11i installation failled error

hi
iam performing the installation of oracle applications 11.5.10.2 on RHEL 5.4.
i encounter the follwing errors during the pre req check and iam unable to proceed with the installation.
Both the
1)os patch chech
2)systwm utilities check have got failed
The error i get in os patch check was
check that all pre req patches for jdk 1.4.2 are applied on this platform,
the error i get on system utilities check was
check system for make,ld,ar,perl and cc.
These 2 errors i encounter during install process.
I checked for pre req and i followed metalink and seems all pre req were installed
and which ld,which make and all commands show the correct path
Please say me how can i solve the above erros
Thanks,
Aram

Duplicate post -- 11i installation failled error

Similar Messages

11i installation problem on NT 4.0 SP6a

I have one 11i installation problem:
envoirment: NT 4.0 sp 6a MEM 394MB, cpu 550MHZ HD 40GB
install MKS, GNUMAKE (3.79), VC++, JDK 1.3 before Apps install.
And I could see which, gnumake.exe on DOS prompt. But the error
message say:
" which command is available; gnumake is not
available."
I already set the path varible path=C:\MKSTOO~1\bin;C:\MKSTOO~1
\bin\x11;C:\MKSTOO~1
\mksnt;C:\VStudio\Common\Tools\WinNT;C:\VStudio\Common\MSDev98
\Bin;C:\VStudio\Common\Tools;C:\VStudio\VC98
\bin;c:\make\WinDebug;c:\make\WinRel
How to fix this problem?
Any comments will be appreciated.

Actually, I already did this and found that this works correctly. I guess it
was the "install to d:\\weblogic600" that threw me off...
Thanks,
Robert
David Felts wrote:
Please add "\" after "d:"; this should work. We'll look at making this more
user-friendly for Beta 2.
Robert Patrick wrote:
I tried to install the current beta 1 version of WLS 6.0 today after
uninstalling the pre-release version that I had previously installed
with no problems. The problem is that when I try to set the "BEA home"
to the existing location ("D:" -- so that the product ends up in
D:\weblogic600), the installer claims that I do not have write
permission to that directory. This is hogwash since I am logged in with
administrative priviledges and was easily able to install the
pre-release copy like this (and yes, I have deleted the previous
directory).
Any thoughts?
Robert

ORACLE APPS 11i Installation

RW-50011 Error is coming while starting Apps 11i installation in linux(RHEL-ES)
with 30G for WindowsXP and 130G for Linux. I gave partition as 104G for Oracle,12G for root, 1.5G for Swapspace. I checked all the required RPMs to be installed. But while running the start CD I am getting an error.while completion of RDBMS - Disk 1, I am getting error RW-50004 Error. Kindly resolve this issue whoever has mastered over it.
I extend my gratitude in anticipation.
Awaiting reply
Vijay

Other people has had this problem before, you may want to check for it Re: Error RW50004/RW50011.
Most common solution for this issue has to do with the way ksh is being called from the path envrionment variable, and where the install script assumes where it is.
1. Make soft link of the file from /usr/local/bin/ksh to /usr/bin/ksh and before you start your installation start a session in a ksh environment.
or
2. Alter the search path used by the install script. Not advisable, as you are not suppossed to tamper with Oracle code.
or
3. Copy ksh From /usr/local/bin/ksh to /usr/bin
It is recommended to read the metalink this document Doc ID: 287453.1 "Oracle Applications 11.5.10 - Installation Update Notes for Linux x86 ...".

Problems loading standard forms in new 11i installation

Hi
Just installed the 11.5.10 Vision demo on SLES Linux on VMware. The installation went fine, and everything worked
I could access not only the portal, but the forms pages (after installing the supplied jInitiator package)
My problem is, after re-booting the server, everything works just fine (although I have to start up manually) EXCEPT I cannot now start any forms
When I click on a menu choice for any responsibility (say, System Administrator -> Concurrent Requests), jInitiator doesn't start up
I know the client (Windows XP) browser (IE 6) works fine with 11i, as I have accessed other 11i installations on the network without problem
Any pointers to where I should be looking ? It's obviously a server issue
Many thanks
Simon

Thanks for your help Yury, after checking through the processes and checking and re-checking the error logs, it turned out there was a problem with some of the environment variables
Once correcting that problem, everything starts up fine now. Strange that it only affected the forms server, but hey, it's all fine now

Camera Raw 6.7 Update for Mac OS 10.10: Installation Failed error message.

Camera Raw 6.7 Update for Mac: Installation Failed error message. Update downloaded directly from Adobe website. Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished. Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath Mali

Hi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

After itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)

after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)

Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode

Trying to download icloud control panel - only getting so far. Got message: The installer encountered errors before iCloud Control Panel 2.1.2 could be configured. Your system has not been modified. To retry these operations at ltr time, pls run again.

First time on here... so not sure if doing correctly.
I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok). I only get so far - 2 times I've tried it. Keep getting message:
The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
huh?

As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
- Right click on "my computer"
- Select the "Advanced" tab
- Click on "Environment Variables"
Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
Or you may just go to a DOS Prompt and type the following commands:
1 - %temp% and hit enter
2 - %tmp% and hit enter
to both of these commands you will get a reply such as:
'c:\temp' is not recognized as an internal or external command, operable program or bath files.
So by looking at the reply you can see that my temp folder is c:\temp
The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
Hope it helps.

Installer Encountered Errors - PLEASE HELP

Hi,
Getting very annoyed - sat at the computer for almost 2 hours.
Have windows Vista and finally it has allowed me access to install iTunes. When I go through the stages to install I get the following message:
+The installer encountered errors before iTunes could be configured. To retry these operations at a later time, please run the installer again.+
I have tried so many times. Windows is up to date and I have looked at the troubleshooting pages and am getting nowhere. I want to play with my new toy and can't. Can anyone help me get this thing installed successfully.
Thank you!

See if you can get itunes to install from another Windows user account. That will tell you if the problem is system-wide or user-related.
Then try other steps listed in this article:
http://support.apple.com/kb/HT1926

'Installer encountering errors before itunes could be configured', also won't let me open old itunes... Can't access my itunes at all... anyone help?

Everytime I try to install the new itunes it come up with the following message: ' The installer encountered errors before itunes could be configured, Errors occured during installation, your system has not been modified. Please run installer again or click exit' I've tried to install it multiple times now and get the same message everytime. I've also tried re installing itunes 10, but when I go to open it it comes up with the message 'The files itunes libray.itl cannot be read because it was created by a newer version of itunes'. Please help.

Hey sjl95,
Thanks for the question. I recommend that you refer to this article if you are running into issues re-installing iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

ITunes 7.3 installer "encountered errors before iTunes could be configured"

I was able to originally install itunes 7.3.1.3 (upgraded from 7.2) and use it with my iphone (activated/synced for 2 weeks with no problems). I had a problem due to a disk full which corruped Outlook.
I cleared substantial disk space, reinstalled Outlook 2003. This seemed to have corrupted the iTunes sync function, so I uninstalled iTunes (using Add/Remove Programs control panel), and have since been trying to reinstall. I am continually getting the "iTunes installer Completed - The installer encountered errors before iTunes could be configured" error message.
I have read many messages and suggestions in these discussions, and already tried the following:
Completely uninstalling iTunes and Quicktime (iTunes no longer shows up in the Add/Remove programs or using the Windows install cleanup utility) follwing all the steps listed in "Removing iTunes, QuickTime, and other software components for Windows XP" http://docs.info.apple.com/article.html?artnum=93698.
Quicktime (version 7.2 Pro) is currently installed. I can cleanly install/remove Quicktime alone with no errors, but not using the combined quicktime/iTunes installer.
I have tried redownloading the itunes installer several times, and even used the Apple Software update download only option and then manually running the itunes.msi file, but still get the same error.
I have tried manually removing all instances of iTunes/iPod/activesync/iphone that I can find in the registry and all the iTunes/iPod folders as the above knowlege base article instructs.
There must still be some other remnant of the old install, because if I try to install iTtunes 7.2, I get an error message that a later version is already installed, but I have not been able to find anything else.
I have even enabled the verbose logging, the error seems to occur in this section of the log:
MSI (c) (00:C8) [11:00:26:796]: Invoking remote custom action. DLL: C:\DOCUME~1\[myusername]\LOCALS~1\Temp\MSI36.tmp, Entrypoint: iTunesLaunchConditions
Action ended 11:00:26: iTunesLaunchConditions. Return value 3.
MSI (c) (00:FC) [11:00:26:859]: Doing action: SetupCompleteError
Any suggestions on what else I can try would be appreciated. One of the main reasons I need sync my ipnone to my work windows machine is to keep my Outlook contacts and calendar. I have no problems with iTunes on my macs.
I am running XP SP2, and have local administrator rights on my Dell 610 notebook.

I had to find this solution from another site, so thanks to all the people who viewed this thread & knew how to fix this but didn't bother.
If anyone is weary enough to come to this forum to solve this problem, here is one solution that worked for me & it may work for you if you encounter the error:
"the installer encountered errors before safari could be configured"
1. Use a trustworthy registry cleaner to clean your registry such as Ccleaner or Advanced System Care. This step may not be necessary though.
2. Go to "C:\Users\MyUsername\AppData(Hidden)\Local\Temp" & delete everything in it.
3. If step 2 still doesn't allow you to install Safari, then try:
4. Open Start type "CMD" in the search button, then in the cmd prompt "Regedt32"
5. In the reg editor open:
"Computer" / "HKEYCURRENTUSER" / "Software" / "Apple Computer, Inc." & try deleting the entries for any Apple programs that may be causing any conflicts.
Be aware that any programs that you delete registry entries for may not function correctly afterwards or need to be reinstalled, but this more drastic measure should hopefully allow the installation of Safari browser.
Hope this helps any further visitors to this forum looking to solve this problem it worked for me, good luck.
Message was edited by: RottenestApple

Installer Encountered Errors before iTunes could be Configured

I keep getting the same Error over and over again:
*iTunes Installer Completed*
The Installer encountered errors before iTunes could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
Click Finish to exit the Installer.

I'm using version 8.2 lately and i downgraded to version 7 for some reason.... After i got my new iPhone 3GS yesterday. Which is needed the 8.2 version....So i uninstall the version 7 and re-install the version 8.2 again and i got this message....
*"A NETWROK OCCURED WHILE ATTEMPTING TO READ FROM THE FILE C:\WINDOWS\INSTALLER\BONJOUR.MSI".....*
I try to check this file in my C:\ Drive but unfortunately i can't find it and i can't install the iTunes 8.2..... and the bad thing is i can't f#*******ing use my new iPhone 3GS....
Please help me or otherwise maybe just return it to the shop and get something else instead of this new iPhone 3GS...... too much trouble....

New 7.6 iTunes64Setup.exe "The installer encountered errors before iTunes..

I am using Vista 64 bit. Used 64 bit IE to download the proper file
iTunes64Setup.exe
from
http://www.apple.com/itunes/download/
But I get this error when I try to install:
The installer encountered errors before iTunes could be configured.
To retry these operations at a later time, please run the installer again.
Click Finish to exit the installer.
I tried installing when logged in as an administrator, and again as a a user, again same results. I tried uninstalling 32 bit iTunes 7.5 and rebooting, but the issue still remains. I manually wiped away the
c:\Program Files (x86)\iTunes
directory (had only one file in there after uninstall), same problem.
FYI, this is just my secondary machine, so I'm not worried about loosing anything. So registry cleaning likely. But first, I'll try installing on a pristine 64 bit Vista virtual machine, just to see if the installer binary itself runs correctly on a machine without a history of iTunes 32 bit.
Is this a known issue with 7.6 64 bit? Is there a workaround?
There are many search hits for similar errors under 7.5 32 bit, but I seem to be alone with this error with 64 bit installer, for now...

FYI, I downloaded iTunes64Setup.exe again (not from cache), despite same exact filesize on my hard drive, this time, no install error, problem solved. So perhaps Apple uses no built-in CRC error detection, but at least it works now. I'm so glad 64 bit Vista is finally properly supported without errors about CD burning when you start it (I never bothered with the gear drivers workaround).
I did notice it still installs in the
C:\Program Files (x86)\iTunes
directory despite being a 64 bit app, not sure if that matters, and not sure if it's a side effect of having 32 bit version in that directory previously.

The installer encountered errors before apple mobile device support could be configured

I'm having issues with installing apple mobile device support. Every time I try to install apple mobile device support I get this annoying message:
the installer encountered errors before apple mobile device support could be configured
I have tried these two ideas with no luck.
Had this issue, and none of the solutions above worked, here is what I did to fix the issue, Install Itunes like you normally would, admin rights ect. When you get the error message "Itunes errors occurred during installation before itunes could be configured" do not click finish, leave that folder up, no navigate to your appdata directory such as example C:\Users\Your Username\appdata\local\temp, inside there look for a file called iTunes64Setup.log or iTunes32Setup1850.log, open that up and scroll down, look for these key things as in example, "Executing: "C:\windows\system32\msiexec.exe" /i "C:\Users\Crusisxx\AppData\Local\Temp\IXP593.TMP\iTunes64.msi" INSTALL_SUPPORT_PACKAGES=1" so I would navigate inside the folder in my temp called "IXP593.TMP, there you will find all the installation packages, copy all of those files and paste either on your desktop or a new folder ect, once done you can now click finish on the failed itunes installer, now whether or not where ever you decided to place your files you copied from that temp folder you will want to run Itunes64.msi or Itunes.msi ect, and run the installer, you should now have successfully of installed Itunes.
Itunes 11.1.1 Errors occurred during installation...
I got it. I just first uninstalled iTunes then this:
1.Open up the Command Prompt as an Administrator (Go to All Programs > Accessories and Right Click on Command Prompt and then choose Run as administrator)
2.Type cd C:\Windows\SysWOW64
3.Type regsvr32 vbscript.dll (This registers VB Script with your computer.)
4.Now install iTunes as you normally would by double clicking on the install program and wait for iTunes to finish installing.
5.Type regsvr32 /u vbscript.dll (This unregisters VB Script with your computer.)
Re: "This iPod cannot be used because the required software is not installed."
What else can I do and why is it not working?

Try this: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

HT1926 After installing the lates version of iTunes, a bubble pops up and says, "iTunes installation complete, Error occured during installation before iTunes could be configured. Your system has not been modified.." How do I correct this?

After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
I did this, but this bubble keeps appearing. What do I need to do?

Hello there, glenkram.
The following article outlines great steps to try for troubleshooting your very issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

11i installation failled error

Similar Messages

Maybe you are looking for