11g problem with Win7 starter

Taking a class and the book came with Oracle 11g DVD. Tried to load it onto my laptop and get an error when checking the operating system. The error is something like "expecting 5.0, 5.1, or 6.0 received 6.1" which I am assuming refers to Win7 vs vista/xp etc... Is there a way I can tell from the DVD 11g version # (afraid I don't have it in front of me now) which version of 11g came with the book and which version file(s) I should download from Oracle to run with Win7 starter?
Thanks in advance
Bill

Ok, I get that its certified for Pro and Ultimate (which I don't think I can run on my netbook I use for homework), but I think I veered the conversation away from my original point. The version of Oracle 11g which came with my textbook says it will run on win2k, winXP, and Vista but craps out when trying to load onto Win7. The version of Oracle (to best of my recollection, as I don't have the disc in front of me is 11.0.1.something).
I guess my big question is would this version load on Win7 pro or do I need a newer version of Oracle that will load onto Win7? If I do need a new version in order to load on Win7, how can I tell which flavor of Oracle I have on my DVD - the free version, the next one up with a student license???
Worst case scenario, I load it onto my desktop that is still running XP, but I would like to be able to take it with me on the netbook to do my homework whenever I find time.
Thanks,
Bill

Similar Messages

Re: Problems with Win7 start-up on new Satellite L670-17x

Hi guys,
three days ago I received my new Toshiba Satellite L670-17x. The installation of Win7 was not a problem, but now (after the third or fourth boot) I suddenly have a big trouble with the OS.
When I switch on my Notebook, it loads till I can see the Windows loading screen. Then - at once - the Notebook stop working... I only see the loading screen, but nothing happens. The litte light at the frontsite (which shows that the Notebook loads/works) goes off. No error messages.
I want to avoid to use the Toshiba HDD Recovery, because I saved some (important) documents on the desktop (I know... not very intelligent). I ask you to help me with my problem.
(By the way: I allready tried the Startup Repair, System Restore, Windows Memory Diagnostic Tool and to start Windows in the Safe Mode).
Thank you for your answers!

If you cannot start OS in safe mode, than, I think, you have a big problem. Im afraid only HDD recovery installation will help you with this.
The question is what to do with these data.
Maybe you should remove HDD and connect it to other computer as external one to have full access to all these data. Copy them, put HDD back into your Satellite and install OS again using HDD recovery option.

Hi, I have a Macbook Air 13 "and I have a problem with it starting when I open it and the logo appears below a cerculer that spins and nothing else. Still not opening up

Hi, I have a Macbook Air 13 "and I have a problem with it starting when I open it and the logo appears below a cerculer that spins and nothing else. Still not opening up

Hi aysha13
Do check the article provided by BGreg. If it's not a h/w issue, you will be able to resolve it.
Good Karma.
Holydevil.

Problems with new start button right-click context menu

I have been unable to come up with a rhyme or reason to this problem.
For some reason the Windows 8.1 start button will no longer respond to a right-click. The context menu will not come up. You can see that the active window is no longer active because the border color changes. The start button works as
expected when left-clicking it.
I first noticed this on a brand new Windows 8 machine that I upgraded to Windows 8.1. The problem occurred while I was messing with trying to customize the default user profile. The next time I logged in with a new user account the start button
was broke. The system I was using was stripped down. It had NO additional software on it except the drivers and necessary associated applications, and all available Windows updates were installed. I chaulked it up to something I messed up.
Next, I reformatted 20 lab computers with Windows 8.1 Pro and joined them to a Server 2003 domain. Users have roaming profiles and folder redirection policies. The folder redirection policies redirect AppData, Documents, and Desktop to a folder
on the server and the contents of these folders are shared between Windows XP and Windows 8.1. The roaming profiles are unique and new. Thus far all users have only logged on to Windows XP so they have the version 1 profile and when they logon
to the Windows 8.1 box a new .v2 profile folder is created.
Today, we logged about 12 users into these individual machines for the first time and about 3 or 4 of them could not right-click their start button. Once the problem occurs, it never goes away regardless of what machine they log into. The only
way to solve the problem is to default the profile off the computer and delete the roaming profile folder off the server. The problem has reoccurred after this but I'm not sure what triggers it.
In addition, I have tried renaming the user's redirected application data folder and letting Windows 8.1 create a new one in case there was a conflict with a Windows XP setting. This did not resolve the issue.

In my environment we had a network "Default User.V2" profile that we used with Win7 clients. Now, with Win8 and Win8.1 we've configured the clients to use V3 and V4 profiles (http://support.microsoft.com/kb/2887239/en-us).
That link is for the Win8 hotfix, which changes the roaming profile of users to .V3, but there's also one for 8.1 and it changes the profile folder to .V4.
Anyway, we have since deleted the Default User.V2 from our network. In testing the creation of .V4 roaming profiles with Win8.1, I've figured out a little more about the WinX folder. If I have a roaming profile and log into a Win8.1 computer
for the first time, the WinX folder is created as part of my profile during the "Hi, we're setting things up, many bright colors" spiel before you get to the Metro screen. However, when I log out, because the WinX folder is in the Local AppData, it doesn't
get uploaded to my roaming profile location. If I then log back into the same computer, everything is fine because that computer still has a local copy of my profile with WinX in the Local AppData. However, if I log into any other computer, the
WinX folder doesn't get created and I can no longer right click on the Start menu (until I copy it to my Local AppData on that computer).
So, it seems that when I first log in to a Win8.1 computer and go through the "Hi....etc etc....many different colors" startup, the WinX folder is created and will work on that computer, but if I log into another computer, it isn't downloaded as part of
my roaming profile or re-created. Also, if you have the GPO set to delete copies of roaming profiles off of the computer when a user logs out, I would guess that the WinX folder would then get deleted and when you log back in you'd have the same issue.

Stability problems with Win7 x64 and Boot Camp 3.1...

Before I was running win 7 with Boot Camp 3.0 and On top of that I installed my Chipset and Graphics from Nvidias Website. System was running without any major problems.
Now I have win7 and BootCamp 3.1 and the laptop runs like crap... System freezes sometimes only for a minute most of the time I need to hold power button.
The last time I has ScanDisk start on me and start checking. it found about 200 missing files some unindexed and MFT bitmap was repaired...
Do not know why, I'm unable to figure out what was causing that.
Currently I have win7 x86 with bootcamp 3.1 installed and The system works good.
I think there is an issue with the 3.1 x64 driver package.
If anyone has any Ideas on what I can do to figure out why the system runs so unpredictable with 3.1 x64 drivers installed. I'm whiling to experiment and reinstall win7 x64 as many times as needed so i can send an error report to apple to get this issue fixed.

Wow, i've been running windows 7 64 bit in boot camp since I got my copy as a beta tester in July and never had any issues like you're describing. Boot camp 3.0 worked fine (other than the light in the audio port and minimal touchpad control, and the still present inability to dim the screen dynamically based on brightness around me). And I've had no problems with boot camp 3.1 so far. In the previous BC versions, I went to the nvidia site and downloaded whatever the current driver was for the video, but nothing specific for the chipset. With 3.1 I haven't done even that, just using what the boot camp update installed. Have you tried it with just the BC 3.1 drivers, not getting anything extra from Nvidia or anyone, just to see what happens from that point first?
About the only time I had any issues with diskchecking is when I accidentally close fusion and it abends my windows session. I make a point then of booting and telling it to ignore the disk check, editing the registry to reset the flag so it doesn't do it, then just run a disk check from within windows telling it NOT to fix anything, so that it can verify it's clean. I found the normal disk check in the preboot environment is horrendous on the MBP, takes me literally hours to run through despite it never finding anything to fix.

I've got a mac pro problem with the starting up, but also a red light on the logic board solidly on. Its not among the diagnostic led. It's located near the BT adapter and the front fans. Also the fans run loud also. any solutions?

Hi
I've got a mac pro late 2006, and i am having problem with it for quite a while now. the problem i am facing is the start up process, and the red light on the logic board. Earlier I've got the two led on the diagnostic leds 5 and 6 turned on without the diagnostic button being pressed, and i think those are related to the processors overtemp. I've managed to solve that by, removing the processors and re applying the thermal compound on the heatsink. what i have left now with is the red light on the logic board at the time i plugged in the power. At the same time when this light come on, the power indicator at the front panel come on as well. i am not sure what is this light relates to. We've replace the power supply too, and gone through the SMC reset but seems no help.
Any idea on the problem? I am desperate about it, and i will be greatful if anyone can help..
thanks and hope for your best solutions
Kari

I can't help directly with your problem but you might check here http://tim.id.au/laptops/apple/macpro/ for a service manual which could answer your question.

Wierd problem with web start in windows 7

I have a wierd problem with my web start app in windows 7, it just hang it self. it work fine in windows XP and Vista.
The wierd thing is that i can open the app but when i press on a specific button that will make a jlabel present a .png image everthing crash. why do i get this problem now? when i start the app, i load some pic i jlabels and that seems to work fine, but when i do it under the exection it seems to crash, why?
Should i do something different to make the app work in windows 7?
I hope someone can help me out!!

You should:
a) open the console (java control panel, advanced options) and see the stackTrace (if any). If it's not there check for swallowing.
b) post a code snippet, to at least show how and where you retrieve the png. Possibly a SSCCE.
c) check if this happens also running as a standalone app (may be more Swing-related than JWS-related).
Bye.

Problem with Getting Started

Alright I'm having a problem with the Mac instructions for Getting Started with Alchemy (http://labs.adobe.com/wiki/index.php/Alchemy:Documentation:Getting_Started)
Basically step 13 when I type :
gcc stringecho.c -O3 -Wall -swc -o stringecho.swc
gives me the following output
Macintosh-3:stringecho aman$ gcc stringecho.c -O3 -Wall -swc -o stringecho.swc
stringecho.c:10:17: error: AS3.h: No such file or directory
stringecho.c:14: error: syntax error before ‘echo’
stringecho.c:14: error: syntax error before ‘AS3_Val’
stringecho.c:15: warning: return type defaults to ‘int’
stringecho.c: In function ‘echo’:
stringecho.c:22: warning: implicit declaration of function ‘AS3_ArrayValue’
stringecho.c:22: error: ‘args’ undeclared (first use in this function)
stringecho.c:22: error: (Each undeclared identifier is reported only once
stringecho.c:22: error: for each function it appears in.)
stringecho.c:29: warning: implicit declaration of function ‘AS3_String’
stringecho.c: In function ‘main’:
stringecho.c:41: error: ‘AS3_Val’ undeclared (first use in this function)
stringecho.c:41: error: syntax error before ‘echoMethod’
stringecho.c:47: warning: implicit declaration of function ‘AS3_Release’
stringecho.c:47: error: ‘echoMethod’ undeclared (first use in this function)
stringecho.c:50: warning: implicit declaration of function ‘AS3_LibInit’
stringecho.c:50: error: ‘result’ undeclared (first use in this function)
Macintosh-3:stringecho aman$
From what I gather it seems that some files are missing (AS3.h) which is why the errors and warnings are caused... is there anything I have to do to get that file
If anyone can help explain whats wrong and how to fix the problem it will be greatly appreciated
Skribbs

ausrelemac wrote:
No, I enter pin, everything was fine, even wrote that connected to the network.
then swipe to the left, to connect to the wi-fi and then writes: searching a mobile network. and can do nothing.
maybe my sim is not suitable ? I buy a sim free device...
do you have a data plan on it?
if not then you need to set it up with wifi
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

After years of never a problem with lightroom started with lightroom 5 yesterday and today all of a

After years of never a problem with lightroom, yesterday i started wiith Lightroom 5 and today all of a sudden in development mode everything just stopped working. No matter what I do none of the sliders have any effect on the picture whatsoever.
Please help Duncan

you'll need both serial numbers to install the lr 5 upgrade.
if you purchased and downloaded lr 4 from adobe or registered with adobe, you may be able to find your lr 4 serial number under the account used to make that purchase/registration (not necessarily your current adobe id), Adobe ID
and adobe support may be able to help you, contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Obiee 11g . problem with set default as columnname in interaction tab

Hi Obiee gurus ,
I have small problem with set default option in interaction tab in column properties. actually my problem is , i changed one column bold save as set default option bold and how to revert back to my column option. when i create new analysis with same name . it takes set default option for that column.
can Please give some suggestion for this problem.
regards
Srinivas

Hi Srinivas,
i guess this will be same for 11G
Refer
http://blogs.oracle.com/siebelessentials//2008/08/remove_systemwide_default_sett.html
thanks,
Saichand.v

Oracle 11g problem with creating shared memory segments

Hi, i'm having some problems with the oracle listener, when i'm trying to start it or reload it I get the follow error massages:
TNS-01114: LSNRCTL could not perform local OS authentication with the listener
TNS-01115: OS error 28 creating shared memory segment of 129 bytes with key 2969090421
My system is a: SunOS db1-oracle 5.10 Generic_144489-06 i86pc i386 i86pc (Total 64GB RAM)
Current SGA is set to:
Total System Global Area 5344731136 bytes
Fixed Size 2233536 bytes
Variable Size 2919238464 bytes
Database Buffers 2399141888 bytes
Redo Buffers 24117248 bytes
prctl -n project.max-shm-memory -i process $$
process: 21735: -bash
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged 64.0GB - deny
I've seen that a solution might be "Make sure that system resources like shared memory and heap memory are available for LSNRCTL tool to execute properly."
I'm not exactly sure how to check that there is enough resources?
I've also seen a solution stating:
"Try adjusting the system-imposed limits such as the maximum number of allowed shared memory segments, or their maximum and minimum sizes. In other cases, resources need to be freed up first for the operation to succeed."
I've tried to modify the "max-sem-ids" parameter and set it to recommended 256 without any success and i've kind of run out of options what the error can be?
/Regards

I see, I do have the max-shm-ids quite high already so it shouldn't be a problem?
user.oracle:100::oracle::process.max-file-descriptor=(priv,4096,deny);
process.max-stack-size=(priv,33554432,deny);
project.max-shm-memory=(priv,68719476736,deny)

HT1766 anyone having problems with the start button

Is anyone having problems with the Iphone 4 start button not working

What is the start button?
Do you mean the on/off button, or the Home button?
If either one is not working at all, more than likely there is a hardware problem.

If you have problems with Yahoo, start FF4 in safe mode and see if it works. If yes, you have a problem with one of your add-ons.

Apparently some of your "good" add-ons do not work right with FF4. If you have a problem with YAHOO MAIL, start FF4 in Safe Mode (Restart with add-ons disabled from the Help menu). Then try your Yahoo again. If everything works, then the problem is with one of your add-ons. You can selectively work out which add-on is the problem. For a lot of these user problems, this should help... worth a try anyway.

Anything?

Problem with daemons start display [SOLVED]

Hello,
I have a problem with the display of daemons startup, i'm not sure what could be wrong, here's a screenshot taken y fbgrab
rc.conf -> http://arch.pastebin.com/618485

_Gandalf_ wrote:Just edited mkinitramfs.conf and added my resolution and of course regenerated the archck image, this worked...
When adding the resolution and theme to mkinitramfs.conf, does it need to be presented in quotes (as shown below) or without quotes?:
Or does it make a difference??
# Add a theme to enable fbsplash, Try 'darch', it's included in the gensplashutils.
FBSPLASH_THEME="darch"
# Resolution to use, 1024x768 will be used if left blank. Format is '1024x768'
FBSPLASH_RES="1024x768"

Obiee 11g problem with dimension time DATETIME

Hi experts!
I have a problem with a column of my time dimension. In my database I have a column called "DATE" and it has this format "01/12/2009 00:00:00" (property column is DATETIME) when I import this table in Oracle Administration I see the same format that my database but I want to see without any Hours,minutes...like this: "01/12/2009"
How can I fix this??
Thanks!!!

Hi alex,
check the column name your passing and then cast it....the error is not related to that i suppose as it is internal assertion.
chk this http://tipsonobiee.blogspot.com/2009/06/error-nqserror-46036-internal-assertion.html
UPDATED POST
You can alternatively use oracle trunc function in the physical layer to trunc the timestamp.
1) go to the table where the date column is coming in physical layer
2) go to the general properties and select SQL and write the SQL of all the columns needed from that table like
select x,y,z,trunc(date) from table_name.
3) this truncates the timestamp
UPDATED POST-2
By the way which database are you using,if its oracle trunc works out....other databases it wont work
select trunc(sysdate) from dual in your TOAD and check out.
hope helps you,
Cheers,
KK
Edited by: Kranthi.K on Jul 27, 2011 3:15 AM
Edited by: Kranthi.K on Jul 27, 2011 4:01 AM

11g problem with Win7 starter

Similar Messages

Maybe you are looking for