11g database compatible with 10g ASM?

Hi all,
I have one server with Oracle 10g database and ASM installed. Now I need to install a new database on 11g version. Know you if my new 11g database can use the 10g ASM? Or I need to create a new ASM in 11g too?
Thanks in advance,
Jordi

PLease look at the following link. The 11g Database is indeed going to work with 10g asm but the features available will vary depending on the version compatibility.
http://download.oracle.com/docs/cd/B28359_01/server.111/b31107/asmdiskgrps.htm#CHDJDDFG
HTH
Aman....

Similar Messages

Logical Standby Database with 10g+ASM on both sides??

Hi out there,
is there a known way to establish a logical standby database on 10g, if both
sides are running with an ASM setup?
I've tried to create one out of a physical standby database (which is set up
and running w/o any problems), like a book suggested me to do.
The procedure was:
1. switch on supplemental logging
2. prepare initiation parameters (for archive logging etc.) on both sides for
logical stb.
3. shut down the phyiscal standby
4. alter database create logical standby controlfile as '<path>'; on the
primary, transfer the controlfile to the standby db. Here I had to use RMAN
to copy the controlfile into the ASM System, and modify the initfile/spfile
in order to use the controlfile. No problem so far.
5. mount the standby database, alter database recover managed standby database
disconnect; -> At this point, the alert log complained about non-available
datafiles.
6. alter database activate standby database; --> fails ("needs recovery") due
to last point.
The trouble is, the controlfile created at point 4 cointains wrong paths to
the datafiles. Since I can not have the same disk group name on the standby
system, and since ASM renames the stored datafiles by its own, the complaints
of point 5 are comprehensible, but nevertheless annoying.
I tried to backup a controlfile to trace and change the paths, but at after
mounting the standby with this controlfile and proceeding at point 5, the
system says "<path> is not a standby controlfile"
Is there a different way of creating a "Logical Standby Database with 10g+ASM
on both sides"? Metalink said nothing about LogStby and ASM.
Best regards and thanks in advance,
Martin

I'm not sure if this will work but try:
1. create trace control file (you did it)
2. change paths (you did it)
3. recrate control file (you did it)
... there was error occured during mount before
so mount database (not as standby)
4. create standby control file (from recreated control file)
5. shutdown instance, replace control file with new standby control file or replace the control filename in parameter file.
6. mount as standby
What happend?
Update: Tested on my side and it has worked fine... How about you?
Message was edited by:
Ivan Kartik

Discoverer 3.1 compatible with 10g Database?

Please confirm or deny that Discoverer 3.1 is compatible with 10g Database?

Hello
Discoverer 3.1 is no longer supported, and we do not certify it against newer database or operating system versions. Therefore it is not possible for us to confirm or deny whether Discoverer 3.1 would work with the Oracle10g database.
Regards
Discoverer Product Management

Can I use Oracle 11g Developer tools with 10G and XE

Hi, I want to use Oracle 11g ODAC 11.1.0.6.21 with Oracle Developer Tools for Visual Studio with 10g and Xe . Will there be any issues. I want to do so because I am not able to see Oracle Database project in Visual Studio when I install Oracle 10 g developer tools wherein I see that in Oracle 11g developer tools. Please suggest.

No there are no issues. Just be sure to install ODT in a separate location than where XE is installed.

How to connect DataBase 9i with 10g Developer Suit

Hi Every body , how i connect
Oracle9i Enterprise Edition Release 9.0.1.1.1 DataBase with 10g Developer Suit ????
when i'm trying to run my program i just can run it for the first time :( . when i'm
trying to run it for the second time i receive this msg
<html> <head> ORACLE FORMS.</head>
<body onload="document.pform.submit();" >
<form name="pform" action="http://ABUKARAKI.AHU.EDU.LOCAL:8889/forms90/f90servlet" method="POST">
<input type="hidden" name="form" value="C:\Documents and Settings\Admin\Desktop\MODULE1.fmx">
<input type="hidden" name="userid" value="tt/tt@oracle">
<input type="hidden" name="obr" value="yes">
<input type="hidden" name="array" value="YES">
</form> </body></html>

Create your forms working directory.
add that path to default.env
and also edit parameter in formsweb.cfg to point to you main form.
This way by default when you go to http://ABUKARAKI.AHU.EDU.LOCAL:8889/forms90/f90servlet it will open your main form.
From main form you can open your other forms.

Is Oracle database Compatible with Times Ten database?

Hello All,
I need to use a temporary database in Oracle for some months.
Later on, I will need to migrate all data to a Times Ten database.
1. My doubt is if Oracle and Times Ten databases are compatible with
each other (specially when having this kind of cases) ?
2. In case the answer is YES to question 1, I would like to know if there are some
restrictions in that compatibility (type of data, any other issue, etc)
Best Regards
Rubén

Ruben,
There are two areas you shoul look into regarding your project: SQL functionality and data types. TimesTen 6.0 supports a subset of the SQL features and data types currently available in the Oracle DB; also, TimesTen supports some native numberic data types that are not available in the Oracle DB.
If your end-game is to use the TimesTen database, then I would start with the TimesTen API and SQL Reference Guide (http://www.oracle.com/technology/documentation/timesten_doc.html)
Use the SQL functionality documented for TimesTen and pay attention to the common data types. For example, VARCHAR is handled differently from VARCHAR2 (where trailing spaces exist), DATE and Timestamp are handled differently, etc. Additionally, keep in mind most numeric values are declared using NUMBER in the Oracle DB, but not in TimesTen.
If you are an existing TimesTen licensed customer, please let us know your support ID(CSI) and we can contact you with more information on our future release plan to address SQL and data types compatibility.
By the way, what's the timeline for your project?
-scheung

Websphere 5.0 compatible with 10g?

Hi,
Anybody know if Websphere 5.0 works with 10g?
Thanks

Found it (had to post the question to find it...)
You can find it at:
https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000047479&_SCENARIO=01100035870000000202&
Minimum plug-in level is PI 2004.1 with support package SP 10.

11g Database Migration with Old 10g Application server

Hi,
Our Database version : 10.2.0.3.0 10gR2
Oracle Application Server - 10gR2.
Now we are planning to migrate our database from 10gR2 to 11g R2. But now we are not going to migrate our Application server. We are continued to use same 10gR2 application server.
Please provide me what are the pre-checks/ Checklist/ knows issues/ obsolete features i must taken care before and after migrate- from the forms&reports developer and application server admin point of view.
for example some where i seen that the DB Password for 11g is case sensitive so we have to set a variable in form env file like that.
Thanks in advance.

Hi
As a general rule, most sql will perform as fast (or faster) on 11gR2 than 10gR2 - there will always be exceptions that's depends upon each one's application So best choice is to perform a test to ur whole project application. Because as u will find out may be someone has a problem but will not face u because of different application, concepts of handeling a solution for the bussiness requiremnets of the end use but it's nice Step to Rethink before u will be in a problem to pre-consider i appreciate :)
Well, i would also recommand Studing Oracle 11gR2 Upgrade Companion
http://www.google.com.eg/search?sourceid=navclient&ie=UTF-8&rlz=1T4ADFA_enEG418EG418&q=Oracle+11gR2+Upgrade+Companion
Hope u Study and Feed ur Knowlege through it...
Step by step Upgrade from 10gR2 to 11gR2
http://sarith.wordpress.com/2010/10/26/step-by-step-upgrade-from-10gr2-to-11gr2/
Best Regards,
Abdetu...

Refresh 11g database from existing 10g

hi
we are doing upgradation of 10g db to 11g and i have already cloned the 10g db to 11g using full datapump and since then we are working on 11g for additional application software .
now we need to studown 10g db and make 11g db in use. so i just need to refresh the 11g db with the changes we made to existing db sinse last time i cloned the db.
is full datapump is gonna work as it will drop everything and overrites it but we have created new tables and tablespaces for applications on 11g db ,so this will drop them too.
what is the effecting method to refresh the database.
thanks
gagan

Yes datapump will work here. In a clean way you can just drop all the objects and import the new copy in to it or else you can use import including table_exists_action with truncate option
Thanks
Sravya

Import oracle 11g database into oracle 10g Server -

Hi guys,
We have a oracle db running on Oracle 11g. Now, we would like to export from oracle 11g into Oracle 10g XE for important demo. Is it possible??
When i try to import into Oracle 10g XE, the following Error msg appears :
IMP-00010: Not a valid export file, header failed verification
Pls help soonest possible...
tx
Rama

A BIG thank you to both of you, Managed to import succesfully. appreciate your help.
Just for others who would be using this forum.
Steps involved
1. connect with Oracle 10g Export utility to the source db.
2. export the db from source to target server
3. create DDL & schema of the source db.... ( i used toad dba )
4. run the DDL & schema of the target db (oracle 10g) .. ( i used toad dba )
5. import the dump to target server.
6. done...
thanks.

Is 9i db compatible with 10g AS

We have a three-tier application:
Tier 1: Client using Web deployed forms using Jinitiator
Tier 2: Oracle 9i Application Server (on Windows)
Tier 3: Oracle 9i Database (on Unix)
We want to upgrade Tier 2 to Oracle 10g Application Server. Do we also have to upgrade our database to 10g or with 10gAS work with 9i Database?

Thanyou for you're swift reply. As iam not exactly offay with mobile phone technology,does this mean that I wont be able to purchase iphone in the states until at&t sell it as pay as you go? If that is so,would be able to change be able to change to O2 in the uk,or would he be tied into an At&t contract. Many thanks. Stephen N.Ireland.

11G CRS Compatible with 10GR2 RDBMS ?

I am testing the following configuration. When installing RAC version 10.2.0.1 EE of the RDBMS I received an error on the preinstallation checks because the CRS was Oracle 11.1.0.6.
Is the following software stack supported and compatible?
CRS -> 11.1.0.6
ASM -> 11.1.0.6
RDBMS -> 10.2.0.3
This is on AIX 5.3, but I don't think that's pertinent to this question.
Thanks for your insights.
-Reid

Error during pre installation checks of the OUI:
Checking Oracle Clusterware version ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The 'active' version of Oracle Clusterware is not 10g Release 2
(10.2).
Recommendation: You must upgrade all nodes of the cluster to Oracle Clusterware 10g Release 2. If you have upgraded some but not all of the nodes
to use the 10g Release 2 version of Oracle Clusterware, then the 'active'
version is still 10g Release 1 (10.1) You must upgrade all nodes in the
cluster to Oracle Clusterware 10g Release 2 before installing Oracle 10g
Release 2 Real Application
Clusters.
=======================================================

Oracle 11g database installation with 6GB SGA and 1GB PGA on x86 dell machn

I am trying to install oracle 11g on a DEL 2650 PowerEdge machine and want to set set SGA 6GB. I have set the shmmax kernel parameter 6449050944. Whenever i set the SGA size to 6 GB it display an error.
Can anybody guide me where i am wrong ?

O/s is Linux AS4 and total memory is 8 GB.
I just purchased this old refurbished dell poweredge 2650 for testing purpose.
Want to utilize the maximum memory available for the database.
swap is 8 GB too.

Installing Discoverer with Database Version Oracle 10g Express Edition

Hello,
Is it possilbe to install Discoverer with database version Oracle 10g Express Edition? I have Oracle Fusion Middleware 11.1.1.1.0 on my Windows XP machine as well. If so, can someone please provide me a link to the Discoverer download.
Regards,
Kelly

Note that the Personal Edition of the database is 'the most powerful' version, in that it contains all features and options of the Enterprise Edition (expect RAC and Enterprise Manager packs)
As such, the Personal Edition, at a mere USD$400-500 is one of the most cost effective for-fee products that Oracle has in it's inventory. It is targeted at the developer. And it comes with the complete set of Sample Data, whereas XE has a very limited subset (since it does not support all functionality).
Express Edition is indeed free, but it is not supported, and can not be patched. OTOH it does have a lighter footprint.
Again, I am not sure whether Disco 11g is compatible with Express Edition. (It's on my schedule for December ...)

SQL Developer 3.0.04 generated scripts not compatible with Oracle 10g (XE)

HI,
I tried to do an export from one XE database (still 10g) to another XE database. (also 10g).
I tried to do a database copy as well as a separate export and import (by loading the file and running as a script).
Neither of them work without modifying the files as it seems that SQL Developer generates scripts that are only compatible with Oracle 11g.
- Create table contains "segment creation automatic"
- Storage clauses contain parts that are not compatible with 10g
I ran through the wizard several times but neither can I find an option to choose for compatibility with earlier versions of Oracle.
Checked the preferences screen as well.
Is this a well hidden option or is it not possible to make this work for 10g.
Extra : found workaround by removing the storage clause to the export. Is there another way that does not force me to remove the storage clause?
Edited by: kcaluwae on 24-jun-2011 6:03

I'm sure this is far from the supported way to fix this but, seeing that it's apparently an issue with the classpath or something in it, I hacked <sqldeveloper_install>\sqldeveloper\bin\sqldeveloper.bat and added [ORACLE_HOME]\jdbc\lib\ojdbc6.jar to the classpath. At least that gets me started with 3.0 and lets me create TNS connections.
I'd really appreciate a better solution, if any of you kind folks knows of something.
Thanks,
Kelly

11g database compatible with 10g ASM?

Similar Messages

Maybe you are looking for