11g on Windows started all of a sudden to respond very slow on TNSPING

Here is the listener.ora and the tnsnames.ora
# listener.ora Network Configuration File: C:\app\administrator\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
(ADDRESS = (PROTOCOL = TCP)(HOST = odb1.domain.com)(PORT = 1522))
ADR_BASE_LISTENER = C:\app\administrator
# tnsnames.ora Network Configuration File: C:\app\administrator\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
(ADDRESS = (PROTOCOL = TCP)(HOST = odb1.domain.com)(PORT = 1522))
(ADDRESS = (PROTOCOL = TCP)(HOST = odb1.domain.com)(PORT = 1522))
(SERVICE_NAME = odb1.domain.com)
1. the solution use to work like a breeze, until 10 days ago when problems started when after a windows update i restarted the machine.
2. The first time I do a tnsping, I get a response in 20 ms. After that every time I do the same it takes 5000 ms or more
3. Client can't connect anymore over the network (verified the tnsnames to be correct)
4. I can connect only using Local Bequeath connection.
I have seen several cases on the internet but nothing seems to match my case (windows OS)
steps already done: I did add the full name on the hosts file to expedite the resolution
restarted the listener after each change
Any help will be highly appreciated.

I did it and I copy here the result of the file tnsping.trc:
Any idea?
TNS Ping Utility for 32-bit Windows: Version - Production on 29-SEP-2011 16:06:58
Copyright (c) 1997, 2010, Oracle. All rights reserved.
New trace stream is c:\trace\tnsping.trc
New trace level is 4
Attempted load of system pfile source C:\app\administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Parameter source loaded successfully
Successful parameter table load
Log stream will be "standard output"
Log stream validation not requested
nnftmlf_make_local_addrfile: construction of local names file failed
nnftmlf_make_system_addrfile: system names file is C:\app\administrator\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
nscall: connecting...
nttbnd2addr: using host IP address:
nsopen: opening transport...
nttcni: Tcp conn timeout = 60000 (ms)
nttcni: trying to connect to socket 1580.
nttcni: connected on ipaddr
nttcon: set TCP_NODELAY on 1580
nsopen: transport is open
nsopen: global context check-in (to slot 0) complete
nscon: doing connect handshake...
nscon: sending NSPTCN packet
nscon: got NSPTRF packet
nscall: refused
nstimarmed: no timer allocated
nsclose: closing transport
nsclose: global context check-out (from slot 0) complete

Similar Messages

  • Firefox 7.0.1 all of a sudden is running VERY SLOW

    Firefox is so slow that it is easier to load ie8 and use that. It runs fine. I uninstalled Firefox and rebooted. Did not fix. I ran Glary Utilities and it found 400+ fixes. and rebooted, and did not fix. This problem showed early this morning.

    @cor-el thanks - I did this:
    The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
    You can try to decrease the value of the pref network.http.max-connections from 255 to a more modest setting like 30 as used in Firefox 3 versions.
    I also downloaded Speedyfox http://www.crystalidea.com/speedyfox
    I don't know if the outcome was due to one, other or both combined but now FF 7.0.1 is as fast or perhaps even faster than Seamonkey - and that is FAST!!

  • When talking suddenly sounds goes very slow and disappears

    when talking suddenly sounds goes very slow and disappears then i use loud speaker  it happens very often

    when talking suddenly sounds goes very slow and disappears then i use loud speaker  it happens very often

  • Slideshow page appears to load all images at once making it very slow. Is it possible to force it to load just the required items for the immediate page / slide

    Hi Everyone
    First post and a Muse / Web Noob.
    Im building my personal website with muse ( CC and now CC 2014 ) , its quite simple with slideshows embedded inside each other and is just 4 pages in total.
    My two slideshow pages appears to load all images at once making it very slow ( plus 20 secs on my system ). Is it possible to force it to load just the required items for the immediate page / slide. It would be so much faster and would work much better in this particular situation.
    Ive built all the images and icons at the correct size so optimisation shouldn't be an issue. The whole site is only about 42mb.
    Many thanks

    Oh well the problem seems to have fixed itself. It seems it was either a Java or Tumblr problem because the same thing happened when I installed Chrome. It is a lot more stable now and no more crashes yay.

  • Why is the battery life dropping so fast on my iphone 4s. Just started all of a sudden today, never did it before. I already double-clicked the bottom button to see what was running and nothing was running. I checked multiple times and turned apps. off.

    All of a sudden today my battery life just started dropping off on my iphone 4s. I charge it every night. I double clicked the circle button on the bottom to see what was running and there was minimal running but i turned them off anyway. I checked back in a little bit, the same, turned the couple things off again which were like phone and messages... nothing major running. Battery percentage still plummeted til it just turned off.

    Are there apps on your phone right now? 
    I think one of your apps is causing this.
    The only way to find out is to delete them all and then add them one by one to see what app maybe causing this.
    Especially if you've gone thru 3 iphones already.
    When you restored as new - did you sync back your stuff - apps/music or did you restore from backup?

  • TS1398 My 3GS all of a sudden must be VERY close to a modem to recieve a WIFI signal. Tried resetting my network settings with no joy. Any ideas?

    All of a sudden I have to be Very close to a modem to recieve wifi.  Tried resetting network settings, no joy.  This is true for all modems everywhere. Any ideas?

    Your home wifi may possibly be having issues. Call the company that does your wifi and they should send someone out to service it.

  • Ever since start up my computer has being running very slow

    Ever since i started up my OS X Macbook pro today, the first thing that popped up was that my calander had converted to 2001, also my usually automatically connecting wifi was asking for the password. I then noticed how slow my laptop was operating (never been like this before). I have all the updated software and don't know why my computer has all of a sudden started running this slow.
    any help would be muchly appreciated!

    HI there msymon,
    The first thing I would suggest for you to check is to make sure your time and date is set to update automatically. If the time and date are set incorrectly, this can have unexpected symptoms such as the ones you are seeing. Here is an article about setting your time and date correctly:
    OS X: Incorrect date or time displayed in various applications
    Mac OS X 10.6: Setting the date and time
    Thanks for coming to the Apple Support Communities!

  • Suddenly, Firefox is very slow and lethargic and keeps showing an error message on the side of the page. Why?

    Yesterday, I was working on the website, Shutterfly. Suddenly, there was an error message that it couldn't find a certain page. Now, Firefox continues to be very slow... and the error message keeps showing up on the search page, sometimes just parts of the message. I can still search but it is painfully slow and loads page partially and strangely... sometimes not full graphics, etc.

    Or you can try what lots of other people have found, and thats that the base connector is dirty and the contacts are shorted by some debris.
    The Apple store guys are good at cleaning them out - if you do it yourself, do not use any liquids at all.

  • When i start my hot backup my database getting very slow

    I am using following commands for enabling hot backup
    Database altered.
    1 ACTIVE
    2 ACTIVE
    3 ACTIVE
    4 ACTIVE
    and using cp -rp command to copy the file (backup copying speed good) but database performance very slow
    How to improve performance ...
    Vignesh C

    Uwe Hesse wrote:
    It is very likely that you experience slow performance with ALTER DATABASE BEGIN BACKUP , because until you do ALTER DATABASE END BACKUP , every modified block is additionally written into the online logfiles . Doesn't that happen only the first time the block is modified?
    The command was introduced for split mirror backups, when this period is very short. Else ALTER TABLESPACE ... BEGIN/END BACKUP for every tablespace one at a time reduces the amount of additional redo during non-RMAN Hot Backup. There appear to be only 4 files. We don't know how big or sparse they are.
    RMAN doesn't need that at all - much less redo - and also archive - generation then.
    Furthermore, you can use BACKUP AS COMPRESSED BACKUPSET DATABASE to decrease the size of the backup even more - if space is an issue.
    In short: Use RMAN :-)
    Agree with that! Unless the copy is actually going to an NFS mount or something, where I would be concerned whether it is the type of NFS that Oracle likes. I'd also advise a current patch set, as the OP didn't tell us the exact version, and I have this nagging unfocused memory of some compression problems of the "oh, I can't recover" variety.
    I'd like to see some evidence on I/O and cpu usage before giving advice. When I used to copy files like this, it would choke out everyone else. RMAN was a savior, but had to wait for local SAN upgrade.

  • Ipad and exchange 2003 downloads all email every time and is very slow.  We get "no sender" dated 1/1/70 during process.

    Ipad has become very slow to sync with exchange 2003.  suspect IOS releases have IPad beyond older exchange software but need to understand why sync email is so slow and seems to re-download entire mailbox every time sync runs.  Android phones do not have the issue, only ipad.  ipad are up do date, mix of 1,2 and new

    i have two iPads running different mail, one is my work gmail, one my personal mail. Upgraded my personal mini iPad to iOS 7.1.2 and started getting emails dated 1/1/1970, no sender no content coming I daily, the disappear after a few seconds.
    on my other work iPad I haven't upgraded yet am still on iOS 7 but it stopped syncing my email on Friday. I generated a new google password and entered it and when my mail came in there were many emails dated 1/1/1970 with no sender or content, again they disappeared a few seconds later.
    What's going on with the mail?

  • For no reason when I try to sync my iPad I get a message after about 10 minetes sayingitunes has stopped working windows will get back to you if a solution is found.I used to be able to sync no problem this just started all of a sudden

    I get a message every time I truro sync it says iTunes has stopped working windows will contact you if a solution is found.

    I know you can't help with my Yahoo problem, however, apparently at some time in the past I have went to the Sync and tried to figure it out on both my laptop and my desktop, because I have the long snyc key information. However, when I go to try to sync both computers I never get the box to enter that key on either one. That is my problem. So should I try and get a new sync key and see if that works.

  • After copy, paste is not enabled in edit menu selection. Started all of a sudden.

    I've been moving many files that somehow were inadvertantly moved to the wrong folder. I copied quite a few, then one day after I copied a file, (and later verified it was on the clipboard), when I selected the location to copy to, the right click or edit menu options either did not have the paste option, or it was not enabled (faded). What could cause this feature to go away? I wish I could CUT and paste instead. If I try to slide a file to a new location, it becomes an alias and I can't delete the original file. I verified the disk and repaired disk permissions. Any other suggestions?

    Hi Mennax5!
    I have an article for you that can help you troubleshoot the issue you are seeing with iMessages:
    iOS: Troubleshooting Messages
    Thanks for coming to the Apple Support Communities!

  • All of a sudden Firefox is so slow and hanging

    Could someone help me the last few days my firefox has been running so slow and hanging up I uninstalled and reinstalled but still doing it its so slow that I can run like 5 windows in ie with no probs but not even one in firefox I even uninstalled and reinstalled and no luck
    == This happened ==
    Every time Firefox opened
    == a few days ago ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MDDC)

    Hello Amy.
    This kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
    #run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe-mode] to disable all extensions, themes and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins, themes or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
    #update all extensions, themes and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
    #disable all extensions, themes and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
    #enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. Also, try the theme you want to have installed so see if that is what's causing the problem. When you encounter the problems, you know you've found a problematic extension/theme, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
    #you're done! You've fixed your problems with problematic add-ons. If you want to keep using those problematic add-ons, please contant their author for support.
    Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
    #try reinstalling Firefox. No data will be lost. You can get the latest version for free at [http://www.getfirefox.com/ getfirefox.com]. If that doesn't fix the problem, proceed;
    #do a virus/malware check on your computer. If this doesn't fix it, proceed;
    #disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix your issues with Firefox, proceed;
    #check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable them to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
    #check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't work, proceed to the following point;
    #update your modem/router software. There have been some reports that some modem/router software may cause Firefox and other browsers to loose performance and/or stability. If updating doesn't fix your issue, try other versions of the software, if possible. If you need support with this, contact your modem/router manufacturer. If this doesn't help, proceed;
    #clean up your OS registry, using appropriate software. Make sure you've followed my instructions correctly, but if this all doesn't work, [http://support.mozilla.com/en-US/kb/Managing+profiles create a new Firefox profile] (this can be temporary, of course) and see if the issues persist. Report here the results, so we can't help you further.

  • Apple tv all of a sudden not responding to remote and will not pair

    My apple TV will not respond to the aluminum remote it came with.  I have tried pairing the remote again by holding the menu and the right button and will not work.  I also have changed the battery.  The apple tv was able to pair with the remote for my imac, but I would like to have separate remotes.   Any ideas?

    When I take out the battery of the aluminum remote and then put it back the Apple TV will respond with the 3 blinking lights as if it's not paired. But after a while the Apple TV light will not blink or respond to anything from the aluminum remote. Also, the remote worked fine for over a year.
    Not sure if this info suggests anything different then a faulty remote, but just wanted to check.
    Thanks for your help.

  • All of a sudden phone is running slow and the hourglass is on a lot / connectivity problems

    I have deleted  a ton of stored info and have plenty of space.  It was running fine until Monday when I had to switch email carriers.  I tried to link to my computer to update and it is doesn't seem to be doing anything.  It says it's connected, but the files are not trasferring.  Also when I updated the software to 4.7 the email icon was gone on the desktop manager.  HELP!
    Go to Solution.

    figured it out.  thanks!

Maybe you are looking for

  • ICloud Photo Library: How to sync iPhoto/Aperture albums?

    After installing iOS 8 and trying to access Photos, users are presented with a notification titled, "iCloud Photo Library (Beta)." A subsequent message warns, "Photos synced from iTunes will be removed. Syncing photos via iTunes is not supported when

  • ICal syncing problems (with Lion?)

    I've only noticed this since upgrading to Lion but I am having problems syncing my phone and iCal via iTunes. To start, I spent almost 3 hours on the phone with Apple a few days ago and we thought we fixed the issue.  Here were the original problems:

  • How to pass column header as a parameter in Validation Expression (APEX4.0)

    Hello I created a new Page validation in APEX4.0 ( not 4.1 ). (1) Type : Function Returning error text (2) Validation Expression 1 : begin return validate_name ( p_c=> #COLUMN_HEADER# ,p_c_value=> to_date(:p26_LEAVE_FROM,'dd/mm/yyyy') ); end; note: t

  • Score keeper

    I've been hired to shoot basketball games several times a week for my high school, and I need to turn around a finished product by the next day. I wanted to put in a score board or timer at the bottom of the footage I capture. I thought I could keyfr

  • Photoshop Place... Command

    When I try to use the Place command it doesn't place the jpg at the center of the document. This is a problem because I'm using Place in many actions that I've created and if the jpg doesn't start at center of the document, then the translation is of