11g OEM GC - Preferred Credentials

Hi all,
Having some problems with setting preferred credentials for an 11g database on 11g grid control. Both systems are Oracle Linux 5.6 one is x64 and the x86.
It excepts SYSTEM but not SYS and not the ORACLE user.
I have tested ssh from the OEM server to the DB server in question as the ORACLE user.
I have been able to connect via TNS from the OEM box to the DB box as SYSTEM but SYS does not work and errors as insufficient privileges.
I have started an SR with Oracle but yet to hear from them. Just wondered if anyone in the community has had problems.
Thanks to all!

Jamie Gadong wrote:
I'm afraid I have been through this and it actually make the problem worse. When I enable a password file, which I did not have in place, it completely locks out the sys user.
I am yet to hear back from the SR I started. I will let you know what the outcome is from this.
Edited by: Jamie Gadong on Jul 19, 2011 2:50 AMHi,
I agree with Frank.
First connect to the database from the database as user SYS, using:
sqlplus / as sysdbaThen using another shell, create a password file for the database.
Make sure you use the same password for this password file as the SYS user has, or change the password of SYS afterwards.
HTH
FJFranken

Similar Messages

Prefered Credentials error in OEM

The "Logon as a batch job" as been set against USERX who is also part of
the ORA_DBA group. Also, USERX was the one who performed the installation
of Oracle 9iR2. When I set my "Prefered Credentials" I am using a specific
unique one for a individual DB. My values are as folows:
username: USERX
password: PASSWORD
confirm password: PASSWORD
role: SYSDBA (I even tried NORMAL).
When I save these settings and I try and run basically any data management
for backup management, I always get the following error:
"The wizard can not be launched because the prefered credentials for node ABC are either not set or invalid. "
What's going on?!?!?!?

Raman,
In the OEM you can have databases and nodes. The databases credentials expect the username/password created in database - the one you would've used when you log in using sqlplus. the node credentials require the os username/password - the one you would've used when you log into your server.
Check figure 1.15 at
http://download-east.oracle.com/docs/html/A96670_01/ch_conso.htm#7136
I suspect the "userx" is the OS account. You should enter username/password for the target_name "ABC", target type - "Node"
The database username/password/role you should enter for the target_name "Your database name" , target type - "Database"
Mike

My Oracle Support Preferred Credentials in Grid Conrol 11g

Can anybody tell me how Grid authenticates for the preferred credentials in Grid Control 11g.
In the patching setup screen, I've sucessfully connected to updates.oracle.com and get the message
https://updates.oracle.com was tested successfully using the Proxy.
I now get the message
My Oracle Support Credentials Not Set - You have not set the My Oracle Support credentials. Click the left link and supply the missing credentials.
and when I try to follow the link and input my MOS credentials, it times out with a message
'Networking error: Unable to connect to My Oracle Support'
thanks

Click on top right: Preferences ->Preferred Credentials
On the lower section titled "My Oracle Support Preferred Credentials", click on: Set Credentials
:p

Unable to set Host Preferred Credentials in OEM

Hi Experts,
I installed Oracle 10g R2 on on windows machine (XP Professional SP2).
Everything is OK except I can't set Host Preferred Credentials.
I logged in Windows using Windows Domain account, connected EM DB console as sysdba.
I used domain user name to set Host Credentials and get the error:
Connection to "mysystemname" as user xxxx failed: ERROR: Wrong password for user
I also added the user to "Log on as a batch job" under Local policies.
Then I set oracle as Host Credential, still get the same error.
Please help me how should I set the Host Credentials for Oracle 10g on Windows?
Thanks in advance

The keyword here is domain user, so not local user.
Normally Oracle runs using a local account, and you need that local account to connect.
You can try to make sure the domain account is a member of the local ora_dba group.
If that doesn't work, you probably need to start the Oracle service using a domain administrator account.
Sybrand Bakker
Senior Oracle DBA

Host preferred credentials suddenly not working

Windows 11GR2 on Windows 2008 64 bit
For some reason I am getting failures in dbconsole, I double check all my host credentials etc., part of dba groups, part of log on as a batch job etc. are all ok.
Everything was working fine.
Now I try to clone this database (or do anything involving jobs) to a test database on same server and I get errors. I go to database preferred credentials and enter in domain\username / password and get errors, one will say "Connection to servername.domain as user domain\user failed. Next time I will get an error saying internal error check logfile - WHICH LOGFILE?
Everything was working fine until recently, then just stopped. Oracles solution is to drop and recreate entire repository, but I can't take the downtime to put database in quiesce mode.
<rant>Oracle, do us a favor, +please put fully functional 9i version of OEM back as an option!+ There is nothing I dislike more that spending HOURS AND HOURS trying to debug a bloody TOOL that's supposed to make "database administration" so easy! I spend far more time working on this piece of crap user interface than I do on the database.. </end rant>
I feel better (almost)

Looked at the various log and trc files, nothing that I can see helps me. Also, in my OP I forgot to mention that in the services screen it shows neither databases dbconsole service as running, yet I can open dbconsole for either of them, and everything works except submitting jobs.
emca status dbconsole command show this:
C:\$orascripts>emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
https://winms-oradb1.millsite.net:5500/em/console/aboutApplication
EM Daemon is not running.

[Solved] Unable to set preferred credentials

(Windows 2003, SP2 for all computers ... locked down by local administrators) Grid Control Rel 2 with patches (but not up to R3).
I created a test userid, made it part of the local administration group, added it to the 4 required privileges "log on as batch", "replace process level token", "act as part of OS", and "adjust memory quotas". When I attempt to set te preferred credentials, I get the error
"Connection to cepaoas63.COE.ADS as user test failed."
That's all. No reason is given, as indicated by some of the other similar queries.
Questions:
- Any other privs normally required (and possibly normally given to administrators)?
- Any other policy setting your can think of that might defeat this?
- Any firewall stuff that might have an effect?
Message was edited by:
Hans Forbrich
Patch 4703814

From emoms trace file:
2007-05-02 15:14:48,921 [EMUI_15_14_44_/console/pref/setCredentials$targetType=host] ERROR creds.SetPrefCreds testCreds.1298 - SetPrefCreds.testCreds(): CredsException: Connection to gdntlnx1.guident.com as user oracle failed.
2007-05-02 15:15:10,796 [EMUI_15_15_06_/console/pref/setCredentials$targetType=host] ERROR creds.SetPrefCreds testCreds.1298 - SetPrefCreds.testCreds(): CredsException: Connection to gdntlnx1.guident.com as user oracle failed.
2007-05-02 15:15:29,171 [EMUI_15_15_27_/console/pref/setCredentials$targetType=host] ERROR creds.SetPrefCreds testCreds.1298 - SetPrefCreds.testCreds(): CredsException: Connection to oraclebi.guident.com as user oracle failed.
[EMUI_15_38_07_/console/monitoring/hostOverview$ctxType=Hosts$type=host$target=gdntlnx1.guident.com] ERROR host.HostOverviewDataObject getLogonInfo.2340 - IOException in sending Request :: Connection refused: connect
oracle.sysman.emSDK.emd.comm.CommException: IOException in sending Request :: Connection refused: connect
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:1726)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1622)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1545)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:913)
     at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getLogonInfo(HostOverviewDataObject.java:2282)
     at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getHostInfo(HostOverviewDataObject.java:2223)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.cabo.ui.data.provider.MethodDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.TableDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.CachingDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.DataProviderStack.getDataObject(Unknown Source)
     at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.DataBoundValue.getValue(Unknown Source)
     at oracle.cabo.ui.BaseUINode.getAttributeValueImpl(Unknown Source)
     at oracle.cabo.ui.BaseUINode.getAttributeValue(Unknown Source)
     at oracle.cabo.ui.laf.base.TextRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.DataScopeRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.BodyRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.servlet.ui.UINodePageRenderer.renderPage(Unknown Source)
     at oracle.cabo.servlet.AbstractPageBroker.renderPage(Unknown Source)
     at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
     at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:377)
     at oracle.sysman.eml.app.Console.doGet(Console.java:318)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:88)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:336)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
2007-05-02 15:38:38,234 [EMUI_15_38_33_/console/monitoring/hostOverview$selTab=0$target=gdntlnx1.guident.com$type=host] ERROR host.HostOverviewDataObject getLogonInfo.2340 - IOException in sending Request :: Connection refused: connect
oracle.sysman.emSDK.emd.comm.CommException: IOException in sending Request :: Connection refused: connect
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:1726)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1622)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1545)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:913)
     at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getLogonInfo(HostOverviewDataObject.java:2282)
     at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getHostInfo(HostOverviewDataObject.java:2223)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.cabo.ui.data.provider.MethodDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.TableDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.CachingDataProvider.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.provider.DataProviderStack.getDataObject(Unknown Source)
     at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.LogicalNodeRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.RootRenderingContext.getDataObject(Unknown Source)
     at oracle.cabo.ui.data.DataBoundValue.getValue(Unknown Source)
     at oracle.cabo.ui.BaseUINode.getAttributeValueImpl(Unknown Source)
     at oracle.cabo.ui.BaseUINode.getAttributeValue(Unknown Source)
     at oracle.cabo.ui.laf.base.TextRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.DataScopeRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.BodyRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderIndexedChild(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.renderContent(Unknown Source)
     at oracle.cabo.ui.BaseRenderer.render(Unknown Source)
     at oracle.cabo.ui.laf.base.xhtml.DocumentRenderer.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.ui.BaseUINode.render(Unknown Source)
     at oracle.cabo.servlet.ui.UINodePageRenderer.renderPage(Unknown Source)
     at oracle.cabo.servlet.AbstractPageBroker.renderPage(Unknown Source)
     at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
     at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:377)
     at oracle.sysman.eml.app.Console.doGet(Console.java:318)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:88)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:336)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
OEM Grid Control Version is: 10.2.0.2
Windows Version is: Windows XP Professional Version 2002 SP2
I had no issues with installing this version 10.2.0.2. My remote agents are uploading information back to OEM and I can see this information in OEM. I just cannot set the host preferred credentials which means I cannot take advantage of the maintenance features like scheduling a backup.
I originally tried to install 10.2.0.2 and upgrade to 10.2.0.3 but the OEM wasn't working after I did the uprade. So I did a fresh install on another server and just stayed at 10.2.0.2. I don't have a requirement to be at any particular version.

How to schedule a job of target host from OEM grid without credentials

Hi,
We are trying to schedule a backup from OEM to one of the target database.
To do this OEM requires host credentials. Is there anyway that we can do this without providing any host credentials? (because we dont have server username password)
We dont have host username password, what we have is sudo access to the user.
Thanks,

You have not given your OEM version or platform but this is very possible from 10.2.0.5 and up. Check the documentation (http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e14586/security3.htm#sthref336) or My Oracle Support site for details as there are a few hoops to jump through as a prerequisite.

Steps to generate AWR report from Oracle 11g OEM

I have gone through online documentation for generating an AWR report from Oracle 11g OEM but the documentation is more focused on generating the AWR report manually. I would request if there is a link or documentation to go through for generating AWR report from Oracle 11g enterprise manager.
I hope my question is clear.
Please revert with the reply to my query.
Regards

HI ,
Please check following link: Siva Oracle: How to generate AWR Report from OEM Grid
Thank you

Preferred Credentials, Vista Ultimate, Oracle 10.2.0.3

I do have an Oracle Db Rel 11.1 running on Notebook with Vista Ultimate (ok ok i know ;-)
Everything is working without problems
Now i installed Oracle 10.2.0.3 for Vista in a different home on the same notebook - Installation finished without errors - dbconsole running and i can enter Oracle Enterprise manager but
when i try to set preferred credentials for this db to log on to the host i always get the answer that the connect to system failed using the given credentials - the account i use for connect to host is the same as i use in my 11.1 db. account and password are correct. And after this failed check i recieve a message from Microsoft system the Oracle Enterprise executable has been stopped due an error.
Same problem i do have when i try to create a job and give host account.
the used host account does have the right *log on as batch job
Any Ideas?? Thanks

HI..
If it might help [http://amansharma.wordpress.com/2008/03/15/remote-operation-exception-in-em-its-workaround/]
Anand

How to find server model from 11g OEM mgmt$ views

How to find server model from 11g OEM mgmt$ views
server model like Dell 710, DL380 G7 etc..,

It is included in this query (run as user SYSMAN):
SELECT t.target_name AS host_name,
ecm_util.HOST_HOME_LIST (t.target_name, t.target_type) AS home_info,
hw.vendor_name AS Vendor,
hw.system_config AS System_Config,
hw.machine_architecture Architecture,
os.name AS os_name,
os.base_version os_base_version,
os.update_level os_update_level,
os.address_length_in_bits os_address_length_in_bits
FROM mgmt_targets t, mgmt_ecm_snapshot s, mgmt_hc_os_summary os, MGMT_HC_HARDWARE_MASTER hw
WHERE t.target_type = 'host'
AND t.target_name = s.target_name
AND s.snapshot_type = 'host_configuration'
AND s.target_type = 'host'
AND s.is_current = 'Y'
AND s.snapshot_guid = os.snapshot_guid
AND hw.snapshot_guid = s.snapshot_guid
ORDER by t.target_type
The asked info is available in the view MGMT_HC_HARDWARE_MASTER, column: SYSTEM_CONFIG
Eric

11G OEM new features

Hi,
I wanted to know the new features of 11G OEM new features. Any pointer is also welcome.
Regards,
Parto

Oracle Enterprise Manager Releases are separate to that of Oracle Database releases. Hope the below link will answer ur queries
http://blogs.oracle.com/oem/2009/03/oracle_enterprise_manager_10gr_1.html
http://www.dba-oracle.com/t_11g_oem_few_features.htm

Changing Preferred credentials on Solaris

I have GC 10.2.0.2 on a Solaris-64 box, monitoring databases on a 2-node Solaris-64 cluster (running Enterprise End 10.2.0.3).
I have a number of jobs that run scripts on the RAC from Grid Control.
I changed the UNIX password for the oracle account, and then changed the GC preferred credentials for each node in the cluster, clicked on the test button, and all looked OK.
But when my jobs run, they fail to connect to the RAC (invalid username/password).
When I changed the UNIX password back, they ran OK.
I've also tried deleting and re-creating the jobs, but still get the problem.
I can't figure out where it gets the old password from, or what else I need to change to get the new password accepted
In all cases I am using Preferred Credentials..
Any advice would be gratefully received!.
Bob

I restarted the agents on both RAC nodes, but no luck I'm afraid. Same problem.

OMS Preferred Credentials

Hi
I made a new management server and repository (9.2.0.4 + patchset 9.2.0.8) installation on a SLES9 (32Bit) sytem, and all is working well
The only problem is, that i cannot store the preferred credentials to the system with Enterprise Manager Console. I can enter the login-data to the form and when i try store the settings they get lost - they never get stored to the database.
There is no error message or something else ... notification settings and other administrator preferences are ok, but not the preferred credentials.
What can i do to fix this ?
I don't find any hints to solve the problem in the docs or in internet...
best regards, andi

You should be able to store the preferred credentials. You have specified at the beginning of your thread you are using a unix like platform, and you should be able to store them either on windows or on unix like environments. You only have to declare them at the preferred credential section.
Could you please post the specific error text displayed when you attempt to store the credentials?
~ Madrid
http://hrivera99.blogspot.com/

Active Directory plugin: Preferred credentials not recognized

I have installed the Active Directory Plugin 2.0.2.1.0 in my Grid Control (10) and I am getting the following error:
Version 2.0.2.1.0
Description Microsoft Active Directory monitoring including reports
Deployment Requirements: Requires network access and credentials of the host where Microsoft 'Active Directory' is installed and running
I set the preferred credentials for the agent. They are a user/password for someone that has "installation" and "admistration" privileges on the Active Directory server.
Is there a specific format the userid and password should be entered? (i.e. cn=xxxx)

If entering username only is having an error, enter the username as DOMAIN_NAME\username. Where domain_name is the domain of the AD host

Oracle 10g EM DB console Host Preferred Credentials for Windows

Hello:
I install Oracle 10g R2 on on windows machine (XP Professional SP2).
Everything is OK except I can't set Host Preferred Credentials.
I logged in Windows using Windows Domain account, connected EM DB console as sysdba.
I used domain user name to set Host Credentials and get the error:
Connection to xxxx as user Domain\user failed: IOException in sending Request :: Connection refused: connect
I created a loal user oracle, added it to ORA_DBA group, add it to "Act as part of the operating system" and "Log on as a batch job" under Local policies.
Then I set oracle as Host Credential, still get the same error.
Can any one tell me how should I set the Host Credentials for Oracle 10g on Windows?
Thanks for any help.

Thank you, mnazim:
Here is the message from emagent.trc:
2007-03-05 11:36:55 Thread-3928 WARN http: snmehl_connect: connect failed to (xxx-xxx.xx.xxxxxxx.com:3938): No connection could be made because the target machine actively refused it.
(error = 10061)
2007-03-05 11:39:00 Thread-3872 ERROR http: 1760: snmehl_read: error on read: An existing connection was forcibly closed by the remote host.
(error = 10061)
2007-03-19 16:47:48 Thread-3588 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =-240,and testTZoffset for America/New_York:-300 do not match
2007-03-19 16:47:49 Thread-3588 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =-240,and testTZoffset for America/New_York:-300 do not match
If it is the new DST that cause it, how can I solve it?
I just download Oracle 10g for test, and I don't have access to metalink. Is there any place else that I can get the Patches? or is there any other way to solve it?
Thanks again.

11g OEM GC - Preferred Credentials

Similar Messages

Maybe you are looking for