11gr2 install on linux 64

Hi
Just looking for confirmation. Should both of these installs be done as the oracle user or should the oragrid user be used to install the grid home binaries?
Install oracle RDBMS home (version 11.2.0.2)
Install oracle grid home (version 11.2.0.2)
Regards
CR

Hi;
Just looking for confirmation. Should both of these installs be done as the oracle user or should the oragrid user be used to install the grid home binaries?
Install oracle RDBMS home (version 11.2.0.2)
Install oracle grid home (version 11.2.0.2)Recomended is to create different home wiht different user for RDBMS home and grid home, you can find details on installation guide. For me i use same user other way if you have more than 500+ db to be try to support and manage its become headache to try to get username and their pass
Regard
Helios

Similar Messages

Forms 11gR2 installed on linux (centos 6.3) cannot start

hello ervery one,
I installed weblogic 10.3.5 and jdk first ,and then installed forms11gR2 on my linux virtual machine.
I can not start up my forms builder .
it report an error: cannot find libjvm.so :cannot open shared object file ,no such file or directory.
the weblogic server can start normally.
what may be the reason and how can i fix it ?
lmw.

CentOS is not a supported operating system for 11g Forms/Reports - thus if you run into a brickwall on this, don't be surprised :)
Despite it not being supported, I have ran Forms Builder in an unsupported linux environment before. You likely just need to setup missing environment variables to get it to run, make sure the environment variables listed below are set. I'd probably do this in a little shell script to launch forms builder. However just a fair warning, the user interface isnt pretty when you run it on UNIX-based systems.
#MW_HOME: WebLogic Middleware home directory
export MW_HOME=/opt/oracle/middleware
#ORACLE_INSTANCE: Oracle Instance of your Forms/Reports Domain
export ORACLE_INSTANCE=$MW_HOME/asinst_1
#ORACLE_HOME: Oracle Home of Forms and Reports
export ORACLE_HOME=$MW_HOME/as_1
export FORMS=$ORACLE_HOME/forms
export FORMS_BUILDER_CLASSPATH=$ORACLE_HOME/jlib/frmbld.jar:$ORACLE_HOME/jlib/importer.jar:$ORACLE_HOME/jlib/debugger.jar:$ORACLE_HOME/jlib/utj.jar:$ORACLE_HOME/jlib/ewt3.jar:$ORACLE_HOME/jlib/share.jar:$ORACLE_HOME/jlib/dfc.jar:$ORACLE_HOME/jlib/ohj.jar:$ORACLE_HOME/jlib/help-share.jar:$ORACLE_HOME/jlib/oracle_ice.jar:$ORACLE_HOME/jlib/jewt4.jar:$ORACLE_HOME/forms/java/frmwebutil.jar:$ORACLE_HOME/forms/java/frmall.jar
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/jdk/jre/lib/amd64:$ORACLE_HOME/jdk/jre/lib/amd64/server:$ORACLE_HOME/jdk/jre/lib/amd64/native_threads
export LD_PRELOAD=$ORACLE_HOME/jdk/jre/lib/amd64/libjsig.so
#PATH: Make sure to include OS User bin paths
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/jdk/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin
#TNS_ADMIN: Default TNS_ADMIN for 11g Forms and Reports
export TNS_ADMIN=$ORACLE_INSTANCE/config
Thanks,
Gavin

Installing 11gr2 in Oracle Linux 6.3 (./runInstaller - permission denied)

Whenever i try to run ./runInstaller in terminal,
i get the error as Permission denied ,
While installing oracle linux 6.3 , i have given root password and in terminal ,
even though being a root user, can't install the Oracle Database 11gr2.
I know, there are many tutorials about installing 11gr2, i followed almost all from different sites, but stuck with Permission denied.
Pls help me anyone, as am a beginner in the field of Linux environment.
Thanks...
Edited by: flixblixclix on Jan 1, 2013 10:51 PM

979352 wrote:
Whenever i try to run ./runInstaller in terminal,
i get the error as Permission denied ,
While installing oracle linux 6.3 , i have given root password and in terminal , trying to install as root is a clear indication that you either haven't read the Installation Guide, or you are choosing to ignore it. If you missed or chose to ignore the point that the installation should not be done as root, who knows what else you missed or chose to ignore.
From Oracle® Database Installation Guide
11g Release 2 (11.2) for Linux ( http://docs.oracle.com/cd/E11882_01/install.112/e24321/inst_task.htm#BABJGGJH)
4.5.1 Running Oracle Universal Installer
For any type of installation process, start Oracle Universal Installer and install the software, as follows:
Logon as the Oracle software owner user (typically, oracle) to the computer on which you want to install Oracle components.
even though being a root user, can't install the Oracle Database 11gr2.
I know, there are many tutorials about installing 11gr2, i followed almost all from different sites, but stuck with Permission denied.
Pls help me anyone, as am a beginner in the field of Linux environment. Read the Installation Guide. Read all of it. Believe it.
>
Thanks...Edited by: EdStevens on Jan 1, 2013 8:24 AM

Missing packages while installing 11gr2 on oracle linux 6 os

hi,
i am installing Oracle 11gR2 on oracle Linux 6 OS via a vmware.
i bum into this problem of not able to install the required packages:
glibc-2.3.4-2.41
compat-libstdc++-33-3.2.3 (64bit)
elfutils-libelf-devel-0.97
libaio-devel-0.3.105
libgcc-3.4.6
libstdc++-3.4.6
unixODBC-2.2.11 (64bit)
unixODBC-deve-2.2.11
pdksh-5.2.14
i try to rpm -qa | grep <packges name>
[root@rcat lib64]# rpm -qa | grep glibc
glibc-devel-2.12-1.132.el6.x86_64
glibc-common-2.12-1.132.el6.x86_64
glibc-2.12-1.132.el6.x86_64
glibc-headers-2.12-1.132.el6.x86_64
[root@rcat lib64]# rpm -qa | grep libaio
libaio-0.3.107-10.el6.x86_64
libaio-devel-0.3.107-10.el6.i686
libaio-devel-0.3.107-10.el6.x86_64
[root@rcat lib64]# rpm -qa | grep compat-libstdc++
[root@rcat lib64]# rpm -qa | grep elfutils
elfutils-libs-0.152-1.el6.x86_64
elfutils-0.152-1.el6.x86_64
elfutils-libelf-0.152-1.el6.x86_64
[root@rcat lib64]# rpm -qa | grep libaio-devel
libaio-devel-0.3.107-10.el6.i686
libaio-devel-0.3.107-10.el6.x86_64
[root@rcat lib64]# rpm -qa | grep libgcc
libgcc-4.4.7-4.el6.x86_64
[root@rcat lib64]# rpm -qa | grep libstdc
libstdc++-4.4.7-4.el6.x86_64
libstdc++-devel-4.4.7-4.el6.x86_64
[root@rcat lib64]# rpm -qa | grep unixODBC
[root@rcat lib64]# rpm -qa | grep pdksh
it seem like the packages i have on my oracle linux 6 os is of higher version compared to what oracle 11gR2 database installer is asking for which is of lower version.
i can't seem to find/download those packages individually from any website.
I am trying to download the oracle linux 5 os iso with the hope i can find the lower version packages from the iso disc.
Appreciate if there is any help here. pointing to any website i can quickly download the packages cos trying to download the iso takes me more then 13 hour!.

>>it seem like the packages i have on my oracle linux 6 os is of higher version compared to what oracle 11gR2 database installer is asking for which is of lower version.
i can't seem to find/download those packages individually from any website.
I am trying to download the oracle linux 5 os iso with the hope i can find the lower version packages from the iso disc.
You should find all rpms and their right version (as required by installer) onto linux 6 iso.
For some rpms the installer can like higher versions but not for all. For some rpms installer requires the exact version.
HTH
Pradeep

Oracle 11gR2 on Oracle Linux 6 64 bit

Hi all,
I am a newbie on oracle so i posted this thread because i needed some help installing oracle 11gR2 on Oracle Linux using command line
This is for testing purposes.
I did all the prerequisites by oracle for the operating system.
I finished installing the database software from the setup ./runinstaller using x-terminal
I think i configured well the listener, because i can access the database using simple with pl/sql
The problem i have is with the dbconsole wich is accessed from the browser. I can't open it. from google chrome is says : This webpage is not available
Any help would be appreciated
Sorry for my english
It's not my native language
Be kind to check my site:
http://lajm-shqip.com/

Pl identify exact version of "11gR2"
Currently only 11.2.0.3 is certified to be installed on Linux 6 - http://docs.oracle.com/cd/E11882_01/relnotes.112/e23558/toc.htm#CHDFHIEA
If you are installing 11.2.0.1 or 11.2.0.2, you will need to use Linux 5.x
Has database control been configured ?
HTH
Srini

Oracle 11gR2 RAC on Linux 5

Hi,
I am trying to setup Oracle 11gR2 RAC on Linux 5.4 64-bit machine. I have used OCFS2 for creating shared disks. Encountered with the following error message while installing "Grid Infrastructure".
[INS-30014] Unable to check wether the location specified is on CFS
[INS-40103] The installer has detected that the software location specified is on an OCFS2 partition.
[IS-41312] One or more locations specified for Oracle cluster Regestry (OCR) cannot be used.
[INS-41514] One or more locations specified for placing voting disks cannot be used.
-- At the time of configuration i have created 2 share disks, 1) For Oracle software 2) For voting disk and OCR
Provided the same details at time of Clusterware installation.
Please hel me.
Thanks,

Actually for both Oracle software and OCR i have used OCFS2. bcz earlier in Oracle 11g1 RAC i did the same and able to do smooth installation Well, you can no more do that with 11gR2 and it's clearly mentioned in 11gR2 Error messages documentation that configuration of grid Infrastructure software for a cluster is not supported on OCFS2 partition. You'll need to specify a location that is not an OCFS2 partition.
Search for the error INS-40103 message at http://download.oracle.com/docs/cd/E11882_01/server.112/e10880/giinstaller_errormessages.htm
Cheers.

Uninstall of oracle 11gR2 RAC on linux

Hi all,
i am in learning stage, can anybody help me how to uninstall the Oracle 11gR2 RAC on linux.
thank you.

http://gruffdba.wordpress.com/2012/10/29/oracle-11gr2-rac-install-cleaning-up-a-failed-install-on-linux/
you can go through this link you will get an idea

Oracle 11gR2 RAC on Linux

Can we install Oracle 11gR2 RAC on Linux using OCFS2 for both Oracle software and OCR.
Actually i am facing problems with Oracle software location which is on OCFS2
Please help me

Though it would be technically feasible, oracle recommends against sharing oracle binaries for RAC.
You would be better off installing oracle binaries on a local mount on all nodes rather than a shared file system.
Cheers.

Is it possible to Install Oracle Linux 6.2 64-bit in Itanium Server?

Hi Gurus,
I have 2 intel Itenium servers of same configuration. I like to install Oracle Linux 6.2 64-bit in both Itanium Servers and Install Oracle 11gr2 RAC there. I have installed OEL 6.2 64-bit in x86-64 architecture server and installed Oracle 11gr2 there, but never done that in Itenium servers. Now I am confused if it is possible. To know the answer is very important for me and earlier the better.
Regards
Hasan Al Mamun
Systems Analyst
Bangladesh Bank
Dhaka, Bangladesh.

HasanAlMamun wrote:
I have 2 intel Itenium servers of same configuration. I like to install Oracle Linux 6.2 64-bit in both Itanium Servers and Install Oracle 11gr2 RAC there. I have installed OEL 6.2 64-bit in x86-64 architecture server and installed Oracle 11gr2 there, but never done that in Itenium servers. Now I am confused if it is possible. To know the answer is very important for me and earlier the better.It's not possible. We do not provide Oracle Linux 6 for Itanium.

How to install redhat linux on my macbook pro marvericks osx as a dual boot

how to install redhat linux on my mac as a dual boot

I can use disk0s4 to install linux. I have already partitioned it for the vmware.

OBIEE 11g installing in Linux. domain creation error

Hi,
OBIEE 11g installing in Linux server now. domain creation is in progress for about an hour and in log I can see below error.
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
domain creation is still running and looks like it is struck to start domain no idea how to solve the issue. waiting to see whether domain creation successful.
Please let me know how to fix this issue.
Thanks
Jay.

Hi,
Have you try to increase MaxPermSize, it may occure memory issue.
change the Middleware/ORACLE_BI1/oui/oraparam.ini and fine it like below
JRE_MEMORY_OPTIONS=" -mx512m -XX:MaxPermSize=512m" then try to change it
JRE_MEMORY_OPTIONS=" -mx2048m -XX:MaxPermSize=2048m"
(i.e:It will increase the numbers for allocating more memory) then save it and then try to run config.bat (software only/enterprise) method and configure it.
Thanks
Deva

Odbc driver error while OBIEE instal on LINUX tries to access Datawarehouse

Hi All,
I have installed OBI Apps on a LINUX machine.The ETL too ran successfully.As we can't install BI tool on LINUX I modified the OracleBIAnalyticsApps.rpd file on a Windows machine and copied it back to the LINUX machine.After modifying the NSQConfig.ini file I could see all the OBI Apps answers and Dashboards ie OBI Apps was installed on LINUX.But whwnever I try to access some data from OLAP i get the following error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16023] The ODBC function has returned an error. The database may not be available, or the network may be down. (HY000)
SQL Issued: SELECT Time."Year" FROM "Human Resources - Workforce Profile" ORDER BY 1
Probably this is because all the DSN specified in the rpd file were present on the Windows machine.I don't know how to modify these values for LINUX.Please help.Nothing is mentioned in the install docc as far as LINUX installation is concerned.
regards,
Soumya.

I think when your BI Server is running on linux, you would use native drivers to connect to your data warehouse database and not ODBC. If your data warehouse is on a oracle db server, change the call interfact in the RPD connection pool to OCI and give the tnsname for the db server connection in the connection pool.

Can OAS9i and Portal be installed on Linux RedHat(kernel 2.2.19) platform?

Hi,
My question is the same as the subject written.
Can OAS9i and Portal be installed on Linux RedHat(kernel 2.2.19) platform? Basically, first, I can't find the OAS9i "*.cp" image files for RedHat Kernel 2.2.16 or later use, second, what I can download from OTN site is V1.0.2.2.1 which is for Linux RedHat Kernel 2.4.3-12 or later use. And I downloaded all the files which OAS9i version is V1.0.2.2.1, and failed to install on my platform. So I want to know is there anybody installing OAS9i and Portal successfully on RedHat 6.2(Kernel 2.2.19, glibc 2.1.3)? Or can share on other RedHat version had any successful installation processes or suggestion. Thanks in advance.
Regards!
Frank

9iAS 1.0.2.x is only supported on Redhat 7.0 and Suse 7.2
Portal PM

We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode

We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode

1344675 wrote:
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode
Why is your "requirement" to install in graphical mode? Once you are past the installation itself, the only thing that buys you is that your server will have been configured to boot up to runlevel 5, running a graphical desktop (gnome or kde, I forget which). And what does THAT buy you on a server?
I do not run ANY of my Linux servers "in graphical mode" -- running a graphical desktop. Nor did I run a graphical desktop when I had Solaris, AIX, or HP-UX servers.

Recovering earlier installed Windows 7 after installing Arch Linux

I'm trying to boot windows on my ASUS notebook.
There was windows 7 from the very beginning (disks C:\ and D:\), then I divided disk D:\ on several partitions and installed Arch Linux. I overwrited Windows boot information by boot part of Linux. Now I want to recover windows, that I still have on hard drive. It doesn's matter what there will be: dualboot or only windows (but dualboot is prefered).
Disk info:
[jhon@fckrsns ~]$ sudo fdisk -l
Disk /dev/sda: 698.7 GiB, 750156374016 bytes, 1465149168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 1AFC9DFF-CD3B-4CE1-8CAF-41C3E5B75772
Device Start End Size Type
/dev/sda1 2048 411647 200M EFI System
/dev/sda2 411648 673791 128M Microsoft reserved
/dev/sda3 673792 586731519 279.5G Microsoft basic data
/dev/sda4 586731520 691589119 50G Linux filesystem
/dev/sda5 1412718592 1465147391 25G Windows recovery environment
/dev/sda6 691589120 901304319 100G Linux filesystem
/dev/sda7 901304320 1412718591 243.9G Microsoft basic data
[jhon@fckrsns ~]$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 698.7G 0 disk
├─sda1 8:1 0 200M 0 part /boot
├─sda2 8:2 0 128M 0 part
├─sda3 8:3 0 279.5G 0 part
├─sda4 8:4 0 50G 0 part /
├─sda5 8:5 0 25G 0 part
├─sda6 8:6 0 100G 0 part /home
└─sda7 8:7 0 243.9G 0 part
sr0 11:0 1 1024M 0 rom
[jhon@fckrsns ~]$ lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 vfat 4DEB-D6D2 /boot
├─sda2
├─sda3 ntfs OS 62364BE9364BBCB3
├─sda4 ext4 c4da4683-871a-49fa-96a3-4da11387d31d /
├─sda5 ntfs Recovery 8ECE4F50CE4F2FAF
├─sda6 ext4 3eba01c6-e422-4542-8442-16064c74a563 /home
└─sda7 ntfs 3B29E7794F6CD932
sr0
OS partition (/dev/sda3):
[jhon@fckrsns /]$ ls /run/media/jhon/OS
altera Boot djvureader DrWeb Quarantine eSupport hiberfil.sys MSOCache N56VM.BIN pagefile.sys Program Files Recovery SecurityScanner.dll VisualCLibs
AsusVibeData bootmgr Documents and Settings eclipse Games Intel MS.Office.2007.Portable.micro.v.1.16 N56VZ.BIN PerfLogs Program Files (x86) $Recycle.Bin System Volume Information Windows
AVScanner.ini BOOTSECT.BAK DOSBox_SIM END gcc Keil_v5 mtd NVIDIA ProgramData Qt R.G. Catalyst Users
I tried to recover MBR with different ways:
with syslinux:
[jhon@fckrsns /]$ sudo dd if=/usr/lib/syslinux/bios/mbr.bin of=/dev/sda
0+1 records in
0+1 records out
440 bytes (440 B) copied, 0.0226394 s, 19.4 kB/s
with ms-sys:
[jhon@fckrsns /]$ sudo ms-sys --partition /dev/sda1
Start sector 2048 (nr of hidden sectors) successfully written to /dev/sda1
Physical disk drive id 0x80 (C:) successfully written to /dev/sda1
Number of heads (255) successfully written to /dev/sda1
[jhon@fckrsns /]$ sudo ms-sys --mbr7 /dev/sda
Windows 7 master boot record successfully written to /dev/sda
But there is still no way to boot windows.
I run grub-mkconfig before and after these manipulations with MBR:
[jhon@fckrsns ~]$ sudo grub-mkconfig -o /boot/grub/grub.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-linux
Found initrd image: /boot/initramfs-linux.img
Found fallback initramfs image: /boot/initramfs-linux-fallback.img
No volume groups found
done
[jhon@fckrsns /]$ sudo os-prober
/dev/cdrom: open failed: No medium found
No volume groups found
I installed rEFInd, now I have two choices on boot screen: vmlinuz-linux, which it founded, and my earlier installed grub bootloader.
Maybe I missed something, but i don't know what exactly.
Last edited by Jhon (2014-09-28 16:45:38)

Now I know that I don't need MBR at all (but google told me that recovering windows = recovering MBR..)
Are there any ways to recover boot information on EFI system partition from Linux without using Windows Live CD and it's bootrec.exe?
I have bootmgr and bootmgfw.efi files on /dev/sda3 (partition with windows installed), what else I need? Simple copy of bootmgfw.efi to /boot/EFI/Microsoft/Boot/bootmgfw.efi and addition of custom menu item to /etc/grub.d/40_custom does'nt work. There is Windows now in rEFInd and GRUB menus, but there is error on loading.

11gr2 install on linux 64

Similar Messages

Maybe you are looking for