11gR2 installation on Solaris failed with prereuisite 124861-15
The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
When I tried to install the patch 124861-20, it failed with the following(see below):
I have Sun Studio 12-2 installed on the system.
It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
Thanks.
Zhigang
# patchadd 124861-20
Validating patches...
Loading patches installed on the system...
Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
Checking patches that you specified for installation.
Done!
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 124861-20 are installed on the system.
Hi,
The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
When I tried to install the patch 124861-20, it failed with the following(see below):
I have Sun Studio 12-2 installed on the system.
It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
Thanks.
Zhigang
# patchadd 124861-20
Validating patches...
Loading patches installed on the system...
Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
Checking patches that you specified for installation.
Done!
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 124861-20 are installed on the system.
Refer my post *11gR2 Installation Error with patch 124861-15 as pre Req*
http://appsdbaworkshop.blogspot.com/2010/11/11gr2-installation-error-with-patch.html
thanks,
X A H E E R
Similar Messages
-
Third party payload installer DistillrStarter.exe failed with exit code: 1603
I need to reinstall FrameMaker 11 after a system crash. At 99% of the installation process, I get the following message.
(For my understanding, downloading a new DistillrStarter.exe should solve the issue.
The file is for creating Japanese PDFs. I do not even need it. :-)
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW030 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe PDF Creation Add-On 10 10.0.0.0 {AC76D478-1033-0000-3478-000000000005} -----------
ERROR: Third party payload installer DistillrStarter.exe failed with exit code: 1603
----------- Payload: Adobe FrameMaker 11_AdobeFrameMaker11_en_US 11.0.0.0 {E26880FB-DEB4-4299-A1EB-FDEB85C09FD7} -----------
ERROR: DW030: Custom Action for payload Adobe FrameMaker 11_AdobeFrameMaker11_en_US 11.0.0.0 {E26880FB-DEB4-4299-A1EB-FDEB85C09FD7} returned error. Failing this payload.Hi Mylenium,
from the notifications, IMHO, FrameMaker installation failed because of a corrupt DistillrStart.exe file in the installer.
What I did not know, in the installation options, I could disable PDF maker.
I do not need this module, that is already installed with Acrobat Pro on my system.
In the support chat, I was not pointed to this, either. Although I asked if I really had to uninstall
all Adobe software from my system before re-installing, even Acrobat...
Thank God, my company's administration remembered this issue from a previous installation.
Best regards,
Michael -
During the Installation of LR I get an error message. Initially I didn't have enough space for the installation on the start partition drive. However, now, it should be sufficient and I re-booted the computer a couple of time, hence I would assume that the temporary installation files have been deleted.
Now, nevertheless each time I try to re-install the software I get the following messages:
ERROR: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
Since PS was installed without problems I would refrain from deinstalling the Creative Cloud and start over again.
Any hints?
ThxClaasd5335054 you will want to review the MSI log files to determine what error message is preventing the installation from completing.
ERROR: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
This is the only error information contained within Adobe Lightroom 5's installation log. The MSI log files contain the additional error messages. -
Here's the error summary:
Exit Code: 6
See error summary below:
I installed the Visual C++ 2008 redis pkg from Microsoft site (both x86&x64) then tried reinstalling and after 2 hours the very error and nothing installed!!!
VERY FRUSTRATING...
Please advise
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s)
----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.4148 {9C4AA28F-AC6B-11E0-8997-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1603
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x86). Please try installing it by double clicking on the executable at "\\nbcc-srv-v-fs01\co-share\Finance and Administration\Information Technology\Software\Adobe\MasterCollection_CS6_LS16\WIN\Adobe CS6\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148 {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1603
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "\\nbcc-srv-v-fs01\co-share\Finance and Administration\Information Technology\Software\Adobe\MasterCollection_CS6_LS16\WIN\Adobe CS6\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.comuninstall those old ms vc packages and install the latest, Latest Supported Visual C++ Downloads
then uninstall anything cs6 that did get installed, clean and reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
My install of Photoshop CC failed during download with the error message:
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Charles\AppData\Local\Temp\{6451C8AE-D1A8-4B06-9A19-583A0AAC7146}\Photoshop_15_ LS20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com
But I don't find anything in the path described.
The machine is an Asus desktop PC running Windows 8.1 (which I hate and despise) but was stuck with on this recently purchased PC.
Since I can't find the file or error code -2147024546 what is my next step to complete an install?
Thanks,
CharlesCharles the Microsoft Visual C++ 2012 Redistributable Package (x86) component of your operating system has become damaged. You can reinstall it from Latest Supported Visual C++ Downloads.
-
Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
Hello there,
I've been having problems with Premier since installing it on Windows 8.1
I'm signed up with creative cloud but first I was having trouble actually loading the program (it just kept trying to load then would bomb
Then it would load but wouldn't give me an option to actually edit movies by dragging them to the timeline (it would drag the movie only no sound)
And today I've tried an upgrade but get an error message with it. As above (the full summary is below).
I've tried to uninstall and reinstall through windows and it appeared to uninstall and resintall but I now have this problem.
<PRE>Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at "C:\Users\Tony\AppData\Local\Temp\{16356A70-E248-4837-900C-D624C25EAB3B}\PremierePro_8_LS 20\Adobe Premiere Pro CC 2014\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com
</PRE>You might attempt to simply REBOOT and then retry the installation.
VC++ 2012 x64 can require a restart. The Adobe installer is not designed to handle this situation. If this is the issue in your case, rebooting will resolve it.
You are less likely to run into this particular issue if you reboot your PC and then run the Adobe install with every other program and tray icon closed. -
Acrobat X problem updating.
ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
MSI Error message: Ugyldigt drev: K:\
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
I have uninstalled my AcrobatX and now This message appear when I try to reinstall:
ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
MSI Error message: Ugyldigt drev: K:\
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Is there anybody who know how to solve it?Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra -
I'm trying to install Adobe Muse but keep getting an installation failed message. It generates the following error code
ERROR: Third party payload installer InstallAdobeMuse.exe failed with exit code: 255
Anyone have any ideas?Hi Njugl
Please look for Muse in your machine and uninstall it if present. Run the cleaner tool: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation -problems.html and remove any ruminants of Muse.
Enable root account:http://support.apple.com/kb/ht1528 in case of Mac.
Download CC desktop and try to install
Muse:https://creative.adobe.com/products/creative-cloud .
Please refer the kb for Exit Code 7: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html .
Regards,
Prabs -
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 -----------
ERROR: Schlüssel ist im angegebenen Status nicht gültig.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: Schlüssel ist im angegebenen Status nicht gültig.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603Same problem. I have CC installed on Win 7 with all other apps working fine. Tried to install Lightroom 5 and got:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.7.0.0 Adobe_Lightroom_x64.msi_5.7 -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {5C21D397-1DA5-
3749-8C1F-165F21DE9E3E}. HRESULT: 0x80070003.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component
{5C21D397-1DA5-3749-8C1F-165F21DE9E3E}. HRESULT: 0x80070003.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
I uninstalled all Adobe CC software, ran Adobe CC Cleaner, cleaned my Registry using Piriform CCleaner 5, rebooted and reinstalled CC from scratch. Same problem--everything else installed correctly except Lightroom 5. Also tried uninstalling KB2918614--no joy.
Dayton -
every time i download lightroom 5 it fail and says the cause is this (errror: third party payload installer Adobe_Lightroom.msi failed with exit code: 1603..
you should dl lr 5.7 and then check that your download is complete. if the same error message results when you try to install, start here - Error 1603: A fatal error occurred during installation
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {F24CABFE-ED58-3012-A491-F671A890E43B}. HRESULT: 0x80071A30.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {F24CABFE-ED58-3012-A491-F671A890E43B}. HRESULT: 0x80071A30.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603I followed the ostensibly applicable steps outlined in the above linked articles and no go.
Further, I have uninstalled and reinstalled .net framework two times.
Adobe's tech support team has (according to their findings) "determined" that my windows .net framework is "corrupted" and as such my system will disallow the installation of any .msi programs; my only salvation (according to Adobe) is to fork over $100.00 to Microsoft for "advanced" Windows tech support. Earlier today I was easily able to install Silkypix RAW software which is a program having an .msi extension. This seems to contradict the Adobe technical team's findings. Moreover, I've had ZERO installation issues with any other developer's programs including Corel, Sony and a host of additional 3rd party programs- ponderous.
As well, both Adobe Air and Acrobat function and routinely update on my system without incident. For the life of me I have no idea what to do to remedy this frustrating issue.
In addition to the 1603 error, I see a 1935 error as well. I would greatly appreciate any useable suggestions to permit the installation of Lightroom and PS.
Thanks! -
Solaris 10 Update 1 PXE Installation on SPARC fails with the error message.
Hi,
The remote installation is continiously failing for older updates, I tried with different images but all fails with the same error message ' Using DHCP for network configuration information.
^CMar 17 13:07:00 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 130.
[ system/install-discovery:default failed (see 'svcs -x' for details) ]
Requesting System Maintenance Mode" , the log of the same given below:-
{1} ok boot net:dhcp -v install
SC Alert: Host System has Reset
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V240, No Keyboard
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
Rebooting with command: boot net:dhcp -v install
Boot device: /pci@1f,700000/network@2:dhcp File and args: -v install
1000 Mbps FDX Link up
Timed out waiting for BOOTP/DHCP reply
1000 Mbps FDX Link up
Using BOOTP/DHCP...
Using DHCP for network configuration information.
/sbin/install-discovery: /etc/inet/hosts: cannot create
Mar 17 13:05:58 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 1.
ln: cannot create /tmp/devices/devices: Operation not applicable
mount: /tmp/dev: Device busy
Configuring devices.
devfsadmd: daemon pid 28 is already running
mount: fd is already mounted or /dev/fd is busy
Using DHCP for network configuration information.
<unknown>: warning: dhcpagent: daemonize: timed out awaiting adoption.
/sbin/install-discovery: /etc/inet/hosts: cannot create
Mar 17 13:06:40 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 1.
ln: cannot create /tmp/devices/devices: Operation not applicable
mount: /tmp/dev: Device busy
Configuring devices.
devfsadmd: daemon pid 28 is already running
mount: fd is already mounted or /dev/fd is busy
Using DHCP for network configuration information.
^CMar 17 13:07:00 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 130.
[ system/install-discovery:default failed (see 'svcs -x' for details) ]
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
# svcs -xv
svc:/system/install-discovery:default (install-discovery)
State: maintenance since Sun Mar 17 13:07:00 2013
Reason: Start method failed repeatedly, last exited with status 130.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/system-install-discovery:default.log
Immediate response in this case is appreciated.
Thanks
ASModerator Comment:
Immediate response in this case is appreciated.No.
This is not company technical support.
If you want speedy assistance, use your contract credentials and log a support case.
No one here is paid to respond.
No one here is a company representative, nor are they responding as representatives of the company. There is no obligation that any inquiry get assistance, and your presumptive statement is bordering on being rude. -
11gr2 rac silent install failed with INS-35421
When ran 11gr2 silent installation. it has this warning info:
[WARNING] [INS-35421] This option installs a single instance database only.
CAUSE: You have chosen to perform a Desktop class install on a cluster. This option will not install Oracle RAC.
ACTION: If you wish to install Oracle RAC, choose to perform a Server class install.
And i find that the db was not been created.( I selected creating database in response file)
The folowing is my response file:(this file was created by OUI, and i did not find where to set the option of desktop/server class)
oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0
oracle.install.option=INSTALL_DB_AND_CONFIG
ORACLE_HOSTNAME=node1.us.oracle.com
UNIX_GROUP_NAME=oinstall
INVENTORY_LOCATION=/home/oracle/app/oraInventory
SELECTED_LANGUAGES=en
ORACLE_HOME=/home/oracle/app/oracle/product/11.2.0/dbhome_1
ORACLE_BASE=/home/oracle/app/oracle
oracle.install.db.InstallEdition=EE
oracle.install.db.isCustomInstall=false
oracle.install.db.customComponents=
oracle.install.db.DBA_GROUP=dba
oracle.install.db.OPER_GROUP=dba
oracle.install.db.CLUSTER_NODES=node1,node2
oracle.install.db.config.starterdb.type=GENERAL_PURPOSE
oracle.install.db.config.starterdb.globalDBName=orcl.us.oracle.com
oracle.install.db.config.starterdb.SID=orcl
oracle.install.db.config.starterdb.characterSet=AL32UTF8
oracle.install.db.config.starterdb.memoryLimit=791
oracle.install.db.config.starterdb.memoryOption=true
oracle.install.db.config.starterdb.installExampleSchemas=true
oracle.install.db.config.starterdb.enableSecuritySettings=true
oracle.install.db.config.starterdb.password.ALL=Oracle123
oracle.install.db.config.starterdb.password.SYS=
oracle.install.db.config.starterdb.password.SYSTEM=
oracle.install.db.config.starterdb.password.SYSMAN=
oracle.install.db.config.starterdb.password.DBSNMP=
oracle.install.db.config.starterdb.control=DB_CONTROL
oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL=
oracle.install.db.config.starterdb.dbcontrol.enableEmailNotification=false
oracle.install.db.config.starterdb.dbcontrol.emailAddress=
oracle.install.db.config.starterdb.dbcontrol.SMTPServer=
oracle.install.db.config.starterdb.automatedBackup.enable=false
oracle.install.db.config.starterdb.automatedBackup.osuid=
oracle.install.db.config.starterdb.automatedBackup.ospwd=
oracle.install.db.config.starterdb.storageType=FILE_SYSTEM_STORAGE
oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=/storage/oradata
oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=
oracle.install.db.config.asm.diskGroup=
oracle.install.db.config.asm.ASMSNMPPassword=
MYORACLESUPPORT_USERNAME=
MYORACLESUPPORT_PASSWORD=
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
DECLINE_SECURITY_UPDATES=true
PROXY_HOST=
PROXY_PORT=
Edited by: user778302 on Jun 9, 2010 8:21 PMWindows 7 Enterprise
I have read portions of the Installation manual, and yes, I am aware of the issues with DHCP but that's how we do things here, so I'm not going to change that setting. From reading through the installation instructions, I see that the 11gR1 installation program asked for much more information, i.e., many more decisions than the 11gR2 installation program. I do not know if this is because of some choice up front that then excludes other options. Thanks.
Ken
Kwn -
Getting mkldflags error in Oracle 11gR2 installation on Solaris 10..
Hi Guys,
I am installing Oracle 11gR2 on Solaris 10 Server, but on 79%, I am getting below error :
Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile '/u4/ORA11/app/ora11/product/11.2.0/dbhome_1/network/lib/ins_net_client.mk'.
checked make.log, below is the error message:
/usr/ccs/bin/ar rv /app/oracle/product/11.2.0/grid/lib/libn11.a /app/oracle/product/11.2.0/grid/lib/nnfgt.o ; fi)
/usr/ccs/bin/as: "nnfgt.s", line 39: error: can't compute value of an expression involving an external symbol
make: Fatal error: Command failed for target `nnfgt.o'
Please suggest.....If you have met all of the prereqs outlined in the Install Guide, then pl open an SR for this issue
-
When I upgraded to the latest Firefox on my Windows 7 PC , I get a 7-Zip Error Box stating " The System cannot find the file specified". This happens approximately two thirds into the installation. I have tried turning the Virus checker off and re-installing, but to no avail.
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Try this:
*Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all/
*Start the installation with a double-click on the desktop icon
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware
Maybe you are looking for
-
Upgraded itunes won't open at all.
No error messages, just the little egg timer before....nothing happens. Everything worked ok with the old itunes pre upgrade this morning. I am no techie so please help in idiot proof language!!! Windows XP.
-
Problem with downloading free software from AppStore
When I want downloading free software from AppStore , open the window "some problem previous purchases with payment ", but I downloading only wathsapp and pay for this. After i downolading only free applications. Why this window open?
-
Can you recover a note when accidentaly deleted?
My main concern or frustration here is with NOTES. 1. Is it possible to recover a NOTE when deleted? 2. Is there any way to UNDO [command] when cutting text from a note? 3. DoesiCloud mantain any info on this?
-
HT3296 AppleTV sees double presses on learned third party remote
I have a Pioneer Elite VSX-52 receiver and have performed the learn remote function on my AppleTV 3rd gen. The problem is when I use it, the AppleTV registers two presses instead of one. I thought perhaps I was holding the buttons down too long when
-
I have iPhone 5 & iPad Air both w/ iOS 7.1. Pre-iPad, my iPhone notifications (ESPN) appeared on lock screen. Since adding iPad to account, notifications only appear at top of my phone screen after I unlock phone but they show on iPad lock screen. An