11g Grid Control in a cluster?
Hi All,
I am trying to find some official doc on how to setup an MAA architecture for 11g GC.
I have already done the following:
- installed 11.2.0.1 RAC database
- installed wls 10.3.2 on both nodes
- installed OMS on one node
- added the second OMS instance on the second node
Now, in WLS console I can see that there are 3 servers created (1 Admin + 2 OMS servers).
However, there is no cluster setup in WLS.
I am also planning to use a load balancer before the OMS instances.
Are there some notes on how to set this up? All I could find was stuff about 10g which is still based on iAS so that's not any use.
Also, where can I find notes about how to setup load-balancer for an 11g OMS clustered?
Regards,
Pawel.
Thanks !
However, I have a problem on deciding how to create the shared filesystem for the loader... In your example there is the following statement:
■The second thing to consider is shared storage, for both the XML file loading, and the software library (used for patching and provisioning). So make sure you can add a good shared storage solution to the OMS machines when needed to handle the shared files
What is the best way to do that?
- OCFS2
- GFS
- NFS (I don't like this solution as it is not HA - if primary server goes down - so does the shared folder in all attached nodes)
- ASMCF (installing a whole Grid Infrastructure with ASM sounds way too much overhead to accomplish a simple task of sharing a directory between to nodes)
Currently we have FC interfaces installed on both machines and attached to a disk storage matrix. In other words we have the same device /dev/raw1 visible from both OMS nodes.
Which approach is best keeping in mind we want High Availability maintaned?
Similar Messages
-
OEM 11g grid control - Question
Dear DBA's,
I'm using 11g grid control, RDBMS - 11.2.0.2 on RHEL 5.0
My current setup : I have 4 node RAC database running on (node1, node2, node3, node4). My RMAN backup job in EM runs from node1.
Preferred setup : I need to modify this job or create a new one (whichever is feasible) so that my backup job runs from (node3 or node4) instead of node1.
Can you kindly suggest How can I modify the setup to meet my requirement?
ThanksI made these changes in the RMAN script (In OEM JOB Parameters) and still see backup running from node1.
I have recreated jobs (Changed ownership of these jobs from SYMAN to a different ID, which was also part of my task) and during Job creation, while adding targets (I chose target type as Database instance of node4 instead of Cluster database) This fulfilled my request. Thanks again for your reply. -
Oracle 11g grid control software for Oracle Enterprise Linux 5.0 version
Hi,
Just curious to know when Oracle 11g grid control software for Oracle Enterprise Linux 5.0 version will be released. If already released, can you post the link?
Regards,
Manoharaadragna wrote:
What is the best installlation document to follow for the latest EM Grid control ?The latest Grid Control is available for download at http://download.oracle.com (Scroll down to "Enterprise Management"). There is a README beside the download link. THAT README PROVIDES INSTALL INSTRUCTIONS.
In a nutshell, you install the lowest version (10.2.0.1 or 10.2.0.2, which ever is lower for your Grid Control platform), and then apply the 10.2.0.5 patch according to the readme. That should not normally take more than a day.
>
Also, can GRID discover PeopleSoft and Siebel application software ?
That can be found using the self-help portal: http://otn.oracle.com -> Products : Enterprise Management (left edge menu). In the 'Product Focus' area, you will notice 'Application Management' which will lead you to the appropriate data sheets and supporting information. -
11g Grid Control - Host Configuration Collection Problems
Hi Guys,
I just installed Oracle 11g Grid Control and it has been running for 2 weeks until I recently tried to walk through the parts of it.
My intention was to clear off all the error messages, critical warnings, alerts, and policy warnings.
When I arrived at the development summary box, on the home tab, I can see that there is 1 collection problem.
When I clicked it, I saw that apparently the problem is with the host where I installed the grid control.
Problem type: Warning during collection of Oracle Software
message: Unknown WLS Home Location or WLS Version in Middleware Home /u01/app/oracle/product/middleware
I tried clicking on the "Refresh Host" button, but it didn't solve the problem at all.
I have also tried to take a look at the targets.xml however it seems the configuration in there are already pointing to the correct path to the weblogic home.
Please let me know if anyone has a suggestion for this.
Searching from google doesn't really return anything closely matched to this.
Thanks,
AdhikaWhat is the intent/timeline for fixing this bug? On MOS, it appears to have a status of "Status 33 - Suspended, Req'd Info not Avail". We are encountering this bug also and I would glady provide information from our systems in order for the issue to be resolved.
Thanks.
PostScript: FWIW, Google yielded a blog referencing this error and Doc ID 1433113.1. I am unable to access that document (as was the blogger). Because of this, and another major caveat (our machines with this collection error do not have WLS installed on them), I'm thinking this probably needs to be an SR rather than a forum discussion.
Edited by: JeriF on Feb 4, 2013 12:00 PM -
11g Grid Control with Dataguard
Hi ,
I need to configure a 11g Grid Control with Dataguard for the repository, are there any documents that i can follow for configuring the dataguard
for the Grid Control 11g, I am interested as how i would be setting up the tns entry in the OMS , since i had to do the failover / switchover etc of OEM Grid Control application across the standby .
Kind regards
KrishHi,
Please follow the document provided below:
How to Configure the OMS Connect String when Repository is in a Dataguard setup (Doc ID 1328768.1)
Let me know, if you are looking for the same document.
Best Regards,
Venkat -
Hi all,
I have problem with Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0) for Linux x86-64 (64-bit) downloaded archives.
Actually with GridControl_11.1.0.1.0_Linux_x86-64_2of3.zip (1,589,671,704 bytes) (cksum - 535544209)
I successfully downloaded all archives but cksum for this file (...2of3...) is invalid.
Even it is invalid I tried to install. Installation starts ok, but it breaks after few moments.
RegardsHere is cksum from file that I downloaded 3966614633 and on download page is 535544209.
It's obvious that something is wrong!
Oracle personal should fix this issue.
Anyhow, there is another way... Download from different location. See this thread:
Re: Invalid Software Download from OTN for Grid Control 11g on Linux x86_64
Regards -
Disk 1 of Enterprise Manager 11g Grid Control not downloading correctly
Hello, I'm downloading Enterprise Manager 11g Grid Control.
The first disk, of three, does not download correctly:
GridControl_11.1.0.1.0_Linux_1of3.zip
On the web page, its size is listed to be around 1.3 GB.
However, when downloading, it thinks its actual file size is only around 643 MB.
So only that much gets downloaded.
But after downloading, this .zip file cannot be opened, it does not appear to a valid .zip file.
Please investigate and fix this.
Thanks
EugenePlease check from edelivery.oracle.com . You need to unzip all the zips under one dir.
-
Weblogic license required for 11g Grid Control?
Weblogic is a pre-requisite for installing 11g Grid Control.
if you do not have weblogic already, and your only requirement for it is to use for Grid Control, is a license for Weblogic required?
I have raised an SR on this - and have been told a license is required.
I'm staggered by this - the packs in Grid have always been licensable, but the very basic functionality has always been free - including the use of an 'infrastructure' database to house the repository.
I'm interested to hear other peoples' experiences and whether this is a 'known' fact.I've already asked Oracle sales staff about it, but I don't want to mislead you.
Could you remind them their restricted-use license?
Grid Control includes a restricted-use license for the Oracle Database and Oracle Application Server components required to deploy Grid Control. Refer to Section 1.3.3,
"Restricted-Use Licensing," for details on the restricted-use licenses
This is the URL of the document: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14860.pdf
I would be happy to hear from their answer.
Regards
Gokhan -
How to add new host to 11g grid control
I have install silently oem agent 11g in a solaris system. The installation was successful and agent is up and running.
But the thing is I can't add this client and its database in my OEM Grid Control interface. When I try to add the target it shows the bellow error
Information
You cannot add a host target from Enterprise Manager Grid Control.
To add a host target, install the Oracle Management Agent on the host computer you want to manage. When the Management Agent begins communicating with the Oracle Management Service, the Management Agent target and the Host target will appear in the list of targets.
My Question is how i can the target's agent can communicate with OMS agent? and How this target can be incorporated?Hi,
the host and agent targets should show up right after installation of the agent, if securing was successful. I assume the error happened somewhere there.
Can you please paste the output of following command:
$ORACLE_HOME/bin/emctl status agent
where ORACLE_HOME is set to your newly installed agent?
Also, please check if you see any errors in $ORACLE_HOME/sysman/log/emagent.log and emagent.trc about communication between the agent and your OMS.
Best regards,
Robert -
OEM 11g Grid Control installation for 10g R2 database
Hi ,
I am new with oracle enterprise manager grid control ,
I have 3 questions ,
1. My customer is using windows server 2008 with oracle 10g R2 database , can I install OEM 11g R2 to monitor all the 10g databases ?
2. I found only 32 bit installers for windows , where as they are using 64 bit OS , is it fine to install 32 bit OEM in a 64 bit OS ?
3. Do they require any separate license for OEM 11g , they have license for oracle 10g database ?
I will really appreciate if someone can help me with these details , thank you.1. My customer is using windows server 2008 with oracle 10g R2 database , can I install OEM 11g R2 to monitor all the 10g databases ?
Yes
2. I found only 32 bit installers for windows , where as they are using 64 bit OS , is it fine to install 32 bit OEM in a 64 bit OS ?
Yes
3. Do they require any separate license for OEM 11g , they have license for oracle 10g database ?
You don't need any license to use OEM 11g, however you do need licenses to use Management Packs
Checkout:
Oracle® Enterprise Manager Licensing Information
11g Release 1 (11.1)
http://download.oracle.com/docs/cd/E11857_01/license.111/e11987/toc.htm
Regards
Rob
http://oemgc.wordpress.com -
Oracle 11g Grid Control failure at database credentials
Hi ,
I have the environment like Windows 2008 64bit machine. I have installed oracle database in one machine and in second machine , installed weblogic server then trying to install Grid control but
I'm facing the issue when i give the database credentials , its throwing message like check that listener is up and running or not.
I have checked everything is working.
Error is : There was a problem connecting to the database on the host and port specified. Check to make sure the host is up or that the database listener is running on that host
i have verified in the forums . but nothing worked for me. Could any one please help me outIf you have not tested a sqlplus connection to the database as user sys from the host where you want to install Grid Control, then try it.
Ex:
sqlplus sys/<PASSWORD>@"(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=<HOSTNAME>)(PORT=<PORT#>)))(CONNECT_DATA=(SID=<SID>)))" as sysdba
where:
<PASSWORD>: the password of user sys as entered in the UI
<HOSTNAME>: the host name as entered in the UI
<PORT#>: the port number as entered in the UI
<SID>: the SID as entered in the UI
- Loc -
Time Based Corrective Action-11g Grid Control
I need a corrective action that is based on time. There are some databases that we take cold backup (we cannot convert to hot backup for reasons beyond our control). So the backup script
shuts down the database
mounts the database
backup the database
opens the database.
For some reason, if the backup fails the database is left in mount state. I was trying to get a corrective action that will kick off at the MOUNTED state and open the database, only if the time is after 8 AM in the morning. I do not want the corrective action kicking off when RMAN is running at night for backup.
I was trying out the PL/SQL code
DECLARE
local_date DATE;
BEGIN
SELECT SYSDATE INTO local_date FROM dual;
IF local_date > trunc(sysdate)+9/24 THEN
EXECUTE IMMEDIATE 'alter database open';
END IF;
END;
This script runs once reports as successful. It may or may not open the database depending on the time. Depending on the time it will leave the database in OPEN or MOUNTED state. It does not run again.
I needed it to run as follows:
The backup fails at 6 AM in the morning,
The script should keep checking the time and open the database only when it is 9 AM.
Is there a way to do that, or am I going about in in a wrong way.
Thanks in advance for your help,
RadhakGot it to work by correcting the code
-
11G Grid control - Target is temporarily in status pending state.
Hi,
I'm using 11G OMS, where at a point of time I can see many unknown targets with message "Target is temporarily in status pending state."
There are different databases running on different hosts are showing the same error.
Thanks
KSGKSG,
Can you try below commands on agent to get status & upload/reload , last upload time & target being monitored
Also have check in /etc/hosts of agent host should be in below format
<IP> hostname.domainname hostname
Check ping telnet for connectivity between agent & OMS
HTTP Console Port : 7789
HTTPS Console Port : 7800
HTTP Upload Port : 4890
HTTPS Upload Port : 4900
Agent Port : 3872
Repository Port : 1521
Enterprise Manager Central Console Port = 4889
Enterprise Manager Central Console Secure Port = 1159
emctl status agent
emctl upload
emctl reload
emctl config agent listtargets Thanks,
Ajay More
http://www.moreajays.com -
Hi All,
I've been trying to download that software from oracle website for the last 2 days but the zip #1 is always corrupted. I tried from various PC / O/S and always have the same issue.
Anyone know where to download it from another website?
Thanks
FelixFelix,
Are you referring to http://download.oracle.com/otn/linux/oem/1110/GridControl_11.1.0.1.0_Linux_1of3.zip file? If yes, I have downloaded/extracted the file with no issues (using IE7 and Firefox 3.6.17).
Size: 1.27 GB (1,371,325,446 bytes)
Size on disk: 1.28 GB (1,375,916,032 bytes)
Contains: 1,873 Files, 851 Folders
Thanks,
Hussein -
Need information on Installing oracle grid control on 11g R2
Hi,
i am new oracle grid control and its installaion.
I dont have any idea abt OMS and Agent.
following steps i have perfomed.
1) I have 1 DB on my machine.
2) download Grid software linux.x64_11gR2_grid.zip.
3) run the runinstaller.
4) while opening GUI of run installer there are 4 options.i have selected option no 4 - install grid software only.
Now please help me what is next step which i have to perform.How will I up My grid control .How will I register My DB in Grid.
I am using grid control because i have to configure EM plug in for Times Ten.
Regards,Hi,
If you want to use EM 11g Grid Control on 64-bit Linux, you should install version 11.1.0.1.0, which is available from here:
http://www.oracle.com/technetwork/oem/grid-control/downloads/linuxx8664soft-085949.html
Note that the latest version of EM is 12c; however, if you still want to go with EM 11g, the following Support note documents the installation steps and has references to other helpful notes:
Step by Step Installation of Enterprise Manager Grid Control 11.1.0.1 (Doc ID 1059516.1)
By the way, the Concepts guide below has information about the EM 11g components including the OMS and agent:
http://docs.oracle.com/cd/E11857_01/em.111/e11982/overview.htm#CEGBFJIC
Regards,
- Loc
Maybe you are looking for
-
Would someone be able to explain to me the following issue with Iphoto? I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same ca
-
XSLT Mapping :-- End to End Scenario
Can any one provide XSLT Mapping End to End scenario with screen shots?
-
I can't import some videos onto my mac...
iPhoto doesn't detect some videos on my sd card/sony hdr-cx220 HD camcorder and imovie has the ones that iphoto doesn't detect greyed out... I think it's the videos that were shot in 60p framerate because the ones before have imported easily...
-
How to load Transaction Data from BW to BPC
Hi, Can you please provide me step by step description forTransaction data load from BW infocube to BPC Application? Is there any PDF for the same? Regards, Ram Edited by: Ramchandra Laxmikant Puranik on May 18, 2011 3:23 PM Edited by: Ramchandra Lax
-
Can someone please help me, i'm really frustrated
i reacently bought an app from apple and i redeemed a $10 gift card but the still billed me for the cost of it. Can someone please help me, I'm really frustrated.