11gr2 repository browser
In 11gr2 the web based repository browser is very slow.
Even with small data sets in the repository.
Any suggestions for tuning?
It can be anywhere where there is an OWB software installation, you run the service using the owb/bin/win32/startowbbinst or owb/bin/unix/startowbinst scripts.
See the section below for more details;
http://download.oracle.com/docs/cd/E11882_01/owb.112/e10935/auditing.htm#CHDBIBDG
Cheers
David
Similar Messages
-
OWB 11.2.0.1 – Repository Browser?
OWB 11.2.0.1 – Repository Browser?
==================================
We are using OWB 11gR2 and Oracle 11gR2.
We find design center reports and control center reports on main page. It look same for both options. What are the design center specific reports?
It shows Linage and Impacts are not supported. It was the same for earlier versions as well.
What is the reason behind providing Linage and Impacts here?
Any thoughts?
Thanks in helping
Edited by: qwe16235 on Sep 16, 2011 2:37 PMIt can be anywhere where there is an OWB software installation, you run the service using the owb/bin/win32/startowbbinst or owb/bin/unix/startowbinst scripts.
See the section below for more details;
http://download.oracle.com/docs/cd/E11882_01/owb.112/e10935/auditing.htm#CHDBIBDG
Cheers
David -
Error in starting OWB repository browser listener
Hi,
I got the following error when starting owb repository browser listener on Solaris with startOwbbInst.sh
Exception in thread "main" java.lang.NoClassDefFoundError: javax.servlet.Servlet
at com.evermind.server.ApplicationServer.class$(ApplicationServer.java:297)
at com.evermind.server.ApplicationServer.checkDependencies(ApplicationServer.java:297)
at com.evermind.server.ApplicationServer.launchCommandline(ApplicationServer.java:498)
at com.evermind.server.OC4JServer.launchOC4JCommandline(OC4JServer.java:171)
at com.evermind.server.OC4JServer.main(OC4JServer.java:306)
Is this caused by something with the configuration?
JeffreyHi ,
What is your OWB version ?
If it is 10.2 then read the following
With Warehouse Builder 10.2.0.X, the Repository Browser Listener is only supported on Windows x86-32bit and linux x86-32bit client machine.
So start the Warehouse Builder Repository Browser Listener on Windows/Linux x86-32bit client machine
For 11g refer MOS Note 469422.1
Thanks,
Sutirtha -
Problem starting Repository Browser Service on Windows Server 2008
Using the default Warehouse Builder installation in the 11g (11.1.0.7.0) databaseinstallation on a clean Windows Server 2008 64-bit installation.
Warehouse Builder installed and populated ok, OWB client works fine etc.
When trying to start the Repository Browser listener by running the startOwbbInst.bat, the OC4J container crashes with the following error in the \owb\j2ee\log\oc4j\log.xml:
+<MSG_TEXT>Could not create Secure http listener due to {0}</MSG_TEXT>+
+<SUPPL_DETAIL><![CDATA[java.io.FileNotFoundException: C:\Oracle\product\11.1.0\db_1\owb\bin\admin\..\..\j2ee\config\%ORACLE_HOME%\owb\j2ee\config\keystore.jks (The system cannot find the path specified)+
+ at java.io.FileInputStream.open(Native Method)+
+ at java.io.FileInputStream.<init>(FileInputStream.java:106)+
+ at java.io.FileInputStream.<init>(FileInputStream.java:66)+
+ at oracle.oc4j.security.OC4JSSLSocketFactory.getStoreIn(OC4JSSLSocketFactory.java:253)+
(The local_service_login.bat works fine).
We're starting this as an administrator user in Win2008.
All parameteres in the setowbenv.bat seems to be correct as far as I can tell. There is a strange reference to %ORACLE_HOME% in the above log, of which I've no idea where it is coming from....
Identical installation worked fine on a 64-bit Windows Server 2003, - so can this be something related to a new security model in Windows Server 2008?
(I found a posting regarding problems with the startOwbbInst.bat on Vista [here |http://forums.oracle.com/forums/thread.jspa?messageID=2275781�] - so maybe.... however, the quickfix mentioned there did'nt help us here...)
Anyone experienced similar problems (and preferably solved them) on Windows Server 2008 and/or Vista?
Regards,
-Haakon-Solved this after some trawling through xml configuration files on the server.
The file C:\Oracle\product\11.1.0\db_1\owb\j2ee\config\http-web-site.xml contains the reference to keystore.jks:
<ssl-config keystore="*%ORACLE_HOME%*/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
changing this to:
<ssl-config keystore="C:\Oracle\product\11.1.0\db_1/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
and the OC4J container starts successfully.
Regards,
-Haakon- -
Error when starting repository browser listener on Oracle Database
I have successfully installed oracle database 11g release2 (11.2.0.2.0). The associated Oracle Warehouse Builder 11g Release 2 (11.2.0.3.0) Standalone Software works fine, everything is ok.
Now I want to start Repository Browser. So, I must run the startowbbinst.bat file from directory oracle_home/owb/bin/win32 (oracle_home for oracle database ), but I receive this:
- call setowbenv.bat
*Error initializing server: Error initializing _logger for ../log/server.log: Access is denied*
Fatal error: server exiting
Please help me !!!!!!login to below url
http:/hostname:port/webdynpro/dispatcher/sap.com/com.sap.xi.adminweb/AdminApp
clcik on Java Web Start Administration and Click on Restore Archives
and refer below thread:
http://forums.sdn.sap.com/thread.jspa?threadID=1792753 -
Hi,
I use the Repository Browser to see the execution details when a mapping is in execution.
But the repository browser does not show the number of records inserted or updated, until the mapping
finishes its execution. This is happening in 10gR2.
Is there way , by which I can get the real time information of how many records got updated till now while the mapping execution is in progres.
Thanks
MDYou have to take into fact that you have a commit frequency, and max number of errors, if an error occurs it will probably rollback, you have operating mode, row based, set based, etc. you will probably not see your result until the execution is done.
-
OWB REPOSITORY BROWSER PROBLEM
I am new with owb and have a problem with that Warehouse Builder Browser.
At the first I start the OWB Browser Listener. That's ok.
Afterwards I start the Repository Browser AND login as repository owner. That's ok.
Now the problem: after I click any link, I come back again on the login PAGE. With the others links the same happens (such as Object Summary Report)
What is the problem??
I use Oracle 10gR1 and Warehouse Builder 10gR2
Please help me.
Thank you for answersHello,
I was also hit by the same and raised a SR. Here is the follow up --
Symptoms
========
One can log in OWB browser but after any navigation move, Browser returns to login page.
Cause
=====
According to development this is OC4J security bug which is specific to the OC4J version of I.E. on Windows 2000. This should work if with Netscape or with I.E. on Windows platforms after Windows 2000.
ANSWER
=======
- close the oc4j session (ctrl/c);
- in owb_home/owb/j2ee/config/owbb-web-site.xml
replace the line
<web-site port="8999" secure="true" display-name="OWB Browser Wed Site">
with
<web-site port="8999" display-name="OWB Browser Wed Site">
(removed secure = "true")
- save it;
- run the oc4j session again, make sure in the oc4j outputs you cannot see
"....unpacking owbb.war", just "initialized"
- do not use any command from the owb installations; open Netscape or IE and put
the URL with http not https, e.g.
http://127.0.0.1:8999/owbb/RABLogin.uix?mode=design
This had actually solved my problem.
Cheers,
Swagata -
There is no object in Repository Browser
Hi expert
there are two sap systems which are trial version, one is sap 640, the other is sap 700.
when I go to SE80 with user "BCUSER", there is no "Internet Service" in Repository Browser tab.
I want to create service by " internet service ".
is it because of trial version?
tons of thanks.
msonghi all,
perhaps it's because of IE7.0
but another problem is ,when I create a service, it says :may not make changes in customer system,BCUSER and DDIC only can choose "display object", can someone tell me the required authorization? I'm a pretty new, please tell me how to setting? thanks very much.
BR.
msong -
11gR2 repository in 11gR2 database
Hi,
is it possible to install a 11gR2 repository in a 10gR2 database?
I'm somewhat clueless about this since the repository software is not available standalone (i.e. not in the context of the 11gR2 database).
But there should be a way following the statement in the [ OTN download area for standalone client |http://www.oracle.com/technetwork/developer-tools/warehouse/downloads/software/index.html] :
To install OWB 11.2 and host an OWB repository on Oracle Database 10 g Release 2 or Oracle Database 11 g Release 1.
regards
ThomasHi Thomas
Yes you can do this, you will need the 11gR2 standalone software, go to the OWB OTN page here and click on Downloads, the OWB standalone software is here.
http://download.oracle.com/docs/cd/E11882_01/owb.112/e17130/install.htm#CHDGHDAI
Cheers
David -
OWB 10.2.0.1.31: Not be able to view reports on Repository Browser
Hello,
I not be able to show the list of execution mappings into owb repository browser. I get access to login page and i get access with runtime repository owner user, but repository browser don´t show the mapping execution list into execution report page.
In other installation od OWB the execution mapping's report showed correctly. I try to install into clean computer and not be able to get the result of execution mapping.
Any idea??
JaaquinI have exactly the same problem. Repository browser is working, I can see deployment reports. The execution reports are working but emtpy. Although the control center manager shows execution logs.
The problem appeared after I installed the last patch Warehouse Builder 10.2.0.4 Patch. Everything else seems to work normally.
The client version is 10.2.0.4.36
The repository version is 10.2.0.4.0
Can it be the difference between the repository and OWB browser versions?
Thanks,
Kaur -
Problem in starting repository browser on owb 11g
I have successfully installed oracle 11g release1. The associated Warehouse Builder works fine, everything is ok.
Now I want to start Repository Browser. So, I must run the startowbbinst.bat file from directory oracle_home/owb/bin/win32, but I receive this:
- call setowbenv.bat
- date and time - Error initializing server: Error initializing _logger for ../log/server.log: Access is denied
-date and time - Fatal error: server exitingSame issue for me too. Can you please tell me the solution for this issue.
-
HTTPSession lost in the Repository Browser
Hello,
we often lost the Session in the Repository Browser. If we use a link in the Browser the login screen appears often in a random manner.
The message in the oci4j window is:
07/10/02 13:26:43 data_source.getHttpSession: >>>>HttpSession lost or first time through : create new HttpSession
07/10/02 13:26:43 UserData.restoreData(...) new snapshot created - values reinitialized
07/10/02 13:26:43 data_source.restoreData(...) new snapshot created - values reinitialized
For a timeout the period is to short.
Does anybody know how we can debug the session. We don't why we lost the session.
Regards AlexanderI've experienced the exact same problem. I've was going to open a SR in metalink about it, but the last time I opened a SR, they told me I should wait until 10.2.0.3 is released since it has a lot of bug fixes in it. It's been three months and I am still waiting for the patch for Unix. So far, it is just one of many annoyances with 10.2.0.2. Wish they were faster about releasing patches.
If anyone has a workaround for this, I'd be interested in knowing.
Thanks. -
What is the source table for repository browser info?
Hi guys,
I need to create report for everyday's data refresh, mostly like what repository browser does. So what is the source table for repository browser info? I am in OWB 10gR2. Thanks a lot.I believe the runtime audit browser uses the views that start with "RAB" in the control center.
But it would probably better if you used the Audit Execution views. More information can be found in the "API and Scripting Reference" document...
http://download.oracle.com/docs/cd/B31080_01/doc/owb.102/b28225/api_2runviews.htm
In order to get access to the Public views from SQL Plus using a schema other than the control center, I believe you need to grant the ACCESS_PUBLICVIEW_BROWSER sys privilege to each OWB user. Look at Note:434718.1 for more information. -
How to enable the repository browser
Hi everyone
Can you please guide me to enable the repository browser in owb 11g. Should we access it from the server itself or can we access it from the client if so can u please provide me with the detail steps as to enable it? and should we enable it from the client or the server itself?
regards
SubhasreeYou can access the repositry browser from your client.
Under Adminstration in OWB in Start-Program. click on Start OWB Browser Listener.
Then click on OWB/Repository Browser
Login to your repository. -
Unable to open repository browser
I am unable to open the repository browser in oWB10g r2.
I clicked on start owb listener but still facing the problemHi,
I've just tried to do something like that but with owb11g and I had no problem
try to follow the steps on
http://www.oracle.com/technology/obe/10gr2_owb/owb10gr2_gs/owb/lesson6/loading-warehouse.htm#t4
it worked for me...
Regards
Maybe you are looking for
-
to start, I had first set up ical server and everything was working fine, I got all the delegates and shares up and working. it kept that way for a few days, then one day after I updated, everything went wrong. the server wouldn't connect to anything
-
Create multiple pages layout in Smartforms?
Hei guys, I need to create a Smartform which has two parts. The top portion will remain the same, but it could possibly be more then one page because of size of text. The second part will have different values but the size will always be the same. No
-
How to set a language from LTR to RTL in illustrator cs4
how to set a language from LTR to RTL in illustrator cs4.....plz help
-
FM to find user who locked the object using enqueue...
Hello, How can I find name of user who enqueued the lock object in ABAP ? Regards, Jainam.
-
Hi, why are the home and end keys in mail dont work? They dont bring me to the beginning/end of a line.