11g OID Configuration in High Availability Mode on OEL5.6 64 Bit

Hi Could you please provide me with some good document to install and configure 11g OID (Oracle Internet Directory) Configuration in High Availability Mode on OEL5.6 64 Bit.
Regards
Mohammed Riyaz Ahmed

Hi,
You get OID 11g as part of OFM 11g. Refer here for docs on high availability:
http://docs.oracle.com/cd/E21764_01/install.1111/e12002/overview.htm#CJAJEDFC
For other OID docs:
http://www.oracle.com/technetwork/documentation/oid-089101.html
I hope this helps.
regards,
GP

Similar Messages

Configuring two 11g OID servers in High Availability mode.

I have OID1 server where I have installed OID11g and WLS using SSL Port 3131 and Non SSL Port 3060. The ldap set up is working as the sqlnet connections are using ldap adapter to resolve the request.
I have OID2 server where I have installed OID11g using the same port.
Now, I want to setup a cluster for these two so that the the load balancer will automatically route the requests to either of the two servers so that if one is unavailable, the other will fill the request. I am following "Configuring High Availability for Identity Management Components" document, but it is not very what steps needs to be followed.
Any suggestion will be appreciated;
I am also having problem using ldapbind or any of the oid commands as it gives "unable to locate message file: ldap<language>.msb" despite the fact that I am seting all the env vars such as ORACLE_HOME, ORACLE_INTANCE, ORA_NLS33 and so on.

You don't need to setup a cluster for Load balancer. The Load balancer configuration can point to both the server and depending on the configuration in LBR act in failover and load balanced mode. All you need to take care of is that the two OID servers are using the same schema.
When installing first OID server it gives a option to install in cluster mode and when installing the second server you can use the option to expand the cluster created in first installation. But that should not stop you from configuring OID in highly available mode using Load balancer as explained above.
"unable to locate message file: ldap<language>.msb" occurs if you have not set the ORACLE_HOME variable. See that it is set to <MiddlewareHome>/Oracle_IDM1 if you have used the defaults.
Hope this helps,
Sagar

Identity management 11g in High Availability Mode.

Hi All,
Can any one please give me some pointers on how to configure Identity management 11g in High Availability Mode. If possible please provide some document links for reference.
Currectly I am looking into below Oracle Ducument.
http://download.oracle.com/docs/cd/E15523_01/core.1111/e12035/directorytier_im.htm#BACIEEBD
This document completely configuring the High Avaialability case when we have Oracle Data Base in RAC mode. Please correct me if i am wrong.
But I just wanted to know how can we configure the high availability mode without Oracle DataBase in RAC mode.
Do we need to configure the DataBase in high Availability Mode also?
Thanks in Advance.
Siva Pokuri.

Below resources should be of some help to you:
http://www.oracle.com/technology/products/ias/hi_av/F5v9LBR.pdf
http://www.oracle.com/technology/products/ias/hi_av/904_Distributed_IM.pdf
http://www.oracle.com/technology/products/ias/hi_av/904_rack_mounted_im.pdf
http://www.oracle.com/technology/products/ias/hi_av/904_cfc_im.pdf
http://www.oracle.com/technology/products/ias/hi_av/OracleASInfraHAArchs.pdf

2xC350 in High Availability Mode (Cluster Mode)

Hello all,
first of all, i`m a newbie in ironport. So Sorry for my basic questions, but i can`t find anything in the manuals.
I want to configure the two boxes in High Availability Mode (Cluster Mode) but i don`t understand the ironport cluster architecture.
1) in machine mode i can configure IP-Adresses -> OK
2) in Clustermode i can configure listeners and bind them to a IP-Address -> OK
But how works the HA?
A) Should i configure on both boxes the same IP to use one MX Record? And if one box is down the other takes over?
B) Or should i configure different IPs and configure two MX Records?
And if one box is down the second MX will be used.
Thanks in advance
Michael

The ironport clustering is for policy distribution only - not for smtp load mgmt.
A) Should i configure on both boxes the same IP to use one MX Record? And if one box is down the other takes over?
Could do - using NAT'ing on the f/w but few large business take this approach today.
Many/most large businesses use a HW loadbalancer like an F5, Foundry ServerIron, etc. The appliances themselves would be set up on seperate IP addresses. Depending on the implementation requirements, the internal IP address could be a public IP or a private IP.
B) Or should i configure different IPs and configure two MX Records?
And if one box is down the second MX will be used.
If you set up two boxes, even with a different MX preference, mail will be delivered to both MX records. There are broken SMTP implementations that get the priority backwards, and many spammers will intentionally attempt to exploit less-restrictive accept rules on secondary MX recievers and will send to them first.

FIM installation in High Availability Mode

Experts,
I am planning to install FIM in high availability mode.
FIM Portal on four servers
FIM Service on four servers and
FIM Portal on four servers.
Any document that can guide me for this.
Thanks,
Mann

See these
Preinstallation and Topology Configuration
FIM 2010 high availability
I also recommend this FIM book by David & Brad
FIM R2 Best Practices Volume 1: Introduction, Architecture And Installation Of Forefront Identity Manager 2010 R2

Cisco ISE in High Availability mode

Hello
Need some help, I have hardware cisco ISE 3315, want to go for high availability now, my question is that;
1. Is Cisco ISE available on Hyper V ?
2. Is it possible to configure 1 hardware , and other virtual (VMware / HyperV {If available}) in high availability mode ?
Thank you very much.

While ISE may run in Hyper-V, it will definitely not be supported so I recommend staying away from doing that. The only supported virtual environment is VMware. If you only have Hyper-V then you will have to get another appliance. Do keep in mind that the 3315s are EOL/EOS. The replacement models for those are the 3415.
As it was already stated above Charles and Karsten, you can mix virtual and physical appliances. So if you do en up going with a supported virtual solution make sure that the resources for the ISE nodes are dedicated/reserved and that thin provisioning is also NOT supported.
Hope this helps!
Thank you for rating helpful posts!

Can IPS 4345 work in High Availability mode?

Hi all,
Can IPS 4345 work in High Availability mode?
Or can it have a bypass unit? Kindly help. Is there any alternative to this model in Sourcefire?
Regds,
Ram

Hi,
Cisco 4300 series IPS supports High-availability mode.
you can run it in active-active mode and also in active-standby mode.
Regards,
Rahul Chhabra
Network Engineer
Spooster IT Services

Datagurd configuring in high protection mode

Hi gurus,
I am forllowing, the following method to configure dataguard in oracle 11g r2 on oel 5.5
startup;
archive log list;Database is in archive log.
select name from v$datafile;all datafiles, redolog files, controlfile are in /u01/app/oracle/sales directory
alter database force logging;
alter database add standby logfile '/u01/app/oracle/sales/stdredo01.log' size 50m;
alter database add standby logfile '/u01/app/oracle/sales/stdredo02.log' size 50m;
alter database add standby logfile '/u01/app/oracle/sales/stdredo03.log' size 50m;
alter database add standby logfile '/u01/app/oracle/sales/stdredo04.log' size 50m;
create pfile from spfile;
shut immediate;
startup mount;
alter database create standby controlfile as '/u01/app/oracle/sales/stdcon.ctl';
shut immediate;
exitoracle]$mkdir stdsales
oracle]$mkdir -p admin/stdsales/adump
oracle]$mkdir -p flash_recovery_area/stdsales
oracle]$mkdir -p flash_recovery_area/STDSALES
oracle]$mkdir -p arch stdarch
oracle]$cd sales
oracle]$cp *.* /u01/app/oracle/stdsales
dbs]$vi initsales.ora
*.log_archive_dest_1='location=/u01/app/oracle/arch'
*.log_archive_dest_2='service=stdsales lgwr sync affirm'
*.standby_file_management=auto
*.log_archive_dest_state_1=enable
*.log_archive_dest_state_2=enable
*.db_unique_name=sales
*.fal_server=sales
*.fal_client=stdsales
oracle]$cp initsales.ora initstdsales.ora
oracle]$vi initstdsales.ora
*.log_archive_dest_1='location=/u01/app/oracle/stdarch'
*.log_archive_dest_2='service=sales lgwr sync affirm'
*.standby_file_management=auto
*.log_archive_dest_state_1=enable
*.log_archive_dest_state_2=enable
*.db_unique_name=stdsales
*.fal_server=sales
*.fal_client=stdsales
*.db_file_name_convert='/u01/app/oracle/sales/','/u01/app/oracle/stdsales/'
*.log_file_name_convert='/u01/app/oracle/sales/','/u01/app/oracle/stdsales/'
oracle]$cp orapwsales orapwstdsales
netservice name is created for sales and stdsales databases.
standby side:
startup nomount;
alter database mount standby database;
alter database recover managed standby database;Primary side:
startup mount;
alter database set standby database protected;
alter database open;end of the communication error
so many times configured but not successed. i don't know where i am doing wrong.
can you please help to configure database in high protection mode.
thank you!

$vi initsales.ora
*.log_archive_dest_1='location=/u01/app/oracle/arch'
*.log_archive_dest_2='service=stdsales lgwr sync affirm'There is a problem in your log_archive_dest_1 and log_archive_dest_2 parameters.
log_archive_dest_1='location=/u01/app/oracle/arch
valid_for=(all_logfiles,all_roles)
db_unique_name=<db-unique-name of primary db>
log_archive_dest_2='service=stdsales
valid_for=(online_logfiles,primary_role)
db_unique_name=<db-unique-name of standby>
You can refer this http://docs.oracle.com/cd/B19306_01/server.102/b14239/create_ps.htm
Also
standby side:
startup nomount;
alter database mount standby database;
alter database recover managed standby database;The command should be "*alter database recover managed standby database disconnect from session*" on standby side for the archivelogs to be applied on the standby database from the primary DB and not "alter database recover managed standby database".

OSSO in High Availability Mode

Hi All,
Can anyone please tell me how to configure the OSSO 10.1.4.3 in High Availability & FailOver cases?
Thanks in Advance.
Siva Pokuri.

Read the docs http://download.oracle.com/docs/cd/B28196_01/idmanage.1014/b15988/advconfg.htm#i1011679

How to configure cisco 3650-24ts-s switch in high availability mode

Hi, I bought 2 nos 3650-24ts-s switch with accessories. i have created 10 vlans & given internal access in one switch. Now I need to configure another switch as standby or HA mode so if any thing goes wrong in first switch, second one will take automatic. Pl help to provide me step by step guide for doing the same.thnaks

Depending on license you could have access to setup HSRP between them. Since they aren't stacked switches I would also do a port channel.

How to configure high availability and disaster recovery? And user authenticate

We are in the process of rolling out our online help which was created using Robohelp. In our initial rollout we will provide access to the files via our Client Portal which requires authentication. We are also planning for our next version where we intend to implement Robohelp server functionality.
Our IT team is looking at options on how to configure for High Availability and Disaster Recovery. It seems that Robohelp doesn't have any built-in functionality in this area. In addition we require that our users authenticate. The options for the server version seem to be more internally focused and we would need to solution the authentication using a third party.
Would anyone be willing to share their approach in these areas? Would you be willing to participate in a conference call with our IT Professionals?

Hello again
I see my good friend Peter replied to your LInkedIn post where you cross-posted the same question. For those here that have no clue what Peter stated, here it is:
What are you seeking to recover? Your projects? Your outputs? This sounds like a question more appropriate to Disaster Recovery consultants and far wider reaching than RoboHelp. To me it seems like a question your IT people should be asking direct to such consultants who would expect a fee for their advice.
I would agree with Peter's reply.
I'll also go further and ask what exactly is being done in this realm for the application? Help files generally are there to support an application on the server. So whatever you are doing for the applciation should also be able to be used for the WebHelp, FlashHelp or web based AIR Help files, no?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

URL to be used in high availability for Directory Server

Hi All,
I have an environment configured for high availability. I have two OVD and OID servers each in this environment, configured in high availability. What should be the value in the Server URL field of the Directory Server IT Resource in the OIM for this environment? In the normal environment, I had it as "ldap://ovdhost01:6501" and it was working fine. But since there are two servers here, I am not sure what URL to use in place of this. The entry for the two ovd hosts in the OHS is "idstore.com" which is configured on 6501 port. But I tried using the following URLs and none of them worked:
1. idstore.com
2. ldap://idstore.com
3. ldap://idstore.com:6501
4. ldap://ovdhost01:6501,ldap://ovdhost01:6501
Can someone help me know the correct URL to be used in this case?
Thanks,
$id

Not sure about OVD or OID but for SOA and OIM:
SOA:
XMLConfig -> XMLConfig.SOAConfig -> SOAConfig
Rmiurl -> t3://soahost1:soaport1,soahost2:soaport2
Soapurl -> Load balancer or web server url (without the /workflow context)
OIM:
XMLConfig -> XMLConfig.DiscoveryConfig -> Discovery
OimFrontEndUrl -> Load balance or web server url (without the /oim context)
And ofcourse on your LB or WebServer, you need to configure these:
SOA: http://docs.oracle.com/cd/E23943_01/core.1111/e10106/ha_soa.htm#CHDDJEGD
OIM: http://docs.oracle.com/cd/E21764_01/core.1111/e10106/imha.htm#BGBDFEIE
-Bikash

File Adapter vs BPEL interaction issue on high availability environment

Hi all,
i would really appreciate your help on a matter i'm facing about a composite (SCA) deployed on a clustered environment configured for high availability. To help you better understand the issue i briefly describe what my composite does. Composite's instances are started by means of an Inbound File Adapter which periodically polls a directory in order to check if any file with a well defined naming convention is available. The adapter is not meant to read the file content but only its properties. Furthermore, the adapter automatically makes a backup copy of the file and doesn't delete the file. Properties read by the adapter are provided to a BPEL process which obtains them using the various "jca.file.xyz" properties (configurable in any BPEL receive activity) and stores them in some of its process variables. How the BPEL process uses these properties is irrilevant to the issue i'd like to pose to your attention.
The just described interaction between the File Adapter and the BPEL process has always worked in other non-HA environments. The problem i'm facing is that this interaction stops to work when i deploy the composite in a clustered environment configured for high availability: the File Adapter succeeds to read the file but no BPEL process instance gets started and the composite instance gets stuck (that is, it keeps always running until you don't manually abort it!).
Interesting to say, if I put a Mediator between the File Adapter and the BPEL, the Mediator instance gets started, that is the file's properties read by the adapter are passed to the mediator, but then the composite gets stuck again 'cos even the mediator doesn't seem to be able to initiate the BPEL process instance.
I think the problem lies in the way i configured either the SOA infrastructure for HA or the File Adapter or BPEL process in my composite. To configure the adapter, i followed the instructions given here:
http://docs.oracle.com/cd/E14571_01/integration.1111/e10231/adptr_file.htm#BABCBIAH
but maybe i missed something. Instead, i didn't find anything about BPEL configuration for HA with SOA Suite 11g (all the material i found refers to SOA Suite 10g).
I've also read in some posts that for using the db as a coordinator between the file adapters deployed on the different nodes of the cluster, the db must be a RAC! Is that true or is possible to use even another type of oracle db?
Please, let me know if someone of you has already encountered (and solved :)) a problem like this!
Thanks in advance,
Bye!

Hi,
thanks for your prompt reply. Anyway, i had already read through out that documentation and tried all settings suggested in it without any luck! I'm thinking the problem could be related to the Oracle DB used in the clustered environment, which is not RAC while all documentation i read about high availability configuration always refers to a RAC db. Anyone knows if a RAC Oracle DB is strictly needed for file adapter configuration in HA cluster?
Thanks, bye!
Fabio

NAC High Availability: Users getting disconnected during failover

Hi,
We have a pair of CAS in in-band virtual-gateway mode in high availability mode.
We are still running some tests but we have noticed that the clients are losing connectivity during the failover.
* The service ip is always active (never stops responding pings).
* The stand-by CAS becomes active immediatly after we shut down the primary, we see it on the CAM.
* The client however looses connectivity with the internal network for almost two minutes.
I'm guessing this isn't normal, but would like to know what is the expected behaviour on this.
Thanks and regards,

We configured another pair today and we are noticing the same behaviour, however it seems random... sometimes the user barely looses connection, other times it will take from 2-5 minutes for it to come back.
We are only using eth2 for the failover link since we only have one serial port.
When we test we make sure both servers are up and then we reboot the primary. The secondary becomes active immediately. When both are up again we repeat the process.
any other ideas? something we should check?
Thanks!

Cisco Unified Presence 8.5 High Availability problem

As we have two Cisco presence version 8.5 node as subcluster and configure as High Availability in a Subcluster . Once i click enable HA on the
presence server . its give the below messages as meniton
Primary server :
node state : Running in backup mode
node reason : peer down during initialization
Seconary server :
node state : unknown
node reason : High Availability not enabled.
Even All the service are up and running.
So please advice hightly appreciate for you response.

Hi,
Are both the CUP servers in different subnets/networks? If yes, then there is a setting under cluster topology page that has to be modified. It must be in Settings under cluster topology page. The default parameter will be 'MDNS'. This has to be changed to 'Router to Router' if the servers are in different subnets.
-Sankar
Sent from Cisco Technical Support iPad App

11g OID Configuration in High Availability Mode on OEL5.6 64 Bit

Similar Messages

Maybe you are looking for