11g-Multiple subject area feature.

Hi,
I am new to 11g,In 11g we have anew feature like creating Analysis from multiple subject areas so,
1)Is there any limitation on this Multiple subject areas usage.
2)any configuration or settings needs to be done in RPD for querying related subject areas..
3)what is the limit of using this subject areas.. maximum from How many SA we can build a report..
any other limitation for this feature...
please share your thoughts.

Hi ,
Its possible to add/remove subject areas , while creating a analysis , in OBIEE 11.1.1.6 .
refer this link :
http://www.rittmanmead.com/2012/03/obiee-11g-security-week-subject-area-catalog-and-functional-area-security-2/
but , I'm not sure whether same is possible in 11.1.1.5 .
Thanks .

Similar Messages

  • Multiple Subject Area - OBIEE 11g

    Hi,
    I have to do cross-subject area operations in OBIEE 11g. Here is what I have found out:
    1. There is an option to use Union/Intersect operations which creates a Union query
    2. There is an option to use 'Add/Remove Subject Area' which can be used to combine Attributes/Facts across multiple Subject Areas.
    I am looking forward more details on second point above but unfortunately there isn't an official document by Oracle on it.
    As I understand, by using 'Add/Remove Subject Area', OBIEE does not create a UNION query but it combines the attributes as if they are used through same Subject Area. So, it is not a typical join as I dont see something like Subject Area 1.Key = Subject Area 2.Key in Query log which brings me to a question:
    Is it possible to use the option to combine attributes across Subject Area based off Multiple BMM in RPD? I think the answer is NO because I don't think there is a way for OBIEE to combine results sets from different BMM.
    Thoughts?

    I am afraid but I am not able to follow your suggestion. I will try to make it very simple:
    1. We create Subject Areas in RPD
    2. Each Subject Area will be based on BMM created in RPD. Now, you can have multiple Subject Areas which are again based on BMM itself.
    3. I can also create multiple BMM within RPD.
    Something like:
    BMM A, Subject Areas - 1A and 2A
    BMM B, Subject Areas - 1B and 2B
    From above, consider you have created two BMM's - A and B and within each BMM there are two Subject Areas. 1A and 2A in BMM A and 1B and 2B in BMM B.
    Now, when I logon to Answers, when I click on New->Analysis, I would see four Subject Areas - 1A, 2A, 1B and 2B. Suppose I select 1A. Now, when I try to use Add/Remove Subject areas option, I can only see 1B (because both of them are from same BMM - A). I won't see 2A and 2B.
    So, this brings me to conclusion that you cannot combine attributes from different BMM using 'Add/Remove Subject Areas'. You can however use UNION/INTERSECT to do the operation but Add/Remove Subject Areas is limited to be used when your Subject areas are connected in the same BMM.
    Is my understanding correct?

  • Report from multiple subject areas

    Hi,
    I need to create a report from multiple subject areas. I am not sure whether it;s possible in OBIEE answers.
    Is there any other tool from OBIEE suite where I can design it?
    Thanks

    Yes, i can see datatype and number of columns is same in both queries.
    i have challanges to copy message but Error message seems to general. Error says (near to FROM) and I checked there are three FROM in query and all seems to be ok
    Query is something like as below
    select SA1.col1 saw_0,
    SA1.col2 saw_1,
    SA2.col1 saw_2,
    SA2.col2 saw_3,
    FROM
    (select col1 saw_0, col2 saw_1 from "subject area1") SA1
    FULL OUTER JOIN
    (select col1 saw_0, col2 saw_1 from "subject area2") SA2
    ON SA1.col1 = SA2.col1
    I can't see any issue in the query...please comment.

  • Multiple Subject Areas

    Somewhat new so please forgive me if the question is simple (if it is, please point me in the right direction). I've looked through the documentation and this forum, but have not found what I'm looking for yet.
    I am trying to get a single worksheet to pull data from multiple subject areas (two or more fact tables). I would prefer to not join fact tables together, and so I have not created the joins between the folders (fact tables) because I thought the performance would generally be horrible. (example of functionality I'm looking for: I want to combine Sales and Inventory data on one worksheet).
    I have kind of tried complex folders, but I would prefer to have the tool generate the SQL if possible because it won't just be me creating reports, and if it's possible, I'd like to avoid coding the SQL myself every time I want to join subject areas.
    I also looked at Custom Folders, but my understanding is that they are used primarily to join 1 fact table with multiple dimensional tables, but not multiple fact tables (at least that was the example in the documentation).
    My current setup is a 2 tier environment, with just Disco Admin and Disco Desktop on top of 10g. We don't have AS yet so I can't test anything that way.
    I appreciate any comments in advance.
    Nate

    You should try both Complex folders as well as custom folders and see which gives you better performance. Discoverer SQL optimizations for example apply only on Complex folders and not on simple folders.
    If you define the joins between the two tables, you can still use items from them in your Discoverer report without having to create a complex folder on them.
    And finally, you can always create a view or materialized view and use that MV in your Discoverer query.
    thanks
    Abhinav
    Oracle Business Intelligence Product Management
    BI - http://www.oracle.com/bi
    BI - http://www.oracle.com/technology/bi
    Blog - http://blogs.oracle.com/
    BI Blog - http://oraclebi.blogspot.com/

  • Historical Reporting With Multiple Subject Areas

    Hi All,
    I am working on to decide the best way to create repository. I do have a requirement from my client that they need to see both Current and Historical Reporting via OBIEE. I am keeping Type 2 SCD. My model consists of about 30 fact tables - each of them represents a business process/event.
    Following are my options:
    1) One Subejct Area to keep current/historical reporting. Here the joins would be based on PK/FK relationships with Effective Start and Effective End dates. There is a flag in all tables to find the most updated record. Users can use the flag to find the most updated record or use Effective Start and Effective End dates to go point in time.
    2) Create two Subject Areas - Current and Historical reporting. Current one will include the flag logic to get the most updated record in RPD
    3) Create multiple Subject Areas for each Fact table and use Combining Multiple Subject Area approach to join Subject Areas. Additionally, create one Subject Area for Historical Reporting (that will have all the tables in one SA)
    I am thinking of going ahead with option 3) This will have Subject Areas for all logical facts (for Current reporting) and one Subject Area for Historical reporting.
    Is this a standard design? Any inputs?

    You should try both Complex folders as well as custom folders and see which gives you better performance. Discoverer SQL optimizations for example apply only on Complex folders and not on simple folders.
    If you define the joins between the two tables, you can still use items from them in your Discoverer report without having to create a complex folder on them.
    And finally, you can always create a view or materialized view and use that MV in your Discoverer query.
    thanks
    Abhinav
    Oracle Business Intelligence Product Management
    BI - http://www.oracle.com/bi
    BI - http://www.oracle.com/technology/bi
    Blog - http://blogs.oracle.com/
    BI Blog - http://oraclebi.blogspot.com/

  • Consistency check error 38011: Logical tables from multiple subject areas..

    I received multiple 38011 errors when performing a consistency check after merging repositories:
    For example:
    Logical tables from multiple subject areas associated, OHRP and Enterprise Warehouse
    (OHRP and Enterprise Warehouse refer to different business models)
    I'm really not sure what this means, and Metalink and Google aren't turning up anything.
    Thoughts?
    -John

    John,
    Does it say anything about Assertion Failure? Also, this is straight up from help regarding import (through file menu) "Use this option when the objects you import are unrelated to objects already in the repository such as when the business model and physical layer objects do not exist. If an object of the same name and type exists, the import process overwrites the existing object with the new object. When you import objects from one repository into another, the repository from which you are importing must be consistent."
    Sometimes Merge does bring unexpected (and unwanted results) - especially if there're presentation aliases, duplicate business models, or naming conflicts. If it's not too late, I suggest you use Import,rather than Merge, also, preferably starting with a new RPD file. This would enable you to bring items piece-by-piece and hopefully would allow you to isolate the problem.
    Also, depending on the size - it's sometimes preferable to just reproduce missing part(s). I hope this is helpful.
    Also, I forgot to say - the Import is deprecated and not supported. They suggest you use Project Extract and Merge. If Merge isn't working out for you and Import isn't an option - maybe you could try Project.
    Edited by: wildmight on Mar 9, 2009 7:58 AM

  • Dashboard Prompt to filter multiple Subject Areas (in a Combined Analysis)

    I have a Combined Analysis where I am combining multiple Subject Areas. I want to add this report to a dashboard to use a dashboard prompt to filter by the Year.
    The problem I have is because the 'Year' value in each subject area has a different Column Formula ("Close Date"."Calendar Year" and "- Custom Number/Integer (Custom Object 2)".INDEXED_NUM_0)) I'm unable to have a single 'Year' prompt filter both Column Formulas.
    I have it currently working by creating two dashboard prompts - one for each subject area - that each ask for the Year to filter by.
    Is there a way to have a single prompt for Year and somehow have that filter both subject area's 'Year' value?

    I have tried a bit with no luck.
    In the Dashboard Prompt on that 'Year' filter I set the Presentation Variable to 'FILTER_YEAR'.
    I then set the filter in the report to be Equal to a Presentation Variable with the Variable Expr set to 'FILTER_YEAR'.
    When I run the report and enter the filter year it doesn't bring back any data for that report.
    Anybody have experience using the Presentation Variables?
    Thanks

  • Multiple subject areas within publisher & drill downs

    Hi ,
    can we pull data from multiple subject areas within publisher and place the report on a dashboard and still do drill downs?
    Thanks in advance.

    Thanks for your reply,
    I could not see any provision to get data from multiple subject areas.
    In BI Answers we can get data from multiple subject Areas but we cannot do the drill down.
    If there is any way to get data from multiple subject areas and still do the drill down then plz increase my knowledge repository....!!!!!!!!!!!!!!!
    Thanks,

  • OBIEE 11g: Searching Subject Area for measure names in Answers

    Hello,
    I have installed OBIEE 11g SampleApp 825 and just exploring the provided set of dashboards.
    From the samples, I am performing following steps:
    - I selected Edit Dashboard (for 2.1 Simple Demo Dashboard)
    - For Column 2, in the Master Detail 1 Compound View, I did Edit Analysis
    - which took me into the Answers design interface with 4 tabs (Criteria, Results, Prompts, Adv).
    In the Criteria tab, there is the Subject Area pane on the left where it shows the Subject Area this Answers report is built on and a bunch of Folders like Time, Products, Base Facts etc.
    Beside the Subject Area pane, is the Selected Columns pane where you drop fields from the folders.
    This particular analysis (Product Line Analysis) has three columns: Revenue Analysis, Products Hierarchy and T05 Per Name Year.
    Now, I want to find the folder to which the Revenue Analysis measure belongs. So, I started expanding each node/folder in the Subject Area pane and visually searching for "Revenue Analysis"....cannot find it!
    How to determine which Subject Area folder a field on the Analysis belongs to? In Oracle Discoverer, only the Folders from which fields are selected are "enabled" so it's easy to navigate straight to that folder. Or again, in Discoverer, you can actually search for a particular field name and it will return all folders that have that field name pattern. While the Search feature on the top row is useful in finding which Analysis/Report match a string, it does not help in identifying relevant Subject Area Folder fields that match a pattern.
    Is something similar available in Answers/OBIEE 11g?
    Thanks,
    Manish
    Edited by: mhathi on Oct 21, 2010 8:53 AM

    Again answering part of my own question...It was staring me right in the eye and I couldn't see it:-)...When you have a column in the Selected Columns pane, it's source is right there above the field name. If there is no source folder listed, then it might mean it's a formula. For example in my case, the Products Hierarchy column has the word Product above it...that's the folder it belongs to.
    Good. But, the follow-on question still remains, how to search for folders containing a particular string, to find say all folders that have columns like %Margin%?
    Edited by: mhathi on Oct 21, 2010 9:27 AM

  • Add values across multiple subject areas

    Hello Everyone,
    This is a pressing issue i am facing at the moment. I am on OBIEE 11g latest version.
    This is the scenario at hand.
    There are several tables of which each connects to the same time dimension and a global customer dimension. There are several products such as deposits, loans, pawning, leases, etc.
    For the time being, i have created separate subject areas for each of these products. And each subject area has an INCOME column.
    The requirement is to get the total of all the income columns from all the subject areas so that that total can be used for other calculations.
    The most probable solution from my R&D seems to be trying to add several subject areas for querying purposes. (Add / Remove Subject Areas option)
    In the RPD, right clicked on the deposits subject area and clicked on the option "... star or snowflake schema". This created a copy of the subject area on the BMM and added it on to the presentation layer. Now in thr analysis, choosing deposits, i click on the Add / Remove Subject Areas. The option has the newly created copy of the subject area i already have.
    My requirement is to add deposits and loans and pawning and etc.... What am i doing wrong here?
    Also, is there any other method to approach the problem?

    Let me try to describe the model as best as possible.
    I am trying to calculate the profitability of each customer for two banks. These banks have deposits, loans, leases, etc. Each customer is identified by a global id. The global ID is a dimension table. Then there is a the time Dimension.
    Bank A has it's own deposits and Bank B does too. A customer can/cannot have accounts in Bank A/Bank B/or Both Bank A and B. Similarly a customer can have a lease in either or both of the banks and this continues for other products.
    Each Global ID is referenced to a Client ID. Each client ID can have several Internal Keys which are referenced to each account the customer might have.
    For bank A > deposits, i have a fact table which connects to the Dim Time and Dim Global customer table. there are other dimension tables which connect to the same fact.
    Similarly bank B > deposits has the same look and feel. Only thing is i connected the fact of bank b - deposits to the same Time and Global Customer table. So now there is a circular join. And this join gets really complicated when i add the fact tables of other categories such as leasing, pawning, etc. Since my goal is to calculate the total of profitability from each of these categories (deposits + loans + pawning +...), i tried to write a formula but i do get the error that "no fact exists"
    For the time being i have created individual connections for each product. For example, deposits will have its own global customer and time and be connected to that particular fact. Similarly, pawning will have its own global customer and time (created alias tables for each of them). So right now i have the profitability of each customer on different categories.
    What i want to do is get the total of profitability for an individual customer for all the product type the customer has, and use that for further specific formula calculations.

  • Querying against multiple subject areas

    We would like to write a query against two or more subject areas. Is that possible in OBI EE 10g? Looks like this is a feature available in Business Objects and our users are requesting it. Please suggest how it can be done.

    Hi Nico,
    You are correct, OBIEE 10g will let you use UNION statements in the complex SQL. In fact you can use "Combine with Similar Request" to drive a UNION, UNION ALL and MINUS statement from the Criteria tab without having to go to advanced settings.
    What we were trying to say above was that it doesn't let you JOIN two subject areas together. For example,
    SELECT SUBJECT_AREA1.COLUMN1, SUBJECT_AREA2.COLUMN2
    FROM SUBJECT_AREA1, SUBJECT_AREA2
    WHERE SUBJECT_AREA1.KEY = SUBJECT_AREA2.KEY
    The above just isn't possible.
    One thing you can do that sort of accomplishes it (but it behaves really kludgey) is use the union statement + null/0 place holders + group by statement. This is a pain though. For example:
    1) Your Logical SQL should be something like:
    SELECT SUBJECT_AREA1.COMMON_DIMENSION, SUBJECT_AREA1.MEASURE1, 0 MEASURE2
    FROM SUBJECT_AREA1
    UNION
    SELECT SUBJECT_AREA2.COMMON_DIMENSION, 0 MEASURE1, SUBJECT_AREA2.MEASURE2
    FROM SUBJECT_AREA2
    2) In the criteria tab, create new aggregate columns based on MEASURE1 and MEASURE2 grouped by COMMON_DIMENSION. For example:
    NEW_MEASURE1= SUM(MEASURE1 by COMMON_DIMENSION)
    NEW_MEASURE2=SUM(MEASURE2 by COMMON_DIMENSION)
    ***I think you have to reference the saw name and not the logical name at this point. Hence it may read something like: SUM(saw1 by saw0) and SUM(saw2 by saw0)
    3) Throw the COMMON_DIMENSION, NEW_MEASURE1, NEW_MEASURE2 into a pivot table and you're all set.
    Like I mentioned, it behaves very strangely and is a pain to implement, but it does display the expected results a join would.
    -Joe

  • Need Help to develop a Funnel Graph Report using Multiple Subject Areas.

    Hi Everybody,
    Did any body developed Funnel based graph report in Answers..
    Scenario: I need to develop a report which is based on 4 Facts(4 Subject Areas) Report is sectioned with 4 block one blovk with one Fact Metrics like this four blocks.
    If any idea on such scenario it will be huge benefit for me.
    Thanks in advance.
    Thanks,
    Govardhana

    Yes, i can see datatype and number of columns is same in both queries.
    i have challanges to copy message but Error message seems to general. Error says (near to FROM) and I checked there are three FROM in query and all seems to be ok
    Query is something like as below
    select SA1.col1 saw_0,
    SA1.col2 saw_1,
    SA2.col1 saw_2,
    SA2.col2 saw_3,
    FROM
    (select col1 saw_0, col2 saw_1 from "subject area1") SA1
    FULL OUTER JOIN
    (select col1 saw_0, col2 saw_1 from "subject area2") SA2
    ON SA1.col1 = SA2.col1
    I can't see any issue in the query...please comment.

  • Multiple subject area in one RPD

    Hi guys
    first of all sorry if i am asking stupid questions
    we just installed OBIEE 10G and now all of department will use obiee . we will have now more then 50 subjects areas .. my question is can we have all these subject areas in one rpd or they will have to be in their respective rpds.
    Thanks for reading it.
    Dev

    Hi Guys
    yahh i think we will do that will try to mereg subject area as much as we can .. but suppose we have 10 Business Area in one RPD and we got diff users for diff business area .. so is there is any way we can do so every user will only able to see their own subject areas not the other ones.
    Thanks for your help
    Dev

  • Firefox not showing multiple subject areas for OBIEE source

    Creating a new data set using the Oracle BI EE source. The dropdown list of subject areas won't drop down in Firefox, so I can't select any subject area other than the first one. It works properly in IE.
    Anybody else noticed this?
    OBIEE 11.1.1.6.9 with Firefox 18.0.2 or 21.0.

    You should try both Complex folders as well as custom folders and see which gives you better performance. Discoverer SQL optimizations for example apply only on Complex folders and not on simple folders.
    If you define the joins between the two tables, you can still use items from them in your Discoverer report without having to create a complex folder on them.
    And finally, you can always create a view or materialized view and use that MV in your Discoverer query.
    thanks
    Abhinav
    Oracle Business Intelligence Product Management
    BI - http://www.oracle.com/bi
    BI - http://www.oracle.com/technology/bi
    Blog - http://blogs.oracle.com/
    BI Blog - http://oraclebi.blogspot.com/

  • Grand total feeding from Multiple Subjects Area

    Hi,
    I have to create a report that displays Grand total = sum of values from one subject area + sum of values from another subject area. How do i achieve this.
    Thanks

    Create a prompt based on the report(incl criteria) from SA1, include the measure column in the prompt, the value of the measure is based on the 'contrain' of each column in the prompt and assign to Presentation variable.
    Call Presentation variable in the report which is from SA2.
    ex: Report 1 from SA1 is like: $amount by year, by prodcut,by org
    Report 2 from SA2 is like: $OrderAmount by year, by prodcutType,by org
    Report1 by Prompt: Year->constrain, PRoduct->Constrain, Org-Constrain, $Amount as PS Var 'amt'
    Report 2 as reqular report, try to call @{amt} in the report for addition.

Maybe you are looking for