11g r2 install on windows 2008 r2

I am trying to install Oracle 11g Release 2 Grid on Windows 64 bit... While installing , I am getting the following error ...
Environment variable: "PATH" - This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
Expected Value
* : n/a*
Actual Value
* : n/a*
 This is the value of my "path " variable
 C:\>echo %path%
C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\
 this is the contents of the install log
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:165
WARNING: Result values are not available for this verification task
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Pause Oracle Grid Infrastructure
INFO: Resume Oracle Grid Infrastructure
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -2
INFO: Shutdown Oracle Grid Infrastructure
INFO: Unloading Setup Driver

There seeems to be something wrong with the prerequisite checks on Windows platforms, I faced the result ALL checks didn't pass. If you are sure Oracle 'lies' here you may click on 'Ignore' and then continue.
11gR2 installation problem on Windows XP
Werner

Similar Messages

  • Oracle 11g RAC installation on windows 2008 64 bit

    Hello Everyone,
    can i get some details regarding Oracle 11g RAC installation on windows 2008,
    minimum Hardware Requirement
    Will windows support ASM
    Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
    please send me some docs regarding os requirements, installation and ASM details.
    Thank you

    Hi Everyone,
    I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
    Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
    Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
    The following machine configuration is used for Oracle RAC setup
    Intel Core 2 Duo 2.66 GHz,
    Ram :4GB.
    OS : windows 2008 Server 64 Bit
    Oracle RAC , Clusterware 11g R2 64 Bit.

  • Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.  If possible, Kindly provide me the website link.

    Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
    If possible, Kindly provide me the website link.

    Pl do not post duplicates
    Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
    I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
    Continue the discussions in your original threads

  • How to monitor oracle 11g database sessions on Windows 2008 server?

    Hi Experts
    How to monitor the Oracle 11g database sessions on Windows 2008 server (other than SQL Developer tool), which procedure or query is taking more time with Java application.

    Recently i found this tool- myorasql on the net to monitor the performence of database, easy to setup and check the performence.  i never tested it but seems impresive.  It is free and i think it would be use ful to you.
    http://myorasql.com/
    You can also use Quest - Toad or sqlplus if you are very good at sql commands and all dictionary tables or OEM/EM grid if it is configured .

  • Oracle 11g installation issue on windows 2008 -64 bit

    I have downloaded the Oracle DB Server software from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/111070-win64-2008soft-084715.html:
    Oracle Database 11g Release 1 (11.1.0.7.0)
    for Microsoft Windows Server 2008 x64
    win64_11gR1_database_111070.zip (2,014,141,880 bytes)
    The installer always fails with the following:
    Checking operating system requirements ...
    Expected result: One of 5.0,5.1,5.2,6.0
    Actual Result: 6.1
    Check complete. The overall result of this check is: Failed <<<<
    Problem: Oracle Database 11g is not certified on the current operating system.
    Recommendation: Make sure you are installing the software on the correct platform.
    ========================================================
    Checking service pack requirements ...
    Check complete. The overall result of this check is: Not executed <<<<
    OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
    I am using Windows 2008R2 -64 bit and not Windows Vista. Any idea?

    Hi;
    Oracle Certified versions for 2008R2:
    Oracle 11.2.0.x
    Oracle 10.2.0.5 (See Note 1173433.1 (How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2)
    For Oracle 11gR1:
    For MS Windows 2008, you can select either:
    (11.1.0.7.0)
    Microsoft Windows Server 2008 (32-bit) (1.9 GB)
    Microsoft Windows Server 2008 x64 (1.9 GB)
    For details see:
    Where can I find the Database / Client software to download for Microsoft Vista, or Windows 2008R1? [ID 740926.1]
    Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
    Regard
    Helios

  • BO XI 3.1 SP2 error while installing in Windows 2008 ENT Server 32 Bit

    Hi
    We have  windows 2008 enterprise edition 32 Bit SP2 , While installing  BO 3.1 SP2 we are getting the following error.
    "Some files could not be created.
    Please close all applications, reboot Windows and restart this installation."
    1.we do have enough space as well as we are installing it through administrator account.
    2.I increase the virtual memory size from 2 GB to 4 GB, still same error.
    3.we downloaded the software in two diffrent machines. We tried extracting the "exe" file in two machine but still getting the same error.
    4.We dont have any firewall connected and windows firewall is off.
    Is there BO 3.1 Sp2 is available for windows 2008 ent server 32-Bit?
    Because In the download site there is Windows Server on IA32 32-bit.
    is it the correct version?
    Please help us to solve this problem
    Thanks

    We have opened a ticket for this. After subsequent discussion with the forum support person we have installed BO Enterprise 3.1 SP2 fixed pack 2.5 on the server (Windows Server 2008 SP2). On the client side, we have also installed BO Enterprise 3.1 SP2 fixed pack 2.5 and Live Office SP2 fixed pack 2.5.
    Once we tried to use the Web Intelligence document based on OLAP Universe in excel through Live Office it gives the following error.
    "Failed to get the document information. (LO 26315)  A database error occured. The database error text is: Failed to set properties (The component Microsoft® OLE DB Provider for Analysis Services returned server error (Database 'Sales' does not exist.)). (WIS 10901)(6315)".

  • Windows Installer 4.5 Error while installing in windows 2008 32 bit

    In windows 2008 server (standard edition), i am trying to install the exchange server 2007 sp2 before that i need to install the windows installer 4.5 to install my exchange server 2007sp2, while installing the windows installer 4.5 system showing the error
    message as " Not enough storage is available to process this commend".
    If any one pls give some suggestions as soon as is appreciative.
    [email protected]
    thanks
    Shahul Hameed

    Hi,
    The error message occurs if you are trying to use a private and undocumented SetupAPI function that isn’t supported in Windows Server 2008. Please
    visit the following link for detailed information:
    Misleading error message when you install an update package in Windows
    Vista or in Windows Server 2008: "Not enough storage is available to process this command"
    Please download the right version of Windows Installer 4.5 for Windows Server 2008 x86, you can download it from the following link:
    Windows Installer 4.5
    Best Regards
    Dale
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • "BCP Commit Failed" New Install On Windows 2008 R2 with SQL Server 2008 R2

    I am installing a new Netweaver install on a virtual machine loaded with Windows 2008 R2 and SQL Server 2008 R2. The install gets to the "Import ABAP" phase and just hangs. SAPINST says it is still running, but there is no activity to suggest there is anything going on. There are no errors in the main logs, but after digging a little I did find these errors in the SAPSDIC.log file.
    (IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_CHAR_COND~0'.>
    (IMP) ERROR: EndFastload: rc = 2
    (DB) INFO: BADI_FILTER created
    (DB) INFO: BADI_FILTER~0 created
    (IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_FILTER~0'. Ca>
    (IMP) ERROR: EndFastload: rc = 2
    (DB) INFO: BADI_IMPL created
    (DB) INFO: BADI_IMPL~0 created
    (IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_IMPL~0'. Cann>
    (IMP) ERROR: EndFastload: rc = 2
    Anyone have any ideas as to what might be going on? I can't find anyone with this exact same error. And this is our first attempt at installing a system with Windows 2008 R2 and SQL Server 2008 R2. All of our other Windows SAP systems are on Windows 2003 and SQL Server 2005 and we're in the process of upgrading - this being the first system.
    Thanks in advance,
    Michael

    Set BCP_LOB=1 in your system environment
    Note 1156361 - R3load: Fastload doesn't support LOB-columns
    Markus

  • 11gR2 RAC install on Windows 2008 R2

    I am installing three node rac on windows 2008 and I am successfully able to install Grid Infrastructure with ASM as soon I complete this install server1 disconnect me from remote console and I got blue screen error when I log in back and same error appears on server 3 after few minutes. I bounce all there machines and continue database creation part same problem appears again Need help to understand the problem.
    Do we need to set some kind of registery settings, or any parameter etc.
    Server Configurations.
    All three servers have same configurations.
    Server 1 ,2 ,3
    OS : windows 2008 R2 64 bit
    Processor: Intel(R) xeon(R) CPU E5540 @2.53GHZ (2 processors)
    Memory: 32G
    SAN storage :netapp san
    Error Message:
    Problem signature:
    Problem Event Name:     BlueScreen
    OS Version:     6.1.7600.2.0.0.274.10
    Locale ID:     18441
    Additional information about the problem:
    BCCode:     fffe
    BCP1:     0000000000000000
    BCP2:     0000000000000000
    BCP3:     0000000000000000
    BCP4:     0000000000000000
    OS Version:     6_1_7600
    Service Pack:     0_0
    Product:     274_3
    Files that help describe the problem:
    C:\Windows\Minidump\063010-13868-01.dmp
    C:\Users\svc-btmoraadmin\AppData\Local\Temp\WER-773546-0.sysdata.xml
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt

    In the first place a 'blue screen' has to be analyzed on the OS side, Oracle COULD be the reason, but who knows? More likely a hardware problem (RAM,disk storage). So you have to ask your system administrator and/or call Microsoft support. Or you try to find an answer in one of the many articles in the web, for example this:
    http://www.maximumpc.com/article/features/blue_screen_survival_guide
    Werner

  • Smart View 11.1.1.3.500 Install on Windows 2008 R2 64 Bit SP1

    Wanted to check if any one form user community was able to install Samrtview 11.1.1.3.5 on Windows 2008 R2 64 bit SP1
    Think support matrix says its compatible with windows 2008 64 bit but not R2 - Any round about solutions to get his installed on R2 would help.

    I have tried in Server 2008 R2, i did not face any issues, again i did not use that extensively

  • Oracle 11g R2 Install on Windows 7 64 bit setup.exe does not work.

    Hi
    I am trying to install Oracle 11g R2 on my Windows 7 Ultimate 64 bit. When I execute setup.exe as Administrator the command window flashes and exits. I could not even see what the message is. Also tried command prompt. Can anyone help me resolve this issue?
    Appreciate your support.
    Regards

    user1484609 wrote:
    Installation Successful after executing the install from C:\temp and not within users. Even if you execute as Admin Oracle Install does not have access to the folders in C:\Users...
    Finally the install is successful.Congratulations.
    And thank you for posting your solution. The security issue was quite a surprise to me as well, although it ties into a PC World article I read today.
    To continue, please make sure you have a static IP address. If your system uses DHCP, that may mean setting up Loopback Adapter, configuring a static IP address other than 127.0.0.1 for that (for example you can use 192.168.123.101), and updating C:\windows\system32\drivers\etc\hosts. (note - no 3 char 'type on the hosts file) to include an entry like '192.168.123.101 myhost.example.com myhost', and perhaps setting your ORACLE_HOSTNAME variable. This is all described well in the Install documentaiton at http://download.oracle.com/docs/cd/E11882_01/install.112/e10843/reqs.htm#BABIAEEC

  • CF9 install on Windows 2008 Server R2

    Hi everyone I've installed Cold Fusion 9 on my windows 2008 Server r2 box and everything appears to be configured correctly becuase I can get to the Cold Fusion 9 Administrator page just fine. I've looked within IIS 7.5 and it's recognizing the .cfm file I think becuase it's an option under default documents. However I try to view the file from the local host I get a error 500.0.
      Module
    IsapiModule
      Notification
    ExecuteRequestHandler
      Handler
    AboMapperCustom-77246
      Error Code
    0x800700c1
    I have no idea what that mapper is or what it's supposed to do so if anyone could help me out I would be eternally grateful! Why oh why couldnt cold fusion 9 have native IIS support in it.
    UPDATE
    Apparently this error 500.0 gets applied to all my sites within IIS 7.5. Not just the one I intend to use .cfm files on. When I go into the web configuration tool and remove the configured webservers and restart everything goes back to normal but the .cfm files throw a 404.3 not found error for the following module. 
    Module StaticFileModule
    Notification ExecuteRequestHandler
    Handler StaticFile
    Error Code 0x80070032

    Hi
    Windows Server Core edition is not listed as supported platform:
    http://www.adobe.com/products/coldfusion/systemreqs/
    HTH, Carl.

  • Oracle 10g instalation on windows 2008 64 bit getting error

    Hi,
    I am trying to install Oracle 10g database(10204_vista_w2k8_x64_production_db) ON windows 2008 release 2 sevice pack1. i am getting following errors.
    please give me solution how to install.
    Checking operating system requirements ...
    Expected result: One of 5.0,5.1,5.2,6.0
    Actual Result: 6.1
    Check complete. The overall result of this check is: Failed <<<<
    Problem: Oracle Database 10g is not certified on the current operating system.
    Recommendation: Make sure you are installing the software on the correct platform.
    =======================================================================
    Checking service pack requirements ...
    Check complete. The overall result of this check is: Not executed <<<<
    OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
    Recommendation: Install the recommended Service Pack.
    =======================================================================
    Checking physical memory requirements ...
    Expected result: 256MB
    Actual Result: 3956MB
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Network Configuration requirements ...
    Actual Result: :Native Library C:\Users\Administrator\AppData\Local\Temp\1\OraInstall2011-06-21_11-06-53AM\bin\win64\DHCPPrereq.dll already loaded in another classloader
    Check complete. The overall result of this check is: Not executed <<<<
    Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
    =======================================================================
    Checking the length of PATH environment variable...
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Validating ORACLE_BASE location (if set) ...
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Oracle Home path for spaces...
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Oracle Home path for location ...
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking for proper system clean-up....
    Actual Result: :java.lang.UnsatisfiedLinkError:Native Library C:\Users\Administrator\AppData\Local\Temp\1\OraInstall2011-06-21_11-06-53AM\bin\win64\sidqueries.dll already loaded in another classloader
    Check complete. The overall result of this check is: Not executed <<<<
    Recommendation: You must completely remove the ASM instance by removing the ASM service from the Service Control Manager, or you must configure it properly by ensuring that the ASM service is associated with a valid Oracle Home where ASM is configured.
    =======================================================================
    Checking for Oracle Home incompatibilities ....
    Actual Result: NEW_HOME
    Check complete. The overall result of this check is: Passed
    =======================================================================

    10..2.0.4 not certified for Windows Server 2008 64bit, If you want install this software , you need to apply patch 10.2.0.5 patch
    10.2.0.4 is on certified for windows Server 2008 32bit (x86), so you can install the software without apply patch but If you want to install windows 7 , you need to apply patch.
    Read 4th steps
    http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html

  • Install Error Windows 2008 R2

    The installation of FMS 3.5.1 r516 Development fatally failed on our Windows 2008 R2 Server. We tried an R1 server and that one installed with no issues.
    It gets past the MS C++ installer, then shortly after:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    FMSMaster.exe
      Application Version:    3.5.1.516
      Application Timestamp:    498a2199
      Fault Module Name:    KERNELBASE.dll
      Fault Module Version:    6.1.7600.16385
      Fault Module Timestamp:    4a5be02a
      Exception Code:    80000003
      Exception Offset:    00014159
      OS Version:    6.1.7600.2.0.0.272.7
      Locale ID:    1033
      Additional Information 1:    4c0d
      Additional Information 2:    4c0d4d78887f76d971d5d00f1f20a433
      Additional Information 3:    4c0d
      Additional Information 4:    4c0d4d78887f76d971d5d00f1f20a433
    We'd like to put this in production on all of our R2 servers... but certainly we can't at this point.
    Mike Wilcox

    Hi,
    FMS 3.5.1 supports Windows 2008 R2.
    Regarding the error message that you get it can also be caused due to some files getting corrupt in Windows registry.
    The corruption in registry can occur due to several reasons such as existense of invalid entries caused due to software you are no longer using, or an improper software installation or removal.
    You can try the installation on another machine with a fresh installation of Windows 2008 or re-install the OS if possible. You can also try some registry repair tool in case you don't wish to re-install the OS.
    Look into windows 2008 support forums for more information on this error message.
    Thanks,
    Abhishek

  • New install on Window 2008 or 2008 R2 ?

    Hello all,
    I will install soon 3 SAP products : SAP Solution manager 7 ehp1, SAP ERP6 SR3 and the Content Serveur 6.40.
    I wanted to know if the situation about window 2008 R2 has change ?
    I have read SAp note 1383873 and i have look in the PAM and that i have understand is AS and DB oracle 10.2 are supported on window 2008 R2.
    Is there someone who can clarify this point.
    Thx for help
    Regards

    Thx for your reply.
    Yes you right about the interpretation of the SAP note.
    On the PAM file, effectively there is no dedicated column for window 2008 R2 but in the page N°5 we can read : (*2)Including Windows Server 2008 R2 (Planned for Q3 2010)
    So we have the Box ( oracle 20.2 / window 2008 ) in Green ( means AS & DB supported )...and on other side we have  (Planned for Q3 2010).... =) what to conclude? not yet suported i suppose someone can confirm?
    Edited by: BABY Fabrice on Sep 26, 2010 10:46 AM
    Edited by: BABY Fabrice on Sep 26, 2010 11:50 AM
    Edited by: BABY Fabrice on Sep 26, 2010 11:51 AM
    Edited by: BABY Fabrice on Sep 26, 2010 9:26 PM

Maybe you are looking for