11g R1 on Windows 2008 R1 64-bit - Stuck after clicking setup.exe

I ran setup.exe and it's stuck / hung, consuming a full core. I don't even get the prerequisites window to appear. I'm installing over RDP with a console session with admin rights and I even ran setup.exe as Administrator. The server is running in VMware. Any thoughts why this would happen?

The server is running in VMware. Any thoughts why this would happen?I am afraid but Oracle on VMWare is not supported. There is a Metalink Note basically saying: "It´s not supported but you can do it. If you face problems we know of we will deliver the solution to you as we would on native hardware. If the error is new you have to reproduce it on native hardware".
You could try several things:
1. Re-Download the file
2. Make sure architecture (32-bit or 64-bit) of database and operating system match
3. Re-Install Windows and try again
4. Run Setup.exe in debug mode to gather more information
Ronny Egner
My blog: http://blog.ronnyegner-consulting.de

Similar Messages

  • Install Forms 11g FM on Windows 2008 64 bit

    Has anyone been able to install FM 11g (Forms etc) on Windows 2008 Server 64 bit.
    Every time I attempt an install I get the OUI checking for swap space and monitor configuration. After that the OUI goes away and nothing else happens.
    The entries in the installactions file is below.
    Using paramFile: D:\Install\Disk1\install\win64\oraparam.ini
    Checking swap space: must be greater than 500 MB. Actual 7154 MB Passed
    Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
    The commandline for unzip:
    D:\Install\Disk1\install\win64\unzip -qqqo ..\..\stage\Components\oracle.jdk\6.0.10.33.0\1\DataFiles/"*.jar" -d "C:\Users\S-OTG~1.MAT\AppData\Local\Temp\2\OraInstall2009-09-22_08-56-31AM"
    I have installed the WLS using the 64 bit version of JRockit with no problems.

    I reviewed your SR and wanted to clarify a few things. In the SR, you were not exactly told that installing (in general) was not supported on Win2008(x64). You were simply told that you could not use the 32bit download on a 64bit machine or install the Builders on x64. If you were told something else in a call I apologize as that information may have not been correct. Additionally, the SR is very confusing because you go from talking about Win2008 to XP to 2003 back to 2008 and so on. This is a very difficult way to troubleshoot. Dealing with one problem at a time will almost always result in the fastest resolution time. That said, here are the facts based on the platforms you mentioned in the SR.
    1. Windows 2008 (64bit): This platform is intended for deployment (server). Although it may be possible to install the Forms/Reports Builders on this platform, Oracle is currently not supporting the Builders on any 64bit platform. Plans to support 64bit Operating Systems for Builders is still under review. So, for now, you must use the 64bit download to install on a 64bit platform. If you choose to attempt the installation of the Builders on this platform, you do it at your own risk.
    2. Windows XP and Vista (32bit): These platforms are generally considered "client" platforms. These platforms are supported for using Builders. Technically they are not supported to be used as servers. Therefore, HTTP Server and Web Cache are not supported on these platforms. More details are explained in the Release Notes:
    http://download.oracle.com/docs/cd/E12839_01/relnotes.1111/e10132/intro.htm#sthref8
    3. Windows 2003 (32bit): This platform can be used with both the deployment components and the design-time components. That said, being a 32bit platform, I would not recommend trying to run a prod system and attempt to develop on it as well. Certainly, doing application maintenance on this machine would be fine, but if you were running a prod environment here, I would not suggest running the Builders full time too. 4gig of RAM or more would definitely be needed. See the following:
    http://support.microsoft.com/kb/283037
    Now, the actual problems you had/have:
    Configuration failing when installing on Win2008 (64) - Looking at the SR, this appears to have been the result of trying to use the 32bit installation on the 64bit box. Upon initial release of the product, 64bit Windows distributions were not available. However, they are now and must be used on 64bit Windows 2008 and 2003 platforms. Refer to the OTN Download area.
    Also seen in the error log was a connection issue. This is often caused as a result of several things, but the most common causes are WLS (node manager) is not running or the machine is under powered (usually lack of RAM). Regardless of what is documented, experience shows that a Windows machine will need to have at least 3.5 gig of RAM in order to support the installation process. This assumes that nothing else is running during the installation process unless it is absolutely needed. It seems that 4gig or more offers the most likely chance of a successfull installation on the first attempt.
    Regarding the error which suggests that a given service already exists. This could likely happen if you attempted an installation, but it failed then you attempted to re-run the installation without first doing a thorough clean-up.
    On the XP installation it appears that there was some memory issues. From the log: java.lang.OutOfMemoryError. As I mentioned, for the most likely chance of success, the machine should have at least 3.5 gig of RAM. If you are just installing the Builders you can have less, but if the config portion fails, you will probably see the connection failure seen in your other attempts. When/if this failure occurs, do not exit or do anything with the installer. Allow a minute or two (or more) for the new instance to completely start then select the Retry option. You will likely find that the configuration will complete successfully.
    Also, important for any installation type.... When installing WLS, UNcheck the Launch Quick Start option that appears near the end of the WLS installation. Running this creates a default or demo instance. Unless you are planning to use this example instance, leaving it out can give back as much as 500 meg RAM in some cases. If you have already installed it and don't want to reinstall, stop whatever processes start as a result of that example instance.
    SUMMARY
    1. Be sure you are installing the correct software for your platform type. 64bit software for 64bit OS
    2. On Windows, ensure that you have either installed the Loopback adapter or added your host name to the hosts file. Refer to Section 2.3:
    http://download.oracle.com/docs/cd/E12839_01/install.1111/e10421/install.htm#CHDEAAGD
    3. Ensure that the machine has at least 3.5 gig RAM. For systems with less, expect to see failures during the configuration portion of the install. Use "Retry" to overcome this.
    4. Builders are only supported on 32bit platforms at this time:
    http://download.oracle.com/docs/cd/E12839_01/relnotes.1111/e10132/intro.htm#sthref8
    5. Ensure that WLS node manager is running before installing FMw
    I don't think I missed anything, but just be sure to review the Installation Guide AND the Release Notes.

  • Oracle 11g 2 sobre Windows 2008 64 bits

    Hola a todos... tengo el siguiente problema.... cuando instalo Oracle 11g sobre Windows 2008 de 64 Bits aparece un error en la instalacion.... me dice error de protocolo.
    Se intala sobre Windows 2008 de 64 Bits con un dominio
    Ademas cuando no carga el EM
    Saludos
    Jorge

    No.
    Oracle Warehouse Builder version 10.1.x was desupported on 16-JUL-2007.
    The desupport notice is available on Metalink (Note 376384.1).
    The Warehouse Builder installation as part of the 11.1.0.7 installation should be certified, but I cannot find specifics.

  • Windows 2008 server (64 bit) setup not starting?

    To all,
    Windows 2008 server (64 bit) setup not starting? downloaded v17228-01-2of2 and v17228-01-1of2? Any ideas why the installer not starting?

    Installing oracle database 11g( 64bit) on a windows 2008 server (64bit). I do not get the setup tool to start
    Downloaded
    Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64 (Part 1 of 2) V17228-01 Part 1 of 2
    and
    Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64 (Part 2 of 2) V17228-01 Part 2 of 2
    Edited by: user731811 on Oct 14, 2010 1:11 PM

  • Oracle Database 11.2.0.1.0 CPU hit 100% on Windows 2008 R2 64 bit Hyper-V

    Oracle Environment Detail:
    Oracle Database Enterprise Edition :11.2.0.1.0 (NON RAC, No failsafe)
    O/S:     Windows 2008 R2 64 bit (6.1)
    Specifics: Virtual Server using Hyper-V
    Memory: 9 GB RAM
    Processor: E5540
    Specific about the issue:
    I have two database instance created on this server with ‘memory_target=3600M’ each.
    I am getting into an issue where I find NO activity on database except regular schedule job running using DBMS_SCHEDULER –
    •     Database FULL export DAILY schedule time 7 & 7:30 PM accordingly for both instance (takes about 15-20 mins each)
    •     Database FULL RMAN DAILY schedule time 9 & 10 PM accordingly for both instance (takes about 35-40 mins each)
    This was set up on Feb 25th 2011. Since then we have encounter CPU hit 100% TWICE in this system at around 8:30 PM (SAME TIME). Both database instance exports keep running and never finish. While RMAN schedule job has NO problem. Mostly everything runs every smoothly without any issue.
    Replicate the issue:
    I am unable to replicate this issue and do not know the cause of the issue.
    Work Around:
    Oracle services shutdown/Server reboot.
    Would anyone know about this issue? Have any information could help? This system will become production soon and want to make sure we have solution for this.
    Thanks in advance!

    I am finding that CPU hit 100% is very specific to Oracle 11.2.0.1.0 Export Utility (exp) used to take FULL database export. I understand Original Export is desupported from general use as of 11g but available for specific need.
    Have anyone faced this issue with 11.2.0.1.0 Export Utility (exp)? Please help.
    I have a need to use export utility which gives us migration options.
    Thanks!

  • Which version of Oracle database is certified on  Windows 2008 R2 ( 64-bit)

    We have a Microsoft Windows 2008 R2 (64-bit) server.
    I wanted to know which Oracle database version is 100% certified on the above OS.

    Hi Sirini;
    10.2.0.5 is supported - see MOS Doc 1061272.1 (Statement of Direction: Oracle Database 10g Release 2 Client (10.2.0.5) with Microsoft Windows 7 and Windows Server 2008 R2)Correct;
    11gR2 is also supported - see MOS Doc 867040.1 (Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2)There is a setup on this link:
    Oracle Database 11g Release 2
    (11.2.0.1.0)
    Microsoft Windows (x64) File 1, File 2 (2GB) See All
    I am little bit confused for this, as you mention note and also certification matrix says 11gr2 certfied with Win2008-64 bit. But there is no specific setup like win2008-64 bit, there is only Microsoft Windows (x64) setup
    By the way for 10gR2 on win 2008 64 bit platform there are 2 setups. Those are:
    Oracle Database 10g Release 2
    Oracle Database 10g Release 2 (10.2.0.4) for Microsoft Windows Vista x64 and Microsoft Windows Server 2008 x64
    Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (x64)
    So i had issue for my client and oracle worker support me to use 10.2.0.4 for my issue, not second setup. So for 11gR2 could be work for Microsoft Windows (x64) but i am not sure %100 coz never tried before.
    i appreciate, If someone share their experience to make installation 11gR2 on win2008-64 bit wiht Microsoft Windows (x64) setup
    All those upper setups can be found at:
    http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
    I do not believe 11gR1 is currently certified with Win 2008 R2.Please check below link:
    http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
    Oracle Database 11g Release 1 Standard Edition, Standard Edition One, and Enterprise Edition
    (11.1.0.7.0)
    Microsoft Windows Server 2008 (32-bit) (1.9 GB) | See All
    Microsoft Windows Server 2008 x64 (1.9 GB) | See All
    Regard
    Helios

  • OBIEE 11.1.1.6.0 installation on windows 2008 R2 64 bit failing

    I installed OBIEE 11.1.1.6.0 version on windows 2008 R2 64bit;installation has no issues all went well and sample app displayed fine.But, i see scheduler is not starting and also we deployed our code but reports failing with following oracle oci error
    View Display Error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: The specified module could not be found. [nQSError: 46029] Failed to load the DLL D:\OBI11G\Oracle_BI1\bifoundation\server\bin\nqsdbgatewayoci10g64.dll. Check if 'Oracle OCI 10G' database client is installed. (HY000)
    i also installed and verified by installing 11g client;PATH variable setting etc. no exact solution.i would like to see if any other also facing same issue with OBIEE 11.1.1.6 on windows 2008 R2 64 bit OS.
    Thanks

    Deva
    i didnt get what you mean by rpd client.,if you mean Admin tool, installation is OBIEE 'simple installation' type which includes Admin tool.
    coming to connectivity, no from physical layer you cannot view data as the packaged dll file (nqsdbgatewayoci10g64.dll ) is not registering in Windows 2008 64 bit,which i even tried manually.
    since above step is failing, i also installed a 11g db client(to divert oci connections) which is working fine for oracle connectivity and updated PATH environment variables but this issue is still in place.. as reports still pointing to Oracle_BI1/bifoundation/server/bin/ dll files
    please share your thoughts

  • Windows 2008 server 32 bit support

    Hello,
    Is MaxDB officially supported for Windows 2008 server 32 bit  platform?
    Thanks,
    Jose

    Jose Lopez wrote:>
    > OK, then perhaps mention specifically W2003 in the download link?
    Hmm... about what download link are you talking?
    The one in the download area here in SDN?
    If so, then this is not relevant for SAP customers as they should get all their software via DVD delivery or the Service Marketplace downloads!
    In the service marketplace download sections there are no restrictions given, since the Product Availability Matrix (https://service.sap.com/pam) contains all the release/support information.
    In general, the PAM is the one single place to check for supported versions.
    regards,
    Lars

  • EPMA 11.1.2.1 config on windows 2008 R2 64 Bit

    Have issue's with EPMA 11.1.2.1 config on windows 2008 R2 64 Bit ,
    RDBMS : SQL 2008 R2 64 bit (pre config SQL tasks compalted)
    IIS 7.0
    IPV 6 disabled to resolve binding issue
    EPMA services are up and running but
    Diagnostic Log:
    Following components are failed in the diagnostic log, all of them have same message.
    EPMA service is working
    AppMgrLoadAdf
    DimEditorLoadAdf
    EnumApplications
    EnumDataSyncs
    EnumDimensions
    Launch external checker with next command: D:\Oracle\Middleware\EPMSystem11R1\..\jdk160_21/bin/java -DEPM_ORACLE_HOME=D:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=D:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=D:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.appmanager.AppMgrLoadAdf
    Error: AppMgrLoadAdf failed when requesting information from EPMA. Please check that all EPMA services have started and are currently running.
    Recommended Action: Make sure external checker is working.
    Error in Workspace for EPMA:
    Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with POST method: 503
    Recommended Action: Check application is started.
    Any suggestion are appreciated, i am running against wall on this error.
    Thanks

    Check the logs for "Hyperion EPMA Web Tier - Web Application" and "Hyperion EPMA Data Synchronizer - Web Application"
    e.g. <MIDDLEWARE_HOME>\user_projects\<instancename>\diagnostics\logs\services - HyS9EPMAWebTier-sysout.log, HyS9EPMAWebTier-syserr.log, HyS9EPMADataSynchronizer-sysout.log, HyS9EPMADataSynchronizer-syserr.log
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Smart View 11.1.1.3.500 Install on Windows 2008 R2 64 Bit SP1

    Wanted to check if any one form user community was able to install Samrtview 11.1.1.3.5 on Windows 2008 R2 64 bit SP1
    Think support matrix says its compatible with windows 2008 64 bit but not R2 - Any round about solutions to get his installed on R2 would help.

    I have tried in Server 2008 R2, i did not face any issues, again i did not use that extensively

  • CF 10 continues to crash on Windows 2008 R2 64 bit

    I have had CF 10 running on my VM for about a week now. The VM is Windows 2008 Enterprise, 64 bit. CF 10 is 64 bit.  The error that I keep getting is:
    Service Temporary Unavailable!
    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
    Jakarta/ISAPI/isapi_redirector/1.2.32 ()
    To recover, I need to stop and restart all the CF services.
    Anyone else having this problem or has anyone else had to fix it?

    Of interest here are some CF10 metrics logging I took as a sample to compare.
    05/06/2012
    8:49 AM
    Information
    scheduler-1
    Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 378536 Request count: 201 Error count: 4 Bytes received: 780 Bytes sent: 6993022 Free memory: 45875240 Total memory: 175702016 Active Sessions: 0
    05/06/2012
    8:48 AM
    Information
    scheduler-2
    Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 378536 Request count: 201 Error count: 4 Bytes received: 780 Bytes sent: 6993022 Free memory: 47207152 Total memory: 175702016 Active Sessions: 0
    05/06/2012
    8:47 AM
    Information
    scheduler-0
    Max threads: 150 Current thread count: 4 Current thread busy: 1 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 52128072 Total memory: 175898624 Active Sessions: 0
    05/06/2012
    8:46 AM
    Information
    scheduler-1
    Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 59819016 Total memory: 167116800 Active Sessions: 0
    05/06/2012
    8:45 AM
    Information
    scheduler-1
    Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 61154744 Total memory: 167116800 Active Sessions: 0
    05/06/2012
    8:44 AM
    Information
    scheduler-1
    Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 62484720 Total memory: 167116800 Active Sessions: 0
    05/06/2012
    8:43 AM
    Information
    scheduler-2
    Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 63821448 Total memory: 167116800 Active Sessions: 0
    05/06/2012
    8:42 AM
    Information
    scheduler-2
    Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 65154032 Total memory: 167116800 Active Sessions: 0
    05/06/2012
    8:41 AM
    Information
    scheduler-1
    Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 66487544 Total memory: 167116800 Active Sessions: 0
    05/06/2012
    8:40 AM
    Information
    scheduler-0
    Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 67824496 Total memory: 167116800 Active Sessions: 0
    The online CF10 documentation omits CF10 metrics logging details so I am not sure what to make of the log detail differing. Reference:
    http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf3638e6-7fe 0.html#WSc3ff6d0ea77859461172e0811cbf3638e6-7fda
    I don't think the logs have been any use so far. Still interested to know why CF10 is crashing for you. Something else comes to mind. Is it possible for you to run CF10 from CMD prompt for a time, ColdFusion10\cfusion\bin\cfstart.bat ? Perhaps there is an error and having the details displayed in CMD prompt will lead to solution.
    HTH again, Carl.

  • Oracle 10g HTTP Web Server on Windows 2008 R2 (64-bit) server.

    I downloaded the Oracle 10g HTTP server for Windows 2008 R2 (64-bit) from the link below
    http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html
    10204_vista_w2k8_x64_production_companion.zip (344,455,851 bytes)
    Did anyone have luck installing the 10g HTTP server on a Windows 2008 R2 (64-bit) server ?
    I could see the installation went fine, but I don't see any "Oracle_HTTP" windows service getting created.

    I have not installed on this OS but I'm betting the service is a different name.
    Check "log on as" under services to narrow your search

  • Win64_11gR2  on windows 2008 r2 64 bit

    Hi,
    I'm trying to install oracle database onto a vanilla windows 2008 r2 64 bit machine with windows firewall turned off and no AV installed. The version I have downloaded is labelled win64_11gR2_database_1of2 and 2of2. I have copied the contents of 2of2 into 1of2. As soon as I couble-click (or right click run as administrator) the setup, a cmd window flashes for a split second. I managed to get a screen shot which showed it was trying to launch Oracle Universal Installer from a temp directory in C:\Users\Administrator\AppData\Local\Temp\2\.......
    I have installed the latest version of JRE 64 bit. I also tried installing java to a directory without any spaces and have tried launching the setup from command pointing to the new java install folder.
    I have tried launching the setup from command using the skip system requirements command but no luck there either.
    I have tried running the OUI from within the install directory but it does the same thing.
    I must have read through about 50 pages of forums and none of the solutions have worked.
    Any help would be much appreciated.

    Hi,
    Thanks for the suggestions. My server hardware is more than the minimum requirements. It's not a fancy setup, just a standalone physical box with a blank copy of windows and JRE installed. I can't see any other pre-requisite tasks that would apply. If there is any other software I need to install first, I can't see it on that page. In terms of the log file, I could find a install actions in the C:\Users\Administrator\AppData\Local\Temp\2\...... directory which only gave this info.
    Using paramFile: C:\Install\install\oraparam.ini
    Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
    The number of files bootstrapped for the jre is 0.
    The number of files bootstrapped for the oui is 0.
    Helios - I can't see if that was supposed to be a link. Could you repost it please?
    Thanks

  • Can't install 64-bit DAC on Windows 2008 R2 64-bit

    Hi all,
    When I attempt to run the 64-bit DAC setup.exe installer (either from the root folder or from win64), I get the following:
    Checking swap space: must be greater than 150 MB . Actual 3319 MB Passed
    Checking monitor: must be configured to display at least 256 colors Higher than 256 . Actual 65536 Passed
    Preparing to launch Oracle Universal Installer from D:\temp\OraInstall2011-08-2_03-11-12PM. Please wait ...
    checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
    unable to process jdk//COPYRIGHT.
    checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
    unable to process jdk//LICENSE.
    checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
    unable to process jdk//LICENSE.rtf.
    checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
    unable to process jdk//README.html.
    checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
    unable to process jdk//README_ja.html.
    checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
    unable to process jdk//README_zh_CN.html.
    checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
    unable to process jdk//THIRDPARTYLICENSEREADME.txt.
    I've tried to download the ZIP file a number of times and I've tried this on a number of Windows 2008 R2 64-bit machines, all with the same result. I'm able to run the 32-bit installer without error.
    There's a similar post already on here that suggests using compatibility mode but nothing I've tried has enabled me to install 64-bit DAC on a 64-bit Windows 2008 R2 machine.
    Has anyone successfully achieved this?
    Thanks!
    mroshaw

    Doc Id: ID 849658.1
    Alert : DAC 10.1.3.4.1 64-bit universal installer fails/hangs on Windows 64-bit and Linux 64-bit
    "The issue is 32-bit OUI installer is used for all DAC 10.1.3.4.1 installation which fails during verification/checks on 64-bit machine. It's Installer check which fails, DAC files are fine for 64-bit OS."

  • Oracle 10g 64-bit database on Windows 2008 R2 (64-bit) error ?

    - I have installed Oracle 64-bit database on Windows 2008 R2 (64-bit) server
    - Now everything works fine locally on the database.
    - I had installed Oracle forms/reports 6i which has Oracle SQL Plus 8.0.6.
    on a windows 7 Professional (32-bit) PC. Now when I connect SQLPUS
    from this PC to the windows 2008 R2. It gives me an error
    "Oracle SQL*PLUS has stopped working"
    Problem Event Name:     APPCRASH
    Application Name:     PLUS80.exe
    Application Version:     0.0.0.0
    Application Timestamp:     37f946a5
    Fault Module Name:     ORA805.dll
    Any suggestions or how to connect this 8.0.6 SQL to a Oracle 64-bit database (windows 2008 64-bit )

    - I have installed Oracle 64-bit database on Windows 2008 R2 (64-bit) server
    - Now everything works fine locally on the database.
    - I had installed Oracle forms/reports 6i which has Oracle SQL Plus 8.0.6.
    on a windows 7 Professional (32-bit) PC. Now when I connect SQLPUS
    from this PC to the windows 2008 R2. It gives me an error
    "Oracle SQL*PLUS has stopped working"
    Problem Event Name:     APPCRASH
    Application Name:     PLUS80.exe
    Application Version:     0.0.0.0
    Application Timestamp:     37f946a5
    Fault Module Name:     ORA805.dll
    Any suggestions or how to connect this 8.0.6 SQL to a Oracle 64-bit database (windows 2008 64-bit )

Maybe you are looking for