxDB?

I have tried to perform backup of original system and recovery to another database one more time.
There is the another error:
dbmcli on Q46>recover_start DemoD46_recover
ERR
-24988,ERR_SQL: sql error
-3014,Invalid end of SQL statement

11G data import into 9i db

Similar Messages

Maybe you are looking for