11gr2 rac installation on vmware runinstaller not able to visible all nodes

Hello,
Recently I have installed two nodes 11gr2 rac on vmware workstation 6 with OEL 5.4. CRS installation work fine. But after that when I do olsnodes, it's shows only one node. Also, when I try to install oracle database binary, in node selection tab, it's shows only respective nodes and not shows all nodes.

Installation of 11gr2 Grid was successfull or not?
Try to check the status of High Availability service daemon by typing the following command:
./crsctl check cluster. (on all nodes)
The output should look like this:
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online

Similar Messages

  • Oracle 11GR2 rac installation in vmware

    Hi all experts,
    I am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , i get below messages.
    [oracle@RAC1 ~]$ /etc/init.d/oracleasm configure
    -bash: /etc/init.d/oracleasm: No such file or directory
    I would appreciate if some one can help me out with this.

    You have not installed the required RPMs, in order to configure ASM. You can find them below. You can follow this step by step guide on how to configure ASM Eriglen Gani's Blog: Step By Step: Configuring Automatic Storage Management (ASM) on Standalone Server with Oracle Enter…
    oracleasm-2.6.18-194.el5-2.0.5-1.el5
    oracleasm-support-2.1.3-1.el5
    oracleasm-2.6.18-194.el5xen-2.0.5-1.el5
    oracleasm-2.6.18-194.el5PAE-2.0.5-1.el5
    oracleasm-2.6.18-194.el5debug-2.0.5-1.el5
    oracleasmlib-2.0.4-1.el5

  • I uploaded the latest X Yosemite and fond that Aperture did not work. Then I started the new Picture but are not able to upload all my pictures (app half of them) have anybody had the same issue? and can potentially advise me on how to fix it?

    I uploaded the latest X Yosemite and fond that Aperture did not work. Then I started the new Picture but are not able to upload all my pictures (app half of them) have anybody had the same issue? and can potentially advise me on how to fix it?

    Thanls Ernie. I found the solution. My problem was previous to 10.10.3. It looks like the installation of final cut and uninstallation of fcp delte a plugins that was needed for Aperture. I recover from time machine my plugins in Library/frameworks/plugin.manager.framework and now Aperture works ! Ouf....

  • FBL3N  Report  -not able to get all the transaction code details

    Hello,
    when FBL3N report  ran for one the expenses account (time paid off  - project charges account) , only few  line items are displaying  the transaction code like CJ88 and CJ8G.
    can you please tell me why all the line items are not showing the transactions codes and is there any know situation when the T- codes are not displayed.
    What I need to do, to get all the T- codes in the report ?
    I really appreciate your help.
    Regards
    Radha

    I know it is a line item report and I was expecting to see the transaction code details in the report for every line item. But in I'm not able to see all  T- codes for all the line items
    Thanks
    Radha

  • Not able to download all of my music onto my ipod 5 after 8.2 update

    After updating my 5th gen ipod touch to 8.2 software I am not able to download all of my music from my itunes library.
    I have updated the software twice now and have restored and gone back to factory settings and have started over from scratch.
    Before doing this my ipod wouldn't download any music. After doing this, it has downloaded some but not all music.
    For instance, out of 100 songs on a playlist, only 90 will download. My apps and photos seem okey, just not the music.

    Dotted circles next to songs, won't...: Apple Support Communities
    What does the gray dotted circle in...: Apple Support Communities
    what does the dotted circle mean?: Apple Support Communities

  • ODBC connection not able to see all schemas

    Hi everyone,
    We have noticed an unusual problem that just recently started. In our database, I have created a read-only user - only has the ability to connect to the database, and SELECT ANY TABLE. Then we have some applications (Crystal Reports and Lotus Notes Agents) that use this user to query data. The applications use an ODBC connection, and when we initially set this up, everything worked beautifully.
    However, suddenly we have noticed that the ODBC connection is not able to see all of the schemas in the database. We have tested and confirmed this - using either 9.02 ODBC or 10.01, this happens with both of them. I created a couple new ODBC connections, one for each version, then I try to create a new Crystal Report, using this ODBC connection - when I connect using the read-only user, it connects just fine, but when it shows me all of the schemas available, I am only seeing about half of them (and of course not seeing the one that I really need to see).
    However, when I use Microsoft Access, and try to import some External Data, and I use the same ODBC connections, then I AM seeing all of the schemas.
    Has anyone ever seen anything like this? Any ideas on what I can do to troubleshoot?
    Thanks,
    Brad

    I'm trying to get this issue figured out. Can you
    tell me what you mean when you ask me to log in
    directly as the same user using ODBC and query
    ALL_TABLES - how would I do that?Using whatever Oracle database account you use in Crystal, log in to the database using SQL*Plus (or your favorite GUI like SQL Developer) and run a query like
    SELECT owner, table_name
      FROM all_tablesDoes that query show all the tables you expect, or are you missing some?
    Also, you mention a parameter in the ODBC API that
    controls which schemas are returned - is there any
    way to see that value?An ODBC trace might show the value, I don't recall if the actual value is written out in the trace. Different front-end tools often have a place that allows you to filter out certain schemas, which is generally done by passing in a parameter to this ODBC API call. I don't know enough about your tools, though, to know where this might be.
    Are there any other ODBC drivers I could try?There are plenty of third party ODBC drivers out there, but I would tend to be suprised if the ODBC driver was at fault here. You could also try patching the ODBC driver and/or Oracle client to the most recent patchsets.
    Justin

  • About 2 weeks ago, not able to print all pages in a .pdf document using internet explorer 11?

    About 2 weeks ago, not able to print all pages in a .pdf document stored in a folder (I'm using Windows 7)? 
    It only prints 1 page then my Brother MFC-J4510DW Printer says "Please put another piece of paper in the feed slot"....the problem is the print setting is set to "manual mode" in Windows 7 rather than "general setting".  If you try to change the setting to "general", it will not accept the change.

    Hi.
    I did try using the printParams feature and it worked, but since I need to be able to print sets of non-consecutive pages,  I end up having to bring up the print dialogue multiple times and have the user set watermarks each time. 
    I decided to just create a new pdf in a temp directory containing the selected pages and open this document in a new window.  This works well and allows them to use the print button on the window to print, bringing up the print dialogue just once.  However, since I need to open the document in a way that shows the print button, I am using OpenInWindowEx, with AV_DOC_VIEW, and the option PDUseBookmarks or PDUseThumbs, rather than PDUseNone.  This displays a toolbar which also includes icons for creating a new pdf, deleting pages, etc.  I do not really want to include these icons on the toolbar.  Is there a way to remove unwanted icons from the toolbar, or make them invisible?
    Hope this makes sense.  Thanks for your help.
    Mary

  • I have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any sugg?

    i have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any suggestions?

    This problem has been reported a few times. The solution is to install any new App say a free one. This seems to fix whatever has gone wrong.

  • Hi, im not able to backup all ma contact to my icloud using my iphone 3gs. only 290 out of 600 contact gets backup in icloud, though i hav enough memory. How to fix it ?? I want to transfer my contacts from 3gs to 5s

    Hi, im not able to backup all ma contact to my icloud using my iphone 3gs. only 290 out of 600 contact gets backup in icloud, though i hav enough memory. How to fix it ??

    I have had similar issues backing up to iCloud. Thy only thing I have found to work every time is backing up to iTunes and then doing a restore to my new device. That includes iPhone 6.

  • Not able to download all the rows to excel sheet from alv grid display

    Hi experts,
    I am not able to download all the rows which are displayed in alv grid display for some material numbers.
    for some materials i am able to download, i used two ways to download 1) from icon(local file) on grid 2) menu list->export.
    i checked in debugging till selecting the spread sheet pop up window, i am able to see all the data in internal table.
    Can you suggest me what will be the problem....
    thanks in advance,

    hi sandeep,
    sorry for didnt specify clearly.
    note: EX: "asaasdada  in this sentence i said  " this symbol is special character not the text.
    building final internal table code
    CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
        EXPORTING
          capid                 = p_capid
          datuv                 = sy-datum
          ehndl                 = '1'
          mktls                 = 'X'
          mehrs                 = 'X'
          mmory                 = '1'
          mtnrv                 = p_matnr
          stlal                 = '1'
          stpst                 = 0
          svwvo                 = 'X'
          werks                 = p_werks
          vrsvo                 = 'X'
        TABLES
          stb                   = i_stb
        EXCEPTIONS
          alt_not_found         = 1
          call_invalid          = 2
          material_not_found    = 3
          missing_authorization = 4
          no_bom_found          = 5
          no_plant_data         = 6
          no_suitable_bom_found = 7
          conversion_error      = 8
          OTHERS                = 9.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      i_stb1[] = i_stb[].
      IF NOT i_stb1[] IS INITIAL.
        SORT i_stb1 BY idnrk.
        DELETE ADJACENT DUPLICATES FROM i_stb1 COMPARING idnrk.
        SELECT bmatn ematn FROM ampl INTO TABLE i_ampl
          FOR ALL ENTRIES IN i_stb1
          WHERE bmatn = i_stb1-idnrk AND
                datuv LE sy-datum AND                          
                datub GE sy-datum.                              
        SELECT
        matnr
        bwkey
        verpr
        stprs
        bwprh
        FROM mbew
        INTO TABLE i_mbew
        FOR ALL ENTRIES IN i_stb1
        WHERE
            matnr EQ i_stb1-idnrk AND
            bwkey EQ i_stb1-werks.
        IF NOT i_stb1[] IS INITIAL.
          SELECT matnr werks beskz
                 dzeit webaz plifz                              
                 ekgrp                                         
          INTO TABLE i_marc
          FROM marc
          FOR ALL ENTRIES IN i_stb1
          WHERE matnr = i_stb1-idnrk
          AND werks = i_stb1-werks.
          SORT i_marc BY matnr werks.
        ENDIF.
        CLEAR i_ekpo.
        CLEAR i_vend.
        IF NOT i_stb1[] IS INITIAL.
          SELECT ebeln ebelp matnr werks loekz aedat
                 netpr peinh                                   
          INTO TABLE i_ekpo
          FROM ekpo
                FOR ALL ENTRIES IN i_stb1
                WHERE matnr = i_stb1-idnrk
                AND werks = i_stb1-werks.
          SORT i_ekpo BY matnr ASCENDING
                         aedat DESCENDING
                         ebeln DESCENDING
                         ebelp DESCENDING.
          IF NOT i_ekpo IS INITIAL.
            SELECT k~ebeln k~lifnr l~name1
            INTO TABLE i_vend
            FROM ekko AS k INNER JOIN lfa1 AS l
            ON k~lifnr EQ l~lifnr
            FOR ALL ENTRIES IN i_ekpo
            WHERE ebeln = i_ekpo-ebeln.
            SORT i_vend BY ebeln.
          ENDIF.
        ENDIF.
      ENDIF.
      i_ampl1[] = i_ampl[].
      IF NOT i_ampl1[] IS INITIAL.
        SORT i_ampl1 BY ematn.
        DELETE ADJACENT DUPLICATES FROM i_ampl1 COMPARING ematn.
        SELECT matnr mfrpn mfrnr FROM mara INTO TABLE i_mara
          FOR ALL ENTRIES IN i_ampl1
           WHERE matnr = i_ampl1-ematn.
      ENDIF.
      SORT i_ampl BY bmatn.
      IF NOT i_stb[] IS INITIAL.
        SELECT stlty stlnr stlkn stpoz idnrk potx1 potx2
        INTO TABLE i_stpo
        FROM stpo
        FOR ALL ENTRIES IN i_stb
        WHERE stlty = i_stb-stlty
          AND stlnr = i_stb-stlnr
          AND stlkn = i_stb-stlkn
          AND stpoz = i_stb-stpoz
          AND idnrk = i_stb-idnrk.
        SORT i_stpo BY stlty stlnr stlkn stpoz idnrk.
      ENDIF.
      LOOP AT i_stb INTO wa_stb.
        READ TABLE i_marc INTO wa_marc
        WITH KEY     matnr = wa_stb-idnrk
                     werks = wa_stb-werks
                     BINARY SEARCH.
        IF sy-subrc = 0.
          wa_outtab-beskz = wa_marc-beskz.
          wa_outtab-dzeit = wa_marc-dzeit.                      
          wa_outtab-webaz = wa_marc-webaz.                     
          wa_outtab-plifz = wa_marc-plifz.                     
          wa_outtab-ekgrp = wa_marc-ekgrp.                     
        ENDIF.
        READ TABLE i_ekpo INTO wa_ekpo
            WITH KEY matnr = wa_stb-idnrk.
        IF sy-subrc = 0.
          wa_outtab-netpr = wa_ekpo-netpr.                     
          wa_outtab-peinh = wa_ekpo-peinh.                     
          READ TABLE i_vend INTO wa_vend
          WITH KEY ebeln = wa_ekpo-ebeln
                   BINARY SEARCH.
          IF sy-subrc = 0.
            wa_outtab-lifnr = wa_vend-lifnr.
            wa_outtab-name_sup = wa_vend-name1.
          ENDIF.
        ENDIF.
        READ TABLE i_stpo INTO wa_stpo
        WITH KEY stlty = wa_stb-stlty
                 stlnr = wa_stb-stlnr
                 stlkn = wa_stb-stlkn
                 stpoz = wa_stb-stpoz
                 idnrk = wa_stb-idnrk
                 BINARY SEARCH.
        IF sy-subrc = 0.
          wa_outtab-potx1 = wa_stpo-potx1.
          wa_outtab-potx2 = wa_stpo-potx2.
        ENDIF.
        READ TABLE i_mbew INTO wa_mbew
        WITH KEY
        matnr = wa_stb-idnrk
        bwkey = wa_stb-werks.
        IF sy-subrc IS INITIAL.
          MOVE:
          wa_mbew-verpr TO wa_outtab-verpr,
          wa_mbew-stprs TO wa_outtab-stprs,
          wa_mbew-bwprh TO wa_outtab-bwprh.
        ENDIF.
        wa_outtab-matnr = p_matnr.
        wa_outtab-posnr = wa_stb-posnr.
        wa_outtab-stufe = wa_stb-stufe.
        wa_outtab-idnrk = wa_stb-idnrk.
        wa_outtab-ojtxb = wa_stb-ojtxp.
        wa_outtab-menge = wa_stb-menge.
        wa_outtab-meins = wa_stb-meins.
        MOVE: wa_stb-zzitem_draw_no TO wa_outtab-zzitem_draw_no.
        IF wa_stb-upskz = 'X'.
          SELECT * FROM stpu INTO TABLE i_stpu
                   WHERE  stlty = wa_stb-stlty AND
                          stlnr = wa_stb-stlnr AND
                          stlkn = wa_stb-stlkn AND
                          stpoz = wa_stb-stpoz.
        ENDIF.
        LOOP AT i_stpu INTO wa_stpu.
          wa_outtab-upmng = wa_stpu-upmng.
          wa_outtab-ebort = wa_stpu-ebort.
          wa_outtab-uposz = wa_stpu-uposz.
          CONCATENATE v_ebort wa_stpu-ebort      INTO v_ebort
          SEPARATED BY space.
        ENDLOOP.
        MOVE strlen( v_ebort ) TO v_len.
        MOVE: 0 TO x,
          128 TO y.
        DATA : lt_tab TYPE TABLE OF swastrtab.
        DATA : ls_tab LIKE LINE OF lt_tab.
        DATA : lv_ebort TYPE string.
        CLEAR lv_ebort. CLEAR lt_tab.
        MOVE v_ebort TO lv_ebort.
        CALL FUNCTION 'SWA_STRING_SPLIT'
          EXPORTING
            input_string                 = lv_ebort
            max_component_length         = 128
          TABLES
            string_components            = lt_tab
          EXCEPTIONS
            max_component_length_invalid = 1
            OTHERS                       = 2.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        IF lt_tab[] IS NOT INITIAL.
          LOOP AT lt_tab INTO ls_tab.
            CLEAR lv_ebort.
            MOVE: ls_tab-str TO lv_ebort.
            CONDENSE lv_ebort.
            MOVE lv_ebort TO wa_outtab-ebort.
            APPEND wa_outtab TO i_outtab.
            CLEAR:
            wa_outtab-matnr,
            wa_outtab-posnr,
            wa_outtab-zzitem_draw_no,
            wa_outtab-ojtxb,
            wa_outtab-menge,
            wa_outtab-meins,
            wa_outtab-uposz,
            wa_outtab-upmng,
            wa_outtab-verpr,
            wa_outtab-stprs,
            wa_outtab-bwprh,
            wa_outtab-lifnr,
            wa_outtab-name_sup,
            wa_outtab-potx1,
            wa_outtab-potx2,
            wa_outtab-netpr,
            wa_outtab-peinh.
    *        wa_outtab-idnrk.
          ENDLOOP.
        ELSE.
          APPEND wa_outtab TO i_outtab.
        ENDIF.
        CLEAR v_ebort.
        CLEAR: wa_stpu.
        REFRESH: i_stpu.
        LOOP AT i_ampl INTO wa_ampl WHERE bmatn = wa_stb-idnrk.
        READ TABLE i_mara INTO wa_mara WITH TABLE KEY matnr = wa_ampl-ematn.
          IF sy-subrc = 0.
            LOOP AT i_outtab INTO wa_outtab
            WHERE
            idnrk = wa_stb-idnrk AND
            flag NE 'X'.
              wa_outtab-mfrpn = wa_mara-mfrpn.
              wa_outtab-mfrnr = wa_mara-mfrnr.
              SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
              MOVE 'X' TO wa_outtab-flag.
              MODIFY i_outtab FROM wa_outtab
              TRANSPORTING mfrpn mfrnr name1 flag.
              EXIT.
            ENDLOOP.
            IF sy-subrc <> 0.
              CLEAR:
              wa_outtab-matnr,
              wa_outtab-posnr,
              wa_outtab-zzitem_draw_no,
              wa_outtab-ojtxb,
              wa_outtab-ebort,
    *          wa_outtab-idnrk,
              wa_outtab-menge,
              wa_outtab-meins,
              wa_outtab-uposz,
              wa_outtab-upmng,
              wa_outtab-verpr,
              wa_outtab-stprs,
              wa_outtab-bwprh,
              wa_outtab-lifnr,                                 
              wa_outtab-name_sup,                              
              wa_outtab-potx1,                                 
              wa_outtab-potx2,                                 
              wa_outtab-netpr,                                 
              wa_outtab-peinh.                                 
              wa_outtab-mfrpn = wa_mara-mfrpn.
              wa_outtab-mfrnr = wa_mara-mfrnr.
              SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
              APPEND wa_outtab TO i_outtab.
            ENDIF.
          ENDIF.
          REFRESH i_stpu.
          CLEAR i_stpu.
        ENDLOOP.    CLEAR: wa_matnr1, wa_mfrnr, wa_outtab.
      ENDLOOP.
    Edited by: srinivasareddy j on Mar 9, 2011 7:16 AM
    Edited by: srinivasareddy j on Mar 9, 2011 7:20 AM

  • I can only print the current page of downloaded pdf's.  Not able to print "all".  I'm using a Macbook air.

    I can only print the current page of downloaded pdf's.  Not able to print "all".  I'm using a Macbook air.

    it says "the document could not be printed".  "There were no ages selected to print".
    I selected "all".  I always tried selecting pages "1-3".
    The only choice that works is current page.  Very strange.

  • Not able to see all the records thru RSA3.

    Hello All,
    I am checking 0VALUATION_TEXT extractor on R/3 using RSA3 Tcode.
    It is showing only 3 records.
    When I am loading this Text Master data through InfoPackage, the records were loaded from R/3 to PSA itself is 6.
    Why I am not able to see all the records in RSA3.
    Kindly Help me out in this.
    Thanks,
    Geetha

    Hi Geetha,
    Check the data, It seems loded data was 3 records for 2 languages.
    In RSA3 it is showing 3 records for EN language.
    Assign points if it helps...
    Regards,
    ARK

  • Well im not able to updated all the events I had in the imovie, HELP

    Well im not able to updated all the events I had in the imovie, HELP

    I have started preparing a small Database application
    using JDBC with Swing.
    I want to dispaly all the Table names which are
    present in the Access Data Source. When i used the
    Standard query for this "Select * from Tab" as in
    SQL, an eror saying that "not able to resolve symbol
    'Tab' ".
    Can anybody please help me out to display the table
    names?That query
    Select * from tabwould work only for Oracle, as far as I know. There is no system table called Tab in Access.
    ***Annie***

  • Users not able to see all the default reports in FDM under analysis

    All,
    Users in FDM are not able to see all the default reports which will be available under Analysis. I have checked the MenuNavigation and MenuNavigationItems under object maintainence in FDM which have "ALL" as the provisioning level. I am not sure where the issue is as the users still not able to see the reports. Please advise if there is something that can be done in workbench.
    Regards

    You can set security on Report folders in workbench.  You would go to the report tab in workbench, and right click on a Folder (Cannot do it on the individual report, it has to be on the folder), and you can assign security levels to the report folder.  There are some in here that default to the admin level but you can override it.
    Regards
    JTF

  • Not able to export all the rows into excel

    Hi All,
    I'm not able to export all the records in discoverer report to excel sheet.
    There are actually 27000 records in discoverer report, when i export them to excel sheet i can see only 16000 records.
    I'm using discoverer plus.
    Any suggestions...please share with me.
    Thanks in advance,

    Hi,
    Do you have parameters on the worksheet? if so then are you selecting same as when you ran it?
    What version are you using ? Plus? Viewer? Desktop?
    You can export the worksheet into CSV instead of XLS and see what you get.
    Also check other formats to see if this missing lines happen in all export methods or just the XLS.

Maybe you are looking for