11gR2 win2008
hi all
is 11gR2 on windows 2008 available or not
because i am not able to get the link
thanks
Edited by: user12104101 on Nov 17, 2009 11:17 PM
hi,
currently 11g release2 for windows in not avaliable... upto 11.0.1.7.0 is only available for Windows
11g release 2 release dates:
HPUX Itanium, Sun Sparc/x86_64, AIX –> October - December 2009
Windows, HPUX Risc –> April - June 2010
http://www.oracle.com/technology/software/products/database/index.html
regards,
Deepak
Similar Messages
-
Hi,
We are planning to upgrade our databases running on oracle 9.2.0.8 / win2000 (32 bit) to 11gR2 /win2008 .
I have read many documents on metalink that talk about the upgrade methods and the execution.
We are currently in a planning phase and looking to do an impact analysis on the application. Is there any document that may refer to the database / OS changes that may have a direct / indirect impact on the applicaiton.
We have 2 applicatons. one is running on .net 2.0 and the other is written in vb 6.0 and asp.
Some of the doubts that we have are:
will the oracle client 9.2.0.8 running on win2000 communicate with the 11gR2 db on win2008 without any problems
Will the bitversion difference (32bit) app server vs (64 bit) db server be a problem ?
Are there any datatype changes that may require any change to the application?
I referred to the Oracle® Database
Upgrade Guide
11g Release 2 (11.2)
E17222-08
and it says that we can directly upgrade the database to 11gR2 without making any changes to the applicaiton if we do not intend to use any new features of 11gR2.
Any comments?
Regards,
MaddyHello,
Since this is not a Berkeley DB question you might find the Database - Upgrade forum
a better starting point:
Database Upgrade
Thank you,
Sandra -
Connection Problem to 11GR2 DB
Hi @all
i've installed 11gR2 X64 on a Windows Server 2008 R2 x64.
Now I try to connect to a Database on this Server with SQL Developer (Version 2.1.1.64.45)
ConnectionType is easy
I get the following error The network adapter could not establish the connection.
I have the same type of connection for a 11.1.0.7 Database which is running on a Windows Server 2008 x64 ... no problems
what is different for a connection to a 11gR2 DB?
Any ideas?Check if your service is register in listener:
lsnrctl status
I've install Oracle 11gR2 on Win2008 x64 few days ago and notice that after installation services aren't visible by listener. After adding SID_LIST_LISTENER clause to listener.ora and restarting listener everything was OK.
Check if you EM works as well... Probably you have to reconfigure it after installation, because it's corrupted. -
How to protect an application running on IIS with OAM 11gR2
Hello Gurus,
I have a question regarding protecting an application running on IIS with OAM 11gR2. We have an OHS server running and all the requests from the users are coming to this OHS server webgate for them to login using the SSO login page. These is all solaris. I am protecting other applications like pplsoft moduels with this OHS instance and OAM server. There is another application that I need to protect which is itself running on IIS windows machine. I need guidance as to -
1.) Do I need to install a windows version of webgate to protect this IIS based application?
2.) Or I can still protect and proxy requests from this application to current OHS instance? How can I do this?
3.) Or Do I need to proxy requests directly from IIS to OAM weblogic server?
Please advise to the earliest as this is an urgent issue.
Thanks !!From your description it is not clear how exactly architecture looks like
We have an OHS server running and all the requests from the users are coming to this OHS server webgate for them to login using the SSO login page.
is this OHS centralized login farm ? (Case 1)
OR is this OHS server (with webgate) acting as virtual web server hosting multiple web sites so that request to any site passes through this OHS/webgate (Case 2)
1.) Do I need to install a windows version of webgate to protect this IIS based application?
If case 1 then you need to install 10g webgate on top of IIS server to protect this application
If case 2 then you can just proxy request from OHS to IIS server. As every request passes through OHS user will be authenticated before request hits IIS
Look at Product documentation for virtual web sites : http://docs.oracle.com/cd/E27559_01/admin.1112/e27239/shared.htm#autoId12
It has steps to protect virtual web sites.
Also you need to make sure no one hits IIIS web sites directly.
Hope this helps -
Error while running root.sh in 11GR2 2 node cluster
Hi Friends,
I am trying to setup 11gR2 2 node RAC on RHEL 4.7. The cluvfy script shows everything as passed and grid infrastructure installation completes fine until I ran root.sh script. The root.sh script when run on node 1 exits with following error in console
DOCRAC1-N310 []:./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:>ORACLE_OWNER= oracle
>ORACLE_HOME= /app/oracle/grid
>
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y>Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y>Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y>Copying coraenv to /usr/local/bin ...
>
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2011-01-06 13:20:18: Parsing the host name
2011-01-06 13:20:18: Checking for super user privileges
2011-01-06 13:20:18: User has super user privileges
Using configuration parameter file: /app/oracle/grid/crs/install/crsconfig_params
PROTL-16: Internal Error
Command return code of 41 (10496) from command: /app/oracle/grid/bin/ocrconfig -local -upgrade oracle oinstall
Failed to create or upgrade OLRWhen I checked the logs in $GRID_HOME/log/<Node1>/client
I can see errors in ocrconfig_12426.log as
Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2011-01-06 13:20:19.133: [ OCRCONF][2564297536]ocrconfig starts...
2011-01-06 13:20:19.134: [ default][2564297536]utgdv: Could not find occonfig_loc property or ocrconfig_loc pointing to nothing
[ OCRCONF][2564297536]Error retrieving OCR configuration. Return [4]. procr_get_conf rc [41] error buffer [Error retrieving ocrconfig_loc property.]
2011-01-06 13:20:19.134: [ OCRCONF][2564297536]Error [4] retrieving configuration type
2011-01-06 13:20:19.134: [ OCRCONF][2564297536]Exiting [status=failed]...and in crsctl.log
[ CRSCTL][2566642592]Command::initStatic: clsugetconf failed with return code 4, status 1
2011-01-06 13:19:01.372: [ CRSCTL][2566642592]Command::checkConfig: clsugetconf returned unknown status
2011-01-06 13:19:11.502: [ default][2566642592]utgdv: Could not find occonfig_loc property or ocrconfig_loc pointing to nothing
[ default][2566642592]Error retrieving OCR configuration. Return [4]. procr_get_conf rc [41] error buffer [Error retrieving ocrconfig_loc property.]
[ CRSCTL][2566642592]Command::initStatic: clsugetconf failed with return code 4, status 1
2011-01-06 13:19:11.503: [ CRSCTL][2566642592]Command::checkConfig: clsugetconf returned unknown statusI have tried to deinstall, reconfigure , but still no luck. I will be trying to use Oracle Deinstall utlity now. Before that I would like to get comments from experts
Thanks ,
SSN.Consider moving this question to the Real Application Clusters forum.
Confirm that +/app/oracle/grid/crs/install/crsconfig_params+ exists before running root.sh - if it does, please post contents using tags to encapsulate the config text data.
Are you using ASM for managing voting and OCR disk storage, or are you manually setting these to specific block devices? -
How to install 11gR2 RAC on 64 bit linux OS
I am completely new to this topic of RAC and need to be installing and standing up RAC on Linux 64 bit OS . I have good knowledge of installing oracle database ENTERPRISE version 11gR2.
Can you guide me as to how to start. I am looking for leads. Probably we will have 2 nodes.
Thank you very much for helping me in advanceIf you are a My Oracle Support (Metalink) user, go check out these two notes created by the Oracle RAC Assurance Team. They are excellent.
NOTE: 810394.1 RAC Assurance Support Team: RAC Starter Kit and Best Practices (Generic)
NOTE: 811306.1 RAC Assurance Support Team: RAC Starter Kit (Linux)
In the Linux note mentioned above there is a link to a Linux Step by Step Instruction Guide. This step by step instruction guide is the best start to finish document I've seen for how to set-up and install Oracle RAC. I believe the guide is written for installing release 11.2.0.2. -
OWB 11gR2 - Internal ERROR: Can not find the ACL containter
OWB 11gR2 - Internal ERROR: Can not find the ACL containter
=======================================
I am using OWB 11gR2 (11.2.0.1) on Win XP 32 bit. I have 3.23 GB RAM. OWB design center is ver slow on my desktop. We have our OWB repository is on Unix server.
We applied the patch 10270220.
We are getting
Internal ERROR: Can not find the ACL containter for object:CMPPhysicalMap@19654/id=104020/owningFCO=104020/proxyFor=(CMPPhysicalMapGen@19f99ae/id=104020/stname=null/pname=MAPPING_1/lname=MAPPING_1/status=POSTED/committed=true/persistent=true/propsLoaded=true)
What is happening here?
Thanks in helping.We have a map with 3 sources and 1 target. The 3 sources pass through Joiner then Expression then Target.
We are getting this error, during deployment. It shows compling for awhile, then through this error.
Here is the piece from detail window:
===========
at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:174)
at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2806)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:914)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1542)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:694)
at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:959)
at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:924)
at oracle.wh.repos.pdl.dispatcher.EventDispatcherImpl.beforeReadObject(EventDispatcherImpl.java:824)
at oracle.wh.repos.pdl.foundation.OWBRoot.beforeRead(OWBRoot.java:1785)
at oracle.wh.repos.owbGen.CMPStringPropertyValueGen.getValue(CMPStringPropertyValueGen.java:217)
at oracle.wh.repos.impl.properties.CMPStringPropertyValue.getValue(CMPStringPropertyValue.java:117)
at oracle.wh.repos.impl.extended.PropertyFactory.getStringValue(PropertyFactory.java:440)
at oracle.wh.repos.impl.extended.CMPWBPrimitiveProperty.rawStringValue(CMPWBPrimitiveProperty.java:260)
at oracle.wh.repos.sdk.mapping.WBMapHelper.getStringProperty(WBMapHelper.java:716)
at oracle.wh.repos.sdk.mapping.WBMapHelper.getStringProperty(WBMapHelper.java:733)
at oracle.wh.repos.sdk.mapping.WBMapHelper.getReferencedLocations(WBMapHelper.java:1361)
at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:284)
at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:141)
at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:135)
at oracle.wh.service.impl.runtime.RuntimePlatformServiceImpl.getReferencedLocations(RuntimePlatformServiceImpl.java:1238)
at oracle.wh.ui.runtime.application.WHRuntimeCommandUtil.addConnectorLocations(WHRuntimeCommandUtil.java:477)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.getSingleDeployLocations(WHRuntimeCommandGenerateDeploy.java:3408)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.getLocationsAndNewConnectors(WHRuntimeCommandGenerateDeploy.java:3517)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.doPreDeploymentActions(WHRuntimeCommandGenerateDeploy.java:3224)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy._internalDeploy(WHRuntimeCommandGenerateDeploy.java:2420)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.doDeploymentAsynch(WHRuntimeCommandGenerateDeploy.java:2117)
at oracle.wh.ui.runtime.application.WHRuntimeCommandHandler$1.construct(WHRuntimeCommandHandler.java:1005)
at oracle.wh.ui.runtime.SwingWorker$2.run(SwingWorker.java:124)
at java.lang.Thread.run(Thread.java:595)
===========
Did anyone receive such errors? -
Question: 10gR2 database can not see the 11gR2 ASM diskgroup?
Hi there,
env:
uname -rm
2.6.18-92.1.22.el5xen x86_64
Single server(non-RAC)
note: we don't want to upgrade 10gr2 database into 11gR2 yet. But we created the 11gR2 ASM, then a 11gr2 database on ASM, and plan to migrate datafile in 10gR2 database to 11gR2 ASM
1. oracle 10gR2 installed first version: 10.2.0.3.0
2. then install 11gR2 Grid Infrastructure, and created ASM (version 11gr2)
$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Tue Oct 19 10:30:56 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
SQL> col name form a15
SQL> col COMPATIBILITY form a15
SQL> col DATABASE_COMPATIBILITY form a15
SQL> l
1* select name , STATE, COMPATIBILITY, DATABASE_COMPATIBILITY from v$asm_diskgroup
SQL> /
NAME STATE COMPATIBILITY DATABASE_COMPAT
ORCL_DATA1 MOUNTED 11.2.0.0.0 10.1.0.0.0
ORA_DATA MOUNTED 10.1.0.0.0 10.1.0.0.0
3. in 10gR2 database
sqlplus /
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Oct 19 12:12:31 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning and Data Mining options
SQL> select * from v$asm_diskgroup;
no rows selected
4. pin the node into css
# /u01/app/product/11.2.0/grid/bin/crsctl pin css -n mynodename
CRS-4000: Command Pin failed, or completed with errors.
Question: 10gR2 database can not see the 11gR2 ASM diskgroup?
please help
Thanks
ScottWhat is the output of
olsnodes -t -n
Also, see unix error log and ohasd error log if you find anything in that -
Issue JDBC connection pool with Glassfish 3.1.2.2 and Oracle XE 11gR2
Hello,
I am experiencing an issue with pinging a JDBC connection Pool.
I installed the following without any warnings or errors:
Operating System: Oracle Enterprise Linux 5
Oracle XE 11gR2 (11.2.0.2.0) database
Glassfish 3.1.2.2
I will refer to the steps I did after the installations
1) In the .profile file of the OS I add the following:
JRE_HOME=/usr/java/jre1.6.0_31; export JRE_HOME
JAVA_HOME=/usr/java/jdk1.6.0_31; export JAVA_HOME
GLASSFISH_DIR=/u01/glassfish3
GLASSFISH_HOME=/u01/glassfish3/glassfish
DERBY_HOME=$GLASSFISH_DIR/javadb
OPEN_MQ_HOME=$GLASSFISH_DIR/mq
PATH=:$JAVA_HOME/bin:$JRE_HOME/bin:$PATH:$HOME/bin:$GLASSFISH_HOME/bin:$DERBY_HOME/bin:$OPEN_MQ_HOME/bin
export GLASSFISH_HOME
export DERBY_HOME
export OPEN_MQ_HOME
export PATH
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/xe/lib; export LD_LIBRARY_PATH
. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh
2) I copied the ojdbc6.jar to the $GLASSFISH_HOME/domains/domain1/lib
3) I login to the Glassfish admin console and created a new JDBC Connection Pool.
Pool Name: ds_orasys
Resource Type: javax.sql.DataSource
Datasource Classname: oracle.jdbc.pool.OracleDataSource
User: [myschema]
Password: [myschema password]
URL: jdbc:oracle:thin:@localhost:1521:xe
When I ping the connection pool I get the following message in the server log:
[#|2012-10-23T12:14:37.069+0300|WARNING|glassfish3.1.2|javax.enterprise.resource.resourceadapter.com.sun.enterprise.connectors.service|_ThreadID=22;_ThreadName=Thread-2;|RAR8054: Exception while creating an unpooled [test] connection for pool [ ds_orasys ], Connection could not be allocated because: Invalid Oracle URL specified|#]
[#|2012-10-23T12:14:37.071+0300|SEVERE|glassfish3.1.2|org.glassfish.admingui|_ThreadID=19;_ThreadName=Thread-2;|RestResponse.getResponse() gives FAILURE. endpoint = 'http://212.205.62.217:4848/management/domain/resources/ping-connection-pool.json'; attrs = '{id=ds_orasys}'|#]
I tried to use different jar files. I used ojdbc6dms.jar and ojdbc14.jar.
I also copied the jar files in the $GLASSFISH_HOME/domains/domain1/lib/ext directory as some people suggested. Still no luck. I keep getting the same error messages in the server.log
Can anybody help me out or point me to the right direction.
Thank you in advanceThe error is in the URL. It was in front of my eyes and I couldn't see the error. I skipped the ':' before the '@' when I created the pool. It is working fine now.
-
How to protect an application running on Apache Tomcat app server with OAM 11gR2
Gurus,
We have an Apache Tomcat based application named "ABCD" here at client site that we want OAM 11gR2 PS1 to integrate with for SSO purposes. I have successfully configured OHS to reverse proxy requests to Apache Tomcat server whenever somebody tries to access the application URL but still, I am getting the application login page once I have successfully authenticated on OAM SSO login page. The Tomcat based application is authenticating users against a "UserDatabase realm".
I know in terms of weblogic application, there is an OAM identity asserter provider which then populates the User Principal for the java environment with the authenticated OAM user. But there is no such OAM identity provider for Tomcat.
So my question is, is there an provider (or Tomcat equivalent) which will entrust authentication to a header, that could be used to populate the Java User Principal from the OAM_REMOTE_USER header? Is the weblogic equivalent of authentication providers present in tomcat as well? Are those called valves?
Please advise to the earliest.
Thanks !!Aakash,
I did follow the 4 steps that you mentioned to me. Out of the 4 that you had mentioned, I already had the webgate in place on OHS server and I was already passing the remote_user http header in oam policy as action.
As part of Step #2: Install mod_jk plugin on OHS server that you mentioned
1.) I downloaded the tomcat connector - tomcat-connectors-1.2.37-src
2.) I had to run ./configure,make, make install on my OHS server which runs on RHEL 6. It created the mod_jk.so file. I pasted it in the needed folder.
3.) I then created the httpd.conf file and workers.properties file as said in the connector docs.
4.) Restarted OHS.
As part of Step #3: Configure tomcat's ajp connector that you mentioned and I went through all the links pasted below but didn't find actually what needs to be in place to configure tomcat's ajp connector. I do see in the server.xml of tomcat app server that the ajp 1.3 protocol is supported:
http://tomcat.apache.org/tomcat-4.0-doc/config/ajp.html
http://tomcat.apache.org/tomcat-3.3-doc/mod_jk-howto.html#s8
http://tomcat.apache.org/tomcat-7.0-doc/config/ajp.html
http://www.mulesoft.com/understanding-tomcat-connectors
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Documentation at :
Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)
Java AJP Connector: /docs/config/ajp.html
APR (HTTP/AJP) Connector: /docs/apr.html
Define a non-SSL HTTP/1.1 Connector on port 8080
-->
<Connector port="8080" protocol="HTTP/1.1"
connectionTimeout="20000"
redirectPort="8443" />
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
Do we need to disable the HTTP protocol in Tomcat and keep only AJP connector enabled? If yes, how to do that?
I am trying to connect to the application from OHS server like so I am using the http protocal right? How should I use the ajp protocol to connect to tomcat application?
http://ohs-host:ohs-port/abcd
Thanks !!!!! -
APEX Listener with APEX 3.0 on 11gR2
Yes, I am crazy.
We have many many APEX applications in APEX 3.0 running on a 10.2.0.4 database that needs desperately to be upgraded. As a test, I've set up a clean 11gR2 database and copied the production APEX database into it via datapump. I set up APEX Listener, as I don't have any OAS sitting around and the EPG doesn't seem to be supported for APEX 3.0... the Listener doesn't say one way or the other.
When trying to log in, I get the login page, but it tries to reference files such as apex_get_3_1.js while I only have files such as htmldb_get.js in my images directory in production. I noticed it is looking for what appears to be 3.1 files instead of 3.0 files... which concerns me.
The APEX listener appears to be more than just a Java PL/SQL gateway.
Is there a minimum version of APEX the APEX Listener supports?
Interested in pointers!
RobHi Rob,
Yes, I am crazy.Why would that be? ;)
We have many many APEX applications in APEX 3.0 running on a 10.2.0.4 database that needs desperately to be upgraded. As a test, I've set up a clean 11gR2 database and copied the production APEX database into it via datapump. I set up APEX Listener, as I don't have any OAS sitting around and the EPG doesn't seem to be supported for APEX 3.0... the Listener doesn't say one way or the other.APEX 3.0 is supprted by EPG. See the [url http://docs.oracle.com/cd/B32472_01/doc/install.300/b32468/post_inst.htm#CHDBEJDA]APEX 3.0 Installation Guide for details.
APEX Listener is capable of hosting APEX 3.0 as well, though APEX 3.0 wasn't supported anymore when APEX Listener was initially released. The current APEX release at that time was 4.0, so this would be the first version to be known as really stable, whereas you won't get any support for older releases anymore. From personal experience I know that there are now issues with APEX 3.1 and APEX Listener, so it'll probably also work with 3.0.
Concerning your database release, the minimum for APEX Listener is 10.2.0.3, so you're definetly safe on that part, though I'd recommend to upgrade as regular support for 10.2 databases ended.
When trying to log in, I get the login page, but it tries to reference files such as apex_get_3_1.js while I only have files such as htmldb_get.js in my images directory in production. I noticed it is looking for what appears to be 3.1 files instead of 3.0 files... which concerns me.This indicates that your APEX would actually be a 3.1 and you should update you images directory.
The APEX listener appears to be more than just a Java PL/SQL gateway.It is, but this has nothing to do with your 3.1 JS files, if this is why you stated this.
Is there a minimum version of APEX the APEX Listener supports?As mentioned above, 4.0 would be a safe approach, but 3.1 will definetly work, 3.0 probably will as well. I'd recommend you find out which APEX version is actually installed on your database before you consider any upgrade operations. Run the following query as privileged user:
SELECT comp_name, version, status
FROM dba_registry
WHERE comp_id = 'APEX';-Udo -
Installation of Oracle 11gR2 in suse 12.1
Hi,
I recently installed the the linux Open suse 12.1, I have only one os in my pc. Now i want to install Oracle, can any one help me how to install and what are the packages to install before installation of oracle and where can i get those package.
One more point is I am newly to the linux, I dont know anything about this linux, Just 2 days before i installed the os. Can any one help me for this query
Thanks and regards,
G.ManikantaHow many PC's and OS's do you have ;-) Installation of oracle 11gR2 in fedora 16
Supported OS versions are listed in the Install Doc - http://docs.oracle.com/cd/E11882_01/install.112/e24321/pre_install.htm#CIHFICFD
If you insist on using an unsupported OS, you are on your own.
HTH
Srini -
Oracle Client 11gR2 installation issue on RHEL v5.4 64-bit
Hi,
I am trying to install Oracle Client software 11gR2 on RHEL v5.4 64-bit. I have resolved all the libraries dependency as well as Kernel changes as suggested by the installer. The error in the log file is as attached. At present I have "skipped" this error and proceeded with installation.
While installing the client, the installer fails while configuring the Net CA with error:
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: #
INFO: # An unexpected error has been detected by HotSpot Virtual Machine:
INFO: #
INFO: # SIGSEGV (0xb) at pc=0xe5e97498, pid=27377, tid=4160075984
INFO: #
INFO: # Java VM: Java HotSpot(TM) Client VM (1.5.0_17-b02 mixed mode)
INFO: # Problematic frame:
INFO: # C [libnnz11.so+0x3c498]
INFO: #
INFO: # An error report file with more information is saved as hs_err_pid27377.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: # http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
WARNING: /home/oracle/app/oracle/product/11.2.0/client_1/bin/netca: line 178: 27377 Aborted $JRE $JRE_OPTIONS -classpath $CLASSPATH oracle.ne
t.ca.NetCA $*
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
Also when I invoke the SQL Client; sqlplus user@db and enter the password, the sqlplus exits without any error and returns to the terminal console. Please note earlier I has getting a SELinux violation and have changed it to "permissive" mode
Please let me know how to resolve NetCA installation and the sqplus issue.
Thanks & regards,
VinayHi,
Thet NetCA error occurs during installation and I believe the installer should take care of the ORACLE_HOME variable setting.
But before invoking sqlplus I have set the ORACLE_HOME and LD_LIBRARY_PATH setting in the .bash_profile as mentioned in the installation guide. The snippet of the profile file is:
export ORACLE_HOME=~/app/oracle/product/11.2.0/client_1
export JAVA_HOME=$ORACLE_HOME/jdk
export PATH=$ORACLE_HOME/bin:$JAVA_HOME/bin:$PATH;
export LD_LIBRARY_PATH=$ORACLE_HOME:$LD_LIBRARY_PATH
export TNS_ADMIN=$ORACLE_HOME/network/admin
export TWO_TASK=mmcoedb
I am able to tnsping to the server/service name too but when I try to login using the user/password using sqlplus, it simply exits without any error.
Please let me know how to resolve the error.
Best regards,
Vinay -
11gR2 Grid Infrastucture Installation Problem on HP-UX 11.31
While installing Oracle 11gR2 Grid Infrastructure on HP-UX 11.31 it is giving error message
INS-06006: Passwordless SSH connectivity not set up between the following node(s),
but manually it is working fine from both nodes.
What to do now, any suggestion from anybody.I had the same issue today, it took me 30 minutes to figure out how to solve it.
I had a script called by .bashrc that was setting Oracle variables and doing Echos to have a nice login prompt.
For some reason, the SSH Connectivity created a directory with the banner (!!) sounds crazy, but when i removed those files, started again, it went through.
I'd say, whenever you install this software, do not init Oracle specific environmental variables such as ORACLE_HOME, ORACLE_SID, etc.
If it still doesn't work, check Oracle Note: *How to Validate Network and Name Resolution Setup for the Clusterware and RAC [ID 1054902.1]*
Hope this helps.
JB -
11gR2 clusterware installation problem on root.sh script on second node
Hi all,
I wanna install the *11gR2 RAC* on ORA-Linux 5.5 (x86_64) using VMware server but on the second node i get two "*failed*" at the end of root.sh script.
After that i try to install DB but ı can see only one node.What is the problem...
I will send the output, ı need your help.
Thank you all for helping..
Hosts file:(we have no ping problem )
[root@rac2 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
# Public
192.168.2.101 rac1.localdomain rac1
192.168.2.102 rac2.localdomain rac2
# Private
192.168.0.101 rac1-priv.localdomain rac1-priv
192.168.0.102 rac2-priv.localdomain rac2-priv
# Virtual
192.168.2.111 rac1-vip.localdomain rac1-vip
192.168.2.112 rac2-vip.localdomain rac2-vip
# SCAN
192.168.2.201 rac-scan.localdomain rac-scan
[root@rac2 ~]#
FIRST NODE root.sh script output...
[root@rac2 ~]# /u01/app/11.2.0/db_1/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2.0/db_1
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-12-06 14:45:06: Parsing the host name
2010-12-06 14:45:06: Checking for super user privileges
2010-12-06 14:45:06: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/db_1/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'rac2'
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac2'
CRS-2676: Start of 'ora.gipcd' on 'rac2' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac2'
CRS-2676: Start of 'ora.gpnpd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac2'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac2'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac2'
CRS-2676: Start of 'ora.diskmon' on 'rac2' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac2'
CRS-2676: Start of 'ora.ctssd' on 'rac2' succeeded
ASM created and started successfully.
DiskGroup DATA created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'rac2'
CRS-2676: Start of 'ora.crsd' on 'rac2' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk 587cc69413ce4fd3bf0c2c2548fb9017.
Successfully replaced voting disk group with +DATA.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 587cc69413ce4fd3bf0c2c2548fb9017 (/dev/oracleasm/disks/DISK1) [DATA]
Located 1 voting disk(s).
CRS-2673: Attempting to stop 'ora.crsd' on 'rac2'
CRS-2677: Stop of 'ora.crsd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'rac2'
CRS-2677: Stop of 'ora.asm' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'rac2'
CRS-2677: Stop of 'ora.ctssd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'rac2'
CRS-2677: Stop of 'ora.cssdmonitor' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'rac2'
CRS-2677: Stop of 'ora.cssd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'rac2'
CRS-2677: Stop of 'ora.gpnpd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'rac2'
CRS-2677: Stop of 'ora.gipcd' on 'rac2' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'rac2'
CRS-2677: Stop of 'ora.mdnsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac2'
CRS-2676: Start of 'ora.mdnsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'rac2'
CRS-2676: Start of 'ora.gipcd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac2'
CRS-2676: Start of 'ora.gpnpd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac2'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac2'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac2'
CRS-2676: Start of 'ora.diskmon' on 'rac2' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac2'
CRS-2676: Start of 'ora.ctssd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac2'
CRS-2676: Start of 'ora.asm' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'rac2'
CRS-2676: Start of 'ora.crsd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'rac2'
CRS-2676: Start of 'ora.evmd' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac2'
CRS-2676: Start of 'ora.asm' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.DATA.dg' on 'rac2'
CRS-2676: Start of 'ora.DATA.dg' on 'rac2' succeeded
CRS-2672: Attempting to start 'ora.registry.acfs' on 'rac2'
CRS-2676: Start of 'ora.registry.acfs' on 'rac2' succeeded
rac2 2010/12/06 14:52:06 /u01/app/11.2.0/db_1/cdata/rac2/backup_20101206_145206.olr
Configure Oracle Grid Infrastructure for a Cluster ... succeeded
Updating inventory properties for clusterware
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500 MB. Actual 6847 MB Passed
The inventory pointer is located at /etc/oraInst.loc
The inventory is located at /u01/app/oraInventory
'UpdateNodeList' was successful.
[root@rac2 ~]#
SECOND NODE root.sh script output
[root@rac1 db_1]# ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2.0/db_1
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-12-06 14:54:11: Parsing the host name
2010-12-06 14:54:11: Checking for super user privileges
2010-12-06 14:54:11: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/db_1/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'rac1'
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac1'
CRS-2676: Start of 'ora.gipcd' on 'rac1' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac1'
CRS-2676: Start of 'ora.gpnpd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac1'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac1'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac1'
CRS-2676: Start of 'ora.diskmon' on 'rac1' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac1'
CRS-2676: Start of 'ora.ctssd' on 'rac1' succeeded
ASM created and started successfully.
DiskGroup DATA created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'rac1'
CRS-2676: Start of 'ora.crsd' on 'rac1' succeeded
Successful addition of voting disk 2761ce8d47b44fbabf73462151e3ba1d.
Successfully replaced voting disk group with +DATA.
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 2761ce8d47b44fbabf73462151e3ba1d (/dev/oracleasm/disks/DISK1) [DATA]
Located 1 voting disk(s).
CRS-2673: Attempting to stop 'ora.crsd' on 'rac1'
CRS-2677: Stop of 'ora.crsd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 'rac1'
CRS-2677: Stop of 'ora.asm' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'rac1'
CRS-2677: Stop of 'ora.ctssd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'rac1'
CRS-2677: Stop of 'ora.cssdmonitor' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'rac1'
CRS-2677: Stop of 'ora.cssd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'rac1'
CRS-2677: Stop of 'ora.gpnpd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'rac1'
CRS-2677: Stop of 'ora.gipcd' on 'rac1' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'rac1'
CRS-2677: Stop of 'ora.mdnsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac1'
CRS-2676: Start of 'ora.mdnsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'rac1'
CRS-2676: Start of 'ora.gipcd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac1'
CRS-2676: Start of 'ora.gpnpd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac1'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac1'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac1'
CRS-2676: Start of 'ora.diskmon' on 'rac1' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac1'
CRS-2676: Start of 'ora.ctssd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac1'
CRS-2676: Start of 'ora.asm' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'rac1'
CRS-2676: Start of 'ora.crsd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'rac1'
CRS-2676: Start of 'ora.evmd' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac1'
CRS-2676: Start of 'ora.asm' on 'rac1' succeeded
CRS-2672: Attempting to start 'ora.DATA.dg' on 'rac1'
CRS-2676: Start of 'ora.DATA.dg' on 'rac1' succeeded
PRCR-1079 : *Failed* to start resource ora.scan1.vip
CRS-5005: IP Address: 192.168.2.201 is already in use in the network
CRS-2674: Start of 'ora.scan1.vip' on 'rac1' *failed*
CRS-2632: There are no more servers to try to place resource 'ora.scan1.vip' on that would satisfy its placement policy
start scan ... *failed*
Configure Oracle Grid Infrastructure for a Cluster ... *failed*
Updating inventory properties for clusterware
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500 MB. Actual 6847 MB Passed
The inventory pointer is located at /etc/oraInst.loc
The inventory is located at /u01/app/oraInventory
'UpdateNodeList' was successful.
[root@rac1 db_1]# * "./runcluvfy.sh stage -pre -crsinst -n rac1,rac2 " outputs are same each node....*
[oracle@rac2 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "rac2"
Checking user equivalence...
User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Verification of the hosts config file successful
Node connectivity passed for subnet "192.168.2.0" with node(s) rac2,rac1
TCP connectivity check passed for subnet "192.168.2.0"
Node connectivity passed for subnet "192.168.122.0" with node(s) rac2,rac1
TCP connectivity check failed for subnet "192.168.122.0"
Node connectivity passed for subnet "192.168.0.0" with node(s) rac2,rac1
TCP connectivity check passed for subnet "192.168.0.0"
Interfaces found on subnet "192.168.2.0" that are likely candidates for VIP are:
rac2 eth0:192.168.2.102 eth0:192.168.2.112 eth0:192.168.2.201
rac1 eth0:192.168.2.101 eth0:192.168.2.111
Interfaces found on subnet "192.168.122.0" that are likely candidates for a private interconnect are:
rac2 virbr0:192.168.122.1
rac1 virbr0:192.168.122.1
Interfaces found on subnet "192.168.0.0" that are likely candidates for a private interconnect are:
rac2 eth1:192.168.0.102
rac1 eth1:192.168.0.101
Node connectivity check passed
Total memory check passed
Available memory check passed
Swap space check passed
Free disk space check passed for "rac2:/tmp"
Free disk space check passed for "rac1:/tmp"
User existence check passed for "oracle"
Group existence check passed for "oinstall"
Group existence check passed for "dba"
Membership check for user "oracle" in group "oinstall" [as Primary] passed
Membership check for user "oracle" in group "dba" passed
Run level check passed
Hard limits check passed for "maximum open file descriptors"
Soft limits check passed for "maximum open file descriptors"
Hard limits check passed for "maximum user processes"
Soft limits check passed for "maximum user processes"
System architecture check passed
Kernel version check passed
Kernel parameter check passed for "semmsl"
Kernel parameter check passed for "semmns"
Kernel parameter check passed for "semopm"
Kernel parameter check passed for "semmni"
Kernel parameter check passed for "shmmax"
Kernel parameter check passed for "shmmni"
Kernel parameter check passed for "shmall"
Kernel parameter check passed for "file-max"
Kernel parameter check passed for "ip_local_port_range"
Kernel parameter check passed for "rmem_default"
Kernel parameter check passed for "rmem_max"
Kernel parameter check passed for "wmem_default"
Kernel parameter check passed for "wmem_max"
Kernel parameter check passed for "aio-max-nr"
Package existence check passed for "make-3.81"
Package existence check passed for "binutils-2.17.50.0.6"
Package existence check passed for "gcc-4.1.2"
Package existence check passed for "libaio-0.3.106 (i386)"
Package existence check passed for "libaio-0.3.106 (x86_64)"
Package existence check passed for "glibc-2.5-24 (i686)"
Package existence check passed for "glibc-2.5-24 (x86_64)"
Package existence check passed for "compat-libstdc++-33-3.2.3 (i386)"
Package existence check passed for "compat-libstdc++-33-3.2.3 (x86_64)"
Package existence check passed for "elfutils-libelf-0.125 (x86_64)"
Package existence check passed for "elfutils-libelf-devel-0.125"
Package existence check passed for "glibc-common-2.5"
Package existence check passed for "glibc-devel-2.5 (i386)"
Package existence check passed for "glibc-devel-2.5 (x86_64)"
Package existence check passed for "glibc-headers-2.5"
Package existence check passed for "gcc-c++-4.1.2"
Package existence check passed for "libaio-devel-0.3.106 (i386)"
Package existence check passed for "libaio-devel-0.3.106 (x86_64)"
Package existence check passed for "libgcc-4.1.2 (i386)"
Package existence check passed for "libgcc-4.1.2 (x86_64)"
Package existence check passed for "libstdc++-4.1.2 (i386)"
Package existence check passed for "libstdc++-4.1.2 (x86_64)"
Package existence check passed for "libstdc++-devel-4.1.2 (x86_64)"
Package existence check passed for "sysstat-7.0.2"
Package existence check passed for "unixODBC-2.2.11 (i386)"
Package existence check passed for "unixODBC-2.2.11 (x86_64)"
Package existence check passed for "unixODBC-devel-2.2.11 (i386)"
Package existence check passed for "unixODBC-devel-2.2.11 (x86_64)"
Package existence check passed for "ksh-20060214"
Check for multiple users with UID value 0 passed
Current group ID check passed
Core file name pattern consistency check passed.
User "oracle" is not part of "root" group. Check passed
Default user file creation mask check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
NTP Configuration file check passed
Checking daemon liveness...
Liveness check passed for "ntpd"
NTP daemon slewing option check passed
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
Check of common NTP Time Server passed
Clock time offset check from NTP Time Server started...
Clock time offset check passed
Clock synchronization check using Network Time Protocol(NTP) passed
Pre-check for cluster services setup was successful.
[oracle@rac2 grid]$ I'm confused :)
Edited by: Eren GULERYUZ on 06.Ara.2010 05:57Hi,
it looks like, that your "shared device" you are using is not really shared.
The second node does "create an ASM diskgroup" and create OCR and Voting disks. If this indeed would be a shared device, he should have recognized, that your disk is shared.
So as a result your VMware configuration must be wrong, and the disk you presented as shared disk is not really shared.
Which VMWare version did you use? It will not work correctly with the workstation or player edition, since shared disks are only really working with the server version.
If you indeed using the server, could you paste your vm configurations?
Furthermore I recommend using Virtual Box. There is a nice how-to:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
Sebastian
Maybe you are looking for
-
ERROR -WHILE LOADING MATERIAL MASTER FROM A FLAT FILE
HI GUYS , I AM TRYING TO CREATE MATERIAL MASTER FROM A FROM FLAT FILE IAM GETTIGN AN ERROR MESSAGE 'YOU HAVE NOT FULLY MAINTAINED THE DESCRIPTIONS' REQUIRE HELP ON THIS THANKS
-
SpeedGrade doesn't open after installed
I can't get SpeedGrade CC to open on my Alien Laptop. I more than meet the system requirements with a i7 240GHz 64 bit processor, win 7 with serPac 1, 12Gigs Ram, tons of HD space, 1440X900 display (1600X900 default), GPU card GeForce GT650M and quck
-
Browser notification icon (like sms, mms, or bbm)
There is a browser icon on my screen where mms or sms or bbm icons show up to notify me of a new message. What does a browser icon mean and how do I make it go away? Solved! Go to Solution.
-
Flash installation crashes.
i am trying to install the latest version of flash and the installation keeps crashing. what could be causing this problem.
-
Hi, Is there a way to turn off transition animation on zoom in lightroom? When I click on an image with the magnifying glass I would like the image just to get bigger suddenly in one jump rather than smoothly increasing in size. The smooth increase i