11xx able to handle multiple SSID's and encryption?

Has anyone configured a 11xx series AP with 3 SSID? and more importantly can I have 1 SSID WEP and the others WPA? I have a client that wants to use VoIP phones that only support WEP, but I would like the guest and LAN SSID VLAN to use WPA...
Any comments welcome,
Chris Serafin
[email protected]

Hi Chris
Since WEP and WPA uses uses different encryption standards, it would not be possible to configure 2 different SSID's on the same AP with different encyrptions on them. Reason is that whatever encyrption you apply on the AP, applies to the radio inteface not to a specific SSID. BUT you can always uses VLAN's on the AP (if you have VLAN's configured on the switch) and then you will find the option to configure a different encryption for a every VLAN and further you can map those VLAN's to your respective SSID's.
In your scenario, you can configure 3 VLAN's on the AP and map them to 3 different SSID's and then configure WEP on one VLAN for VOIP phones and configure WPA on other 2 VLAN's for your guest users.
Hope the above information helps.
Basant

Similar Messages

Urgent : OBIA - Handling multiple Global, Local and Document Currencies

All,
I need input on how to configure multiple currency codes in DAC for OBIA 7.9.6.x
My client's business goes around the the world and with multiple local currencies.They also need reporting currency to be multiple like in Euro, USD etc.
I went through a couple of threads in this forum,like -
Re: Configuring Global Currencies in BI Apps 7.9.6 for EBS 11.5.10 Source
Re: How we are using Global, Local and Document Currencies in DAC.
But I have some confusion regarding the configuration of DAC's 3 Global currency codes.
In order to fulfill my requirement - should I add additional codes in DAC?
Basically How am I supposed to handle multiple Local,Document and Global currencies? And then possible changes in rpd/reports required also?
Regards,
Krish

Currencies are discussed in the Setup and Configuration Guide here:
7.1.1.2 How to Configure Global Currencies
To configure the global currencies you want to report in your warehouse:
In the DAC Client, display the Design view.
For more information about logging into the DAC, see Section A.1, "How to Log Into the DAC Client".
Select a container from the drop down list to the right of the Execute button.
Display the 'Source System Parameters' tab.
Locate the following parameters and set the currency code values for them in the 'Value' box:
$$GLOBAL1_CURR_CODE (for the document currency).
$$GLOBAL2_CURR_CODE (for the local currency).
$$GLOBAL3_CURR_CODE (for the global currency).
Make sure that you spell the currencies as they are spelled in your source OLTP system.
Save your changes.
As far as for PLP items, those are Post Load Processing elements that perform cleanup tasks after the Base Warehouse tables have been loaded. They should never be modified and frankly run without any issues provided the rest of the plan executes properly. Do you have a specific quesiton about a PLP?

HT2490 how do i change my settings for iMessage on an iMac? I want to be able to use multiple email accounts and cell number as well.

how do i change my settings for iMessage on an iMac? I want to be able to use multiple email accounts and cell number as well.

Open Messages and choose Preferences from under the menu bar program's name and add source accounts to use.

The "right" way to handle multiple devices, accounts and the cloud?

Perhaps a bit premature, but I figure it's never too early to start planning.
Here's our current setup - I currently have four iDevices in the faily (three iPhones and one iPod Touch. All are syncing to the same Mac Mini, albeit with different logins (and different iTunes store ids). All four of these are kept in sync via Home Sharing so we have access to the music/apps/etc acquired by the others.
Enter the iCloud - how does this fit in? What's the *right* way to do this?
I can see two options:
1)     Continue to utilize four iTunes store ids, sync them via Home Sharing and add four iClouds
     Advantages
          totally independent devices, users, etc.
     Disadvantages
          must pay for four "iTunes Match" services to access non-iTunes music on each of the four devices
          will iTunes-purchased music automaticaly sync to iCloud if it is shared via Home Sharing (or only by the original purchaser)?
2)     Use one iTunes Store id for all iDevices
     Advantages
          single point of acquisition and distribution for all devices
     Disadvantages
          need to find a way to merge IDs (is this even possible?)
Are there other advantages/disadvantages to these options? Are there other options? What's the easiest to set up and support? Any other thoughts?
Thanks in advance for your input.

Well it seems like the first thing you should do is consolidate your iTunes libraries so that you don't have 4 copies of everything, one for each user logged in to your Mac Mini. How you do that is consolidate all 4 iTunes folders to one folder located in the /Users/Shared/ folder and update each of your iTunes to point to that folder accordingly. That way you have one iTunes library, only one copy of your media, but accessible from multiple users.
One caveat is that if somebody is logged on and has iTunes open, you can't fast switch to another user and open iTunes. Apple made it so that only one user and one instance of iTunes can open a iTunes library at a time.
For your iTunes match situation, it does sound like you would be much better off sharing a single Apple ID with one iTunes Match. For consolidating, make sure you have everything everybody has shared via Home Sharing to the main account you'd like to move over to, and then simply go to each device Settings, Store, and the sign out of the original Apple ID and logon using the shared main Apple ID. I just looked at it and the automatic downloading is already live in iOS! You can specify if you want to do music, apps, and books separately in case you may want to automatically download music but not apps or books.

How to handle multiple spatial operators and\or-ed in 10g express(locator)?

I've noticed that I cannot run certain queries in 10g express, which run perfectly in 10g enterprise.
The following query is an example:
SELECT S_ID, SDO_NN_DISTANCE(1) from MAP.BYGG_POLY
where
SDO_WITHIN_DISTANCE(GEOM, mdsys.sdo_geometry(2001, NULL, sdo_point_type(441702.780259307,6445401.66207384,NULL), NULL, NULL), 'distance=17.4620649504359') = 'TRUE'
AND
SDO_NN(GEOM, mdsys.sdo_geometry(2001, NULL, sdo_point_type(441702.780259307,6445401.66207384,NULL), NULL, NULL), 'sdo_num_res=10', 1) = 'TRUE';
In the express edition the query results in an error message:
ORA-13249: SDO_NN cannot be evaluated without using index
But if I split the select into two seperate selects, I get no error:
SELECT S_ID from MAP.BYGG_POLY
where
SDO_WITHIN_DISTANCE(GEOM, mdsys.sdo_geometry(2001, NULL, sdo_point_type(441702.780259307,6445401.66207384,NULL), NULL, NULL), 'distance=17.4620649504359') = 'TRUE';
SELECT S_ID, SDO_NN_DISTANCE(1) from MAP.BYGG_POLY
where
SDO_NN(GEOM, mdsys.sdo_geometry(2001, NULL, sdo_point_type(441702.780259307,6445401.66207384,NULL), NULL, NULL), 'sdo_num_res=10', 1) = 'TRUE';
Moreover I've found that inner select also seems to work as a workaround.
So the following query is valid in the express edition:
SELECT S_ID, SDO_NN_DISTANCE(1) from MAP.BYGG_POLY
where
SDO_NN(GEOM, mdsys.sdo_geometry(2001, NULL, sdo_point_type(441702.780259307,6445401.66207384,NULL), NULL, NULL), 'sdo_num_res=10', 1) = 'TRUE'
AND
S_ID in (
SELECT S_ID from MAP.BYGG_POLY
where
SDO_WITHIN_DISTANCE(GEOM, mdsys.sdo_geometry(2001, NULL, sdo_point_type(441702.780259307,6445401.66207384,NULL), NULL, NULL), 'distance=17.4620649504359') = 'TRUE');
Could someone please explain to me why the first query is invalid in the express edition?
...or am I doing something wrong?

SDO_RELATE returns some strange results though.
If I use mask=inside for a given query I get 69 rows, and for mask=overlapbdyintersect I get 15 rows.
But if I use mask=inside+overlapbdyintersect, I only get 50 rows.
Then again if i use UNION ALL, for speed as the manual hints about, I get 84 rows as result if I combine the two.
Isn't this a bit odd?
Any explanation for this kind of behavior?
examples:
INSIDE(69) + OVERLAPBDYINTERSECT(15) = 50 (Strange)
SELECT count(S_ID) from MAP.BYGG_POLY
where
SDO_RELATE(GEOM, SDO_UTIL.FROM_WKTGEOMETRY
*('Polygon((441029.298070891 6445795.42259877, 441320.756519155 6445767.05053744, 441318.177240852 6445527.17765524, 441029.298070891 6445795.42259877))'),*
*'mask=INSIDE+OVERLAPBDYINTERSECT') = 'TRUE'*
INSIDE(69) + OVERLAPBDYINTERSECT(15) = 84 (Correct)
SELECT S_ID from MAP.BYGG_POLY
where
SDO_RELATE(GEOM, SDO_UTIL.FROM_WKTGEOMETRY
*('Polygon((441029.298070891 6445795.42259877, 441320.756519155 6445767.05053744, 441318.177240852 6445527.17765524, 441029.298070891 6445795.42259877))'),*
*'mask=INSIDE') = 'TRUE'*
UNION ALL
SELECT S_ID from MAP.BYGG_POLY
where
SDO_RELATE(GEOM, SDO_UTIL.FROM_WKTGEOMETRY
*('Polygon((441029.298070891 6445795.42259877, 441320.756519155 6445767.05053744, 441318.177240852 6445527.17765524, 441029.298070891 6445795.42259877))'),*
*'mask=OVERLAPBDYINTERSECT') = 'TRUE'*
Edited by: Oraly on Sep 2, 2009 5:32 AM
Edited by: Oraly on Sep 2, 2009 5:34 AM

Is it possible to do multiple ssids and encryptions on an autonomous AP without vlans?

I got a customer who just has autonomous APs. They are upgrading from 1210s to 1262s. They are currently running a config that is wide open with no authentication or encryption and using a VPN tunnel on the wireless clients for security. They want to switch to using WPA2/PSK with the new APs. They have existing clients that have to continue to work during the upgrade to the new APs. They run 3 shifts so it is a 24 hr operation with no downtime. What I was thinking would be to configure the 1262 with multiple SSIDs, one with their existing settings and one with the new. Then I could swap the APs one at a time and it would only impact service for a short period of time while I was mounting the new AP. Then once all the new APs are installed I could transition the clients over to the new SSID and encryption then disable the old SSID once all the clients are switched over. I've done this before with a WLC but not with an autonomous APs. The only config examples I can find uses VLANs. This customer is not using VLANs. Is there anyway to use multiple SSIDs with different encryption on a single radio on an autonomous 1262 without VLANs?
The site has about 30 APs and 100 clients. Yes I know a controller would be preferred for a site of this size but that is a question for sales and why they didn't see them a controller. I just get stuck with what they sell them.
thanks

Hi Don,
Im afraid on the autonmous platform you can not map multiple WLANS to a single vlan.
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

Handling Multiple checkboxes iin ALV list??

Hi,
I have a requirement of generating a list with multiple checkboxes corresponding to each line/row of the list..Based on the selection of some/all the rows of the list I have to invoke some functionality on the click of some button..
I am able to get the chk-boxes on the list also i have got the button on the std PF-status of ALV list, but I am not able to handle multiple selection of the chk-boxes??
plz help..

On the field catalog definition for the amount field pass CFIELDNAME as the <currency> fieldname. if this is maintained, i would assume it will solve your issue.
Say for example, the amount field is AMOUNT and the corresponding currency fieldname is 'CURRENCY', the field catalog for this field should be filled in something like this.
t_fieldcat-fieldname = 'AMOUNT'.         "amount field name
t_fieldcat-tabname = 'IT_FINAL'.           "internal table name
t_fieldcat-cfieldname = 'CURRENCY'.   "currency field name which will be referred
append t_fieldcat.
Hope this helps.
Thanks,
Balaji

Is it or has it ever been possible to select multiple PDF's and print into a single print stream using Reader

We have Multiple users who claim they have been able to select multiple PDF's and select print. It then would send to a single stream and end up as one document. These are reader users.
We have tested under reader 10.1.4 and 11.0.06 and haven't been able to make it work. Has this ever been possible?

Thanks everyone. That's what I needed to know.

IMovie to handle multiple video tracks?

Would iMovie also be able to handle multiple video track? (like in a split screen format, but not in the form of the template)

For example, here's how to do a split screen.
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov3a61cda3.html
Matt

I am wondering about transferring my pc date to my new iMac. I know there is a migration assistant, but I have multiple drives in my pc. Will the migration assistant be able to handle this?

I know there is a migration assistant, but I have multiple drives in my pc. Will the migration assistant be able to handle this? I'm going to be trying to move the date to a new imac 27' with fusion drive.

the following set of instructions is a little longer, so you might want to print it out and have it handy
Step 1 - PC
If your PC already is connected to the Internet, hold down the Windows button on
your keyboard and simultanously press R. Into the opening window enter "cmd" (without
the quotation marks). A command line will open, enter "ipconfig" (again without the
quotation marks) at the prompt. Now find the section labelled "Ethernet-Adaptor" and
note the values for IP-Address, Subnet-Mask and Default-Gateway on a sheet of paper
If your PC is not already connected to the internet, you need to manually configure its IP address.
open Network and Sharing Center
do a right click on Ethernet and select Properties
in middle of the screen there is a box labelled "This connection uses the following items"
out of this box select "Internet Protocol Version 4 (TCP/IPv4)"
click on the Properties button in the right corner
Into the window "Use the following IP address" enter the following values
IP-Address: 192.168.0.1
Subnet-Mask: 255.255.255.0
Default-Gateway is the IP-Address of your Router. This value is needed for internet connection, for the file sharing setup only this value can be left empty.
Step 2 - Mac
If your Mac already is connected to the internet, it is likely that it has automatically receive the necessary parameters from your router and therefore should be in the same network as your PC. To be on the safe side, you can check this by
open System Preferences
select Network
choose Ethernet from the panel on the left side of the window
click on Advanced
click on TCP/IP
compare the values for IP-Address, Subnet-Mask and Default-Gateway with those you wrote down earlier.
If both PC and Mac have identical numbers in the first three parts of the IP-Address, you are set.
If your Mac is not already connected to the internet, you need to manually configure its IP-Address as well.
In the TCP/IP window you have just opened select "Manually" from the drop down menu "Configure IPv4:"
Enter the following values
IP-Address: 192.168.0.2
Subnet-Mask: same as with PC
Default-Gateway: same as with PC
Step 3 - Activate File Sharing on PC
open Control Panel
select Network and Internet
select Network and Sharing Center
on the left panel select change advanced sharing settings
in the middle of the new page enable turn on file and printer sharing
Step 4 - Activate File Sharing on Mac
open System Preferences
select Sharing
set check mark next to File Sharing (green circle appears on the right side next to File Sharing:)
click on Options:
set check mark next to Share files and folders using SMB
in the listbox under the text Windows File Sharing make sure there is a check mark next to your account name
Step 5 - Create a share on your PC
In Explorer select the folder you wish to share
do a right click on that folder and select "Share with"
choose "Specific people"
a new window opens. there select your Windows username (usually the first in the list)
if you plan to copy from Windows to Mac only, it would be sufficient to grant Read permission only, but, since most likely you are the only person to access that share and certainly do not plan to sabotage yourself, Read & Write permission is ok too.
finally click on "Share"
Step 6 - Create a share on your Mac
Once the check mark next to your account name is set (see above) your home directory is automatically set as a share.
Step 7 - Connect your PC to your Mac-Share
do a right click on the network icon which resides on your desktop or in the left
panel of every Explorer window
Select Connect Share
in the text box next to Folder: enter \\<ip-address-of-your-mac>\<your-osx-username>
if you are using the same username and password on both Windows and OSX click on "Finish",
if not set the check mark next to "Connect using different credentials" afterwards click on "Finish" A new window will open where you enter username and password that you are using with OSX
Step 8 - Connect your Mac to your PC-Share
hold down the command key and press K simultanously or in Finder click on Go in the menu at the top of your screen and select "Connect to Server"
in the Window that opens enter smb://<your-windows-username>:<your-windows-password>@<ip-address-of-your-PC/<y our-windows-username>
or
smb://<ip-adress-of-your-PC/<your-windows-username> you will be asked to enter your Windows username and password in popup window
Now you have both computers connected to each other. Each will provide you access to your home directory of the other computer. Open a second Explorer or Finder window with your local home directory and start copying

I need to host a Shared PDF on SharePoint. If it is on SharePoint can only one person comment at a time? I know documents have to be checked out when using SharePoint. I need multiple users to be able to comment in real time and see comments in real time.

I need to host a Shared PDF on SharePoint 2010. If it is on SharePoint can only one person comment at a time? I know documents have to be checked out when using SharePoint. I need multiple users to be able to comment in real time and see comments in real time. Is this possible?

try here:
http://www.bbb.org
File a complaint with them. Verizon will call you to fix the blunder.
But remember it is always up to the customer to insure what they are getting and what it costs. Don't trust the word of a sales person who makes their living on getting that sale. Lies, deceit or false promises will be and have been used by sales people for thousands of years.
Good Luck

Single access point with multiple ssids and single channel possible?

Hi everybody.
I have this silly question.
Let say we have three vlans, vlan1,2,3 and they are mapped to wlans as follows:
Vlan 1 ssid1
Vlan 2 ssid2
Vlan3 ssid 3
AP --------trunk------Switchted network.
Our Ap has mobile devices in three wlans, i.e ssid1ssid2 and ssid3
Since AP uses half duplex mode, mobile devices need positive ack from ap before they can send data, therefore once channel let say channel 3( assuming 802.11b is used) can be shared by all mobile devices in three wlans.
Is my understanding correct?
Thanks and have a great weekend.

Hii ,
Yes ,that is pretty much possible as suggested by other experts on board. Depending on your access point you will have 1 (2.4 GHz) or both 2.4 & 5GHz radios.
You can configure multiple SSIDs (up to 16 ) known as MBSSID mode in autonomous environment. In Controller based architecture you can configure up to 512 WLAN (SSID) and transmit any 16 of them per AP (using AP group feature). However , it is recommended to keep multiple SSID count below 8 as for each SSID separate beacon will be sent on air which consumes more air time.
Hope this helps
Thanks
Vinay

WAP200 and .1x/radius authentication with multiple SSIDs

Apparently it's not possible to define more than a single radius server when using multiple SSIDs with WAP200. Unfortunately WAP200 doesn't add the name of the SSID as a radius attribute, so it's not possible to make distinction whether the user is trying to log in to SSID A or B. Does anyone have any ideas or workarounds for this limitation? Of course the best solution would be if Cisco/Linksys fixed the firmware so that the SSID of the logging in user would be sent to the radius server as an extra attribute or appended to the client mac address.

Security option for an SSID can be unique and can be configured when you configure a SSID or under VLAN . Note that each vlan is uniquely mapped to induvidual SSID.

Multiple SSIDS and disappearing

We have Cisco 3602i access points for the most part, all of which advertise multiple SSIDs.
Very occasionally we see an SSID completely disappear from view, even though others remain solid (I can't say it's all devices as the majority of people who raise the issue have apple devices, but there are the odd one or two who use Windows laptops).
Also, the RSSI seems to fluctuate wildly.
I should add that we have disabled up to 11mbps data rates on the controller and we're running 7.6.100.0 currently, but plan to upgrade to 7.6.110.0 tonight.
I guess my question is how can an SSID just drop off the client view if others on the same AP are fine?
How does the AP deal with multiple SSIDs and does it prioritise?
I have to add that I've never had this issue and I'm just using a company standard HP laptop with an Intel chipset.

Hello,
See my comments:
Also, the RSSI seems to fluctuate wildly.
A: This is often how a device hears the frames. Sometimes in high interference you can epxect this to jump around. I normally like to see if all the devices are doing this or just a select few. Sometimes poor clients jump around more than others.
I should add that we have disabled up to 11mbps data rates on the controller and we're running 7.6.100.0 currently, but plan to upgrade to 7.6.110.0 tonight.
A: I dont think turning off lower rates are bad unless your WiFi cant support the design. Good call get on the latest.
I guess my question is how can an SSID just drop off the client view if others on the same AP are fine?
A: Again, its a client missing frames like beacons.
How does the AP deal with multiple SSIDs and does it prioritise?
A: This SSIDs are virtualized. I blogged how this is done:
http://www.my80211.com/home/2011/5/2/wlc-how-cisco-virtualizes-the-base-radio-mac-address-on-the.html
I have to add that I've never had this issue and I'm just using a company standard HP laptop with an Intel chipset.
A: Again I think if you search you might see this is more around specific devices. I would do a packet capture and see what is going on. Recently had to troubleshoot an Android only to find out it was just bad wifi client. Always sending NULL frames and scanning and not passing traffic

I updated to lion and now don't have a minimize button in the new emails i am writing. Do i really have to save it as a draft to be able to have multiple emails in progress? Or am I missing something obvious?!

I updated to lion and now don't have a minimize button in the new emails i am writing. Do i really have to save it as a draft to be able to have multiple emails in progress? Or am I missing something obvious?!

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-and https://forums.adobe.com/thread/1572504
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

11xx able to handle multiple SSID's and encryption?

Similar Messages

Maybe you are looking for