11g Grid Control - Host Configuration Collection Problems

Hi Guys,
I just installed Oracle 11g Grid Control and it has been running for 2 weeks until I recently tried to walk through the parts of it.
My intention was to clear off all the error messages, critical warnings, alerts, and policy warnings.
When I arrived at the development summary box, on the home tab, I can see that there is 1 collection problem.
When I clicked it, I saw that apparently the problem is with the host where I installed the grid control.
Problem type: Warning during collection of Oracle Software
message: Unknown WLS Home Location or WLS Version in Middleware Home /u01/app/oracle/product/middleware
I tried clicking on the "Refresh Host" button, but it didn't solve the problem at all.
I have also tried to take a look at the targets.xml however it seems the configuration in there are already pointing to the correct path to the weblogic home.
Please let me know if anyone has a suggestion for this.
Searching from google doesn't really return anything closely matched to this.
Thanks,
Adhika

What is the intent/timeline for fixing this bug? On MOS, it appears to have a status of "Status 33 - Suspended, Req'd Info not Avail". We are encountering this bug also and I would glady provide information from our systems in order for the issue to be resolved.
Thanks.
PostScript: FWIW, Google yielded a blog referencing this error and Doc ID 1433113.1. I am unable to access that document (as was the blogger). Because of this, and another major caveat (our machines with this collection error do not have WLS installed on them), I'm thinking this probably needs to be an SR rather than a forum discussion.
Edited by: JeriF on Feb 4, 2013 12:00 PM

Similar Messages

  • Download problem with EM 11g Grid Control Release 1 (11.1.0.1.0)

    Hi all,
    I have problem with Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0) for Linux x86-64 (64-bit) downloaded archives.
    Actually with GridControl_11.1.0.1.0_Linux_x86-64_2of3.zip (1,589,671,704 bytes) (cksum - 535544209)
    I successfully downloaded all archives but cksum for this file (...2of3...) is invalid.
    Even it is invalid I tried to install. Installation starts ok, but it breaks after few moments.
    Regards

    Here is cksum from file that I downloaded 3966614633 and on download page is 535544209.
    It's obvious that something is wrong!
    Oracle personal should fix this issue.
    Anyhow, there is another way... Download from different location. See this thread:
    Re: Invalid Software Download from OTN for Grid Control 11g on Linux x86_64
    Regards

  • 11g Grid Control with Dataguard

    Hi ,
    I need to configure a 11g Grid Control with Dataguard for the repository, are there any documents that i can follow for configuring the dataguard
    for the Grid Control 11g, I am interested as how i would be setting up the tns entry in the OMS , since i had to do the failover / switchover etc of OEM Grid Control application across the standby .
    Kind regards
    Krish

    Hi,
    Please follow the document provided below:
    How to Configure the OMS Connect String when Repository is in a Dataguard setup (Doc ID 1328768.1)
    Let me know, if you are looking for the same document.
    Best Regards,
    Venkat

  • OEM 11g grid control - Question

    Dear DBA's,
    I'm using 11g grid control, RDBMS - 11.2.0.2 on RHEL 5.0
    My current setup : I have 4 node RAC database running on (node1, node2, node3, node4). My RMAN backup job in EM runs from node1.
    Preferred setup : I need to modify this job or create a new one (whichever is feasible) so that my backup job runs from (node3 or node4) instead of node1.
    Can you kindly suggest How can I modify the setup to meet my requirement?
    Thanks

    I made these changes in the RMAN script (In OEM JOB Parameters) and still see backup running from node1.
    I have recreated jobs (Changed ownership of these jobs from SYMAN to a different ID, which was also part of my task) and during Job creation, while adding targets (I chose target type as Database instance of node4 instead of Cluster database) This fulfilled my request. Thanks again for your reply.

  • Oracle 11g grid control software for Oracle Enterprise Linux 5.0 version

    Hi,
    Just curious to know when Oracle 11g grid control software for Oracle Enterprise Linux 5.0 version will be released. If already released, can you post the link?
    Regards,
    Manohar

    aadragna wrote:
    What is the best installlation document to follow for the latest EM Grid control ?The latest Grid Control is available for download at http://download.oracle.com (Scroll down to "Enterprise Management"). There is a README beside the download link. THAT README PROVIDES INSTALL INSTRUCTIONS.
    In a nutshell, you install the lowest version (10.2.0.1 or 10.2.0.2, which ever is lower for your Grid Control platform), and then apply the 10.2.0.5 patch according to the readme. That should not normally take more than a day.
    >
    Also, can GRID discover PeopleSoft and Siebel application software ?
    That can be found using the self-help portal: http://otn.oracle.com -> Products : Enterprise Management (left edge menu). In the 'Product Focus' area, you will notice 'Application Management' which will lead you to the appropriate data sheets and supporting information.

  • Disk 1 of Enterprise Manager 11g Grid Control not downloading correctly

    Hello, I'm downloading Enterprise Manager 11g Grid Control.
    The first disk, of three, does not download correctly:
    GridControl_11.1.0.1.0_Linux_1of3.zip
    On the web page, its size is listed to be around 1.3 GB.
    However, when downloading, it thinks its actual file size is only around 643 MB.
    So only that much gets downloaded.
    But after downloading, this .zip file cannot be opened, it does not appear to a valid .zip file.
    Please investigate and fix this.
    Thanks
    Eugene

    Please check from edelivery.oracle.com . You need to unzip all the zips under one dir.

  • Weblogic license required for 11g Grid Control?

    Weblogic is a pre-requisite for installing 11g Grid Control.
    if you do not have weblogic already, and your only requirement for it is to use for Grid Control, is a license for Weblogic required?
    I have raised an SR on this - and have been told a license is required.
    I'm staggered by this - the packs in Grid have always been licensable, but the very basic functionality has always been free - including the use of an 'infrastructure' database to house the repository.
    I'm interested to hear other peoples' experiences and whether this is a 'known' fact.

    I've already asked Oracle sales staff about it, but I don't want to mislead you.
    Could you remind them their restricted-use license?
    Grid Control includes a restricted-use license for the Oracle Database and Oracle Application Server components required to deploy Grid Control. Refer to Section 1.3.3,
    "Restricted-Use Licensing," for details on the restricted-use licenses
    This is the URL of the document: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14860.pdf
    I would be happy to hear from their answer.
    Regards
    Gokhan

  • How to add new host to 11g grid control

    I have install silently oem agent 11g in a solaris system. The installation was successful and agent is up and running.
    But the thing is I can't add this client and its database in my OEM Grid Control interface. When I try to add the target it shows the bellow error
    Information
    You cannot add a host target from Enterprise Manager Grid Control.
    To add a host target, install the Oracle Management Agent on the host computer you want to manage. When the Management Agent begins communicating with the Oracle Management Service, the Management Agent target and the Host target will appear in the list of targets.
    My Question is how i can the target's agent can communicate with OMS agent? and How this target can be incorporated?

    Hi,
    the host and agent targets should show up right after installation of the agent, if securing was successful. I assume the error happened somewhere there.
    Can you please paste the output of following command:
    $ORACLE_HOME/bin/emctl status agent
    where ORACLE_HOME is set to your newly installed agent?
    Also, please check if you see any errors in $ORACLE_HOME/sysman/log/emagent.log and emagent.trc about communication between the agent and your OMS.
    Best regards,
    Robert

  • Oracle 11g Grid Control failure at database credentials

    Hi ,
    I have the environment like Windows 2008 64bit machine. I have installed oracle database in one machine and in second machine , installed weblogic server then trying to install Grid control but
    I'm facing the issue when i give the database credentials , its throwing message like check that listener is up and running or not.
    I have checked everything is working.
    Error is : There was a problem connecting to the database on the host and port specified. Check to make sure the host is up or that the database listener is running on that host
    i have verified in the forums . but nothing worked for me. Could any one please help me out

    If you have not tested a sqlplus connection to the database as user sys from the host where you want to install Grid Control, then try it.
    Ex:
    sqlplus sys/<PASSWORD>@"(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=<HOSTNAME>)(PORT=<PORT#>)))(CONNECT_DATA=(SID=<SID>)))" as sysdba
    where:
    <PASSWORD>: the password of user sys as entered in the UI
    <HOSTNAME>: the host name as entered in the UI
    <PORT#>: the port number as entered in the UI
    <SID>: the SID as entered in the UI
    - Loc

  • 10g Grid Control Installation/configuration on RAC

    Hi Experts,
    I am new to RAC and I need your help.
    I need to configure 2 node RAC and install/configure Oracle 10g Grid control (High Availability) on HP-UX Itanium servers. Is there any good document or link?
    Thank You all in advance
    Bell

    Hi Bell,
    Here is the link for the 10gR5 Grid Control Installation Guide: http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm
    Considering the GC repository is a RAC database you will be performing the "+Using an Existing Database+" installation type.
    I would highlight the below part of the documentation:
    To view a list of certified Oracle Database, see Document ID 412431.1 on My Oracle Support (formerly Metalink).
    If you want to use a RAC database, which is configured on a virtual host, as the existing database, then refer to Document ID 561441.1 on My Oracle Support (formerly Metalink).
    HTH,
    Regards,
    Jozsef
    Edited by: Jozsef on Oct 22, 2010 12:14 AM

  • OEM 11g Grid Control installation for 10g R2 database

    Hi ,
    I am new with oracle enterprise manager grid control ,
    I have 3 questions ,
    1. My customer is using windows server 2008 with oracle 10g R2 database , can I install OEM 11g R2 to monitor all the 10g databases ?
    2. I found only 32 bit installers for windows , where as they are using 64 bit OS , is it fine to install 32 bit OEM in a 64 bit OS ?
    3. Do they require any separate license for OEM 11g , they have license for oracle 10g database ?
    I will really appreciate if someone can help me with these details , thank you.

    1. My customer is using windows server 2008 with oracle 10g R2 database , can I install OEM 11g R2 to monitor all the 10g databases ?
    Yes
    2. I found only 32 bit installers for windows , where as they are using 64 bit OS , is it fine to install 32 bit OEM in a 64 bit OS ?
    Yes
    3. Do they require any separate license for OEM 11g , they have license for oracle 10g database ?
    You don't need any license to use OEM 11g, however you do need licenses to use Management Packs
    Checkout:
    Oracle® Enterprise Manager Licensing Information
    11g Release 1 (11.1)
    http://download.oracle.com/docs/cd/E11857_01/license.111/e11987/toc.htm
    Regards
    Rob
    http://oemgc.wordpress.com

  • 10g Grid Control Installation/Configuration

    I want to install and configure the 10g grid control agent in our environment.
    Is there any step by step document for installation and configuration.

    [http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
    [Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
    http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
    HTH
    Anantha

  • Grid Control 11.1 install problem libXtst.so.6: cannot open shared object

    I have a new server installing Grid Control 11.1. Linux RHEL 5 rel 2 64 bit. Installed database 11.2.0.1 on this server (applied patch set 9352237). Installed JDK 1.6 (following note 1063587.1) and WebLogic 10.3 (note 1063112.1). When launching the Grid Control installer, I'm getting the following:
    reparing to launch Oracle Universal Installer from /tmp/OraInstall2010-05-11_12-21-44PM. Please wait ...[oracle@oracletest-100-96 gc_inst]$
    Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-05-11_12-21-44PM/jdk/jre/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
            at java.lang.ClassLoader$NativeLibrary.load(Native Method)
            at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1778)
            at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1674)
            at java.lang.Runtime.load0(Runtime.java:770)
            at java.lang.System.load(System.java:1003)
            at java.lang.ClassLoader$NativeLibrary.load(Native Method)
            at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1778)
            at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1695)
            at java.lang.Runtime.loadLibrary0(Runtime.java:823)
            at java.lang.System.loadLibrary(System.java:1028)
            at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.awt.Toolkit.loadLibraries(Toolkit.java:1592)
            at java.awt.Toolkit.<clinit>(Toolkit.java:1614)
            at java.awt.Font.<clinit>(Font.java:210)
            at oracle.sysman.install.oneclick.EMGCInstallStaticVariables.<clinit>(EMGCInstallStaticVariables.java:324)
            at oracle.sysman.install.oneclick.EMGCInstaller.parseCommandLineArgs(EMGCInstaller.java:503)
            at oracle.sysman.install.oneclick.EMGCInstaller.init(EMGCInstaller.java:201)
            at oracle.sysman.install.oneclick.EMGCInstaller.main(EMGCInstaller.java:992) I've checked to make sure that lixXp is installed:
    [root@oracletest]# rpm -qa --qf "%{NAME}-%{VERSION}-%{RELEASE}.%{ARCH}\n" | grep libXp
    libXpm-3.5.5-3.x86_64I know this is just a DISPLAYor xterm issue, but I can't figure out what the issue is. The installer for the database (11.2.0.1) in the same session launches without error. I've tried running the installer with --ignoreSysPrereqs passed and same issue.  Is there a library mismatch somewhere?  Is the installer for Grid Control that much different from that of Database 11.2.0.1 (apparently, since the database installer launches while grid control doesn't).  What obvious things am I missing in checking?
    Edited by: kellypw on May 11, 2010 11:17 AM

    I too had the same issue on linux. Check whether libXtst package is installed or not. Also, close the existing session and open a new window after the installation of the package.
    Package "libXtst (i386)" in RHEL/OEL 5 will be automatically installed with "Default RPMs" installation type. If RHEL/OEL 5 is not installed with "Default RPMs" Installation type, then please install missing package "libXtst (i386)" and then re-try.

  • 11g Grid Control in a cluster?

    Hi All,
    I am trying to find some official doc on how to setup an MAA architecture for 11g GC.
    I have already done the following:
    - installed 11.2.0.1 RAC database
    - installed wls 10.3.2 on both nodes
    - installed OMS on one node
    - added the second OMS instance on the second node
    Now, in WLS console I can see that there are 3 servers created (1 Admin + 2 OMS servers).
    However, there is no cluster setup in WLS.
    I am also planning to use a load balancer before the OMS instances.
    Are there some notes on how to set this up? All I could find was stuff about 10g which is still based on iAS so that's not any use.
    Also, where can I find notes about how to setup load-balancer for an 11g OMS clustered?
    Regards,
    Pawel.

    Thanks !
    However, I have a problem on deciding how to create the shared filesystem for the loader... In your example there is the following statement:
    ■The second thing to consider is shared storage, for both the XML file loading, and the software library (used for patching and provisioning). So make sure you can add a good shared storage solution to the OMS machines when needed to handle the shared files
    What is the best way to do that?
    - OCFS2
    - GFS
    - NFS (I don't like this solution as it is not HA - if primary server goes down - so does the shared folder in all attached nodes)
    - ASMCF (installing a whole Grid Infrastructure with ASM sounds way too much overhead to accomplish a simple task of sharing a directory between to nodes)
    Currently we have FC interfaces installed on both machines and attached to a disk storage matrix. In other words we have the same device /dev/raw1 visible from both OMS nodes.
    Which approach is best keeping in mind we want High Availability maintaned?

  • 11G Grid control - Target is temporarily in status pending state.

    Hi,
    I'm using 11G OMS, where at a point of time I can see many unknown targets with message "Target is temporarily in status pending state."
    There are different databases running on different hosts are showing the same error.
    Thanks
    KSG

    KSG,
    Can you try below commands on agent to get status & upload/reload , last upload time & target being monitored
    Also have check in /etc/hosts of agent host should be in below format
    <IP> hostname.domainname hostname
    Check ping telnet for connectivity between agent & OMS
    HTTP Console Port : 7789
    HTTPS Console Port : 7800
    HTTP Upload Port : 4890
    HTTPS Upload Port : 4900
    Agent Port : 3872
    Repository Port : 1521
    Enterprise Manager Central Console Port = 4889
    Enterprise Manager Central Console Secure Port = 1159
    emctl status agent
    emctl upload
    emctl reload
    emctl config agent listtargets Thanks,
    Ajay More
    http://www.moreajays.com

Maybe you are looking for