11g Em Could not resync with catalog database

Hai, I have installed 11g oms and added 2 nodes. the agents are uploading regulary and i can manage the 2 target successfully without any problem.
In one of the node I have installed recovery catalog and the same catalog has been added in the EM Grid control.
Manually I have registed the 2nd db to the catalog of the 1st node and manual rman backup and recovery using catalog is fine.
But in the EM Grid control I could not resync the db to the catalog . It throws the error message as follows.
Resynchronize Catalog
Validation Error
Examine and correct the following errors, then retry the operation:
Error - Connection to host as user oracle failed.
Please help me.
Thanks
Ashokan

If agent is windows then you need to setup the logon as batch privilege as below
1Go Control Panel, Administrative Tools.
2. Click on Local Security Policy.
3. Local Policies, User Rights Assignment.
4. Double click, 'Log on as a batch job'
Here provide username along with domain name like co.uk\foo

Similar Messages

  • Problem with Cisco Bars after Database Republish ("Could not find Cisco Unified database on this server")

    OS Version: 2000.4.3a
    OS Service Release: 2000.4.5bSR21
    OS Upgrade: 2000.4.5a
    Bars Version: 4.0.15000
    CUCM Version: 4.2(3)sr4b
    During the upgrade process of our CUCM 4.2(3) to version CUCM 4.2(3)sr4b the database replication between our 2 servers (1x pub, 1x sub) failed. After fixing this via dbhelper tool (everthing´s green and smiling again) service seemed to be ok.
    But now Cisco Bars does not work anymore. The backup process of the publisher fails with "Error=[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL-Server connection." So it looks like some kind of database setting for bars  is misconfigured after the republishing process.
    Yesterday I tried to reinstall BARS (now in the newest version 4.0.150000), but the same error message occured. Now I get the message "Could not find Cisco Unified database on this server" when I try to configure the Backup source within BARS.
    Curiously the backup of our second CCM (sub) works as expected (but without CDR and TFTP Data). The "BackAdmin" User exists and is not locked (and wasn´t changed manually at all).
    I am runnig out of ideas... :-(
    Any hint or idea on how to fix this is kindly appreciated
    best regards
    Michael

    Mike,
    I don't have anything definitive here but I am wondering if there is a discrepency between the database names.  In SQL Enterprise Manager, you can go to the Publisher and see what the current database name is.  It will be the one being replicated and will take the form of CCM0300 or CCM0301 or CCM0302.  You should see more than one.  Anyway, take note of the name.
    Then on the Publisher launch regedit and go to HKLM\Software\Cisco Systems, Inc.\DBL\
    Look at the values for DBConnection0 and DBConnection1.
    It will be something like DSN=CiscoCallManager;Server=;DATABASE=;Trusted_Connection=yes
    Does the in the DSN match what you expect?
    Also, going to back to SQL Enterprise Manager, check out the permissions on the database (Right Click->Properties, go to Permissions tab).
    Another thing to check if you think it is permissions related is the AdminUtility.exe (c:\program files\cisco\bin\).  This can be used to resync system account passwords.
    TBH, I am just shooting in the dark here but these are things I would check.
    Regards,
    Bill

  • Database Signon: Could not sign on to database PSH92DMO with user PS

    I am trying to instal peoplesoft HRMS 9.2 on Win2003(64bits) and Oracle 11g release 11.2.0.1.0 - 64bits.
    TUXEDO : 11.1.1.2.0 WITH VS2010
    FRAMEWORK : V4.0
    WEBLOGIC : 10.3.6.0
    JAVA JDK 7 UPDATE 9 for Win x64
    PEOPLETOOLS : 8.53 (directory c:PT8.53)
    vARIABLE
    PS_CFG_HOME
    VALUE :C:\PT8.53\bin\client\winx86;C:\PT8.53\bin\server
    PS_HOME
    C:\PT8.53\bin\client\winx86;C:\PT8.53\bin\server
    I installed
    1-Oracle Database
    2-Tuxedo
    3-Weblogic
    4-PeopleTools
    5-HRMS Application
    Create Database and run the scripts
    Import the datamover scripts
    But when I configure the application server appears the error below
    APPSRV LOG :
    PSADMIN.27292 (0) [2014-01-20T17:44:01.910](0) Begin boot attempt on domain PSH92DMO
    PSAPPSRV.28248 (0) [2014-01-20T17:44:12.644](0) PeopleTools Release 8.53 (Windows) starting. Tuxedo server is APPSRV(99)/2
    PSAPPSRV.28248 (0) [2014-01-20T17:44:12.707](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.53\appserv\PSH92DMO\CACHE\PSAPPSRV_2\
    PSAPPSRV.28248 (0) [2014-01-20T17:44:13.910](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PSH92DMO with user PS.
    PSAPPSRV.28248 (0) [2014-01-20T17:44:13.925](0) Server failed to start
    PSADMIN.27292 (0) [2014-01-20T17:44:20.378](0) End boot attempt on domain PSH92DMO
    Setup application server
          Features                      Settings
         ==========                    ==========
      1) Pub/Sub Servers   : Yes   16) DBNAME     :[PSH92DMO]
      2) Quick Server      : No    17) DBTYPE     :[ORACLE]
      3) Query Servers     : No    18) UserId     :[PS]
      4) Jolt              : Yes   19) UserPswd   :[ps]
      5) Jolt Relay        : No    20) DomainID   :[TESTSERV]
      6) WSL               : Yes   21) AddToPATH  :[C:\app\Administrator\product\11.
    2.0\dbhome_2\BIN]
      7) PC Debugger       : No    22) ConnectID  :[people]
      8) Event Notification: Yes   23) ConnectPswd:[]
      9) MCF Servers       : No    24) ServerName :[]
    10) Perf Collator     : No    25) DomainConnectPswd:[]
    11) Analytic Servers  : Yes   26) WSL Port   :[7000]
    12) Domains Gateway   : No    27) JSL Port   :[9000]
                                   28) JRAD Port  :[9100]
    Can anybody please help me?

    Thank you for the answers
    But ,i made the changes, same error
    Quick-configure menu -- domain: PSH92DMO
          Features                      Settings
         ==========                    ==========
      1) Pub/Sub Servers   : Yes   16) DBNAME     :[PSH92DMO]
      2) Quick Server      : No    17) DBTYPE     :[ORACLE]
      3) Query Servers     : No    18) UserId     :[PS]
      4) Jolt              : Yes   19) UserPswd   :[PS]
      5) Jolt Relay        : No    20) DomainID   :[TESTSERV]
      6) WSL               : Yes   21) AddToPATH  :[C:\app\Administrator\product\11.
    2.0\dbhome_2\BIN]
      7) PC Debugger       : No    22) ConnectID  :[people]
      8) Event Notification: No    23) ConnectPswd:[peop1e]
      9) MCF Servers       : No    24) ServerName :[]
    10) Perf Collator     : No    25) DomainConnectPswd:[]
    11) Analytic Servers  : No    26) WSL Port   :[7000]
    12) Domains Gateway   : No    27) JSL Port   :[9000]
                                   28) JRAD Port  :[9100]
    ERROR
    Booting server processes ...
    exec PSWATCHSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -ID 46611 -D TESTSER
    V -S PSWATCHSRV :
            process id=58888 ... Started.
    exec PSAPPSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" [email protected] -- -D TESTSE
    RV -S PSAPPSRV :
            CMDTUX_CAT:1685: ERROR: Application initialization failure
    tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha
    ndler
    tmshutdown -qy
    LOG TUXEDO
    133036.WIN-1DTPDIA3H9P!PSAPPSRV.58332.58456.0: 01-21-2014: Tuxedo Version 11.1.1.2.0 with VS2010, 64-bit
    133036.WIN-1DTPDIA3H9P!PSAPPSRV.58332.58456.0: LIBTUX_CAT:262: INFO: Standard main starting
    133037.WIN-1DTPDIA3H9P!PSAPPSRV.58332.58456.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
    133037.WIN-1DTPDIA3H9P!tmboot.58844.59328.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
    133041.WIN-1DTPDIA3H9P!BBL.57376.58876.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
    133044.WIN-1DTPDIA3H9P!PSADMIN.59216: End boot attempt on domain PSH92DMO
    LOG APPSRV
    PSADMIN.59216 (0) [2014-01-21T13:30:25.689](0) Begin boot attempt on domain PSH92DMO
    PSAPPSRV.58332 (0) [2014-01-21T13:30:36.533](0) PeopleTools Release 8.53 (Windows) starting. Tuxedo server is APPSRV(99)/2
    PSAPPSRV.58332 (0) [2014-01-21T13:30:36.611](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.53\appserv\PSH92DMO\CACHE\PSAPPSRV_2\
    PSAPPSRV.58332 (0) [2014-01-21T13:30:37.830](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PSH92DMO with user PS.
    PSAPPSRV.58332 (0) [2014-01-21T13:30:37.830](0) Server failed to start
    PSADMIN.59216 (0) [2014-01-21T13:30:44.174](0) End boot attempt on domain PSH92DMO
    file stderr is empty

  • Could not signon to the database with user VP1!!

    Hello All,
    people tools : 8.53 - windows 7, my local one
    peoplesoft application: HRMS 9.2 version -- oracle linux OS
    oracle 11g database -- oracle  linux OS
    when i start the app server domain for HSMS application using psadmin, its not starting
    when i look for appserv logs, i got this error
    Password has expired
    could not sign on to database with user vp1
    i can able to login into the database, and able to connect to SYSADM schema also
    so i tried manually updated the password operpswd in sysadm.psoprdefn table as VP1 and updated,. committed.
    and tried to connect to database using datamover to encrypt the password in my local machine, it says tns could not find the id specified
    but i can able to ping to linux database , tnsping is working, and i can able to establish a database session from my local one to linux server.
    Still unable to start the HRMS application domain in linux server
    kindly help.
    Regards.

    oops sorry Nicolas. ITs my typo mistake.
    Its peoplesoft finance application. not the hrms. and user id and password is VP1/VP1 was set during implementation.
    After implementation , we have not used the application for some months. I think that may be the reason for password expire.
    the following are the error:
    File: sql access ManagerSQL error . stmt #: 2 Error Position: 0 Return:28001 - ORA 28001: the password has expired
    SQL Access Manager: File: SQL Access ManagerSQL error. stmt #: 2 Error Position: 0 Return: 2 ORA 28001: the password has expired
    Database Options: override_connection_reset:0
    Database Signon: Could not sign on to database PSFNDEMO with user VP1
    Server failed to start
    End boot attempt on domain PSFNDEMO
    i also performed the steps pointed by Hakan in your blog
    On The Peoplesoft Road: Peoplesoft passwords
    Still no luck.
    kindly suggest
    Thanks.

  • What's wrong with this MySQL connection? "Could not create connection to database server"

    I'm able to connect to other MySQL databases but this one particular remote MySQL connection isn't working and I cannot figure it out.  It probably has something to do with the remote server, not CF, but I thought I'd post it here if anyone had an idea.  The MySQL account has full priviledges.
    Here is the message when I try to validate the data source:
    Connection verification failed for data source: test
    com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException:  Could not create connection to database server. Attempted reconnect 3  times. Giving up.
    The root cause was that:  com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException:  Could not create connection to database server. Attempted reconnect 3  times. Giving up.

    This happened on two servers.  One one, the cause was that skip-networking was turned on.  In the other situation, it appears that the database name was case sensitive, so TEST was not the same as test.  Even though I edited the data source in the CF administrator, it still didn't work (very misleading).  When a coworker entered a new data source with the same information (uppercase database name this time from the start), it worked.
    Has anyone else seen this problem with the case sensitive database names?  And with the data source in CF not updating the case correctly?  Seems like a bug in CF.

  • Could not connect to Oracle database. (HY000): BI Answers Problem

    Hi,
    I am using OBIEE 11g and 11g admin client tool is installed in my machine. I created one rpd and I deploy that rpd in the server through Enterprise manager fusion middleware control. But when try to run the analysis from BI answers it throws and error like
    "TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)".
    In the rpd I use OCI default (10g/11g) and cheked that connection is successful and also when I click on view data option in the physical layer I am able to see the data. I cheked with DBAs and correct TNS entries are also there in the server. Could not understand where is the problem.
    Please help.
    Thanks
    Titas

    Try like this
    Call Interface: Default (OCI 10g/11g)
    Data source Name->localhost:1521/XE
    BTW: Whats the client bit version 32/64 bit, if you have 64bit and above is not working try with Oracle client 32bit.
    Pls mark correct/helpful if helps

  • Lightroom could not import this catalog because of an unknown error.

    OS 10.5.8
    (gb mem
    I have recently exported a catalog from my main database (on a mac) with about 700 photos.  Including negative  files
    We opened the catalog on a PC machine in the same version of lightroom. 3.5 camera raw 6.5.  The images were given new keywords and then exported as a Catalog  including Negative files.
    The original catalog has been deleted from the main database on the Mac.
    The  Catalog with the new keywords  saved across the network to the Mac.
    Permissions are open to everyone on the folder the Catalog is in.
    When I try and import the catalog in lightroom I can see the thumbnails, 
    However get this message. I’ve lost many hours trying to get the catalog bak into the main library.
    I can open the catalog on its own in  Lightroom, just when I try and import the catalog  I get the bellow message.
    I’ve tried importing saving to a new location
    Importing not moving the files
    Lightroom could not import this catalog because of an unknown error.
    I see others have had similar problems however do not see a clear answer.
    Has anybody a solution?
    Thanks Patrick

    I'm having this issue as well, and honestly I've *never* been able to get "import from catalog" to work. In my case I have a catalog created on my Windows 7 laptop in LR3.5. I've copied it to an external drive, plugged it into my PC running Windows 7 with LR3.5. And I get the "could not import this catalog because of an unknown error" message.
    I've confirmed every image in the catalog I am trying to import is accounted for and isn't "missing". There are no duplicate images between the exported catalog and the one I'm trying to import in.
    Thoughts?
    Neil

  • I keep getting the error:  "lightroom could not import this catalog because of an unknown error" when trying to import from a catalog?

    I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
    I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!! 
    I then tried exporting the needed photos to a new Catalog and that worked.  But then when I try to import them again from my Master *+ Catalog I get the same error again!!
    I also tried creating a new Master *+ Catalog and tried to import the Catalogs of each year into it and the same error happened again!!!
    Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

    This is a duplicate thread - see here

  • Could not load library for database connection LCA

    Hi,
    I am facing RFC connection prblem while connectiong to database. I have installed SCM5.1 and live cache in single server
    Please find the logs.
    Work process log:
    B Mon Jul 20 11:19:13 2009
    B  create_con (con_name=LCA)
    B  Loading DB library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll' ...
    M  *** ERROR => DlLoadLib: LoadLibrary(E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll) Error 126 [dlnt.c       241]
    M          Error 126 = "The specified module could not be found."
    B  *** ERROR => Couldn't load library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll'
    [dbcon.c      4731]
    B  ***LOG BYG=> could not load library for database connection LCA        [dbds#1 @ 1035] [dbds    1035 ]
    A
    A Mon Jul 20 11:21:58 2009
    A  GENER starting remote generation: /SAPAPO/OM_SYNC_LC_DB (requested by W1).
    B
    SM21:
    No shared library found for the database with ID LCA|
    No shared library found for the database with ID LCA
    /SAPAPO/OM17|/SAPAPO/OM_SYNC_LC_DB|K |SAP Web AS Problem|SBAC   |
    Documentation for system log message BY G :
    As well as the standard connection, an attempt was made to set up
    another database connection, under the specified ID. The Shared Library
    for this second database could not be found.
    The Shared Library is usually found in the the Executable
    directory (profile parameter DIR_LIBRARY) under the name dbs
    <dbs>slib<os_ext>. <dbs> stands for the database type and <os_ext>
    stands for the operating system-specific extension of the Shared
    Libraries.
    The database type is determined from the entry that corresponds to the
    specified DB ID in the table DBDCON. Check whether the data in this
    entry is correct.
    ST22
    Runtime Errors         DBIF_DSQL2_CONNECTERR
    Exception              CX_SY_NATIVE_SQL_ERROR
    Date and Time          20.07.2009 11:22:21
    Short text
    Error setting up a secondary database connection
    What happened?
    Connection to database system not possible with identifier "LCA".
    |----
    System environment
    SAP-Release 700
    Application server... "
    Network address...... "
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "8x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 8
    Shortdump setting.... "full"
    Database server... "
    Database type..... "ORACLE"
    Database name..... "SC7"
    Database user ID.. "SAPSC7"
    Terminal................. " "
    Char.set.... "C"
    SAP kernel....... 701
    created (date)... "Jul 6 2009 23:47:55"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "OCI_10201_SHARE (10.2.0.2.0) "
    Patch level. 50
    Patch text.. " "
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 701
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
    NT 6.0"
    Information on where terminated
    Termination occurred in the ABAP program "SAPLSLCAPPS" - in
    "LCA_EXISTS_LCA_ROUTINE".
    The main program was "/SAPAPO/TS_BATCH_RUN ".
    In the source code you have the termination point in line 23
    of the (Include) program "LSLCAPPSU05".
    The program "SAPLSLCAPPS" was started as a background job.
    Job Name....... "MACROS"
    Job Initiator.. "SC7GEN"
    Job Number..... 10222002
    The termination is caused because exception "CX_SY_NATIVE_SQL_ERROR" occurred
    in
    procedure "LCA_EXISTS_LCA_ROUTINE" "(FUNCTION)", but it was neither handled
    locally nor declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLSLCAPPS "; its source code begins in line
    1 of the (Include program "LSLCAPPSU05 ".
    Please help me to resolve the issue.
    Suraj

    Hi Natalia Khlopina,
    I have raised OSS message to SAP.
    Below is the information
    E:\usr\sap\SC7\SYS\exe\uc\Copy_ of_NTAMD64_15062009>sdbregview -l
    Server Utilities    e:/sapdb/programs      7.7.02.08     64 bit    valid
    DB Analyzer         e:/sapdb/programs      7.7.02.08     64 bit    valid
    PCR 7301            e:/sapdb/programs      7.3.01.21               valid
    PCR 7500            e:/sapdb/programs      7.5.00.42     64 bit    valid
    SAP Utilities       e:/sapdb/programs      7.7.02.08     64 bit    valid
    APO LC APPS         f:/sapdb/lcs/db/sap    6.00.004      64 bit    valid
    Redist Python       e:/sapdb/programs      7.7.02.08     64 bit    valid
    Base                e:/sapdb/programs      7.7.02.08     64 bit    valid
    JDBC                e:/sapdb/programs      7.6.03.02               valid
    Messages            e:/sapdb/programs      MSG 0.5010              valid
    ODBC                e:/sapdb/programs      7.7.02.08     64 bit    valid
    SQLDBC 77           e:/sapdb/programs      7.7.02.08     64 bit    valid
    Database Kernel     f:/sapdb/lcs/db        7.7.02.08     64 bit    valid
    Loader              e:/sapdb/programs      7.7.02.08     64 bit    valid
    SQLDBC              e:/sapdb/programs      7.7.02.08     64 bit    valid
    SQLDBC 76           e:/sapdb/programs      7.6.01.15     64 bit    valid
    Fastload API        e:/sapdb/programs      7.7.02.08     64 bit    valid
    C:\Documents and Settings\sc7adm>disp+work
    disp+work information
    kernel release                701
    kernel make variant           701_REL
    compiled on                   NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
    compiled for                  64 BIT
    compilation mode              UNICODE
    compile time                  Jul  6 2009 23:47:55
    update level                  0
    patch number                  50
    source id                     0.050
    supported environment
    database (SAP, table SVERS)   700
                                  701
    operating system
    Windows NT 5.0
    Windows NT 5.1
    Windows NT 5.2
    Windows NT 6.0
    Thanks for quick responce.
    Suraj

  • How to solve the error:  "lightroom could not import this catalog because of an unknown error" when trying to "import from catalog"?

    I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
    I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!! 
    Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

    OK, my starting point is that LR can happily contain 400000+ photos, and it's a mistake to create a 1 star plus catalogue as you suggest. Instead, I'd recommend you create a master catalogue of all your photos, which you can then query however you want - 2 star, or a certain keyword, or with "xyz" in the title etc.
    If you are intent on going that way, you could try a slight change from what you've done so far. Instead of trying to import an entire catalogue and then delete no-star pictures, take the 2014 and 2012 catalogues and select only the 1 star photos. Then do an Export as Catalog for these items, and import the 2014-1star and 2012-1star into your new catalogue. That may get you past the problem images which I suspect are the problem.
    If that doesn't work, or if you follow my initial advice, you're going to need to identify the image where the failure occurs. You may have a corrupt image file, and replacing it from your backup may be sufficient to resolve the problem. Alternatively, it may be a corrupt record in the catalogue, and in this case it may be sufficient to remove the image from the catalogue and import it again. You might try selecting everything in the 2014 catalogue and seeing if you can do an Export as Catalog, creating a clean 2014, and deleting 2014's previews folder might also get rid of a potential problem. Something else is to try the Export as Catalog for images 1-40000, then a second Export as Catalog for images 40002-50k.
    So a few things you'll need to try, rather than a magic bullet, and a recommendation to change the underlying direction.
    John

  • Application Server failed to start- Could not sign on to database HR91

    Hello there,
    I am not able to boot App Server Domain (started but the status is idle.) In the log, i also find the message that
    PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](0) PeopleTools Release 8.51 (WinX86) starting. Tuxedo server is PUBSUB(98)/100
    PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:53](0) PeopleTools Release 8.51 (WinX86) starting. Tuxedo server is PUBSUB(98)/200
    PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:53](0) PeopleTools Release 8.51 (WinX86) starting. Tuxedo server is PUBSUB(98)/300
    PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.51\appserv\HR91\CACHE\PSBRKDSP_dflt_100\
    PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA (200,0)
    PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HR91 with user PS.
    PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.51\appserv\HR91\CACHE\PSPUBDSP_dflt_200\
    PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA (200,0)
    PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HR91 with user PS.
    PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.51\appserv\HR91\CACHE\PSSUBDSP_dflt_300\
    PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA (200,0)
    PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HR91 with user PS.
    PSBRKDSP_dflt.452 (0) [04/01/11 23:35:54](0) Server failed to start
    PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](0) Server failed to start
    PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](0) Server failed to start
    Below is the information of my configuration file.
    [Startup]
    ;=========================================================================
    ; Database Signon settings
    ;=========================================================================
    DBName=HR91
    DBType=ORACLE
    UserId=PS
    UserPswd=PS
    ConnectId=people
    ConnectPswd=peop1e
    ServerName=HR91
    StandbyDBName=
    StandbyDBType=
    StandbyUserId=
    StandbyUserPswd=
    [Database Options]
    ;=========================================================================
    ; Database-specific configuration options
    ;=========================================================================
    SybasePacketSize=
    UseLocalOracleDB=0
    ;ORACLE_SID=
    EnableDBMonitoring=1
    PSDB Maximum Cursors=
    [Security]
    ;=========================================================================
    ; Security settings
    ;=========================================================================
    Validate Signon with Database=0
    DomainConnectionPwd=PS
    Also, i can use PS/PS log into the Datamover but can not use them to log into the application designer
    Any help will be appreciated...
    Thank you

    bandar wrote:
    When you have a oracle server running on the same physical machine, why do you need client to support your needs?
    As you said, your oracle client installation might be an error, u can always point BIN on app server to your server installation and start the server.That was true up to Oracle 11.1 because the 32bit librairies were shipped in ORACLE_HOME even if that one was a 64bit installation.
    It has been dramatically changed within Oracle 11.2 though. The 32bit libraries are not coming anymore within the Oracle 11.2 64bit, you have to explicitely install a 11.2 32bit client to make it work with Peoplesoft on Windows. And configure your Peoplesoft installation to work within that 32bit client.
    Consequently, if you have all together installed on the same server (Oracle database 11.2 64bit and Peoplesoft), you must have two Oracle homes : one for the 64bit database, one for the 32bit client.
    Nicolas.

  • The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error

    We are getting the below error when we see in Crawl logs
    "The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error."
    This is happening in FAST search.
    Here I can see soke of the logs related to this search crawl.
    Could anyone please help on this?
    web application 'http://xvy/' doesn't use search application 'FAST Query SSA', skipping it.
    ABC\sp_search' on web application 'http://xvy/'. 2d7dba01-3d2e-4903-b59f-9a8601627bcd
    07/30/2014 01:30:46.65  OWSTIMER.EXE (0x28DC)                    0x1BC0 SharePoint Server Search       Administration               
     dl2m Verbose  Search application 'Search Service Application 1': Skipping web application '48ed7882-9f70-424e-bf72-e3c9f5340b97' because its outbound url 'http://ebc:30347' was automatically added once.
    Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcp/'. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dl2m Verbose  Search application 'FAST Query SSA': Skipping web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' because its outbound url 'http://nvcp' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dl2n Verbose  Search application 'FAST Query SSA': Adding start address 'http://nvcp' for web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dmb6 Verbose  Ensure full read access to the indexing account 'ABc\sp_search' on web application 'http://nvcp'ext/'. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dl2m Verbose  Search application 'FAST Query SSA': Skipping web application '64d562a1-535e-4917-8979-88840e2a67fe' because its outbound url 'http://nvcp'ext' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dl2n Verbose  Search application 'FAST Query SSA': Adding start address 'http://nvcpext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
    07/30/2014 01:31:46.53  OWSTIMER.EXE (0x28DC)                    0x05F4 SharePoint Server Search       Administration               
     dmb6 Verbose  Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcpnew/'. 85041609-d618-4132-ac8e-195a910d99a0
    executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents}  [propdatabase.cxx:70]  d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx 
    07/30/2014 01:32:04.31  mssearch.exe (0x0588)                    0x1DE4 SharePoint Server Search       Propagation Manager          
     e3o3 Verbose  executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents}  [propdatabase.cxx:70]  d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx 
    07/30/2014 01:32:04.68  mssdmn.exe (0x15CC)                      0x1060 SharePoint Server Search       HTTP Protocol
    Handler          du4i                     0x29E4 SharePoint Server Search       HTTP
    Protocol Handler          du4i Verbose  CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353]  d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx 
    07/30/2014 01:32:04.70  mssdmn.exe (0x15CC)                      0x29E4 SharePoint Server Search       HTTP Protocol
    Handler          du54 High     CHttpAccessorHelper::InitRequestInternal - unexpected status (503) on request for 'http://ppecpnew/robots.txt' Authentication 0.  [httpacchelper.cxx:703] 
    d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx 
    07/30/2014 01:32:04.70  mssearch.exe (0x0588)                    0x130C SharePoint Server Search       Gatherer                     
     cd11 Warning  The start address http://nvcp'/sites/quipme cannot be crawled.  Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content'  Details: 
    The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200) 
    07/30/2014 01:32:04.70  mssdmn.exe (0x15CC)                      0x104C SharePoint Server Search       HTTP Protocol
    Handler          du4i Verbose  CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353]  d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx 
    07/30/2014 01:32:04.70  mssdmn.exe (0x15CC)                      0x104C SharePoint Server Search       HTTP Protocol
    Handler          du54 High  
    07/30/2014 01:32:04.70  mssearch.exe (0x0588)                    0x2948 SharePoint Server Search       Gatherer                     
     cd11 Warning  The start address
    http://nvcp'/sites/MDPPubng cannot be crawled.  Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content'  Details:  The crawler could not communicate with the server. Check that the server is
    available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200) 
     CHttpProbeHelper::ProbeServer: InitRequest failed for 'http://ppecpnew/_vti_bin/sitedata.asmx'. Return error to caller, hr=80041200  [stscommon.cxx:490]  d:\office\source\search\native\gather\protocols\common\stscommon.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     dvg0 High     STS3::COWSServer::InitializeClaimsCookie: Probing url 'http://pncvr' failed. Return error to caller, hr=80041200  [sts3util.cxx:1332]  d:\office\source\search\native\gather\protocols\sts3\sts3util.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     en0e High     CSTS3Accessor::InitURLType: Return error to caller, hr=80041200                 [sts3acc.cxx:2214]  d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     dv3p High     CSTS3Accessor::GetServer fails, Url sts4://pnvpr/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200  [sts3acc.cxx:185] 
    d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     dvb1 High     CSTS3Accessor::Init fails, Url sts4:/mngbv/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200  [sts3handler.cxx:312] 
    d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx 
    07/30/2014 01:32:26.06  mssdmn.exe (0x15CC)                      0x16FC SharePoint Server Search       HTTP Protocol
    Handler          du2z Verbose  CHttpProbeHelper::ProbeServer: Probing server with url 'http://pnvpr/_vti_bin/sitedata.asmx'.  [stscommon.cxx:476]  d:\office\source\search\native\gather\protocols\common\stscommon.cxx 
    07/30/2014 01:32:26.08  mssdmn.exe (0x15CC)                      0x193C SharePoint Server Search       PHSts                        
     dvb2 High     CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80041200            [sts3handler.cxx:330]  d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx 
    07/30/2014 01:32:26.08  mssdmn.exe (0x15CC)                      0x16FC SharePoint Server Search       HTTP Protocol
    Handler          du4i Verbose  CHttpAccessorHelper::InitRequestInternal - opening request for '/_vti_bin/sitedata.asmx'.  [httpacchelper.cxx:353]  d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx 
    earch application 'FAST Query SSA': Adding start address 'http://mnvfgext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dmb6 Verbose  Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvpr/'. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dl2m Verbose  Search application 'FAST Query SSA': Skipping web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' because its outbound url 'http://pnvpr' was automatically added once. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dl2n Verbose  Search application 'FAST Query SSA': Adding start address 'http://pnvpr' for web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dl2k Verbose  web application 'http://abcrsp/' doesn't use search application 'FAST Query SSA', skipping it. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
    07/30/2014 01:32:46.53  OWSTIMER.EXE (0x28DC)                    0x1444 SharePoint Server Search       Administration               
     dl2k Verbose  web application 'http://excb/' doesn't use search application 'FAST Query SSA', ski
    Anil Loka

    Hi,
    According to your post, my understanding is that you got error when communicating to the server.
    This happens when crawler is not able to connect to the server. Make sure server name is correct. Couple of steps to troubleshoot it
    You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
              Ping <servername>
          2.  You should be able to connect to the server using telnet command
    Telnet< servername> <port number>
    More information:
    Troubleshooting of FAST Search Configuration
    If the issue still exists, you can delete the old search application and recreate from the beginning.
    You can also reset the index and do a full crawl after.
    Here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/en-US/f3c61b53-304a-4c2a-a370-d0e573219d1d/an-unrecognized-http-response-was-received-when-attempting-to-crawl-this-item?forum=sharepointadminprevious
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • (2008 R2) AD RMS Installation Failure: ALTER DATABASE failed because a lock could not be placed on database

    First-time install on a SBS 2011 server, name replaced as <SERVER> for this post. I had created a separate IIS site rather than using the Default Web Site and I am guessing this might be a permission issue on the folder...
    Installation failed with Event ID 110 and a repeating error that states, "<Error>: Attempt to configure Active Directory Rights Management Server failed. The provisioning process failed to create the Configuration database due to the following
    error from Sql Server: System.Data.SqlClient.SqlException: ALTER DATABASE failed because a lock could not be placed on database 'DRMS_Config_adrms_<SERVER>_local_443'. Try again later. ALTER DATABASE statement failed. ALTER DATABASE failed because a
    lock could not be placed on database ." Configuration as follows:
    <Informational>: This server might need to be restarted after the installation completes.
    Active Directory Rights Management Services
    Cluster Type
    Root cluster
    Trust Hierarchy
    Production
    Configuration Database Server
    Windows Internal Database
    Service Account
    <SERVER>\adrms
    Cluster Key Storage
    AD RMS centrally managed key storage
    Cluster Web Site
    Active Directory RMS
    Cluster Internal Address
    https://adrms.<SERVER>.local:443/
    SSL Certificate
    Create a self-signed certificate
    Licensor Certificate Name
    <SERVER>
    Register SCP
    Register now

    Hi Ahmad, I have the same problem, I have a server windows server 2008 R2 standard. While
    doing an Enterprise to Standard downgrade, I have removed enterprise edition of SQL Server 2008, rebooted and while installing standard edition, I get the below error saying "You SQL server 2008 installation completed with failures. Some or all identity
    references could not be translated"
    Bit of background. This server has another express instance of SQL Server 2008. I have
    used local system account, network service as well as our general SQL service account, but I get the error towards the end of the installation and it fails saying “Some or all identity references could not be translated.”
    I am installing a named instance with the same name as before but fails. I have tried
    creating a new test instance that fails too. Any ideas? I have uninstalled SQL enterprise edition from
    Add and Remore Programs/Programs and Features. I've also run the Windows Installer CleanUp Utility but no joy.
    Cheers

  • Error Could not connect to the database - ora-12545: tns:name lookup failure

    Hi,
    I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
    Thanks, Mary

    Copy the tnsname.ora file from Oracle Database serve onto the client PC.
    Path: %Oracle_home%\net80\admin\
    Send me a mail if there is any other issues
    Regards
    Oluseyi Funmi Oduberu
    Oracle Consultant
    Email:[email protected]
    Hi,
    I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
    Thanks, Mary

  • The crawler could not communicate with the server on SharePoint 2010

    Dear Friends,
      we have two tier farm application and web is running in one server , and other one is database server, search crawling is not working  ,My search service application log giving these below errors ,  Can you please suggest me how to fix these
    errors and how to make the search crawling with out errors.This is very urgent friends, because I have these issues on production server. kindly help me to fix these issues as soon as possible.
    The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.
    An unrecognized HTTP response was received when attempting to crawl this item. Verify whether the item can be accessed using your browser.
    Please see the recent crawl history below, it is listed 124,062 24 errors.
    Crawl started
    Crawl completed
    Crawl duration
    Type
    Successes
    Warnings
    Errors
    Top Level Errors
    Deletes
    Not Modified
    Security Updates
    10/19/2014 11:55 PM
    10/20/2014 12:10 AM
    00:15:27
    Incremental
    0
    0
    124,062
    24
    0
    1
    0
    10/19/2014 10:55 PM
    10/19/2014 11:11 PM
    00:16:26
    Full
    1
    0
    124,062
    24
    valmiki

    thanks gain noddy, I found the actual problem now . It is crawling the site collection . but is not crawling the sub site. How to include sub site  to crawl  , I found this solution in Google , one suggested to do this but did not work out. 
    Can you please let me know how to include sub site to crawl its contents .
    The solution to this is frustratingly simple...
    At the root of the site, go to Site Actions >> Site Settings and choose Search and Offline Availability under Site Administration.
    Set the page indexing behavior to “Always index all Web Parts on this site”.
    Save and run a full crawl.
    valmiki

Maybe you are looking for

  • Can I config timesten not to hold all data in memory?

    In our production environment we use a server with 32GB memory to run Timesten, but developer machine only have 2GB memory. Now we are going to fix some issue that require duplicate the production data to Developer machine, can we have config timeste

  • Adobe Flash Player 11.7.700.169 crashes

    After installing Adobe Flash Player 11.7.77.169 Internet Explorer crashes on any page that uses flash.

  • Connect Mac Pro to iMac

    I have a Mac Pro 1.1 with a fried video card. Can I connect the Mac Pro to an iMac via FireWire to read/copy the files?

  • Short dump in EXIT for ME21N

    Hi, In PO creation (ME21N/ME22N), i wanted to call custom report, mean while I have implemented one exit "MM06E005 ->EXIT_SAPMM06E_006", in that, I called Z-program, in which a statement call screen 100. is there, which is causing the short dump. Sho

  • I can't install anything on MacBook Pro - can anyone help?

    Dear All, I can't install anything on my MacBook Pro (OS X 10.6.8). For example, I'll download an update, which in turn opens an installer window. I select the destination for the installation. So far so good. But when I click on 'install', nothing..