11i APPS EUL4 access from Discoverer 10g

Hi there
Can I access and build reports using Discoverer 10g on Oracle 11 APPS EUL4?
What I know If I access EUL4 from discoverer 10g it gives me the message upgrade EUL, Is it possible to access/work EUL4 using Disco 10g?
Thanks
ASIM

Hi,
No and No. You need a new EUL for 10g.
Rod West

Similar Messages

Setting up Remote Desktop Apps for access from a Mac with 2FA

Hi
Setting up Remote Desktop Apps for access from a Mac with 2FA.
I have a server 2012 remote access gateway, with remote apps published(which uses single signon), behind a 2FA connection (web based) and want to know if its possible to allow macs to connect to the remote Apps behind it. i cannot permanently remove any
of the above setup as it is a requirement.
When i connect from a mac i can login to both the 2FA and remote access web pages and see all the apps but when i click on any app it downloads it to the mac and when i try to run it using Remote Desktop App for MAC i get an error :
"httpendpointexception: 4, The non-proxy http connection failed to connect with the message: 500 internal Server Error."
I have tried with 2fa turned off for testing and get the same result.Does it support 2012 TSGW server? does it support Remote desktop apps? as i cant find a definitive answer on either.
Thanks in advance for any advice.

Hi,
Thank you for posting in Windows Server Forum.
From Error description it seems to be a communication issue between your Mac and your RD gateway server. If you connect from extranet, you may need Remote Desktop Gateway or a VPN/Direct Access connection to your intranet, or forward port 3389 on your router.
500 Internal Server Error seems to be a HTTP related error.
The HTTP status code in IIS 7.0, IIS 7.5, and IIS 8.0
Also, please double check the settings if you have a RD gateway implemented in you intranet.
http://redmondmag.com/articles/2013/12/24/rd-gateway-in-windows-server.aspx
In Windows Server 2012 R2 RD Gateway pluggable authentication is also introduced. This allows custom authentication routines to be used with RD Gateway. For example building a two-factor solution on top of RD Gateway is now possible which allows doing token-authentication
to the RD Gateway which works seamlessly with RD Web Access or RDP file launching.
Please check below article for more information.
Windows Server 2012 R2 is coming what does this add to RDS – VDI
In addition, please provide the log file from the client for further research.
Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Difference between Oracle 11i Apps DBA & Oracle Application server 10g DBA

Hi All....
can anyone explain me the *"Difference between Oracle 11i Apps DBA & Oracle Application server 10g DBA"*
Can Oracle 11i Apps DBA work in a Oracle Application server 10g DBA environment.
Regards,

Oracle Apps is a suite of financial applications.
Oracle Application server is Oracle's scaled up implementation of Apache or Weblogic or similar products.
While Oracle Apps might use Oracle Application Server as middleware, Oracle Apps is much, much more than Oracle Application Server.
An Oracle Apps DBA is primarily busy on the functional side, and with implementing an ongoing stream of patches ;)
The two functions have almost nothing in common.
Sybrand Bakker
Senior Oracle DBA

Upgrade from discoverer 10g to 11g

Hi All,
While upgrading the Discoverer from 10g to 11g customer is getting the below error:
[2009-12-03T14:41:15.143-06:00] [Discoverer] [NOTIFICATION] [] [upgrade.Discoverer] [tid: 13] [ecid: 0000ILMHVhH1nZLiEPsHsS1B6263000004,0] Unknown preference: Administrator#ShowUserTypeChoice
[2009-12-03T14:41:15.143-06:00] [Discoverer] [ERROR] [] [upgrade.Discoverer] [tid: 13] [ecid: 0000ILMHVhH1nZLiEPsHsS1B6263000004,0] UPGCMP-01001: unexpected upgrade exception[[
java.lang.NullPointerException
at oracle.ias.upgrade.config.discoverer.DiscoPreferenceConfigUpgradeItem.upgradeOldPrefs(DiscoPreferenceConfigUpgradeItem.java:182)
at oracle.ias.upgrade.config.discoverer.DiscoPreferenceConfigUpgradeItem.doUpgrade(DiscoPreferenceConfigUpgradeItem.java:77)
at oracle.ias.upgrade.config.discoverer.DiscoConfigUpgrade.upgradeItem(DiscoConfigUpgrade.java:302)
at oracle.ias.upgrade.config.discoverer.DiscoConfigUpgrade.doUpgrade(DiscoConfigUpgrade.java:191)
at oracle.ias.upgrade.UpgradeSupport.doUpgrade(UpgradeSupport.java:1633)
at oracle.ias.upgrade.gui.UAUpgradeThread.run(UAUpgradeThread.java:493)
[2009-12-03T14:41:15.144-06:00] [Framework] [ERROR] [UPGAST-00138] [upgrade.Framework] [tid: 13] [ecid: 0000ILMHVhH1nZLiEPsHsS1B6263000004,0] upgrade exception occurred
[2009-12-03T14:41:15.144-06:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 13] [ecid: 0000ILMHVhH1nZLiEPsHsS1B6263000004,0] Cause: An unexpected upgrade exception has occurred. Action: See the secondary error message for additional details.
[2009-12-03T14:41:15.144-06:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 13] [ecid: 0000ILMHVhH1nZLiEPsHsS1B6263000004,0] UPGCMP-01001: unexpected upgrade exception
After commenting out the particular preference the upgrade fail with another preference, and finally the discooverer upgraded successfully.
So now the customer wants to know what could be the reason for the upgrade failure.
It it because of the preferences are not valid in Discoverer 11g?
Following is the list of preferences the customer commented out:
[Administrator]
###ShowUserTypeChoice
###DefaultUserTypeIsApps
###ExcelVersion
###[Crosstab] <-- Entire section
###Default Title
###Title
###Axis Label
###Cell XGridline
###Cell YGridline
###Axis Style
###[Table] <-- Entire section
###Default Title
###Title
###Cell XGridline
###Cell YGridline
###Row Headings
###Show Annotations
###GraphDataModel
Any help in this regarding is highly appreciated.
Thanks in advance.
Regards,
Padmanabh.

Hi Padmanabh
How are you doing the upgrade?
Personally, because you have to use a new weblogic server anyway I would install a clean 11g and then re-apply any preferences. With that done I would export the entire EUL from 10g and import it into the clean 11g. You'll be up and running in no time at all.
There is no need to upgrade the EUL as it is the same in both 10g R2 and 11g.
Best wishes
Michael

How to change my Apps Store access from Switzerland to U.S.A.

........so I can buy Apps available in the U.S.A.

Are you a legal resident of the USA?
To buy from a particular nations store you must be a legal resident of the country, supply a credit card issued to you by a bank in that country that has a verifiable billing address in that country. If you are a resident of Switzerland, I have my doubts that you legally qualify to make purchases in the US store.

How to delete a workbook in Discoverer 10g

Hello guys,
Does anyone know how to delete a workbook from Discoverer 10g? I created a report in Discoverer Plus as SYSADMIN and gave this to my user. My user only has access to Discoverer Viewer. He went and did a "Save As" on this report. Now when he loggs in to Viewer again, he sees two report. One created by SYSADMIN and the on he created. I want to delete the one he created. How do I go about doing this? Can I do it from Discoverer? If so, which one(Viewer or Plus)? Will I have to login as him to do this? Please advise.

Hi,
I'm sorry for the question but you said:
You just login as the user into viewer and delete the workbookWhere do you see the option to delete from the viewer ?
To delete/ manage workbooks you need to login to either Plus or Desktop versions.
And yes you need to log in using the owner user name
Tamir

HT1491 Search option tab doesn't appear on my iTunes Store when accessed from iPad or iphone

iTunes Store has recently been launched in India ....however search option tab seems to be missing in the app when accessed from iPad or iPhone. Also the purchase option is visible in iPad but missing in iPhone

Me too. 34000+ items.
Gotta wonder if that's a factor.
Just now I removed all remotes from iTunes.
(Prefs > Devices > Forget All Remotes)
Then I turned on Home Sharing on my iPhone.
(Tap the gear icon in the Library selection screen.)
Previously the iPhone was registered as a regular remote.
So both devices are controlling iTunes via home sharing.
Now iTunes is not crashing at all, in full-screen mode or otherwise.
Not sure if it will last, but time will tell.
Hope this is useful to you.
I'll post back if the crashes return.

Discoverer 10g installed with Ora Apps 11i on same box

I've worked through the "coexistence restrictions" for Discoverer 10g (9.0.4) and 9iR1 (1.0.2.2.x) which states:
"The following instances of Oracle Application Server 10g (9.0.4) and Oracle9i Application Server Release 1 (1.0.2.2.x) can coexist on the same computer only after Oracle9iAS Discoverer has been shutdown in the Oracle9iAS Release 1 (1.0.2.2.x) Oracle home:
1.0.2.2.x Standard Edition and 9.0.4 Business Intelligence and Forms
1.0.2.2.x Enterprise Edition and 9.0.4 Business Intelligence and Forms
1.0.2.2.x Standard Edition and 9.0.4 Business Intelligence and Forms without OracleAS Infrastructure 10g
1.0.2.2.x Enterprise Edition and 9.0.4 Business Intelligence and Forms without OracleAS Infrastructure 10g"
Does this imply that I can install 11i on a box, permanently shut down Discoverer and then ON THE SAME BOX install 10g Infrastructure and Midtier including Discoverer 10g?
Has anyone worked through this installation and made it work?
Thanks

This IS possible and have now done it with assist from Oracle tech support.
1. Install 64-bit 10.2.0.1 Databse into OraDb_home.
2. Install 32-bit 10.2.0.1 Client (needs Windows ODBC extensions) into OraClient_home.
3. Apply patch 5500954 for 64-bit - this is a Critical Bug patch 8 for 64-bit.
4. Apply patch 5337014 for 32-bit - this is a patchset to upgrade the Client to 10.0.2.0.3.
5. Contrary to what Oracle note 334528.1 says (which is to patch the 64-bit Server, you must patch/upgrade the 32-bit client as well (otherwise, it still fails).
Also, DataDirect's Connect Ver 5.2 ODBC Oracle "wire-driver" (32-bit version) will work without installing the OraClient at all.
- Will

Discoverer Viewer/Plus 10g after a migration from Discoverer 4i

Hi, I upgrated Discoverer4i to Discoverer 10g with Ebusiness Suite 11i ( 11.5.9) without installin AS 10g
I followed the note: http://oracle-magic.blogspot.com/2006/11/upgrading-discoverer-4i-to-10g-on-apps.html
If I use Discoverer Administrator and Desktop it works perfectly (I connect as an Oracle Application User)
Now, I want to see my reports with Discoverer Viewer/Plus but I don't understand how to do it (always connecting with an Oracle Application user).
My previous URL (with Discoverer4i) was: http://gnvdev.ote.gr:8025/discoverer4i/viewer
Now, after the Discoverer 10g installation I can connect to the "Welcome to Oracle Business Intelligence 10g (10.1.2)" page with the following URL:http://gnvdev.ote.gr:7779/
I didn't understand how Ebusiness Suite 11i ( 11.5.9) can communicate with Discoverer 10g in order to see reports from the web
Can anyone help to understand where and how I should modify anything in order to see my reports with Discoverer Viewer or Plus
Thank you
Alex

If you have followed all the steps in "Note: 313418.1 - Using Discoverer 10.1.2 with Oracle E-Business Suite 11i" then you should be able to access Discoverer Plus/Viewer through the following links:
Discoverer Plus:
http://gnvdev.ote.gr:7779//discoverer/plus
Discoverer Viewer:
http://gnvdev.ote.gr:7779//discoverer/viewer
The above links will prompt for some input, all what you need to provide is:
- Applications Username
- Applications Password
- Database (SID)

Security issues for Discoverer 10g apps 12i

gurus,
I have couple of things to get it done at client.
We are on Oracle Apps rel 12i with dicoverer 10g.
Did anyone setup MOAC to be enabled and operational in business areas?
Setting up secure responsibilities in discoverer for MOAC?
Any setup needs to be done for custom report security in discoverer ?
thx

Hi,
I did setup new MOAC security profiles and assigned multiple organizations to that profile for testing purpose.
After this, I did run concurrent program "Security List Maintennce" etc...
Tested Upding profile at user level or responsibility level.
On APPS side fine.
I need the some basic steps on setup of security issues for discoverer side.
1) Business areas (any security steps need to be followed in order to access data for single or multi-org)
2) Custom Reports ( any security setup or any moac security profile setting against responsibilty for accessing single or multi-org data)
Since we dont have default operating unit parameter as specified in the concurrent program, how do you restrict data?
3) Reconciling security approach r12 with discoverer (any steps need to be followed here after r12 configuration with security issues)
4) Custom Views ( any steps to be followed for single or multi-org data as security aspect)
Looking for info on these setups.
Thx

Accessing Oracle 11i apps through Pocket PC

Normally for any windows client to connect to the Oracle Server we add a entry into the client host file i.e. windows\system32\drivers\etc\host . Once we add the entry we are able to access the Oracle Application.
From a Pocket PC 2002 how do I access the oracle 11i apps ?

Is this possible by enabling wireless server and accessing directly through jsp pages?

Is it possible to run Discoverer 10g non apps on an Applications database

Hello,
I am currently working with a customer whose Discoverer implementation was originally implemented with Discoverer 3.1.36 before apps mode existed.
It was installed on an Apps database (Financials).
It was then upgraded to 4 - still in non apps mode and all was ok.
However, now they need to upgrade to 10g, and rather than go through all the rewriting of their security etc (they have an awful lot of custom folders etc), they have asked if they can upgrade their Discoverer 4 non apps EUL to Disco 10g non apps.
However, during some preliminary testing, it seems that some views are not returning data - for example, fnd_flex_values_vl.
If they log in to the test env with Discoverer 4, the data returns with no issues, however with Discoverer 10g (and the same user) it does not.
They are logging in with the eul owner both times and this user contains both the Disco 4 and Disco 10 tables in its schema, so the grants etc are identical.
Is there a technical reason that whilst this worked at 4, it no longer does in 10?
Kind regards

What happens if they log in as an application user (rather than EUL owner) to retrieve data from these VL views ?
MOS Doc 431001.1 - How Discoverer Uses Business Views Security
HTH
Srini

Migration from discoverer 3.1 to BI 10g

Hi all,
We have embarked on a recent project where the version of discoverer is being migrated from Disc 3.1 to Disc 10g. The one issue that is really bringing the implementation down is that all page settings and printouts need to be reset for every single workbook.
Is there any way Discoverer can retain the print setting, instead of the user having to manually go to each report and preview, reset paper size, margins and then print the workbook?
Please let me know if anyone has any ideas on how to overcome this issue.
thanks
Saliha Mohammed

Hi all
If you were upgrading from Discoverer 4 to Discoverer 10 you would have a chance of retaining at least some of these settings. Unfortunately, Discoverer has no direct upgrade from version 3 for workbooks so I fear you will have to recreate your settings.
When you export / import from 3 you gets the business areas, LOVs and all user access converted however this does not copy any workbooks that may have been saved to the database. This I'm afraid is going to be a manual job for the users to save any workbooks they want to a My Computer and then load and save them to the database inside version 4. You might find that settings are retained if you use Desktop for the transfer of workbooks between 3 and 4.
Going from 4 to 10 you may well have to repeat the process. There are still some anomalies that creep in after the upgrade to 10. One that I know about is the default value for NULL. In older versions Discoverer used to blank the cell but in 10g the default is NULL. I'm afraid no workaround for this is known and if you have any workbooks that make use of spaces for NULL you will have to edit these after the upgrade to remove NULL and replace with spaces.
Best wishes
Michael

I want to take remote access from an iTunes library off of my iPad ...when I hit edit from the remote app it pulls that library up ..if I delete it I just want to make sure that I'm not remotely wiping out the library, just access to it from my iPad ?

I want to take remote access from an iTunes library off of my iPad ...when I hit edit from the remote app it pulls that library up ..if I delete it I just want to make sure that I'm not remotely wiping out the library, just access to it from my iPad ?

Call the apple store you got it from and ask them. Sometimes in the past they've extended the 'no questions asked return' but only Apple can tell you for sure.

Can my colleagues access my itunes account and all of the apps in there from their own pcs? What we really need is a shared itunes account so that anyone in the office can add apps to the account and everyone else will be able to access it?

I have an itunes account to update the office ipad. Now we have more of them can my colleagues access my itunes account including the apps to update their ipads with? it seems silly for everyone to have a seperate account and purchase apps that i have already bought. We just want to share and update one account that everyone can use and access from their own pc.

Unless I am missing the point here - or in the event that there are different terms and conditions for the use of iPad in the Enterprise with regard to iTunes purchases - once you have purchased an app - you are free to download that app again - at no charge - to as many iDevices as you desire - as long as you are using the same Apple ID and iTunes account that you used to make the original purchase.
So the short answer to the question - IMHO - is Yes! My wife, my daughter and I share one iTunes account and we download apps onto four different iDevices - and only pay for the apps once. The purchases are tied to the Apple/iTunes account and not to the PC or the iDevice.
The only caveat to this point is - I have no idea how Apple handles purchase for businesses meaning that I don't know if businesses are subject to the same terms and conditions as we "everyday" users.
Maybe the company could set up one iTunes account and you could all share from there but I still don't see why this can't be done. However, that is why I suggest that this question might be better served being posted in the iPad in the Enterprise section of the ASC.

11i APPS EUL4 access from Discoverer 10g

Similar Messages

Maybe you are looking for