11gR2 Installer - Desktop vs Server option

Hi all,
I am installing 11gR2 on SLES 11, and in the installer gui screen, there is Desktop and Server Install type option.
Can I install server type on desktop pc and vice versa desktop on server machine?
I am given a HP machine, and i dont know if it is a server or workstation desktop because it looks like server too.
How can i tell if a machine is a server or a workstation?
Thanks a lot,
Yxz

"If you are installing on a laptop or a desktop, then select the Desktop Class option; otherwise, select the Server Class option to install on a server. These options are available on the System Class screen.
There is no difference in the software that gets installed after you select any one option but the Desktop Class option installs a single instance database without the advanced configuration options."
Check
http://docs.oracle.com/cd/E11882_01/install.112/e16763/whatsnew.htm

Similar Messages

Web Server Options for APEX Installation on Oracle Database 10g

Hi. We are installation a APEX on a test server that is running Oracle Database 10g 10.2.0.4.0. As I understand it there are two Web Server Options:
1) Oracle HTTP Server (Apache)
2) Oracle Application Express Listener
Do both of these work for Oracle Database 10g 10.2.0.4.0? I thought I remember reading somewhere that only the Oracle Application Express Listener would only work with database version 11 or higher.

Do both of these work for Oracle Database 10g 10.2.0.4.0?Yes.
I thought I remember reading somewhere that only the Oracle Application Express Listener would only work with database version 11 or higher. No, that restriction (with the exception of 10g XE) applies to the third web server option which you haven't mentioned: Embedded PL/SQL Gateway (EPG), as discussed in your previous thread: +{thread:id=2201975}+
System requirements for APEX Listener
{forum:id=858} forum

Can MoveUser move a user's mailbox from an installation of Mail Server 2.X to Messaging Server 3.X?

Can MoveUser move a user's mailbox from an installation of Mail
Server 2.X to Messaging Server 3.X?
<P>
Yes.
The 2.x server allows the postmaster to login to a user's account.
Try running MoveUser as follows:
MoveUser -u uid -s host -xPostmaster:uid -p password
-d desthost -a proxyuser -v proxypassword -m mailboxpath
Notes:
Mail Server 2.x uses a local database and not an LDAP server
for account information. The -l option
specify ldap URL and the associated bindDN password,
therefore, are not valid when moving from
Mail Server 2.x to Messaging Server 3.x.
"Postmaster:" is case sensitive.
The -a and -v options are for Messaging Server 3.x
ProxyAuthUser credentials.
We do NOT allow this login to a 3.x server
(use PROXYAUTH instead).

Additionally
When I type in fasn26p (machine name) the Oracle Application Server Welcome page displays.
I can get to the Enterprise Manager via the link on the page.
On the All Programs menu, under Oracle - OraDb10g_home1 I can access the Datbase Control page and login. The line for Database Instance: Orcl is -
http://fasn26p:1158/em/consol/database/instance/sitemap?event=doloa&....
One last thought. I installed this with this on my network at home and I now have it disconnected from the network. So no IP address for the adapter and I wonder if that can cause a problem with Apache?
Sam

R12 Installation in production server

Hi
I want to install R12 in production server. Client has bought Financial, Procurement, Inventory, Order Management & HCM (Human Capital Management). During Installation there is one option to select the product.
Anyone would suggest me, which checkboxes should I select to installation and implement above mentioned modules successfully. Or you have any reference metalink documentation please let me inform.
It will very helpful for me.
Best regards,
Makshud

Hi,
Please refer to [Oracle Applications Installation Guide: Using Rapid Install |http://download.oracle.com/docs/cd/B40089_09/current/acrobat/120oaig.pdf], Page 2-11. If you missed licensing any product during the installation you can do it later after the installation (via OAM).
Regards,
Hussein

Bipublisher desktop - report server

Hi,
I am using bi publisher desktop on windows 7 with office 2010, I am trying to edit a templated generated from an R12 instance, before I can open the file I am prombted to logon. it prompts me for a username password and Report Server, how can I find out what to enter into the report server option.

I am getting the same error too! Any help is greatly appreciated. I use OAS 10.1.3.3 to host the xmlp server. I can bring up BI Publisher by entering the URL on a browser. However when I cut paste the same URL into BI Plublisher / MS Word login box it doesn't work.

Oracle 11gR2 Installation Error "Invalid Entry Size"

Hi Gurus,
I am getting this error **"invalid entry size (expected 3486269263 but got 19496 bytes) "** during Oracle 11gR2 installation on Solaris 5.10.
Here is the config log
INFO: Extracting files to '/export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1'.
INFO: Extracting files to '/export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_exp_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_dirs.lst'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_filemap.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
INFO: Number of threads for fast copy :1
INFO: invalid entry size (expected 3486269263 but got 19496 bytes)
SEVERE: oracle.sysman.oii.oiif.oiifb.OiifbEndIterateException: invalid entry size (expected 3486269263 but got 19496 bytes)
     at oracle.sysman.oii.oiic.OiicInstallAPISession.doOperation(OiicInstallAPISession.java:453)
     at oracle.sysman.oii.oiic.OiicAPIInstaller.doOperation(OiicAPIInstaller.java:973)
     at oracle.sysman.oii.oiic.OiicAPIInstaller.doOperation(OiicAPIInstaller.java:936)
     at oracle.install.driver.oui.OUISetupDriver.setup(OUISetupDriver.java:459)
     at oracle.install.driver.oui.SetupJob.call(SetupJob.java:166)
     at oracle.install.driver.oui.SetupJob.call(SetupJob.java:47)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
     at java.util.concurrent.FutureTask.run(FutureTask.java:123)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
     at java.lang.Thread.run(Thread.java:595)
INFO: Update the state machine to STATE_READY
INFO: isSuccessfullInstallation: false
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Shutting down OUISetupDriver.JobExecutorThread
SEVERE: [FATAL] invalid entry size (expected 3486269263 but got 19496 bytes)
CAUSE: No additional information available.
ACTION: Refer to the logs or contact Oracle Support Services
SUMMARY:
- invalid entry size (expected 3486269263 but got 19496 bytes).
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:5850
INFO: Advice is ABORT
SEVERE: Unconditional Exit
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Database 11g Release 2 Installer
Please help me to solve this issue

Hi Hans,
Thanks for your reply, after downloading the new installer "invalid entry size" error is gone now.
but once the installer reaches to 68% then its giving the error " Error in invoking target 'mkldflags ntcontab.o' of makefile '/export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1/network/lib/ins_net_client.mk'
Here is the log info:
INFO: (if [ "assemble" = "assemble" ] ; then \
/export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1/bin/gennttab > ntcontab.s ;\
/usr/ccs/bin/as -P -m64 -o ntcontab.o ntcontab.s ;\
rm -f /export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1/lib/ntcontab.o ;\
mv ntcontab.o /export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1/lib/ ;\
/usr/ccs/bin/ar rv /export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1/lib/libn11.a /export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1
INFO: /lib/ntcontab.o ; fi)
INFO: /usr/ccs/bin/as: error: unknown option '6'
/usr/ccs/bin/as: error: unknown option '4'
usage: /usr/ccs/bin/as [-V] [-Q{y,n}] [-q] [-s]
     [-S] [-K {pic,PIC}] [-o objfile] [-L] [-T]
     [-P [[-Yc,path] [-Ipath] [-Dname] [-Dname=def] [-Uname]]...]
     [-m [-Ym,path]] [-n] [-ul] [-xF] [-xarch={v7,v8,v8a,v8plus,v8plusa,v8plusb,v9,v9a,v9b}] [-xcode={pic13,pic32}] file.s...
INFO: *** Error code 1
INFO: make: Fatal error: Command failed for target `ntcontab.o'
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile '/export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1/network/lib/ins_net_client.mk'. See '/export/home/oemora/logs/installActions2010-03-08_08-42-39PM.log' for details.
Exception Severity: 1
INFO: Adding ExitStatus STOP_INSTALL to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -4
INFO: Shutdown Oracle Database 11g Release 2 Installer
INFO: Unloading Setup Driver
Thanks
Krishna

How to replace ENTERPRISE Server Option by BB Internet Service Option?

On my 8700 there is the ENTERPRISE Server option installed.
As I want to vsend and receive emails from different email account without making use of the BB Enterprise geature I would like to get rid of the Enterprise-program installed and replace it by the Internet Service option.
I wonder whether this would be possible.
Can I replace Enterprice feature by the normal Internet Service?? and how?
Thank you for any information
Solved!
Go to Solution.

Hi there!
The options you are presented with when you start the email configuration wizard are controlled by virtue of the account type you have with your carrier. Given what you describe, it sounds as if you have perhaps on a generic data plan (or perhaps no data plan at all) -- that is normally not sufficient to grant you access to the Blackberry Internet Service that is hosted at your carrier. To enable Personal Email configuration, you must contact your carrier and request what is often (thought not universally) called The Blackberry Data Plan. Whatever it is called, you need a plan from your carrier that grants you access to the enhanced Blackberry services that they host - and you must pay them to access those enhanced services. Once you have that proper account, you will have Personal email as a configuration option (note, though, that Enterprise will not be "replaced"...rather, Personal will be added to the screen).
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error while installation of content server.

HI
I installed the plumtree portal (PlumtreePortal_v5-0.exe) and Content server (PlumtreeContentServer_v5-0.exe). The portal is working fine. But When I completed the installation of content server I received the following errors, when I checked the diagnosticTests.jsp Which tells whether the installation is successful or not....
I found 2 bugs
- Root Section Publishing Target
- Root Section Preview Target
Possible Resolution is as follows.
The Publishing Target Browser Path is invalid. The item was published successfully but could not be found at the Browser Path. To change the publishing target right click on the root folder in Content Explorer and choose "Publishing Target". Click on the Publish Tab. Change the Browser Path to a valid path.
I am not able to find the Content server explorer. Please let me know how and where can I find these editor
- Content server explorer
- Portlet Editor
- Data Entry Template Editor
- Presentation Template Editor
- Workflow Editor
- WebDav Interface
Thanks
Vivek

Hi Sankar
Error indicates memory problem.
1. go to configtool and change the values for > server0 > Max heap size = 2048 MB.
-xx:NewSize=320m
-xx:MaxNewSize=320m
-xms2048m
-xx:PermSize=256m
-xx:MaxPermSize=256m
Please check the note 723909 for any further clarification.
Exclusively for Sun Solaris
Check the following:
1050866 : Java VM terminates under Sun Solaris 5.10 during install.
1048824: JLaunch may fail to start the Java VM during installation
Hope this helps
Cheers !!!
Satish Kumar.

Unattended Solaris 10 installation with jumpstart server issue

Hello,
I have setup a jumpstart server and am finding it difficult to get a fully unattended solaris 10 sparc 10/09 install on a t1000 client. The console connection to the client goes into interactive mode at the point in system identification when the installer asks if the system is networked or non-networked, and runs a setup of default time zone and date/time. Using esc-2 to advance through the interactive menu it asks if ithe system is on a subnet, for the netmask (which is there as default), asks if the current time is correct, then asks me to confirm that my selections are correct. When I confirm it goes on it's merry way to finish the installation unattended.
My guess is it does not like one of the values in the sysidcfg file being used, but can't seem to see where the problem is. I don't see anything in the table of sysidcfg keywords from the online docs that specify networked or not, and I am using the network_interface keyword to define hostname, ip, default router, netmask and ipv6, and thought that should take care of the networking portion of system identification, also have timezone and time server set.
Could it be that I am configuring an ethernet port that is not connected (bge0)? This computer will be deployed on a DMZ type network, and the jumpstart server is located on a different network our internal private network. The jumpstart installation via the server is done by using a temporary ethernet connection on a second interface of the client. One other note the defined time server is on the dmz so the installation program won't see it.
Any suggestions on what might be causing the interactive installer to kick in?
Here is the sysidcfg used for the client:
more sysidcfg_vlan3/sysidcfg
keyboard=US-English
terminal=vt100
security_policy=NONE
system_locale=en_US
install_locale=en_US
timeserver=service-time
timezone=US/Eastern
network_interface=bge0 {hostname=D-Wade.xxx.xxxx.xxx default_route=xx.xx.xxx.1 ip_address=xx.xx.xxx..3 netmask=255.255.255.0 protocol_ipv6=no}
name_service=NONE
nfs4_domain=dynamic
root_password=someEncryptedValue
service_profile=limited_net
Thanks,
John
Edited by: jmck407 on Aug 6, 2010 11:42 AM

update. Fixed the problem with date/time by using abrante's suggestion of setting the time server to localhost. Don't get prompted for date/time information in the interactive installer any more.
If I setup the sysidcfg file to configure the ethernet port being used to communicate with the jumpstart server (bge1), using an ip and netmask that is on the jumpstart server network, the installation goes through fully un-attended.
Is there any way to get a second interface (in this case bge0) configured with ip/netmask values that are not part of the jumpstart server's network, using a non interactive jumpstart installation? Using these values in sysidcfg, the only things prompted for during the installation are, Is the system on a subnet, and what is the netmask. Anyone know what the sysidcfg part of the installation does to check the validity of a netmask value given in the sysidcfg file on the jumpstart server?
If need be, I guess the interface could be configured in the finish script.
more sysidcfg_vlan3/sysidcfg
keyboard=US-English
terminal=vt100
security_policy=NONE
system_locale=en_US
install_locale=en_US
timeserver=localhost
timezone=US/Eastern
network_interface=bge0 {hostname=D-Wade.xxx.xxxx.xxx default_route=xx.xx.xxx.1 ip_address=xx.xx.xxx..3 netmask=255.255.255.0 protocol_ipv6=no}
name_service=NONE
nfs4_domain=dynamic
root_password=someEncryptedValue
service_profile=limited_net

Can't access the "delete from server" option in AOL mail setting.

iPhone 4s, ios 5.1, Verizon customer. I have never had an issue until this phone. Any ideas why I can see the "delete from server" option, but I can't check it? It's really annoying to delete emails from my phone and then have to go back and delete from my computer.
Thank you in advance.

Is the email account that has this problem a POP account or IMAP. If POP, there should be a setting in the account's setting that determines whether an email is deleted from the server when downloaded. If IMAP than deleting on the device should delete on the server and other devices/computers. A problem can occur if the other devices have already downloaded the same email that you are trying to delete. It may take some time for it to delete from other devices. And some providers have bugs in this process. My carrier is Verizon, but I never use their email service.

Getting mkldflags error in Oracle 11gR2 installation on Solaris 10..

Hi Guys,
I am installing Oracle 11gR2 on Solaris 10 Server, but on 79%, I am getting below error :
Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile '/u4/ORA11/app/ora11/product/11.2.0/dbhome_1/network/lib/ins_net_client.mk'.
checked make.log, below is the error message:
/usr/ccs/bin/ar rv /app/oracle/product/11.2.0/grid/lib/libn11.a /app/oracle/product/11.2.0/grid/lib/nnfgt.o ; fi)
/usr/ccs/bin/as: "nnfgt.s", line 39: error: can't compute value of an expression involving an external symbol
make: Fatal error: Command failed for target `nnfgt.o'
Please suggest.....

If you have met all of the prereqs outlined in the Install Guide, then pl open an SR for this issue

Aperture library not available as desktop or screensaver option

Aperture library is not available as desktop or screensaver option. Nor is it available in Fotomagico. Any ideas?

Go into "System Preferences" -> "Desktop & Screensaver" -> "Desktop"
Scroll down the list on the left. The top categories should be the Apple default desktop images that came with Snow Leopard. Below that you should see iPhoto and it's events, albums, etc. Below that you should see Aperture with your projects listed below that.
Do you at least see the projects listed or does Aperture not even appear? Or is the problem that you aren't able to select any of the images from a project?
If the latter I'm wondering if you're missing previews. You might go into "Aperture" -> "Preferences..." and pick the "Previews" category. Make sure the check boxes are selected for "New projects automatically generate previews" and "Use embedded JPEG from camera when possible" (if your camera shoots in RAW+JPEG mode then it'll use the JPEGs from the camera as the preview instead of building it's own.)
You can force it to update previews but note that since it normally wants to generate previews automatically the 'Update Preview(s)' isn't a global function... it only rebuilds the previews for images you have selected (which means you have to go into each project, select all images, and do a "Photos" -> "Update Previews"
Beyond this, you'd probably need to run Aperture first-aid to determine if there is some corruption in the Aperture library preventing it from being used.

When douwnloading adobe premier pro fails. Writes that the installation is complete, some optional components are not installed correctly. What to do?

When downloading Adobe Premier pro fails, write that the installation is complete, some optional components are not installed correctly. What to do?

check your install logs for the problem, http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

À PROBLEM IN THE INSTALLATION OF SQL SERVER

I HAVE À PROBLEM IN THE INSTALLATION OF SQL SERVER ,I HAVE WINDOWS 8 64 BITS LENOVO ,I TRIED MANY VERSIONS, BUT IT DOESN'T WORK YET :(
PLEASE HELP ME !

I HAVE À PROBLEM IN THE INSTALLATION OF SQL SERVER ,I HAVE WINDOWS 8 64 BITS LENOVO ,I TRIED MANY VERSIONS, BUT IT DOESN'T WORK YET :(
PLEASE HELP ME !
Without the exact error message wwe will just hit arrow in the bush.Please post summary.txt which was generated due to failed installation.Below link will help you locate it
http://technet.microsoft.com/en-us/library/ms143702.aspx
Below link will give useful info about how to proceed with installing SQL server on win 8
Considerations before installing SQL server on win 8
Hardware and software requirement for installing SQL server 2012
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Bug when using Edit in Server Option while editting HiQ node.

I have recently started using HiQ nodes in my applications, but am running into problems. If I enter the "Edit in Server Option" and then change applications or click on another window without closing the HiQ server window I run into problems. I can no longer enter the "Edit in Server Option" and the HiQ program will not run. I can not seem to find the HiQ server window. The only way I have found around this problem is to close the current document, reopen it, delete the HiQ node and rewrite the entire code, and be very careful to always close the HiQ server window before doing anything else. Of course this is not a suitable solution. Has anyone else run into this problem? Have you figured out a fix?
Thanks,

Hi,
Base on my experience, it seems one of your node have not synced
the resource configuration, please run the cluster validation report test then post the error or warning part.
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

11gR2 Installer - Desktop vs Server option

Similar Messages

Maybe you are looking for