11i install on SuSe Linux 7.3

Has anybody tried that? Is it working ? I know on Suse site the support matrix is showing SuSe 7.0 is supported.
But I want to try Suse7.3.
Any clue or tricks welcome.
Thank in advance.
Bhupendra B Babu

Similar Messages

Install of SuSE Linux 9.0 freezes early on

I recently upgraded to an MSI 865PE Neo2 motherboard, with a P4 2.8 GHz processor. I've installed Windows XP Professional without difficulty, but I tried to install SuSE Linux 9.0 and it locks up early on in the boot process during "hardware detection." Opinions on this forum about earlier versions of SuSE and the YaST program were fairly poor, and their own site says that support for the Neo2 is only "partial." Has anyone gotten Linux to install successfully on this mobo, and if so, which flavor?

I have a Neo2-S and have mixed success w/ Linux as well. I just tried SuSe Live 9.2 and it took me about 10 times to get it to boot. I think the only thing that I changed when it actually booted was the option to make the boot screen verbose. I hit something like F3 and changed that option.
Knoppix 3.3 works great for me
Knoppix 3.4 doesn't boot
Mandrake Move 10 doesn't boot
I may have some of the version numbers wrong because I am just typing them off of the top of my head. I also have only tried the bootable CD version because I don't want to risk any conflicts w/ my Win XP.
I am also about to get a new 200 GB SATA drive and I know that is going to complicate things even further. I just wish that the devs would spend more time working on hardware support so n00bs won't have probs when trying out Linux.
They really need to make all distro's of Linux be able to use all of the IDE/SATA channels in a system. This is probably dependent on the kernel though. I don't know that much about Linux.

Java 1.5 rpm install on Suse Linux 9.3

Hi all,
I downloaded the jdk-1_5_0_17-linux-i586.rpm from SUN, and tried to install it via YaST on my Suse 9.3 box, but it won't install.
I click "Install Package with YaST" and then it just brings me to a blank screen.
Anyone else experience similar issues, or thoughts to workaround this?
Cheers
John

Figured it out... thanks anyways.
If anyone else has a similar problem: First, run rpm -i on the jdsk.rpm, and make sure it passes the checksum. (Mine did not). Then, check to see if jdk1.5.0_17 was installed already via rpm command line util, instead of yast. Suse doesn't like it when you do that, and they don't play well together (yast and rpm command line).
I ran rpm -e on the package to remove it, and then ran the yast installer to re-install the jdk 1.5, and it is working now.

OAS Install Issues SUSE LINUX [ulimit]

Like many others I am having issues installing OAS onto my SUSE EE Linux Server. The problem is that I cannot modify the ulimit for the oracle user (the user to install the OAS under). I have followed the directions found on the oracle site for installing 10g. I have also done a lot of searching regarding this issue and none seem to work. I have redone the process using orarun with these directions (http://www.oracle.com/technology/tech/php/installtxt/10gr2_sles9.txt) And I have followed directions found (http://www.novell.com/support/search.do?cmd=displayKC&docType=kc&externalId=10096341&sliceId=&dialogID=6335233&stateId=0%200%206333704) regarding setting /etc/security/limits.conf, /etc/pam.d/login, and /etc/pam.d/xdm . Any help on this issue would be excellent!
The issue is that ulimit -n for oracle returns 1024 no matter what I do. And ulimit -n 6653 returns an error.

Ok its working now. Basically I didn't set "session required /etc/pam.d/pam_limits.so" in /etc/pam.d/xdm till late last night and I forgot to reboot the server. This morning when I was running ulimit -n 65536 to get the error msg it worked. So thanks for the quick response, but my problem is now solved.
Ryan

EBS 11i install error on Linux Rhel4

Hi Friends,
I have successfully insatalled EBS 11i (VISION) on linux before .
Then I do another linux test install for a fresh install (PROD) EBS 11i as my second installation.
But i was hit with the error RW-50004 in the middle of the process.
The database log error shows the ff:
======================
Starting listener process PROD ...
addlnctl.sh: exiting with status 1
Cannot start net8 listener
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
listener.log
=======
LSNRCTL for Linux: Version 9.2.0.6.0 - Production on 16-DEC-2008 12:29:15
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting /u03/oracle2/proddb/9.2.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 9.2.0.6.0 - Production
System parameter file is /u03/oracle2/proddb/9.2.0/network/admin/PROD_accelerator/listener.ora
Log messages written to /u03/oracle2/proddb/9.2.0/network/admin/prod.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROCPROD)))
Error listening on: (ADDRESS=(PROTOCOL=TCP)(Host=%s_virtual_hostname%.abc.biz)(Port=1541))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Listener failed to start. See the error message(s) above...
================
my etc/hosts
192.168.1.173 accelerator.abc.biz accelerator
==============
Why do I get %_virtual_hostname% at my Host?
Thanks a lot

I have successfully insatalled EBS 11i (VISION) on linux before .
Then I do another linux test install for a fresh install (PROD) EBS 11i as my second installation.Do you mean on the same host?
Why do I get %s_virtual_hostname% at my Host?Please check the hostname in the listener.ora file under $RDBMS_ORACLE_HOME\network\admin\<CONTEXT_NAME>. If it shows "s_virtual_hostname", edit the file and replace this entry with your hostname "accelerator.abc.biz" and click on retry button.

Install Oracle 10g on Suse Linux Enterprise Server 10

Will 10g install on Suse Linux Enterprise Server 10? If so, what setting do I need to change to get it to install?

Yes, it will install. Oracle supports it.Apparently they forgot to tell support. Certify still holds at SLES 9.
http://www.oracle.com/technology/support/metalink/index.html
It's possible to make it work. However, I usually watch http://www.novell.com/products/server/oracle/matrix.html for info.

NetWeaver 2004s installation problem on Suse Linux

Hi,
I downloaded NetWeaver 2004s 90 days version from SDN and installed on Suse linux. I am not able to execute command to get the license after installation. Here is the line I executed
add user n4sadm
unpacking adm_env.tar.bz2
Changing password for n4sadm.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
add user sdb
Changing password for sdb.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
add user sqdn4s
unpacking sqd_env.tar.bz2
Changing password for sqdn4s.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_I.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_II.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_III.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPN4S.tar.bz2
Service visinet-gui on port 3601/tcp was deactivated...
Service cpq-tasksmart on port 3201/tcp was deactivated...
Service netxms-mgmt on port 4701/tcp was deactivated...
Service iwec on port 4801/tcp was deactivated...
Service tick-port on port 3200/tcp was deactivated...
Service netxms-agent on port 4700/tcp was deactivated...
Service iims on port 4800/tcp was deactivated...
Update the necessary information in sysctl.conf:
kernel.shmmax = 23136829430
kernel.shmall = 5242880
kernel.msgmni = 1024
fs.file-max = 32768
kernel.sem = 1250 256000 100 1024
Found interface: eth0 . Alias is eth0:0
ifconfig eth0:0 192.168.155.1 up
Ok
n4shost:n4sadm 35> /usr/sap/N4S/SYS/exe/run/saplicense -get
/usr/sap/N4S/SYS/exe/run/saplicense: Exec format error. Binary file not executable.
Can any one help me to complete the installation and execute the server successfully. I am very new to linux. Do i need to execute any other commands to complete my installation.

Dear Rajasekhar,
this error simply comes, because the architecture of your computer is not the same as the one from the test drive. As I'm not sure, which architecture the N4S test drive uses, we simply have one of the following situations here. Either
your machine is x86_64 and the N4S is i386 or
your machine is i386 and the N4S is x86_64.
Please check!
Thanks,
Hannes

SUSE Linux 8.0 + 9iAS r2 = Success

Hi PPL, just reporting success and performance inscrease under Suse Linux 8.0:
I can say that Oracle 9iAS under Linux for me performs at least 25-30% faster than Windows. I've installed IAS and INFRA in only one machine:
Pentium 4 1.8Ghz
1 GB RAM
1 SCSI 15kRPM IB DISK
Adaptec Ultra 160 controller
2 GB SWAP
I use PORTAL, FORMS, REPORTS and WIRELESS... I've installed the BUNDLED INTER-OPERABILITY PATCH Version of 9iAS r2, so i did not had to apply that patch. I've just applied today one CORE patch that was released in September for Linux/Unix versions and yesterday for Windows versions (patch 2542920)
I've used SUSE 8.0, installed the Korn Shell package (KSH) and followed instruction on this VERY USEFULL whitepaper at htis site : www.stute.net !
Remember to change SHMMAX parameters for the kernel as explained in www.puschitz.com !
My last installation was made in 3 hours (SUSE installation included)
Other tricks was i had to execute: xhost + as root to let oracle set DISPLAY and runInstaller! The linking errors were easily solved as explained in www.stute.net whitepaper.
I've created a script to startup the INFRA database, but i couldnt start up automatically all services (OC4J's, HTTP, WEBCACHE), so i start them manually in OEM site http://mysite:1810
I'm not a Linux GURU, but now i feels satisfied with performance and with stability.
More... in Linux i can compile my FORMS files (FMX) even when they are used by someone user in a forms session.
And even better is that PATCHS for Linux/Solaris usually are on "street" 1 month before Windows versions.
Of course, I go crazy everytime i found bugs, but usually they are not plataform related.
Joao Oliveira
PS: If anyone needs help, i can give help online yusing ICQ messenger. My number is 23234761

Hi
I installed on SUSE Linux 8.0 the 9iAS R2, only the option A - J2EE and WebChache. Now I have following problems.
1. Some configuration tools (OC4J, OPMN, DCM)were not initialized in the end of the installation. I read other postings with the same problems, but i never read a solution of these problems.
2. After installation, i want to start the http server manually (dctml start -ct ohs) , but it doesn't work. I got the error message ADMN 100999, i dont know why !
If i want to start the http-server with enterprise manager (EM worked partically) I got an EMException.
I have no idea to resolve the problems, perhaps you
Thank You

T500 and SUSE Linux

Hi, There,
I would like to install the SUSE Linux on T500 as I had enough issues with the Windows VISTA and Windows 7 is not officially released yet. Has anybody out there recommend using the SUSE on T500. Lenovo site itself doesnt seem to offer the drivers and the thinkvantage software for Linux. So I'm I going to miss all that Thinkvantage stuff? Also without the Lenovo Vendor drivers will the system be stable and will not miss any essential features.
Cheers,
Max.
Solved!
Go to Solution.

Not all features in thinkvantage may be available for SuSE Linux,you can wait for windows 7 if your intention is to use a good OS.
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Error while trying to install NI-VISA driver on SUSE LINUX 11.1(The version of gcc in the path does not match the version of gcc used to compile the currently running kernel.)

hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
the error message it shows is
******************************** ERROR ****************************************
* The version of gcc in the path does not match the version of gcc used to    *
* compile the currently running kernel. This can cause unpredictable         *
* behavior in kernel drivers and should be fixed.                             *
* gcc version: Linux)                                                          *
* kernel compiled with: 4.3.2                                                 *
******************************** ERROR ****************************************
my kernel source version is
linux-8nes:/home/admin # rpm -qi kernel-source
Name        : kernel-source                Relocations: /usr/src
Version     : 2.6.27.29                         Vendor: openSUSE
Release     : 0.1.1                         Build Date: Sun 16 Aug 2009 03:43:52 PM IST
Install Date: Sat 24 Oct 2009 02:13:12 AM IST      Build Host: rinck
Group       : Development/Sources           Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
Size        : 309251954                        License: GPL v2 only
Signature   : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
Packager    : http://bugs.opensuse.org
URL         : http://www.kernel.org/
Summary     : The Linux Kernel Sources
Description :
Linux kernel sources with many fixes and improvements.
Authors:
    Linus Torvalds <[email protected]>
    see /usr/src/linux/CREDITS for more details.
Source Timestamp: 2009-08-15 17:53:59 +0200
GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
GIT Branch: SLE11_BRANCH
Distribution: openSUSE 11.1
i had also installed GCC 4.3.2.
it shows the error message as i had posted.
please kindly help me on this.
Thanks and regards,
P.karthick

Check this solution

Can't Install Solution Manager on Suse Linux Enterprise Server 10 - JAVA

Hello everyone!
I've been trying to complete the pre-requisites in order to install Solution Manager SR2 on Suse Linux Enterprise Server 10 x64 - SP1.
There's only one last condition that I haven't met, and it's the Java Runtime Environment version...
I checked the recommended note 867110 and it says that i need to have installed the J2SDK 1.4.2_08.
SLES10 includes the 1.4.2_13, so I had to uninstall it, and download the right version from Sun Microsystem's official webpage.
When I installed the version 1.4.2_08, i'm not able to run SAPINST because there's no Java Runtime Environment running on the server.
I started to investigate and I found in some forums [NOT EXPLICITLY] that there's no port for J2SDK 1.4.2_08 on x64 linux systems.
I can't believe this is true because SLES10 is recommended by SAP to install Solution Manager, so I hope somebody can help me on this.
My specific question is: Does anybody know if is true that J2SDK 1.4.2_08 is NOT COMPATIBLE with x64 Linux?
In case of being true, is there any way to be able to run SAPINST ? because if I enable the version SLES brings built in, i'm able to run the SAPINST but it detects that i'm not running version 1.4.2_08 and doesn't allow me to continue installation.
I hope somebody can help me soon...
Regards!

> SAPINST_JRE_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
>
> JAVA_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
You downloaded the wrong version - the one you have is for Z-Linux(Linux running on the mainframe - not for x64).
You need to download the x86_64 (or AMD64) version.
Install the correct one and try on a new console:
export JAVA_HOME=/opt/IBMJava2-amd64-142
export PATH=$JAVA_HOME/bin:$PATH
Then execute
java -fullversion
and it should show the correct version.
Markus

Problem with installing Oracle 10g on Suse Linux

Hi everybody!
I downloaded Oracle 10g Express from this url:
http://www.oracle.com/technology/software/products/database/xe/htdocs/102xelinsoft.html
it is free version for developers.
I copied it into computer where was installed Suse Linux Enterprise Edition.
But when I run it shows this kind of error:
error: rpmReadSignature failed: region failed: BAD, tag 15872 type 2047 offset 20480 count 4096
error: oracle-xe-univ-10.2.0.1-1.i386.rpm cannot be installed
It was downloaded without any problem. But checksum is different from that shown on website. I think this is the problem.
What is the problem? Does anybody know answer?
Regards,
Seti's fiction

Yes, you appear to have a bad copy.
I have not had a problem when the check sum matched. Therefore I encourage you to download again.

Installation of Oracle EBusiness Suite 11i Release 10.2 on Suse Linux 9

Hi,
I have been going thru this forum and got some great tips but am still having problems installing it on Suse Linux Enterprise 9. The reason for failure is at 20% - adrun9i.sh script. Initially it was giving me error while unzipping the files, now it passes that step but gives error while configuring db. I am not sure what the problem is. I have set all the possible kernel parameters. Any help is appreciated?
Thanks in advance,

I had the same issue, though I cant remember the percentage anymore, but it was whilst on Database Disk 2.
What I found out was that the DVD in which that zipXX file was had a CRC error, and the size of the .dbf (I think it was a xxxtx.dbf file) was smaller than expected, cos I manually unzipped this file during a rerun of the installation which finally succeeded. Unfortunately, the DB srung the error after I tried forcing it to mount and open.
I have now installed the same on SLES9, after I downloaded a fresh set of files from edelivery.oracle.com ( Its a nightmare if you have a slow broadband - Lasted me about 2 weeks, using a download manager)
You can see the article written by Micheal B on coolnotes in the Novell site, and get in touch if further assistance is needed.
Good Luck if you havent given up on the idea

Unable to install Oracle Developer Suite 10 on SuSe Linux 11.0

Hi all,
I have installed Oracle 11g on SuSe Linux 11.0 with no issues. I am unable to install Oracle Developer Suite10.12.02 on same (SuSe 11.0). The installation gets to about 94% and then fails with the following error:
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
Here's the actual (make failure) log entry:
gcc -o rwbuilder -L/home/oracle/app/product/11.1.0/ods//lib/ -L/home/oracle/app/product/11.1.0/ods/lib/ -L/home/oracle/app/product/11.1.0/ods/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386 -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/server -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/11.1.0/ods/reports/lib/ui10.o /home/oracle/app/product/11.1.0/ods/reports/lib/uiicxd.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsng.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwscl.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc0.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsdt.o -lrw /home/oracle/app/product/11.1.0/ods/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/11.1.0/ods/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/11.1.0/ods/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/11.1.0/ods/lib,-rpath,/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/11.1.0/ods/lib -L/home/oracle/app/product/11.1.0/ods/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/11.1.0/ods/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
The only serious flaw I can see in the config is that I'm using libstd++ 4.3 instead of the requested 3.2.2 which 'should' be acceptable as it's a newer version - can anyone help please? Thanks in advance for any helpful advice anyone can offer.
Richard Foley
ps. What's also a bit odd, is that the overall exit status of the installation is regarded as succesful...
*** End of Installation Page***
The installation of Oracle Developer Suite 10g was successful.
Edited by: orafoley on Oct 14, 2008 5:19 PM

Hi Hub,
Done that, nothing:
$> env | grep -i LD
$>
On the off-chance that it had something to do with installing Oracle 11.0 with ODS Developer 10.0, I've rolled my database installation back too, so now I have:
Oracle 10.2.01
Oracle Developer Suite 10i (ODS 10.12.02)
SuSe 11.0
Now when I runInstaller I get this, which is surprisingly similar:
Start output from spawned process:
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librwu.so; \
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librw.so
rm -f rwsutil.o rwspid.o ; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librwu.a rwsutil.o rwspid.o ; \
(LD_OPTIONS="-z muldefs"; \
/usr/bin/gcc -o /home/oracle/app/product/10.2.0.1/db/lib//librwu.so -shared -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ rwsutil.o rwspid.o \
-lm /home/oracle/app/product/10.2.0.1/db/lib/libclntsh.so -lpthread -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -lc )
rm -f zrhitem.o zrhcursor.o; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librw.a zrhitem.o zrhcursor.o
rm -f rwbuilder
gcc -o rwbuilder -L/home/oracle/app/product/10.2.0.1/db//lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386 -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/server -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/10.2.0.1/db/reports/lib/ui10.o /home/oracle/app/product/10.2.0.1/db/reports/lib/uiicxd.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsng.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwscl.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc0.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsdt.o -lrw /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/10.2.0.1/db/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/10.2.0.1/db/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/10.2.0.1/db/lib,-rpath,/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/10.2.0.1/db/lib -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'libso_install bld_install proxy_install runm_install server_install cgi_install cli_install conv_install qv_install' of makefile '/home/oracle/app/product/10.2.0.1/db/reports/lib/ins_reports.mk'. See '/opt/oracle/oraInventory/logs/installActions2008-10-30_02-12-25PM.log' for details.
Richard.

Cannot install SDK 1.4 on Suse Linux 8.0

When I want to install the SDK 1.4 on Suse Linux 8.0 comes the error "bad interpreter, keine Berechtigung".
I typed in a console window "./j2sdk.... .bin". I tryed both versions, the rpm and the tar shell script and also as root.

That error appears to be along the lines of "bad interpreter, no authorization". (considering "Permission Denied") :-/ Possibly chmod +x the file(s) before running, or run the command "sh ./j2sdk.....bin".
Bhav

11i install on SuSe Linux 7.3

Similar Messages

Maybe you are looking for