11g patch set after the s/w n DB installation

Hi,
I have installed Oracle 11g to the following location: ORACLE_HOME=/oracle/app/product/11.2.0/dbhome_1. Installed version is 11.2.0.2.
I wanted to apply PATCHSET 11.2.0.3 before installing the database. but forgot..
Two questions please:
- Now what should be the procedure to do this, and secondly, I should have installed database to the directory 11.2.0.3 instead of 11.2.0 (as above).
- I want db in the directory as specified and then I want to apply patchset to upgrade it to 11.2.0.3.
Thanks
Regards

910385 wrote:
Hi,
I have installed Oracle 11g to the following location: ORACLE_HOME=/oracle/app/product/11.2.0/dbhome_1. Installed version is 11.2.0.2.
I wanted to apply PATCHSET 11.2.0.3 before installing the database. but forgot..
Two questions please:
- Now what should be the procedure to do this, and secondly, I should have installed database to the directory 11.2.0.3 instead of 11.2.0 (as above).There are two phases to any patch/patchset. First is patching the software itself, in the desginated ORACLE_HOME. Second is running some scripts (like catalog.sql, catproc.sql) against any databases that are running from the patched home. Obviously, if you have not created any databases on the patched home, you have nothing to run those scripts against. But if you later move a database to that patched home, you will need to run those scripts.
And be aware that if you used dbca to create a database and select anything other than 'custom' database, the database will be created from a 'seed' database and will probably have to have the patch/upgrade scripts applied to it. If you choose 'custom' database, it will be created from a series of scripts based on a CREATE DATABASE command, and thus will be created at the current patch level.
- I want db in the directory as specified and then I want to apply patchset to upgrade it to 11.2.0.3.Typically the oracle home is only named to the first three decimals, and patchsets are installed into the same home. There is really no need to name your home down to the patchset level, and doing so just creates more work. Been there, done that.
>
Thanks
Regards

Similar Messages

  • Calling From Oracle Forms 11g patch set 2(11.1.1.3.0) to  Oracle Reports 1

    Hi
    While calling From Oracle Forms 11g patch set 2(11.1.1.3.0) to Oracle Reports 11g patch set 2(11.1.1.3.0) I found unable to run report error
    But its finely working in 10g. The Place of error is in find_report_object
    Is any solution to resolve this problem like any registry setting or patches to solve this problem
    Please guide me
    Regards
    Murali N S

    I was able to download it from this link:
    [http://download-llnw.oracle.com/otn/java/jdeveloper/11.1.1.3.0/jdevstudio11113install.exe]
    on the general 11g Fusion download page at:
    [http://www.oracle.com/technology/software/products/middleware/index.html]
    Although the site does appear to be having problems. I got intermittent errors of the page/server not being available.

  • Is Oracle Identity Management 11g Patch Set 5 (11.1.1.6.0) reqd for Essbase

    In the Media pack Readme for parts required to be downloaded for different EPM products, Essbase has Oracle Identity Management 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) listed. Can someone please tell me if this is a must have. If not under what conditions does one need to have this?
    Thanks,
    Ted.

    It is not a must have, if you don't know what OIM is then you probably dont need it :)
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

    Hi to all.
    Currently, i am trying to install patches for portal server.
    The server OS is Sun Solaris 8.
    We are using Oracle9iAS.
    Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
    We managed to install the patch, but have problem with the Post Install Action.
    We managed to run
    -ALTER SYSTEM ENABLE RESTRICTED SESSION;
    -@rdbms/admin/catpatch.sql
    -ALTER SYSTEM DISABLE RESTRICTED SESSION;
    -CONNECT / AS SYSDBA
    -update obj$ set status=5 where type#=29 and owner#!=0;
    -commit;
    But, when we come to the next command, which is to shutdown, it gives us like
    this..
    SQL> update obj$ set status=5 where type#=29 and owner#!=0;
    1402 rows updated.
    SQL> commit;
    Commit complete.
    SQL> shutdown immediate
    Database closed.
    Database dismounted.
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01219: database not open: queries allowed on fixed tables/views only
    We tried to startup the database..it gives us this error..
    SQL> startup
    ORA-01081: cannot start already-running ORACLE - shut it down first
    So, we tried to shutdown again..
    SQL> shutdown immediate
    ORA-01089: immediate shutdown in progress - no operations are permitted
    I been informed that this is maybe a Database problem related. Any ideas?
    Best Wishes,
    Rushdan Md Saad.

    Patchsets could be obtained (only) from http://metalink.oracle.com
    You need to have valid CSI for access.
    P.S: Sorry Werner, I didn't see you post.
    Message was edited by:
    Ivan Kartik

  • How to apply 11.2.0.2 Patch Set on the existing 11.2.0.1.0 database

    Hi,
    I am having a standalone 11.2.0.1.0 database running on windows 2008 r2 64 bit server.
    I have already downloaded the p10098816_112020_MSWIN-x86-64_1of7 & p10098816_112020_MSWIN-x86-64_2of7 patch set software.
    I wanted to know how to apply this 11.2.0.2 patch set on the existing 11.2.0.1 standalone database.
    I could not find any document that gives preinstallation+installation+upgrade+post installation steps.
    All i can see is only readme & welcome document and it does not give any above steps in it. It recommends to choose "Out-of-Place Upgrade" but does not give any "preinstallation+installation+upgrade+post installation" steps. Some documents say to install the 11.2.0.2 software in a new home and then use DBUA to upgrade. Is this merely enough or should we follow any other steps for preinstall and post install?
    Can someone share the steps/links on how to apply the 11.2.0.2 patch on the existing 11.2.0.1.0 standalone database ?
    Regards,
    Ashok Kumar.G

    Hello,
    With the Patchset *11.2.0.2* you have a README ( Oracle® Database Patch Set Notes ) which give you the steps to follow and many references.
    One of the main reference is the Upgrade Guide:
    http://download.oracle.com/docs/cd/E11882_01/server.112/e17222/toc.htm
    The Oracle Database 11gR2 Upgrade Companion may give also many advices.
    Hope this help.
    Best regards,
    Jean-Valentin

  • I am unable to see following SQL Server Analysis Services in central admin services after the SQL 2014 power pivot installations

    I am unable to see following SQL Server Analysis Services  in central admin services after the SQL 2014 power pivot installations
    Ravi

    Hi Ravi,
    Per my knowledge, there is no Analysis Service in SharePoint.
    After running the SQL 2014 setup to install PowerPivot for SharePoint, you need to open the PowerPivot for SharePoint 2013 Configuration tool in Central Admin Server and configure PowerPivot for SharePoint.
    After that, you will see new Service Application called "Default PowerPivot Service Application" in Central Administration.
    If you have other WFE servers, then you need to install the PowerPivot Add-In on all the other servers in the SharePoint farm.
    More references:
    http://sridharbabuk.blogspot.jp/2013/02/installing-configuring-analysis-service.html
    http://msdn.microsoft.com/en-us/library/jj219067.aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-

    Hi, everyone.
    I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-
    after running get-OWAVirtualDirectory or test-OWAConnectivity i'm getting a message that says "OWA it's Orphan, No Metadata information can be found."
    I only have the OWA users impacted.- anywhere users, and ActiveSync are working well.-
    Thanks,
    Fabian Alberto Campo
    MCT-MCSA 2012-MCITP365-MCTS
    Fabián A. Campo H. Consultor tecnico @ IXO Ltda. MCT MCP MCTS MCSA HP-APS Cra. 67 No. 167 – 61 of 303 Bogotá, Colombia

    Hi Fabian,
    Is there any error code when user access their mailbox on OWA. Please confirm if there is no results returned in EMS when you run Get-OWAVirtualDirectory cmdlet. Also check whether there is any Event Logs related to OWA in Exchange.
    In IIS manager, make sure the OWA virtual directory is listed in the Default Web Site. In EMC, we can navigate to Server Configuration > Client Access, select server and turn to Outlook Web App tab. Then we can click Reset Virtual Directory in the right
    Actions pane to reset OWA virtual directory.
    Additionally, please restart IIS service by running iisreset /noforce from a Command Prompt window.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Installing Current patch set after SAP installation

    Hi,
    We are installing SAP ECC6.0 on Solaris x64. We installed the Oracle RDBMS software and missed installing the Oracle Current patch set. We have proceeded with the SAP installation. Can we install the Patches after the SAP installation or do i need to uninstall SAP and do t all over again. Please help asap as i need to complete it..
    Regards
    Dee

    Hello Dee,
    > Can we install the Patches after the SAP installation or do i need to uninstall SAP and do t all over again
    Of course you can install the patchset after the SAP installation. The current patchset is the 10.2.0.4.
    After applying the current patchset - please install also the "on-top" patches - check sapnote #1137346 for this. Also check sapnote #830576 for setting the corresponding database parameters after the patchset installation.
    Regards
    Stefan

  • I am not getting clear alert from OEM 11g Grid, even after the issue solved

    I am not getting clear email alert from OEM 11g, even after the issue fixed.
    For eg: I got critical alert when I have shutdown the DB.But I didn't get clear alert even I have started my DB and is up running.
    I am getting only critical and warning alerts but not clear alerts from 11g Grid control.
    Please help me in troubleshooting the issue....
    Thanks in advance.............
    vgcrl

    Bullitt wrote:
    there email address is [email protected]
    Thank you... I will give that a go...
    Martin

  • Where is JDeveloper 11g Patch Set 2 (11.1.1.3.0)

    From the download link below, it only shows JDeveloper 11g (11.1.1.2.0).
    http://www.oracle.com/technology/software/products/jdev/htdocs/soft11.html
    Where is the newer version 11.1.1.3? I thought it was there last week.
    Thanks,
    Jeffrey

    I was able to download it from this link:
    [http://download-llnw.oracle.com/otn/java/jdeveloper/11.1.1.3.0/jdevstudio11113install.exe]
    on the general 11g Fusion download page at:
    [http://www.oracle.com/technology/software/products/middleware/index.html]
    Although the site does appear to be having problems. I got intermittent errors of the page/server not being available.

  • Oracle 11g patch set

    Hi,
    My vendor recommended to use Oracle 11.1.0.7 + last patch bug.But i m confuse,what did he meant by last patch bug??
    Can any one help me to determine last patch bug??And would would the number??I m using windows 64 bit.
    Thanx....

    user8983130 wrote:
    Hi,
    My vendor recommended to use Oracle 11.1.0.7 + last patch bug.But i m confuse,what did he meant by last patch bug??Probably last PSU. But why not ask to your vendor ?
    Nicolas.

  • Announcement: JDeveloper 11g Patch Set 2 (11.1.1.3.0) is Out.

    I have a message "An error occurred while processing the request. Try refreshing your browser. If the problem persists contact the site administrator". In IE6 and Firefox 3.6, and Chrome 4.

    It is not a must have, if you don't know what OIM is then you probably dont need it :)
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Do someone knows why the secondary click does´t work after the mac os lion´s installation?

    Well,after that I´ve installed the new Mac OSX Lion...and navigate trough the panel,I see that the secondary click doesn´t work. I mark it in the trackpad´s panel but when I open it again,it shows the option with no mark,do someone knows why?

    Same here. Tried a restart but that didn't help.

  • Not applied Patch 5117016 after 10.2.0.2 patch set.

    Hi ,
    database has been upgraded to 10gR2 on solaris 64bit. Patch 5117016 has not been applied after 10.2.0.2 patch set applied. but after that DST patches were applied. here my concern is should i rollback DST patches in order to apply Patch 5117016. as per metalink note:394933.1
    please advise me.
    thanks in advance,
    Hussain.

    Hi,
    I have got problem when I was installing 10.2.0.3.0 Patch Set after succeed installation of Oracle 10.2.0.1 on Windows server 2003.
    Server was shut down by a coworker middle of installation of 10.2.0.3.0 Patch Set resulting that Patch 5556081 : was not applied ( see below opatch_history.txt ) .
    When I try to apply 10.2.0.3.0 again it fails saying that Patch Set is already installed.
    When I run OUI to see what has been installed I see only Interim Patch #5557962.
    I didn't create any database between the installations.
    So I can't apply OpachSet README.html advice .
    Uninstall PathSet :
    C:\> sqlplus /NOLOG
    SQL> CONNECT SYS/SYS_Password AS SYSDBA
    SQL> SHUTDOWN IMMEDIATE
    SQL> EXIT
    Should I try to Create a Database and after that apply OpachSet README.html advice
    C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch_history.txt
    Date & Time : Fri Aug 31 10:56:03 CEST 2007
    Oracle Home : C:\oracle\product\10.2.0\db_1
    OPatch Ver. : 10.2.0.3.0
    Current Dir : C:\oracle\product\10.2.0\db_1\sysman\patches
    Command : apply -silent -local -oh C:\oracle\product\10.2.0\db_1 C:\oracle\product\10.2.0\db_1/sysman/patches/5557962
    Log File : C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch2007-08-31_10-56-03AM.log
    /regards

  • Which is the prefered way to rollback a patch set?

    Hello,
    I am about to apply a patch set to my test database 10.2.0.3. Because of a bug, I need to patch up to patch #27 (7353785). From reading the patch doc, it suggested I backup the ORACLE_HOME mountpoint and also the inventory directory. There is a rollback procedure for rolling back the patch as well.
    1) If after the patch has been applied, what would be the best way to back out of the patch say, after the database has been running for a few days after the patch?
    2) What would be the best way to back out of the patch, a few hours after the patch?
    3) which is preferred, using the rollback procedure (opatch rollback -id 7353785) or using the backup ORACLE_HOME and backup inventory directory taken just before the patch is applied?
    Thank you.

    1) If after the patch has been applied, what would be the best way to back out of the patch say, after the database has been running for a few days after the patch? Use opatch, last option restore from backup.
    2) What would be the best way to back out of the patch, a few hours after the patch?Use opatch, last option restore from backup.
    3) which is preferred, using the rollback procedure (opatch rollback -id 7353785) or using the backup ORACLE_HOME and backup inventory directory taken just before the patch is applied?Use opatch
    Ss

Maybe you are looking for

  • Apache Help! Computer has slowed to a crawl & no net access

    After following tutorials: firstly here, and secondly here, my laptop has slowed to an excruciating crawl, when the machine boots it asks for my username and password when the Sys Prefs are set to auto log in. It also can't access the net anymore. It

  • How to lose the window bars in Gnome 3?

    I mainly use a amall screened netbook and I'd very much like to get rid of the window bars in Gnome3 as I find they use up too much space and I'd rather use the keyboard to close the open windows and move the windows. I really don't know where to loo

  • PowerPoint 2010: deactivate/disable right click context menu

    Hi, I am looking for a way to deactivate/disable the right click context menu in PowerPoint 2010/365. For the editing font menu it works with the registry entry Go to: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Common\Toolbars\PowerPoint Create

  • Cant Put Itunes Onto My Ipod

    Im ready to throw my ipod out the window...its a first generation shuffle and I cant get songs onto it! Ive read that you click on your Ipod under DEVIVES but devices isnt anywhere on my page!! PLZ HELP ME!!!!! Dell   Windows XP  

  • Use of Audio & Video in Encore Menus (CS4)

    Hello, I'm using Encore CS4 on Windows 7.  I've searched for some tutorials or other posts on the topic, which were helpful, but incomplete.  I want to add a video preview with audio on the main menu of a standard DVD (not blu-ray).  However, I want