11g on Novell Netware 6.5

I have a question.
Can an Oracle 11g DB be installed on a Novell Netware 6.5?

Can an Oracle 11g DB be installed on a Novell Netware 6.5? No.
You are (almost) 10 years too late:
From MOS/metalink:
ALL Oracle Products on Novell NetWare [ID 120207.1]
ALL Oracle products on Novell NetWare will be desupported 31-DEC- 2001

Similar Messages

Installing Oracle 8i Enterprise Edition on Novell Netware Platform

Where can I get documentation and a copy of the Oracle 8i CD packs for installing on a Novell Netware platform?
Thanks

You probably have to navigate to inside the INSTALL folder. Sometimes the SETUP.EXEs on the root of the CD won't launch. Should be something like INSTALL\WIN32\setup.exe

Connection error Novell Netware 4.11

Nowadays I've changed the operating system from 10.3 to 10.4. But unfortunatelly I can't connect a Novell Netware 4.11 server. The server is seen in the server list, but if I try to connect, tzhere is an error messages: "This file server uses an incompatible version of the AFP protocol. You cannot connect to it."
Is the Novell 4.11 supported in Tiger?

The problem is that OSX.4.x lost the file transfer ability of Appletalk... 10.1.5 thru 10.3.9 had it!
http://docs.info.apple.com/article.html?artnum=301183
So, if you can't change Appletalk on the Server end to TCP/IP... ?

Oracle Database at Novel Netware and D2K at Windows Machine

One of our clients are asking Combination of Oracle Database at Novel netware and Developer 2000 at Windows machine , please send us the comments whether the above combination is possible

Hello,
yes it is possible, we are having oracle 8.04 running on Netware 5.0 with Win98 clients using D2K.
However further versions of oracle e.g. 8i,9i etc are not available and never going to be available on netware.
hence we are migratiing to Win2K Adv server.
regards.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
One of our clients are asking Combination of Oracle Database at Novel netware and Developer 2000 at Windows machine , please send us the comments whether the above combination is possible<HR></BLOCKQUOTE>
null

Fun experience with Novell Netware server install.

I had no clue where this belonged, since there's not a Netware Forum here...so here it is.
I just had an opportunity for a job interview today and the company uses Novell Netware, so I thought I'd install the server and network my computers with the Novell Client to refresh my memory on things. What a pain in the arse...
First of all I already had 3 OS's installed on my machine and since Netware installs in DOS, I had to figure out what I wanted to do...so I deleted Redhat 9 which I just installed, and in the process I deleted my extended partition which lost two logical drives which (my bad) I hadn't backed up yet...(No great loss...although there was some stuff there I wanted to keep I can recover it.) OK...what the heck...I figure...so I move all my partitions to the top of the drive to make room at the front to install DOS 6.22 and Netware, but alas it screwed up my Windows 2003 server (as noted in the MS forum). OK...nothing on there I critically need...so it gets nixed too! Now tons of free space and only Win98 which I don't want to delete because there is stuff on there I want to keep and backup first. (BTW - I'm using System Commander for partitioning and OS stuff).
OK...install...DOS 6.22..no probs...install CD-ROM drivers...no prob...Go to install Netware via DOS and gosh! It only recognizes 14 mb RAM available and needs 96. I have 128! What's up with that? I tried that a dozen different ways, still no joy. OK...so, maybe I should have tried my old instructor's suggestion first...Use Win98's Dos to install...OK...did it...Cool -- no more RAM issue, but I get to the Network card driver part of the install and what happens? The install proggy keeps assigning an "invalid interupt" to my Realtek Network card.
Now I have to go to my interview...that went well (I think - one can never be sure until you get the job offer)...
Come back and it's raining...that means I can't go play in my garden...that's OK though--got a thousand things to do on my computers.
In the meanwhile I bounce my idea off my old instructor to "force" the IRQ in POST -- so I changed PCI slot1 to IRQ 3 and PCI slot 2 to IRQ 5 (both were set to "auto" - I wasn't sure which slot I had my card in and didn't want to open my computer and change it so I just picked 'em both). Cool...blasted right through that part of the install. Ooops...now SYS volume won't load. Why? I don't know...I think I forgot to create the partition. So, we go back to System Commander, and get us a new partition for netware and run install again.
Now this part I couldn't figure out...made it through to the network card part and I can't believe it...it autorecognized a Kensington driver when I know for sure I have a Realtek network card. I ain't complaining...it worked...SYS volume loaded and I have a running Novell server.
Now let's see how many issues I can create trying to install the client on another Win 98 machine I need to use to type a thank you letter for the interview and get it printed! *lol
In case you missed it, there's no problem in the above post to try to help me figure out. I just thought some might enjoy the story.
It's amazing what one forgets, that he thinks he remembers...or forgot that he should have remembered...or something like that!
Self Cert Mortgage
cheap diamond rings canada

venela wrote:
> since there's not a Netware Forum
> here...so here it is.
You have posted a bunch of questions that are support related into the
developer forums.
Please go here instead:
http://forums.novell.com/novell-prod...orums/netware/
Tommy Mikkelsen
IT Quality A/S, Denmark
Novell Support Forums SYSOP
Sorry, but no support through email
Be a GroupWiseR, go http://www.groupwiser.net

Can mac os x lion connect to novell netware 5.0?

Hello - I recently deployed several new imac workstations (mac os x lion). Unable to connect to Novell Netware 5.0 servers via afp connections. Found link for
http://www.novell.com/communities/node/13155/afp-changes-osx-lion. Instructions did not help my situation. Has anyone been able to do this? Thanks

No, I do not know why.
I installed a new copy of Lion via USB Flash Installer. I have no iead about how to fix this problem.

Will Xsan connect to Novell Netware from Mac?

Will Xsan connecto Novell Netware? I recently was able to connect to Novell using Snow Leopard and since upgrading to Lion can no longer connect to the Novell.
Need to be able to get this working and have tried different methods but not successful.
Please help.

Xsan is just a filesystem. It doesn't connect to Novell. I take it you are having problems binding a Lion client to a Novell directory server, correct? If so, that's a problem between Novell and the Mac's Open Directory client.

Connecting OS X Server to Novell NetWare 6.5 eDirectory as a proxy

Have anyone tested to connect OS X Server to eDirectory as a "proxy"??
Macosxlabs.org had a WebCast in 2004 (#17) expalining integration with eDiretory and somewhere during the cast Dan Sinema from Apple mentioned this aproach of connecting to eDirectory and letting Workgroup Manager add/edit all OS X specific entries to directory. I this case you should not need to manually extend schema for Novell, but Workgroup Manager would do that for you.
I haven't tested this solution but I wonder if there is any practical experiance concerning this issue?
In my case I would like to connect OS X Server (Tiger, 10.4.8 UB or later) to Novell NetWare 6.5 eDirectory and have Novell take care of PC clients and OS X Server of macs as if it was standalone Master OD. The only thing taht I would like to sync is usernames and their passwords.
so if you have any ideas or practical expereance please share
MacBook Pro / PowerMac G5, xServe G5... Mac OS X (10.4.8)

Ataubman,
> in fact you'd be better off making that machine SLES
> and using it to host Win2008 and NW - MS do support Win2008 servers as
> guests under XEN on SLES
Or VMWare ESXi if your hardware is capable.
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Novell Netware 4.11 on Microsoft Virtual Pc 2004

Hello,
I have Novell Netware 4.11 SP9 running in a Microsoft Virtual PC 2004.
I can not get the network card to detect or work. This looks to be the
closest support group in the list that might have an answer.
The Virtual PC creates virtual hardware for the Intel / Dec 21140 network
card.
I know poeple have got 4.11 SP8a to work in VPC 2004 but I can't seem to
get it to work. Intel suggest I need:
NBI.NLM v2.25 9/17/98
MSM.NLM v3.95 5/12/99
ETHERTSM.NLM v3.8 3/1/99
Which I now have. I have tried numerous Intel and even some old Dec lan
drivers. Here is an example of the error.
LOAD SYS:SYSTEM\DC21X4.LAN SLOT=3 TX_THRESHOLD=4 RX_BUFFERS=5
FRAME=ethernet_802.3 NAME=DC21X4_1_E83
Loading module DC21X4.LAN
Digital DC21X4 Ethernet PCI driver v2.03 (960209)
Version 2.03 9 February 1996
(C) Copyright 1994,95,96 Digital Equipment Corp. All Rights Reserved.
DC21X4-NW-050: No PCI board found in machine!
SERVER-4.11-1553: Module initialization failed.
Module DC21X4.LAN NOT loaded
Any Ideas ?
(I have loaded the nbi, msm and ethertsm files manually but still do not
get card detection)
Thanks

I know nothing about VirtualPC and you will find many people here who know
more about VMWare which I could recommend.
Based upon my VMWare experience, make sure the NIC is configured Private/Host
Only or NAT.
It must be configured to appear directly connected to your LAN.
[email protected] wrote:
> Hello,
>
> I have Novell Netware 4.11 SP9 running in a Microsoft Virtual PC 2004.
> I can not get the network card to detect or work. This looks to be the
> closest support group in the list that might have an answer.
>
> The Virtual PC creates virtual hardware for the Intel / Dec 21140 network
> card.
>
> I know poeple have got 4.11 SP8a to work in VPC 2004 but I can't seem to
> get it to work. Intel suggest I need:
>
> NBI.NLM v2.25 9/17/98
> MSM.NLM v3.95 5/12/99
> ETHERTSM.NLM v3.8 3/1/99
>
> Which I now have. I have tried numerous Intel and even some old Dec lan
> drivers. Here is an example of the error.
>
> LOAD SYS:SYSTEM\DC21X4.LAN SLOT=3 TX_THRESHOLD=4 RX_BUFFERS=5
> FRAME=ethernet_802.3 NAME=DC21X4_1_E83
> Loading module DC21X4.LAN
> Digital DC21X4 Ethernet PCI driver v2.03 (960209)
> Version 2.03 9 February 1996
> (C) Copyright 1994,95,96 Digital Equipment Corp. All Rights Reserved.
> DC21X4-NW-050: No PCI board found in machine!
> SERVER-4.11-1553: Module initialization failed.
>
> Module DC21X4.LAN NOT loaded
>
> Any Ideas ?
>
> (I have loaded the nbi, msm and ethertsm files manually but still do not
> get card detection)
>
> Thanks
Craig Wilson
CNE3, 4, 5 - MCSE - CCNA
NSC Sysop (http://support.novell.com/forums/)
Tech Writer - http://www.ithowto.com
(I Peter 4:10)

Toshiba NB200 ZENworks 7 Novell Netware

Machine Specifications
Toshiba NB200
Realtek RTL8101E / 8102E(L) / 8103E(L) PCI-E Ethernet Controller v1.13 (081016)
Novell / Zenworks Software
Currently using ZENworks 7 Suite and the following imaging driver update (August 2009:
NOVELL: Downloads - ZENworks Imaging Driver Update for August 2009
Problem / Fault
Imaging up (to server) or down (to workstation) is very slow.
Error message received when trying to do an image.
Could not find the ZENworks Repository.
Activating manual setup program.
Anthony Hill
ICT Support Officer
[email protected]

i said that i was trying to modify the bootcd.iso. where would i find those directions?
>>> dmundric<[email protected]> 10/2/2009 12:06 PM >>>
File is located in SYS:TFTP\CMDS directory. If you are trying to mod
the bootcd.iso, that is another matter entirely.
Keith Larson;1865438 Wrote:
> there is no such file inside the bootcd.iso directory structure.
>
>
> >>> dmundric<[email protected]> 10/1/2009 12:16 PM >>>
>
> Hi Keith:
>
> Actually, the change is made to the z_maint.cmd if you are using
> Maintenance Mode and z_auto.cmd if you are using Automatic mode. As
> Anthony points out, just add that newid line to the end of either (or
> both) file with no carriage return. No need to restart ZFD or the
> server, the changes are hot.
>
> Keith Larson;1865326 Wrote:
> > I need to try this with the bootcd.iso I tried putting the same
> changes
> > into isolinux.cfg, but it didn't work for me.
> >
> >
> > >>> anthonywhill<[email protected]> 9/29/2009
> 6:36
> > PM >>>
> >
> > Hi there,
> >
> > I spoke to a lady at Novell and she was able to help with this
> > problem.
> > If you want to talk direct to myself I can give you the information
> > you
> > need.
> >
> > We are using PXE and we did the following:
> >
> > In the following directory there are a couple of CMD files:
> > \\fsbackup1\SYS\tftp\cmds
> >
> > You need to edit:
> > z_maint.cmd
> > z_auto.cmd
> >
> > With the following extra lines:
> > newid="0x10ec 0x8136,r8169" acpi=off modprobe fan modprobe thermal
> > This goes straight after the existing line/s of text, no carraige
> > return.
> >
> > If you need any more info, for example a boot CD settings please let
> > me
> > know.
> >
> > My e-mail at work is:
> > [email protected]
> >
> >
> > --
> > anthonywhill
> >
> ------------------------------------------------------------------------
> > anthonywhill's Profile: 'NOVELL FORUMS - View Profile: anthonywhill'
> > ('NOVELL FORUMS - View Profile: anthonywhill'
> (http://forums.novell.com/member.php?userid=23050))
> > View this thread: 'Toshiba NB200 ZENworks 7 Novell Netware - NOVELL
> > FORUMS' ('Toshiba NB200 ZENworks 7 Novell Netware - NOVELL FORUMS'
> (http://forums.novell.com/showthread.php?t=384124))
>
>
> --
> dmundric
> ------------------------------------------------------------------------
> dmundric's Profile: 'NOVELL FORUMS - View Profile: dmundric'
> (http://forums.novell.com/member.php?userid=10991)
> View this thread: 'Toshiba NB200 ZENworks 7 Novell Netware - NOVELL
> FORUMS' (http://forums.novell.com/showthread.php?t=384124)
dmundric
dmundric's Profile: http://forums.novell.com/member.php?userid=10991
View this thread: http://forums.novell.com/showthread.php?t=384124

Mac Pro and Novell Netware

Can Mac Pro connect to a Novell Netware server/LAN?

Naz,
There shouldn't be any issues connecting with the Mac Pro. How are you connecting today? Is your LAN on IP or IPX? What version of NetWare are your running? Are you connecting via NFA or an actual Novell Client in OSX? If it is via NFA then there is no change from how you do it today. As you know there are new 3rd party clients like the one from ProSoft.
http://www.prosofteng.com/support/netwarexip.php?faq=237
Hope that helps.

Using Novell Netware

Does anyone know how to use the novell netware with java?
esp. read out all connected users and send messages to them

Novell has 'LDAP Classes for Java' that may be of interest to you.
http://developer.novell.com/ndk/ldap-index.htm
With them you can authenticate to the NDS server and retrieve user information via LDAP. However, I don't know if this will contain a list of users that are currently logged into Novell.

Install Novell Netware 6.5

I downloaded NW65OSSP7.iso
Im in Windows platform.
Please some one explain me how to install Novell Netware in to a fresh machine.

Originally Posted by ncham
I downloaded NW65OSSP7.iso
Im in Windows platform.
Please some one explain me how to install Novell Netware in to a fresh machine.
As elagrew says you can not simply install NetWare within Windows (a la Ubuntu's Wubi).
If you are running some form of virtualisation software (VMware Workstation/Player/Server or VirtualBox) on your Windows machine then you could install a NetWare server as a virtual machine.
Whether a physical (wiping existing hard disk content) or virtual install you do not have all the pieces you need - NetWare 6.5 is a 2 CD set and you are missing the second (Products) CD. If you have a DVD drive then you can save yourself some disk swapping by using an Overlay DVD that contains both OS & Product CDs combined.
You also note that you download NW65OSSP7.iso - this denotes NetWare 6.5 SP7 whereas SP8 is the latest (and final) release. SP8 is available for download from NOVELL: Downloads - NetWare 6.5 SP8 e Media Kit
Also, as elagrew notes, Novell have moved from NetWare to Open Enterprise Server which is a Linux-based alternative that installs on top of SUSE Linux Enterprise Server. Latest version of that is OES2 SP3 (on SLES10 SP3) and it can be downloaded from NOVELL: Downloads - Novell Open Enterprise Server 2 SP3
HTH.

Novell Netware Local Synch Issue

When a user of mine attempts to synch their local DreamWeaver CS6 site from a Novell Netware shared folder, the process seems to behave properly but upon subsequently attempting to manually delete/replace those same files on the Netware share, they are presented with the following Novell error:
"Folder Access Denied
You need permission to perform this action.
You require permission from S-1-1-0 to make changes to this folder."
We have proven that these same files/folders operate normally for her at their location UNTIL DreamWeaver's synchronization is introduced into the equation. Once DreamWeaver has acted on them, they produce the error. Apparently something involved in DreamWeaver's transfer/lock is causing these permission issues. Any insight/advice would be greatly appreciated.

Gonzalezjohnj,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Novell Netware 6.5 monitoring

Hi everybody! I know about that there is a possibility to monitor Novell Netware 6.5 servers by Nagios.....
Could someone tell me.....Can i do it by SCOM somelike....?

Currently, Novell netware 6.5 is not on supported list of SNMP network device which you can download the list from
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=26831
This means that you should create your own snmp discovery for Novell netware 6.5 snmp and correspsonding monitor OID value. The following link may be helpful for you to discover the OID value of Novell netware server monitoring using SNMP.
http://support.ipmonitor.com/mibs/NETWARE-SERVER-MIB/tree.aspx
http://www.novell.com/coolsolutions/appnote/17494.html
Roger

11g on Novell Netware 6.5

Similar Messages

Maybe you are looking for