11g mediator enrichment, passing parameters between routing rules

Hi,
I am trying to make mediator enrichment work with a sync request / response service, One-way enrichment works perfectly in PS1.
So I have a few routing rules and try to use the response data of the previous routing in the next routing and end with a echo request.
For this I am trying to pass on variables between routing rules. but is seems that an assign and xslt variables. only live inside the routing rule.
I am trying the hack the mplan file to make this work but without any luck.
Is this possibe and how.
Thanks Edwin

Similar Messages

OBIEE 11G - Issue passing parameters between two reports

Hi folks,
I am struggling to pass parameters between two reports in OBIEE 11G.
My first report contains the following columns: Rolling Year Type (VCHAR), Year(VCHAR), Month(VCHAR), Cost(Double).
My second report contains the following columns: Rolling Year Type(VCHAR), Year(VCHAR), Month(VCHAR), Category(VCHAR), Cost(Double).
My requirement is to pass the Rolling Year Type, Year and Month values from report 1 to report 2.
On the Month column properties of report 1, I have created an Action Link called 'Drill to Category'. I have clicked on 'Navigate to BI Content' and selected Report 2.
Then on Report 2, I have included three filters: Rolling Year Type is prompted, Year is prompted, Month is promted.
When I run the report I always get the following error:
The specified criteria didn't result in any data. This is often caused by applying filters and/or selections that are too restrictive or that contain incorrect values. Please check your Analysis Filters and try again. The filters currently being applied are shown below.
When I check the cursor cache, the filter values are correct. Does anybody have any idea why Report 2 does not display?
When I remove the Month filter, the report works correctly.
I have since changed the third filter to be Month No and although Report 2 does display, it does not pick up the filter on the Month No.
I initially thought this may have been a caching issue and so I have disabled BI Server Cache but this does not fix my problem.
This was never an issue on OBIEE 10G as I found it very easy to navigate between two requests.
Has anyone else experienced problems with passing parameters between two request in 11G?
Any help appreciated.
Thanks
Gavin

Hi,
I once tried this kind of requirement(with dashboard prompts though) and hit at similar issue. I later found out that the problem is with the space in the parameter values. Can you please let me know, if the same is the case with you?
Suppose the parameter passed is "Jan 2010", but the report on the destination takes the value as "Jan" & "2010". Yes, it kind of split the parameter value to two based on space. I think we can notice the filters the destination report got, by enabling filter view.
In this case, since you pass only value at a time, could you try placing the parameter value anyway in double quotes? I think the Server then will understand it as one value.
Thank you,
Dhar

Passing parameters between views in different Web Dynpro applications

Hi everyone,
I would like to pass the value of one parameter between one view in a webdynpro application and another view that is in other webdynpro application. How can I do this in a secure way?

Hi,
Check below links for passing parameters between two applications:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b083f76a-708c-2b10-559b-e07c36dc5440
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/91b6ad90-0201-0010-efa3-9626d2685b6e
Re: Pass parameters via POST in WDPortalNavigation.navigateAbsolute method
Regards,
Anagha

Urgent! pass parameters between jsp pages

Does anyone can give an example about how to pass parameters between jsp pages?
This is what I do:
pageContext.forward("pag_loginc.jsp?p_idusr=" + strUsr + "&c_password=");
But when deployed is not working.
Help is needed.

can you put that stuff in the session context in the first page, then pull it out in the second page?

How to pass Parameters between two forms

im trying to do this but i could not find any way for this.
can any one help me how can i pass parameters between two forms
in forms4.5. any help will be appreciated
thanks.
null

Global variables can be used, but you can do what the online help
says ...
Parameters are passed to called forms by means of a parameter
list. A parameter list is a named programmatic construct that is
simply a list of parameter names (called keys) and their values.
You can pass parameter values to forms invoked by the built-in
subprograms CALL_FORM, OPEN_FORM, and NEW_FORM. In addition, you
can pass parameter values to other Oracle tools with the
RUN_PRODUCT procedure.
A parameter you include in a parameter list can be either a text
parameter or a data parameter. The parameter type determines how
its value is interpreted.
Text Parameters The value of a text parameter being passed to a
called product is a CHAR string that can represent the following:
n a user-defined form parameter defined in a form invoked
by the CALL_FORM, OPEN_FORM, or NEW_FORM built-in subprograms
n a command line or user-defined parameter for a product
invoked with the RUN_PRODUCT built-in subprogram
Data Parameters The value of a data parameter being passed to a
called product is always the name of a record group defined in
the current form. (A record group is a data structure that
stores records derived from a query or through programmatic
assignment.) Data parameters are used to pass data to products
invoked with the RUN_PRODUCT built-in subprogram. You cannot
pass data parameters to forms.
The following table shows the structure of a parameter list that
contains four parameters:
Key Paramtype Value
CITY Text_Parameter 'BOGOTA'
CATEGORY Text_Parameter 'EXPORTS'
MULTIPLIER Text_Parameter '.0275'
NEW_DATA Data_Parameter 'RECORD_GROUP8'
arun reddy (guest) wrote:
: im trying to do this but i could not find any way for this.
: can any one help me how can i pass parameters between two forms
: in forms4.5. any help will be appreciated
: thanks.
null

Trying to pass parameters between GUI classes and methods

Hi All.
I have been working on a rather large final year project in college and it is getting close to the deadline. It looks as though I need to "tidy up" my code as it contains too many static methods, variables and other bad programming habits. My package consists of many different GUI's and classes. Up until now I have been calling different GUI's with guiName.NameOfMethod. I have been told this is bad practice so I am trying to fix this. Also instead of passing parameters correctly I have been creating static variables in my main class and using them. So for example if one class needed to pass a variable to the other I would first myGlobalVariable = X; in the first class. And then the second class can use this. This is also bad, right?
So I guess im really just looking for a good example or tutorial on how to pass parameters between classes and methods, GUI if possible. Here is an example of how my GUI classes look:
public class anotherGUI extends JFrame implements ActionListener {
        private JTextField a, b, c;
        private JButton button1, button2;
        JPanel p, p1;
        public anotherGUI() {
            LayOutAnotherGUI();
            setLocationRelativeTo(DnDMain.pictureArray[a]);
            setTitle("Example");
            setVisible(true);
            pack();
        private void LayOutAnotherGUI(int c) {
     //GUI is layed out here
        public void actionPerformed(ActionEvent e) {
            Object source = e.getSource();
            if (source == submit)
                clickOK();
        public void clickOK(){
            //Here is where I have been accessing and modifying static global variables. (But this needs to change).
public void showanotherGUI() {
        new anotherGUI();
}This is more or less how I have been going about creating my GUI's. These are used as pop ups. The user enters a value and then it is closed.
To be honest I have been able to pass a variable correctly from one class to a GUI class but I have still having difficulty. For example in my code above I can pass the variable into this class but I cannot pass it into clickOK(). An this is where it is needed.
Can anyone please help?
I hope I have explained my problem well.
Thanks in advance.

I dont think that is what I need. An example of what I do in my program is:
I have a main GUI with an array of images. There are a number of other small GUI's that appear for certain functions when the user clicks on an image or does some other function. I am trying to pass a value into the GUI class that is used for the smaller "pop up" GUI. So lets say the user has clicked the image in array[12]. Then a GUI is displayed. I need to pass the integer 12 into this class.
Thanks.

How to pass parameters between main and sub vi during parallel execution using the VI server technique?

Hello All,
I am working with the following example (from previous postings on this
board) that demonstrates how to run a sub vi in parallel with the main
vi. I'd like to pass parameters between the main and sub such as
the control (delay) and indicator (value) parameters of my subvi
example. Does any one know how to do this? Parallel
execution is important for me, I cannot just paste the subvi icon into
my main diagram (two nested while loops...)
Many thanks,
Luis
Message Edited by cascao on 08-16-2005 08:42 PM
Message Edited by cascao on 08-16-2005 08:42 PM
Attachments:
VI_Server_technique.vi ‏32 KB
SubVI_1.vi ‏19 KB

cascao wrote:
Hello All,
I am working with the following example (from previous postings on this
board) that demonstrates how to run a sub vi in parallel with the main
vi. I'd like to pass parameters between the main and sub such as
the control (delay) and indicator (value) parameters of my subvi
example. Does any one know how to do this? Parallel
execution is important for me, I cannot just paste the subvi icon into
my main diagram (two nested while loops...)
Many thanks,
Luis
Luis, you can use the VI Server methods 'Set Control Value' and 'Get Control Value', as demonstrated in the attached examples.
-Franz
Attachments:
VI Server.zip ‏26 KB

How to pass parameters between two xterm windows?

Hi,
I would like to know how to pass parameters between two xterm windows where there are two independence processes running on them respectively ? Would appreciate if any one out there can advise me . Thanks.

Global variables can be used, but you can do what the online help
says ...
Parameters are passed to called forms by means of a parameter
list. A parameter list is a named programmatic construct that is
simply a list of parameter names (called keys) and their values.
You can pass parameter values to forms invoked by the built-in
subprograms CALL_FORM, OPEN_FORM, and NEW_FORM. In addition, you
can pass parameter values to other Oracle tools with the
RUN_PRODUCT procedure.
A parameter you include in a parameter list can be either a text
parameter or a data parameter. The parameter type determines how
its value is interpreted.
Text Parameters The value of a text parameter being passed to a
called product is a CHAR string that can represent the following:
n a user-defined form parameter defined in a form invoked
by the CALL_FORM, OPEN_FORM, or NEW_FORM built-in subprograms
n a command line or user-defined parameter for a product
invoked with the RUN_PRODUCT built-in subprogram
Data Parameters The value of a data parameter being passed to a
called product is always the name of a record group defined in
the current form. (A record group is a data structure that
stores records derived from a query or through programmatic
assignment.) Data parameters are used to pass data to products
invoked with the RUN_PRODUCT built-in subprogram. You cannot
pass data parameters to forms.
The following table shows the structure of a parameter list that
contains four parameters:
Key Paramtype Value
CITY Text_Parameter 'BOGOTA'
CATEGORY Text_Parameter 'EXPORTS'
MULTIPLIER Text_Parameter '.0275'
NEW_DATA Data_Parameter 'RECORD_GROUP8'
arun reddy (guest) wrote:
: im trying to do this but i could not find any way for this.
: can any one help me how can i pass parameters between two forms
: in forms4.5. any help will be appreciated
: thanks.
null

Problem in passing parameters between flow task in a dynamic region

Hi,
I have a problem with the passing of parameters between task flow when it is executed within a dynamic region. To implement this, I followed the Baranovskis Andrejus Blog "JDeveloper 11g and ADF Task Flow Parameters" and everything works perfect as the task flow are not invoked from a dynamic region. But if the same task flow are converted to fragment of pages and executed in a dynamic region, the filter in the task flow that is called does not work, it does not return any records.
Any idea that I may be missing to make this work well?.
Thanks in advance.

Hi Frank.
My case is the first, ie in a single dynamic region, a task flow call another passing parameters to filter data to display in the second, using a task flow call activitie. As I said in the message above, everything works well as both task flow to not become unbounded task flow with fragmet page.
Any ideas?
Thanks

Passing parameters between portlets with in the same page

Hello,
I have created a Form and a report. The form allows a user to make some selection values, and then upon submit it passes the selected values to the report to query the database. The results from the query are displayed in a new - seperate - window from the form. Is there anyway to disaply the report results on the same page as the form that called the report? I guess I am trying to have a page with 2 portlets (a form, and a report). I want the user to be able to make a selection from the form portlet and pass that selection to the report portlet within the same page.
Thanks,
McKell

Hi I received this info from an OSS named Mahantesh. I thought it was very helpful information for passing portlet parameters between a form and a report within the same page.
Please check these steps to pass parameter from form to report:
This article is based on demo tables EMP and DEPT.
1. Create a report RPT_DEPT using the query 'Select * from dept where deptno= :deptno'
2. Create a form FRM_EMP based on EMP table.
3. Edit the form FRM_EMP => 'Formatting and Validation Options' section => click on DEPTNO field
=> Give the value for the 'Link' (under 'Display options') as 'javascript:runrep()' where runrep is the name<br>
of javascript function that we are going to create later.
4. In 'Form text' section, in the 'Footer Text' add the code for the runrep function as follows.
<script>
function runrep()
var formObj = document.forms[0];
var deptno;
for (var i=0; i < formObj.length ; i++){
if (formObj.elements.name == 'FORM_EMP.DEFAULT.DEPTNO.01'){
//FORM_EMP is the form name
deptno = formObj.elements[i].value;
break;
var url="/portal/page?_pageid=38,1,38_31678:38_31787&_dad=portal&_schema=<br>
PORTAL&deptno=" + deptno;
//modify the url according to your environment.<br>
window.location=url;
}<br>
</script>
5. Modify the URL in the above code with your page url on which form and report portlets have been placed.
6. Goto Page properties => Parameters tab (Parameters and Events option should have been enabled at Pagegroup level).
7. Create a page parameter and map it with report portlet parameter.
8. Now run the page, enter deptno or query the form to get the deptno and click on the link next to deptno field. You should get report with corresponding deptno on the page.

Passing parameters between portlets (PL/SQL PDK)

I'm new to the PDK, so forgive me if this is a dumb question. I need to develop a portal page containing a single search portlet, and then many other associated portlets which bring back various bits of data based on the result of the search.
Is it possible to drive the content of other portlets on the same page by passing values from one to another and refreshing the whole page?
null

Neil,
You can definitely pass parameters from one portlet to another in PL/SQL and we actually have a sample that you can take a look at. In the PDK, download the Parameter passing and CSS Example Provider sample. http://technet.oracle.com/products/iportal/files/pdkjan/index.html
Click on PL/SQL
One of the portlets demonstrates how to pass parameters to one portlet or all portlets on a page.
Hope this helps,
Sue

Passing Parameters between 2 Portlets on 1 Page

Hi,
I'm new to this portlet stuff and I might miss something important, but:
I "just" want to send parameters from one form on one Page to a portlet on the same page...
PassAllParameters is already set to true...
I also have read the "Primer" and the "Adding Parameters and Events to Portlets", after giving up to do this my own, I just copied and pasted the Name/Age Form JSP (nearly... I've made Java out of it...) as my DataProvider Portlet and copied and pasted the "Generic Public Parameter Receiving Portlet" as my DataReceiver Portlet... the Event and Parameter Tags are NOT missing in the provider.xml... but even after pressing submit there are no parameters at all avaible for the "receiving Portlet"!!!
PLEASE can someone tell me what I am doing wrong?!?!?!?

Hi friends,
I worked with the application which is in
http://server:port/jpdk/providers/event. is working fine with passing parameters to another page.
Also I create my own application which is working fine if i have the 2 portlets in the same page.
But it is not working with portlets in different page. On clicking the link it is not going to the another page. Hereby i give the required codes.
portletpass.jsp:
PortletRenderRequest prr = (PortletRenderRequest) request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String eventSubmit = EventUtils.eventName("submit");
String eventParamsno = EventUtils.eventParameter("sno");
String strsno="50" ;
NameValuePair[] linkParams = new NameValuePair[2];
linkParams[0] = new NameValuePair(HttpPortletRendererUtil.portletParameter(request, eventSubmit), "");
linkParams[1] = new NameValuePair(HttpPortletRendererUtil.portletParameter(request, eventParamsno),strsno);
<a href="<%=PortletRendererUtil.constructLink(prr,
prr.getRenderContext().getEventURL(), linkParams, true, true)%>"><%= strtitle %>
</a>
provider.xml of portletpass.jsp:
<event class="oracle.portal.provider.v2.DefaultEventDefinition">
<name>submit</name>
<parameter class="oracle.portal.provider.v2.DefaultParameterDefinition">
<name>sno</name>
<displayName>sno</displayName>
</parameter>
</event>
portletreceive.jsp:
PortletRenderRequest prr = (PortletRenderRequest) request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
//      String snosp = "sno", snorec="" ;
//     String values = prr.getParameter("sno") -------returns null
     String values = prr.getParameter("_page_url");
     String snorec = values.substring(values.lastIndexOf("sno=")+4) ;
     out.println(snorec); // here i get the required value
provider.xml of portletreceive.jsp:
<inputParameter class="oracle.portal.provider.v2.DefaultParameterDefinition">
<name>sno</name>
<displayName>Input Parameter #1</displayName>
</inputParameter>
Also i did the necessary changes in parameters and events tab as well.
I cant sorted out what is the mistake i did.
The scenario i need is on clicking the link it should display the details in a new page.
Can anybody please help me.
Thanks in advance
Durai

Passing parameters between form portlets on two different pages ...

Here is a brief summary of our problem.
We have one master form and a detail form which are published as portlets and placed in two different pages.
Now i want to pass parameters from master form portlet resides on one page to detail form portlet resides on another page.
Say for example, when i invoke master form (created based on demo DEPT table), enter values on fields then invoke another page
on which the second form portlet (say form based on EMP demo table) resides. Now i want to pass deptno to second form and
get displayed in deptno field of second form.
I was looking at the following posting, but how to do this when forms are published as portlets and placed on two different pages ?
http://forums.oracle.com/forums/message.jsp?id=997683
Customer actually want to pass a parameter from master form to 5 detail form portlets resides on different pages.
This is bit urgent as it is the only problem stopping the customer go live.
Thanks in advance.

Please refer to post Re: session state security
It tells you how to populate a form portlet in a page by clicking on a link in a report portlet.
You can use the wwsto_api_session objects to store data submitted by the master and let the detail form pick it up and proceed with the query.

Passing parameters between portlets

Hi , I have a page with two portlets : one , done with the wizard , is a form , the other one is another form , but is done with a JSP.
My trouble is that with the second form , the one done with a JSP , I must insert into the database two values , one retrieved by the jsp itself , and the other one is a value of one field of the other form.
My question is how can I get , from my jsp , that value coming from the other portlet ???
Thanks
max

Hi,
You can redirect to another page and pass parameters to it. For this, you need to know the pageid to which you have to redirect. Assign form action to
http://machine:port/servlet/page
PageServlet requires few other parameters (form fields) to redirect the control to the required page.
You can get them by making a call to
HttpPortletRendererUtil.htmlFormHiddenFields(pr,PortletRendererUtil.PAGE_LINK)
This returns a string similar to the following.
<INPUT TYPE="hidden" name="_pageid" value="54" />
<INPUT TYPE="hidden" name="_dad" value="portal30" />
<INPUT TYPE="hidden" name="_schema" value="PORTAL30" />
Parse it for _pageid and change the value to the page you want to redirect. Print these contents inside your form. Once you submit the form, it'll redirect the control to the page you want with the parameters.
--Sriram

Passing parameters between SWF with loadMovieNum()

When calling one swf from another using
loadMovieNum("name.swf",0) is it
possible to pass parameters to the second SWF like it is done
in
HTML/JavaScript or using any other method?

I think it's not possible if you load into _level0, because
that replaces everything in the player. If you load into a higher
_level, it should be possible, but I guess you have to wait until
the movie is loaded before you can set variables. Use preloader
code or the MovieClipLoader class, and set the variables when
loading finished, e.g. _levelX.myVar = 42.
cheers,
blemmo

11g mediator enrichment, passing parameters between routing rules

Similar Messages

Maybe you are looking for