11i Patch Wizard - MOS credentials not working

Linux x86
DB 10.0.2.4
11.5.10.2
AD.I.6
ATG.RUP-6
I am trying to use the Patch Wizard. I just applied patches 10405353 and 10123716 and still cannot get the MOS credentials to work -- receiving this error: "Unable to connect to Metalink. Please enter a valid Metalink userid and password. Please also check if the Web Proxy Setup information is correct."
I am pretty sure that we do not have a proxy server and I have entered the credentials correctly.
I also used the SYSADMIN user.
The only other potential issue is that I have both "s_proxyhost" and "s_proxyport" defined in the CONTEXT file.
In MOS note 297689.1 is says that if we are not using a proxy then they should be null.
Does that mean I need to set them to null using OAM and then run autoconfig?
Thanks, Chaz

Great, making these "s_proxy" values null then requires controlled patch 7582470 what has a pre-req of patch 11i.FIN_PF.G (400+ MB) which we don't have.
I can't believe that I have to move to 11i.FIN_PF.G to use the Patch Wizard.
I have a test R12 instance where this worked just fine.
I'll open an SR and see if there are any other options.
Thanks, Chaz

Similar Messages

Puppet Enterprise Web Console Credentials - Not working

Hi,
I have successfully created a new virtual machine and add the endpoint ports as suggested by the Puppet Lab instruction.
After provisioning, I am able to connect browser based puppet enterprise URL.
But even after following the given below steps using Putty (SSH) also my provided credentials are not working in the Puppet Enterprise browser login.(https://name.cloudapp.net)
Username:
sudo grep ‘auth_user_email’ /etc/puppetlabs/installer/answers.install
q_puppet_enterpriseconsole_auth_user_email=[email protected]
Password:
sudo grep ‘auth_password’ /etc/puppetlabs/installer/database_info.install
q_puppet_enterpriseconsole_auth_password=mypassword
Cheers, Senthilraj

Hi,
Did you mean that you could not SSH to the VM using Putty?
Based on my experience, you just need to check the endpoint public port for SSH, and then using "xxx.cloudapp.net" with that public port to connect to the VM. Then, you need to provide the user name and password. The username and password are
defined when creating the VM.
Did you upload an X509 certificate when creating the VM? If yes, you refer to the article below for reference:
How to Use SSH with Linux on Azure
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SQL Developer 1.1 Patch 3 still does not work on 64-bit Windows

There has been a long-standing problem with SQL Developer 1.1 not working on 64-bit versions of Windows. When sqldeveloper.exe is executed, a very unhelpful error dialog stating "The application failed to initialize properly (0xc00000018). Click on OK to terminate the application" is displayed.
While there is a workaround that involves running the sqldeveloper.bat file in the \sqldeveloper\bin subdirectory, it is a bit inconvenient and requires the user to discover this workaround. Furthermore, SQL Developer 1.0 did not have this problem, so it is a bit puzzling as to why the problem was introduced with SQL Developer 1.1 and why it is still not fixed with the latest patch.

I can confirm that we have a fix for this problem. I'm not sure when this fix will be available in SQL Developer.
The bug was introduced in 1.1 due to optimizations in the way that the native Windows launcher works to better support products like SQL Developer.
Thanks,
Brian

Oracle Applications 11i Export to Excel does not work.

The export button does not work. When I click on export it says complete but does not bring up a window asking me to save. I have pop up blocker off and the site added to trusted sites. I have tried everything I have found so far but no luck. Help would be much appreciated.....thanks!!!!

Please post the details of the application release, database version and OS.
The export button does not work. When I click on export it says complete but does not bring up a window asking me to save. I have pop up blocker off and the site added to trusted sites. I have tried everything I have found so far but no luck. Help would be much appreciated.....thanks!!!!Was this working before? If yes, any changes been done recently?
Can you reproduce the issue from other browsers/machines?
Can you find any errors in the database log file?
Please see these docs/links.
Troubleshooting Export and Attachment issues in Oracle Applications 11i [ID 338651.1]
Attachments and Exports, a Troubleshooting Guide [ID 135444.1]
Export To Excel: How To Activate Debugging? [ID 464469.1]
How to Troubleshoot Forms Hanging Using Export Functionality [ID 423261.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=Troubleshoot+AND+Export&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Troubleshooting+AND+Export&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Export+AND+Excel&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Caching AD login credentials not working with 10.5.5

Hello all,
We are trying to add our Mac clients running OSX 10.5.5 as workstations in our Windows Domain (we are running AD in Windows 2003 native mode). I can add the Mac workstation to authenticate against the domain but login will only work if the Mac client is connected to our network.
On a Windows laptop that is a member of the domain, if you are off the network and it can't reach a domain controller it will used cached credentials.
I read that this should work in chapter 6 titled "Active Directory Integration" in the document linked off of Apple's site named "Leveraging Active Directory on a Mac OS X".
Here is the link to that doc http://www.bombich.com/mactips/activedir.html
Here are the steps I followed to add the Mac client to the domain.
1. On the Mac go to "Applications" --> "Utilities"
--> "Directory Utility".
2. Click on "Services" and check off the Active Directory
plugin.
3. Double click the Active Directory plugin and enter in the
following
"Active Directory Forest:" Leave as default
"Active Directory Domain:" wheatonma.edu
"Computer ID:" computername_here
View the Advanced Options and enter in the following.
Under "User Experience" check the "force local home directory on startup disk" option.
I selected the Create mobile account at logon field so that Mac users can logon
with cached credentials when they can't reach a domain controller or are away from the network.
I deselected the Require Confirmation field, because I want all the Mac users on this machine
to use mobile accounts.
Also uncheck the next option "Use UNC path from Active Directory to derive network home location"
Also uncheck the "Default user shell".
Under the "Mappings" tab check off "Map UID to attribute" and change the attribute to "sAMAccountName".
Under the "Administrative" tab uncheck the option "Prefer this domain server".
Also under this tab make sure the "Allow Administration by:" option is checked
off and the following 3 entries should be added (along with the new owner of the mac)
WC\domain admins
WC\enterprise admins
WC\bgibson
Click "Bind" and it will ask you for the local admin's password, enter it.
It will then ask you for the following
Username: Enter in the domain admin username
Password: Active Directory password for the user above.
Computer OU: ou=wheatonmacintoshclients,dc=wheatonma,dc=edu
Check off the option named "use for authentication" and uncheck the "use for contacts". Hit "OK".
4. Exit out of the Directory Utility and reboot the computer. Login using the "other" name
and enter in your domain username and Active Directory password.
We do not want to setup an Open Directory and sync data from our domain controllers. All we really need is the ability for the Mac client to authenticate into the system.
Thanks

Hi Templeton, thanks for the suggestion. I had been on that site before. I had called Apple as part of our school's support package and they had suggested that we look at that site... I should have mentioned it earlier. I have the new 10.5.5 laptop binding to AD okay but only when it is plugged into the network. It still will not cache the credentials for when I am offline and trying to login.

Web Disparcher 7.41 patch 43 standalone redirect not working

Hello,
I was hopping to find a solution posted here. I am using standalone web Dispaterchers pointing to two NW 7.40 backend systems. SAP Web Dispatcher with a 7.41 patch 43 version.
w05adm 55> sapwebdisp -v
SAP Web Dispatcher Version 7.41.0, multithreaded, ASCII, 64 BIT
kernel information
system name          =
kernel release       = 741
kernel make variant = 741_REL
DBMS client library =
compiled on          = Linux GNU SLES-11 x86_64 cc4.3.4
compiled for         = 64 BIT
compilation mode     = Non-Unicode
compile time         = Jul 11 2014 23:31:22
update level         = 0
patch number         = 43
source id            = 0.043
Profile files in the attachment. Trace:
WebSocketPlugInInit: WebSocket Plugin initialized
[Thr 47418910971664] IcmAddHiddenService: Hidden service WEBSOCKET started
[Thr 47418910971664] Started service HOST=WDhost.com,PORT=8100,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 47418910971664] Started service HOST=localhost,PORT=8100,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 47418761521920] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 0
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 1
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 2
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 3
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 4
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 5
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 6
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 7
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 8
[Thr 47418761521920] IcmCreateWorkerThreads: created worker thread 9
[Thr 47418910971664] IcmWatchDogThread: watchdog started
[Thr 47418918024976] Fri Aug 8 18:12:06 2014
[Thr 47418918024976] *** ERROR => IcrAttachToServer('!DIAG') failed 4 [icrxx.c      4011]
[Thr 47418918024976] *** ERROR => IcrAttachToServer('!DIAG') failed 4 [icrxx.c      4011]
[Thr 47418918024976] *** ERROR => IcrAttachToServer('!DIAG') failed 4 [icrxx.c      4011]
[Thr 47418918024976] *** ERROR => IcrAttachToServer('!DIAG') failed 4 [icrxx.c      4011]
When I was open http://WDhost.com:8100/host1/sap/bc/gui/sap/its/webgui?sap-client=001 or http://WDhost.com:8100/host2/sap/bc/gui/sap/its/webgui?sap-client=001
Service cannot be reached
What has happened?
URL call was terminated because the corresponding service is not available.
Note
The termination occurred in system with error code 404 and for the reason Not found.
What can I do?Please select a valid URL.
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
I tried to update the kernel patch level, but it did not help. I create logon group in my ABAP system.

Your rules are wrong, if you want to match "/" you have to escape it meaning "\/". That said, you should rather have a DNS alias for each system in order to keep the setup lean.
Edit: once you have the rule working, you will still either have to configure hostX in the backend as a virtual host or have other rules removing it from the URL. That said I don't think you need that level of complexity, better have distinct DNS aliases then there is no need for that complexity.

JRE 7 Patch-in-Place Configuration not working as documented

According to all of the documentation I have read, the default JRE installation mode is patch-in-place.
http://docs.oracle.com/javase/7/docs/webnotes/install/windows/jre-installer-options.html
http://www.oracle.com/technetwork/java/javase/jre-install-137694.html
http://docs.oracle.com/javase/7/docs/webnotes/install/windows/patch-in-place-and-static-jre-installation.html
However, after either manually installing JRE 7 to a specific installation directory (e.g. not on C:), or by specyfying the the INSTALLDIR on the command line, a subsequent JRE 7 update will uninstall the previous JRE from the desired installation location and install the current JRE in the default location (i.e. C:\Program Files\Java\jre7).
Is there some magic installer switch, registry entry, configuration file, etc. that will force the JRE installer to upgrade the existing installation in its existing location?
Note - these are not static instllations. Also, I am working with the 64-bit version; I don't know if the same applies to the 32-bit version, as I have not tested it because I require the 64-bit version.
-Jeff

At this site there is an explanation of this issue: probably LabVIEW don't support partial scrolling.
If I understood what they write, in Intellimouse 8.0 and above, Microsoft implemented a kind of patch for applications that don't support partial scrolling.
And so without Intellimouse, none of these applications supports partial scrolling.
I'll try to install the latest version of Intellimouse, but I think NI developers should patch LabVIEW to support partial scrolling. On the same site MS gives a link to the MSDN information dedicated to developers on how to handle partial scrolling.
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

Dunning Wizard - Adding customers not working

Hi all,
We're trying to run the dunning wizard, but are unable to add customers in step three. There are no error messages. The BP Properties dialogue box appears when the 'Add' button is clicked, we can select customers , but when 'OK' is clicked, no customers appear in the list. If we click 'Next', it says 'no customers were selected' in the system messages. I have attempted this user the manager account, and another colleague has tried it with the same results and he has superuser.
Cheers,
Nick
B1 8.08

Hi,
You need to check every customer profile to see whether Dunning Term field in Business Partner Master Data >> Payment Term Tab is defined or not. Make sure assign with dunning term.
Your problem will be solved.
Hope this helps,
TVSon

SNMPv3 Priv Credentials not working for CUCM Discovery

Hello Support Team
Im testing and practicing this week the CPC Small Demo and it seems that when I configure the SNMPv3 Priv Credentials (even with DES) for discover my CUCM, even if I configure the same priv credentials in Serviceability.
However, If I didnt configure the priv credencials, the CPC discover of CUCM works, this now presents the security risk that all the messages between the manager and agent are in plaintext ¿dont it?
I attach the screen with the configurations in CUCM and CPC, with the discovery errors.
Thanks for your help and advice.
Best Regards.

Are you allowing IMAP access into CUC? you set this in the "Voicemail Users" Class of Service on CUC, so it will apply for all users once the COS is changed.
Also you might want to set the Credentials source for voicemail service, on CUPS to "CUP"

Digital Library log in credentials not working

I created my BestBuy.com account and am able to login to it. I've checked my account information which I think to be correct. I received an email that my order is ready, but I have the error "The e-mail address and password entered do not match our records. Passwords are case-sensitive. Please try again.". I'm at a loss what to check or try next to correct my login issue.

Hello bbcust111,
Purchasing the digital download version of a game through Best Buy’s Digital Library should be a quick and convenient way to get you playing as soon as possible. I’m really sorry that you’ve been having issues logging in to your account and I’d like to see if I can assist.
It looks like you contacted another one of our customer service channels earlier today and they were able to help you access your game through an alternative method. Hopefully this worked out and you’ve been able to download it since then. Please let me know if you still need additional assistance and if you’re still unable to log in to your Digital Library account. If you are, I may have a way to help you access your account for any future purchases.
Thanks for connecting with us on the forum, and please feel free to let me is I can still be of assistance.
Sincerely,
Matt|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Apple tv patch 6.1.1 extended desktop not working

My apple tv just upgraded to patch 6.1.1(6698.99.19) from 6.1(6698.99.19)
I have an Ipad Mini2 which I normally use to view movies on my tv.
I will select the apple tv, (with air play) and play the movie using Moliplayer on the Ipad mini2.
I was able to play from a mac pro I have in my office if I wanted to.
This used to work great as the apple remote controlled the movie and you could set the ipad mini2 down on the desktop.
After the patch, the above does not work. What happens, is the movie is not played.. however an audio icon pops up on the apple-tv
and you can hear the movie audio.
So after this patch, you can only view the movie with mirrored desktop selected after this latest update.
Both the apple mini2 and the mac pro produce the same result.
Additional steps..
I have taken the apple tv and used Itunes to re-install the software with a USB cable. Unfortunately .the same result.
I assume I have a bug I am reporting that can be logged.
Additionally. is it possible to put back the older version of the software so the apple TV will work as before?
Thanks

I have the exact same problem aswell. Did the update from 6.1 to 6.1.1 on my Apple TV 3rd gen. When using my iPhone 5 showing pictures och videos from my camera roll it works just fine over Airplay. So the problem is not the transmission. When playing a video from my Synology NAS using VLC for iOS nothing happens on my Apple TV like it did before the update! Annoying
Thanks

G550 Intel TV Wizard/HDMI not working

Hi Support,
G550, Where it comes under? Under which series it comes?
Is it IDeaPad or THinkpad?
WHere can i search for this G550 Support.
I facing the problem of Intel TV Wizard which is not working and i could not connect to TV trhough HDMI port.
http://www.intel.com/support/graphics/sb/CS-004653.htm
I can see figure3 in the above url in laptop but could not see the tv display.
I am need of this help.
Help me sombody.
Regards,
Umadhar M
My Laptop configuration is: 2.2Ghz DUal COre, WIndows 7 32 bit, 3GB Ram, 320GB Hard disk, 15'6" .
Moderator edit: Moved post from General Discussion board, changed subject to match question, added system info from duplicate post.

Thx! This looks like a good link. Somehow I got it to work without any tricks, it just worked all the sudden. Frikkin computers! I'm very surprised I have to choose audio-source when I connect my MacBook to my TV, I naively hoped that this was going to work out for itself (magically) once I've connected those two and chosen screen output.
U live an learn!

TLS patch not working

Hi all!
I'm trying to apply a patch and it's not working. I've searched the web, metalink included and nothing... plus, the version numbers confuse me. Please advise.
Thanks in advance!
Here goes the apply verbose output (I'm sorry for the long output):
[oracle10@as1 6370967]$ opatch apply -verbose
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : /opt/oracle/product/10g
Oracle Home Inventory : /opt/oracle/product/10g/inventory
Central Inventory : /opt/oracle/oraInventory
from : /etc/oraInst.loc
OUI location : /opt/oracle/product/10g/oui
OUI shared library : /opt/oracle/product/10g/oui/lib/linux/liboraInstaller.so
Java location : /opt/oracle/product/10g/jre/1.4.2/bin/java
Log file location : /opt/oracle/product/10g/.patch_storage/<patch ID>/*.log
OPatch Version 1.0.0.0.63
Perl Version 5.008003
Performing pre-patch installation checks.
.patch_storage exists, checking its perms and changing it if necessary.
Creating log file "/opt/oracle/product/10g/.patch_storage/6370967/Apply_6370967_03-26-2010_15-15-05.log"
Starting OPatch Apply session at 03-26-2010_15-15-05.
Command arguments parsed by OPatch are: apply -verbose
OPatch version is: 1.0.0.0.63
The contents of the file: /etc/oraInst.loc
inventory_loc=/opt/oracle/oraInventory
inst_group=oinstall
Performing RAC prerequisite checks...
Accessing inventory ... (retry 10 times, delay 30 seconds each time)
System Command: /opt/oracle/product/10g/jre/1.4.2/bin/java -Doracle.installer.invPtrLoc=/etc/oraInst.loc -Dopatch.retry=10 -Dopatch.delay=30 -classpath "/opt/oracle/product/10g/oui/jlib/OraInstaller.jar:/opt/oracle/product/10g/oui/jlib/srvm.jar:/opt/oracle/product/10g/OPatch/jlib/opatch.jar:/opt/oracle/product/10g/oui/jlib/xmlparserv2.jar:/opt/oracle/product/10g/oui/jlib/share.jar:/opt/oracle/product/10g/jlib/srvm.jar" opatch/O2O "/opt/oracle/product/10g" "/opt/oracle/product/10g/oui" opatch.pl 1.0.0.0.63
Result:
output to OPatch:
NODE_LIST=NULL
NODE_COUNT=0
LOCAL_NODE=NULL
IS_CFS=0
RAC_CODE=0
HOME_INDEX=1
This is not a RAC system
Backing up the rollback script as "/opt/oracle/product/10g/.patch_storage/6370967/rollback_6370967.sh_03-26-2010_15-15-06"
Interim Patch ID: 6370967
Checking the patch inventory.
Component Name: oracle.rdbms.rsf
Component Version: 10.2.0.3.0
This is a rolling patch.
Bugs fixed by this patch 6370967:
6370967 : TLS 1.0 HANDSHAKE FAILS WHEN THE CLIENT IS RUNNING ON VISTA
Reading patch XML files and doing sanity checks.
Read the command to action file map.
Performing initial safety check.
Oracle Configuration Manager (OCM) is included with this release of OPatch.
This is a OCM patch.
Home has OCM installed but not configured.
Invoking fuser to check for active processes.
Skipping invocation of fuser on "/opt/oracle/product/10g/bin/oracle" as the file does not exist or is a directory.
Checking active processes:
Accessing inventory ... (retry 10 times, delay 30 seconds each time)
System Command: /opt/oracle/product/10g/jre/1.4.2/bin/java -Doracle.installer.invPtrLoc=/etc/oraInst.loc -Dopatch.retry=10 -Dopatch.delay=30 -classpath "/opt/oracle/product/10g/oui/jlib/OraInstaller.jar:/opt/oracle/product/10g/oui/jlib/srvm.jar:/opt/oracle/product/10g/OPatch/jlib/opatch.jar:/opt/oracle/product/10g/oui/jlib/xmlparserv2.jar:/opt/oracle/product/10g/oui/jlib/share.jar" opatch/CheckConflict "/opt/oracle/product/10g/oui" "/opt/oracle/product/10g" opatch.pl 1.0.0.0.63 6370967 "6370967 " "/home/oracle10/ano/as/9_patch_6370967/6370967/etc/config/actions" "/home/oracle10/ano/as/9_patch_6370967/6370967/etc/config/inventory"
Result :
MISSING_COMPONENT : oracle.rdbms.rsf, 10.2.0.3.0
MISSING_COMPONENT : oracle.rdbms.rsf, 10.2.0.3.0
ERROR: OPatch failed during prerequisite check.
And the lsinventory output:
[oracle10@as1 6370967]$ opatch lsinventory
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : /opt/oracle/product/10g
Oracle Home Inventory : /opt/oracle/product/10g/inventory
Central Inventory : /opt/oracle/oraInventory
from : /etc/oraInst.loc
OUI location : /opt/oracle/product/10g/oui
OUI shared library : /opt/oracle/product/10g/oui/lib/linux/liboraInstaller.so
Java location : /opt/oracle/product/10g/jre/1.4.2/bin/java
Log file location : /opt/oracle/product/10g/.patch_storage/<patch ID>/*.log
Creating log file "/opt/oracle/product/10g/.patch_storage/LsInventory__03-26-2010_15-11-32.log"
Result:
Installed Patch List:
=====================
1) Patch 8555288 applied on Fri Mar 05 15:52:21 WET 2010
Unique Patch ID: 11437032
[ Bug fixes: 8555288 ]
OPatch succeeded.
###############################################3

Tell us about the product, type of OAS, version and what patch are you trying to apply.
Frankly, digging from the logs of your output some of this information and you would get fewer responses than what you would get if you introduce your system.
thanks,
AMN

Fresh CS4 install, adobe updater not working. How do I install updates?

I just re-installed the CS4 suite (except Acrobat) on my mini after getting that 30:150 "license not working" error. My license now appears to be working and I can open the applications. I'd like to apply update patches, but Updater is not working. Should I go out and install Updater 6.2? I have seen others on this forum told to update manually instead; I started that process but got spooked when the files I downloaded didn't seem to match Adobe's installation instructions. Specifically, the instructions say to click "adobe photoshop updater," but the downloaded file is "setup.app." Is this the correct app to open? And if it is, should my first update be the 11.0.1 /multiple languages? Thanks!

thanks for the quick reply, Ned. Can you tell me whether opening setup.app is the correct way to apply the update? As I mentioned above, that didn't seem to jibe with Adobe's instructions.

Tuner Not Working

Actually, I can make it "function" .... but I can't find a way to incorporate it into my performances so it behaves properly. I just want to map a footswitch so I can tune my guitars, and want tuning available in each patch. Nothing unreasonable.
If I map the tuner action at the Concert or Set level, it will work but ONLY in Edit mode; not Perform mode. Worse, it won't work at the Patch level, where its really needed. And, if I try mapping the tuner action at the Patch level, it does not work at all, in any mode.
I have read older posts mentioning copy and alias work arounds, but these are not practical in my case, and my channel strips are already completed and logical.
Has anyone discovered a usable workaround, or am I doing something wrong?

Good point, bemuzed. Yes, that was definitely a part of the puzzle, and when I did my aliases, had to make sure I had the tuner badge showing (1st channel strip). I personally think Apple needs to do a little work on the tuner function, for sure, but it can pushed around to do what you want (especially for guitarists needing tuning on each patch). The good thing is that the tuner is very accurate and easy to read!
I also wish there was a simple setting for the tuner so that it doesn't mute the output when you tune. I like the old school singer/songwriter style of talking to the audience while you hear the guitar being tuned. Nostalgia, I guess.

11i Patch Wizard - MOS credentials not working

Similar Messages

Maybe you are looking for