11gR1 : ADS Support for ADF BC

Hi All ,
Bumped on a few old posts by Jan and found that there is a documentation bug in Oracle Documentation and Oracle doesnot yet support ADF BC with ADS.
See Frank’s comments in this post :
https://forums.oracle.com/thread/2199726
Also , in the same post Frank mentions that below example is the best way if you need to do it using ADF BC :
Example 156  here : https://blogs.oracle.com/smuenchadf/resource/examples (I now remember myself and Amulya trying it and it works though not sure if it’s ok to use a shared AM as a practice).
Also there is another post which describes the same:
https://forums.oracle.com/thread/1030213
These posts are a few years old , so wanted to confirm that the part about Oracle not having support yet for ADS when using ADF BC still holds true.
Can someone please confirm specifically part below -
Frank Nimphius wrote:
... Again, using ADS with ADF BC exposed through the ADF binding layer is not yet supported to work other than what is documented on Steve Muench's website: http://blogs.oracle.com/smuenchadf/examples/ --> sample 156
When you use ADS, then you actually wrap the component binding class. When a push is sent from the server to the client then this does not go through the binding filter (as it is not a client request), which means the FacesContext and the BindingContext (as far as my testings go) are not available. So unlike you hook up ADF BC directly to ADF Faces with using ADS, I suggest you go for sample 156. Note that we are aware of this requirement and there is work done on providing this feature out-of-the box for ADF BC. However, this does not have a release date yet and in fact hasn't left the stage of prototyping.
Frank

Hi  Frank ,
Yes there was a question within the above post -
These posts are a few years old , so wanted to confirm that the part about Oracle not having support yet for ADS when using ADF BC still holds true.
Can someone please confirm specifically part in italics in above post .
Thanks
Sudipto

Similar Messages

  • Can anybody explain what is support for ADF Project and to solve the Issues

    Hi,
    I am new to ADF and i am currently associated to ADF Support Project.
    Can anybody explain what is support for ADF Project and to solve the Issues when the ADF Project is in Live.
    we are getting the Tickets for the Issues.
    Thanks in advance.

    I agree with Timo.
    It depends on the size of the project, user base, technologies, etc. We use lot of technologies in fusion middleware stack. We get tickets in many areas.
    In your case, it could be anything like user training issues (user may not know how to use the some system features), browser issues like blank screen, bugs in code like JBO errors (failed to validate, another user has changed row, failed to lock the record, NullPointerException, IllegalArgumentException etc), business logic issues, page may not render properly, performance issues, partial commit issues, application server issues, authentication issues. If you use web services you might get web services related problems.

  • How to create support for ADF unsupported locale?

    Hi,
    I am working with JDeveloper 11g tp4 and I would like to add support for fo locale (which I've seen that is currently unsupported in adf). I've written a MessageBundle_fo class in oracle.adf.view.faces.resource package extending java.util.ListResourceBundle but seems not enough (In a jspx page I have a form with a number inputText; when run, only the loading image is shown and no message is displayed on server log.. changing the locale in faces-config.xml to one of the supporting locales, works just fine).
    Any guideline is welcome.
    Anca

    Hi,
    Thanks for your reply.
    I have downloaded the workspace containing the sample application from the address you provided. I have done the following changes to the application:
    1. Created AdcsResourceBundle_fo.java in the same package as AdcsResourceBundle.java
    2. Configured locale in faces-config.xml
    <locale-config>
          <default-locale>fo</default-locale>
          <supported-locale>fo</supported-locale>
        </locale-config>Indeed the messages are taken from AdcsResourceBundle_fo.java (I've tested the PanelCollection), but the problem with the number inputText is still there.
    Test scenario:
    Drag and drop DepartmentsView1 from Data Control to showDetailItem 1 in Table.jspx -> Create -> Forms -> ADF Form
    When the page is run, the 'Splash' image and 'Loading..' remains on the browser window and nothing else happens. And again, no messages in the server log.
    Is there anything else that needs to be configured?
    Anca

  • Support for ADF Faces

    Hi Everyone,
    We are planing to use ADF Facses for our upcoming prjoject. so for that we want some sample application or demonstration because the list of component is available in the oracle site is not very rich may be not updated, how can i get detail information about ADF Faces.
    How to get latest trial version of ADF Faces and how to configure ADF with MYEclipse
    Thanks
    Meraj

    Meraj,
    ADF Faces components are as they show in the JDeveloper 10.1.3.3 component palette. The Apache MyFaces open source project Trinidad contains new components that will be in JDeveloper 11. Note that unlike other vendors, Oracle doesn't make trial versions available but always the full version (we don't mind developers using our stack for longer than 30 days ;-) ).
    To configure ADF Faces in Eclipse, just make sure you have MyFaces or JSF-RI installed in Eclipse and adf-faces-api.jar and adf-faces-impl.jar configured for ADF face. The adf-faces-impl.jar fiel contains the tag libraries
    Frank

  • Webcenter Portal Support for ADF Mobile Browser

    Hi All,
    I am currently working on an ADF Mobile Browser Application for WebCenter Portal.
    The main issue I face is that WebCenter has some really powerful taskflows and connectors. Is it possible for us to make use of these taskflows in ADF mobile browser? It seems that when used within the trinidad framework, the taskflows are broken.
    I understand from documentation that "Except for page fragments, pop-up in dialogs, and region support, you can use the ADF task flow to develop ADF Mobile browser applications. ADF Mobile browser application that use the ADF task flow only support the trinidad-simple skin family"
    Does this mean that taskflows that use the page fragments, pop up dialogs dont work or that you cant use them within jsff and pop ups?
    Sincerely appreciate any help! thanks

    Hi,
    You can reuse taskflows but you need to modify jsff pages with trinidad components.
    Thanks,
    Minal

  • RMS Client support for ADFS 3 with MFA

    We are using Azure RMS. The Users are synchronized from on-premise AD onto Azure AD. If we configure the Relying Party Trust for Azure RMS authentication with MFA (Multi-Factor-Authentication like SMS, OneTimeToken...), the User couldn't login from a Windows
    Client with the RMS Client installed.
    The reason is, that RMS Client only ask for username and password. A another box for OTP, SMS Code and so on doesn't appears.
    Because the login into Azure RMS to get access to protected documents is very sensitive, it should be able to using MFA with the RMS Client.
    Are there a timeline to implement MFA support in the RMS Client (e.q. for Windows)?
    Thanks for your help.

    Office apps have historically required app passwords since they didn't support MFA. Newer Office apps are now using modern authentication that allow sign-in through ADFS and/or Azure AD. If MFA is enabled in Azure AD for federated accounts, the primary
    authentication should be done by ADFS, after which Azure AD will perform the MFA. The new Android apps came out later than the new iOS apps. There is a blog post put out by the Office team with details on the modern auth for their apps at
    http://aka.ms/officemodernauth.

  • SQL 2012 support for ADFS 2.0

    We recently upgraded to SQL 2012 Enterprise from SQL 2008. Since that happened we are now seeing errors when trying to create Relying Party Trusts in our ADFS 2.0 environment.
    The error is as follows:
    An error occurred during an attempt to access the AD FS configuration database. Error message: Exception of type 'Microsoft.IdentityServer.PolicyModel.Client.StorageOperationException' was thrown.
    That brings 3 specific questions:
    1. Does ADFS 2.0 support SQL 2012 as a backend?
    2. Can we move the AD FS configuration database back to WID?
    3. If the answer to question 2 is yes, how do I do it?
    Thanks in advance for any help or suggestions.
    Just a Network Administrator in a Developers World

    Hi Boomer,
    There is no official document published about incompatibilities between AD FS 2.0 and SQL 2012. Though many people have issues about this combination, please see this thread below:
    ADFS 2.0 + SQL 2012
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/6842274e-dca6-423d-9ddb-f5949fa83076/adfs-20-sql-2012?forum=Geneva
    In the meantime, SQL Server 2012 is supported with AD FS 2.1 for sure, you can try to upgrade AD FS 2.0 to AD FS 2.1 if the issue persists.
    In addition, I couldn’t find any resource about migrating AD FS configuration database from SQL to WID, only the other way around.
    More information for you:
    Federation Server Farm Using SQL Server
    http://technet.microsoft.com/en-us/library/gg982487.aspx
    FAQ on ADFS - Part 1
    http://blogs.technet.com/b/askpfeplat/archive/2013/07/22/faq-on-adfs-part-1.aspx
    Best Regards,
    Amy

  • OEPE support for ADF 11.1.2.x (11g R2)

    Hi there,
    Are there any plans to release a (preview) version of OEPE that supports ADF 11.1.2.x (i.e. ADF with JSF 2.0 / facelets)?
    Thanks,
    Murray
    Edited by: 974848 on Dec 4, 2012 2:56 AM

    In ADF 12c there would be conversion from JSPX to Facelets. Hence, you could create JSPX-based templates today in OEPE and they would be migrated to facelets in the moment we support ADF 12 in OEPE.
    Nonetheless, to set up the right expectations: ADF Faces templates will work on facelets which does not imply ADF Faces template = Facelets Templates. As you might now we provide templating capabilities since the first release of ADF 11g. Are you looking into specific features of Facelets templating? perhaps I can validate internally if we cover them on our side on the ADF Faces templating.
    By the way are you currenly using OEPE with ADF?
    - Juan Camilo
    Edited by: Juan Camilo Ruiz on Dec 13, 2012 2:18 PM

  • Ipad support for ADF

    Guys,
    I'm running an adf project locally from Jdeveloper in 11.1.1.6.
    I replaced 127.0.0.1 with the ip address of the machine and tried running from IPAD (which is connected through LAN).
    Though am able to access the application from IPAD, the menu's and button's are not responding.
    I think the touches are not recognized properly. But if i deploy the project to our development server, its working perfectly.
    My question is 'when we run the project from jdeveloper, (and try to access from ipad) why the application is not working properly from touch devices ?'

    Do you by chance have '.jspx' at three end of the url you call to access the application?
    If yes you should remove it as this would just open the page but don't start the task flow. This would show effect you describe.
    Timo

  • AXAJ: support for old versions of browsers?

    Technilac preview version supports IE7, FireFox2 only.
    Are there plans for supporting old versions in future?

    IE 6.x support for ADF faces rich-client components..
    (there is no plan yet to support IE 6)

  • Future support for using PL/SQL core business logic with ADF BC

    We want to migrate our large Forms client/server (6i) application to ADF, possibly using a migration tool like Ciphersoft Exodus.
    One scenario could be to use ADF BC and ADF-Faces or a different JSF-Implementation for presentation and business layer but keep our heavy PL/SQL-businesslogic inside the Oracle database in packages, triggers, functions and procedures.
    This scenario could be chosen due to the huge amount of interconnected logic inside the database (10 years of development; no technical components; any package may access any table and more of this kind of dependencies). The business logic nowadays held in Forms client will be moved mainly into the database as a prerequisite to this scenario.
    Choosing this "keep-logic-in-DB"-scenario we need a good support by ADF BC to do so. We know and prototyped that it is possible to call some PL/SQL via JDBC from ADF BC and it is possible to use stored procedure calls for standard business entity data access (ins, del, upd, ..). But this does not solve our problems. We want to reuse core business logic coded in PL/SQL. This is much more than change the ADF standard behavior for an update with an own PL/SQL-call.
    Now my question:
    Will there be a kind of sophisticated support to use ADF BC in combination with database-kept logic?
    If so, when will this happen and how will the common problems of transactional state inside the database and inside the ADF BC be solved? Any plans or ideas yet?
    Many other clients do have similar applications built in Forms and PL/SQL and would be glad to hear about a path of direction.
    I've read the technical article 'understanding the ADF BC state management feature' which you have contributed to. One current limitation is pointed out there: Using PL/SQL with ADF BC limits ADF AM pooling to 'restricted level' which reduces scalability.
    Are you aware of additional main problems/tasks to solve when using PL/SQL heavily with ADF BC, which we have to think about?
    Thank you for any response.
    Ingmar

    My main problem is two 'concurrent' areas holding state in an application system based on DB-stored PL/SQL-logic in combination with ADF BC.
    For a new System everything can be made ok:
    Sure, it is possible to build a new system with the business logic included in ADF BC only. All long-living state will be handled in the BC layer ( including support for UnitsOfWork longer than the webside short HTTP-requests and HTTP-sessions and longer than the database transactions.
    For an old system these problems arise:
    1. DB data changes not reflected in BC layer:
    Our PL/SQL-logic changes data in tables without notifying the ADF BC layer (and its cache). To keep the data in ADF BC entity objects identical to the changed database content a synchronization is needed. BC does not know which part of the application data has been changed because it has not initiated the changes through its entity objects. Therefore a full refresh is needed. In a Forms4GL environment the behavior is similar: We do frequently requeries of all relevant (base)tables after calling database stored logic to be sure to get the changed data to display and to operate on it.
    -> Reengineering of the PL/SQL-logic to make the ADF BC layer aware of the changes is a big effort (notifying BC about any change)
    2. longer living database transactions
    Our PL/SQL-logic in some areas makes use of lengthy database transactions. The technical DB-transaction is similar to the UnitOfWork. If we call this existing logic from ADF BC, database state is produced which will not be DB-committed in the same cycle.
    This reduces scalability of ADF BC AM pooling.
    Example:
    a) Call a DB-stored logic to check if some business data is consistent and prepare some data for versioning. This starts a DB-transaction but does not commit it.
    b) Control is handed back to the user interface. Successful result of step a) is displayed
    c) User now executes the versioning operation
    d) Call another DB-stored logic to execute the versioning. DB-transaction is still open
    e) Business layer commits the transaction automatically after successful finishing step d). Otherwise everything from a) to e) is rolled back.
    -> redesign of this behavior (= cutting the 1to1 relation between LogicalUnitOfWork and the technicalDatabaseTransaction is a big effort due to the big amount of code.

  • Support of ADF 11gR2 for Internet Explorer 10

    Following this link:http://www.oracle.com/technetwork/developer-tools/jdev/jdev11gr2-cert-405181.html there currently is no certification of Internet Explorer 10 for ADF 11.1.2.3.0.
    Are there any plans to certify Internet Explorer 10 in the near future?
    In general it seems to work but there are a few glitches in the UI.
    Thankyou

    hi Shay
    pieterv wrote:
    ... no certification of Internet Explorer 10 for ADF 11.1.2.3.0. ...
    Shay Shmeltzer wrote:We are planning to add support for IE 10 in upcoming releases. ...
    Shay Shmeltzer wrote:By the way try out the 11.1.1.7 components demo on IE 10 - it has a bunch of fixes in it so you might find that your problems have been addressed. ...So, what do fixes in the currently most recent JDeveloper 11g R1 release (11.1.1.7.0) imply about upcoming releases of JDeveloper 11g R2 ? How are these related?
    many thanks
    Jan Vervecken

  • 11g TP3 / ADF BC / Support for database type in column

    Is it necessary to instantiate an object of corresponding type in the row implementation class to manage the corresponding type attributes like in 10g ?
    Example from 10g :
    protected void create(AttributeList attributeList)
    super.create(attributeList);
    ApplicationModule root = getDBTransaction().getRootApplicationModule();
    DBSequence seqid = new DBSequence("customers_seq",root);
    setCustomerId(seqid.getSequenceNumber());
    try
    CustAddressTyp custAddr = new CustAddressTyp();
    this.setCustAddress(custAddr);
    catch (Exception e)
    e.printStackTrace();
    }

    We currently don't offer support for Oracle ADF BC in Eclipse and while we might consider this for a future release this is not planned right now.

  • Oracle adf  supported for json applications

    Hi can u any one help to me
    Oracle adf supported for json

    Hi,
    create a Jersey client and generate a JavaBean data control. This is how you get JSON clients integrated assuming the JSON client is a REST service.
    Frank

  • ADF Mobile: JSON support for REST services?

    Will the JSON format be supported for REST services using ADF Mobile? Is there a workaround for now that can be used?

    For now you can write a Java class to communicate with your JSON service, and expose it as a data control.

Maybe you are looking for

  • How to Increase the 15 Minute Idle Timeout?

    I saw some similar posts to increasing the EM timeout, but they didn't seem to relate to the idle timeout period. I need to increase the idle timeout from 15 minutes to something more like 30 minutes. A lot of times, I'll be editing a package with 10

  • HT1338 How do I run a preupgrade script for Apple Mobile Device for itunes?

    My computer says that I have an update available but so far into trying to install it tells me the upgrade script is wrong.  Am I able to take care of this by myself or do I need to take it to a store?

  • The server (UCM server name) at IDC Security /oracleUCM/idcplg requires a username and passowrd.

    Hi , I am getting the prompt asking for username and passoword whenever trying to login to UCM. Please find the details as given below. I am using UCM 10gR3 with Apache server and database is oracle 11g. The server at IDC Security /oracleUCM/idcplg r

  • Month end/yr end activities

    Hi What are the various month end and yr end activities as far SD module is concerned. regds Pamela

  • Motion Template

    I'm having problems with Motion Template in Final Cut. I've recently changed computers and have discovered that I can't open up Motion Templates in my viewer. It appears as a black screen. I edited the original program using a Mac Book Pro, Motion te