12.0.1.26.Can't select or unselect Podcasts to Ipod

  Hi, I have been podcasting with ITunes for over 5 years now
and I use it EVERY day.  Most everything
was ok until I updated the 12.0.1.26. 
     Now to select a podcast to transfer to my IPod I have to
select the box UNDER the podcast I desire to listen to.  This all happens after I have downloaded the
podcast and it’s ready to send to my IPod. So this means I can’t select the
very last podcast on the list because clicking the box only shades it briefly
and the box remains unselected!
     Problem #2
After I listen to the podcast and want to (not delete it
from the list) but to unselect the podcast so I have room for something else
the podcast will not deselect.
     I have uninstalled and reinstalled 5 times.  I have completely reconfigured my I pod.  I have 3 IPods and I am having the same
problem with all 3.. Newest IPod 1.0.3 Microsoft Windows Version 6.1 Windows 7 Home Premium OP Just had PC completely serviced by Geek Squad
HELP

Hi, CanadaPostRock. 
Thank you for visiting Apple Support Communities. 
I understand that your iPod shuffle is not recognized by your MacBook Pro.  Make sure that you are using an Apple branded cable try simply restarting the iPod as well as the computer.  If the issue persists, take a look at the steps in the article below. 
iPod not appearing in iTunes
Cheers,
Jason H. 

Similar Messages

  • I am trying to play my ipod shuffle 1st gen in itunes but it will not play. My windows 7 computer recognizes the ipod and I can easily select the songs on my ipod playlist in itunes but cannot play them. Any solutions to the problem?

    I get the feeling some has asked a question "like" this but not exactly that question which makes it really hard for find answers fast to the above question. Therefore, I decided to ask it anyway. Hopefully someone has a good solution that will work.
    Background on the question:
    - I had to erase and reupload song on my ipod 1st gen to my new computer. Apparently the ipod could not be read by the iTunes in my new computer because the playlist cannot be opened in more than one iTunes or in another computer or something like that (this makes no sense). All this was to try and charge my ipod that does not seem to want to charge. It connects perfectly to the computer and I can see the initial blinking yellow lights on the back and front, but won't charge. I am currently working on this problem from other community discussion topics.

    Sync works the same way it always has, connect the device, select the content desired to sync and sync.
    All the media should be in iTunes already, iDevices are not and have never been backup devices.
    If this is a new computer, move the content from the old computer to the new computer.

  • Why can't I manually transfer podcasts onto ipod?

    I have an ipod classic, and I'm trying to move selected podcasts onto it by clicking and dragging.
    It looks like it should work, but nothing goes onto my ipod. If I add the podcasts to a playlist and then add the playlist, then I can get the podcasts to move onto the ipod, but does anyone know why I can't do it the normal way?
    I don't want to sync all my episodes as then I'll lose most of them because they're from another computer that died.

    This seems very similar (if not identical) to my issue:
    http://discussions.apple.com/thread.jspa?threadID=725691&tstart=0
    Has Apple removed the ability to manually select and delete individual Podcasts on your iPod via iTunes? And if so, why on earth would they do that? It can't be a "feature" can it?
    I don't want to have to delete Podcast episodes from my harddrive/iTunes library simply to delete them from my iPod; I maintain a large library of Podcasts, and I like to manually move them to the iPod when I feel like listening to them in the car or whatever, and deleting them later (from the iPod only, not from iTunes).
    I'm about ready to downgrade back to iTunes 6...

  • Can not select from data dictionary view from a procedure

    Hi,
    I wonder, which privilege is missing here:
    my schema has this roles and privs:
    GRANT CONNECT, RESOURCE TO cb ;
    GRANT CREATE SESSION TO cb ;
    GRANT SELECT_CATALOG_ROLE TO cb ;
    GRANT CREATE SYNONYM TO CB;
    GRANT CREATE VIEW TO CB;
    I create a procedure:
    create or replace procedure dd_test as
    begin
         dbms_output.enable(2000000);
         for r in (select table_name from sys.dba_tab_partitions     where owner = 'CB') loop
                   dbms_output.put_line(r.table_name);
         end loop;
    end;
    sho err
    4/38 PL/SQL: ORA-00942: table or view does not exist
    When I run the core statement form sql prompt, it works !
    so what privilege is missing here ???
    thanks for any hint, Lao De

    Hi,
    thanks for that reply, after doing that I can not select this DD-view from sql-prompt anymore (which I don't wonder ;-). Can you tell me, what idea you had behind that test ?
    I found another instance, where the procedure works and I will compare those privileges, but it's hard to sort out that complex structure of nested roles and sys_privs.
    How ever, I will update here, when I found the missing privilege.
    regards LaoDe

  • Can't select anything in design mode

    I am new on a large Flex project, and when I go into design mode on one of the mxml files, I can't select anything.  The other views work fine.  Is there a lock, or something?   Below is what it looks like (black mark just hides brand info).  Note that there is a red line near the bottom.  It is actually selectable, but it doesn't do anything.  If I go to Source mode and select a chunk of code, then back to design mode, it does show it as selected.
    This in Flex Builder 3, thanks.

    Have you tried using the outline view for selection?
    Jason San Jose
    Software Engineer, Flash Builder

  • Can not "select" partitioning snapshot ?

    I can create partitioning snapshot ( Oracle 8 ) , but I can
    issue SELECT statement with partition-extended object name
    Ex : Selet * from snapshot_name patition ( par_name )
    How to SELECT data from snapshot with partition-extended object
    name ?
    null

    I can create partitioning snapshot ( Oracle 8 ) , but I can
    issue SELECT statement with partition-extended object name
    Ex : Selet * from snapshot_name patition ( par_name )
    How to SELECT data from snapshot with partition-extended object
    name ?
    null

  • Can not select TV speakers when connected via HDMI

    I have a MBP fully updated connected to a Sony TV vis HDMI/miniport.  Up until today this configuration was working fine.  Suddenly, I can no longer select the HDMI speakers in my audio preferences.  They are recognized and appear on the list but when I select them it has no effect.  Before today, when the TV was connected the HDMI output would be automatically selected and I could not access the volume control from the menu bar, which is the way I prefer it. 
    I have restarted with no success in changing this behaviour.  If I open/close the lid, the sound goes to the proper settings for about 2s but then the HDMI speakers are de-selected and the built-in speakers are highlighted.  I can manually select the TV speakers but the setting has no effect.
    However, I *am* getting audio output through the TV but can not control volume from the mac or any app.  I slide the volume slider on the menu bar and the audio output does not change.  The sound is also playing from the laptop speakers which is highly annoying.

    and now there is no audio through the TV at all.  TV works fine with other inputs such as PS3.  Any help?

  • Can not select 'Show HD' in Finder Preferences

    Just performed Data Migration on a new iMac Intel late 2011 from a 2 year old iMac Intel.  For some reason, the Macintosh HD does not display on the desktop.  If I go to Finder Preferences I can not select Hard Disks.  The box is not selected, but If I try to click it, it will not stick.  How do I fix that.  Not much on the internet concering this peculiarity.

    OK, try a couple of things. First is to do some resets, the first I'd recommend doing is restarting the computer in  Safe Mode, this will clear some caches. It's possible one is corrupt. Next is to reset the SMC and PRAM, each of these should be done 2x to ensure they work. Finally if that doesn't do it open Disk Utility (Applications - Utilities - Disk Utility) and Repair Disk Permissions 2x.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Can not select an address from Contacts in Maverick

    I'm able to access my address book contacts from Mail. 
    But when Contacts window is open,  I can not select a contact (For, CC, Bcc Fields are in grey).
    Is there anyone with suggestions?
    Many thanks!

    Hello
    I am not selecting a group. I am just trying to select a contact, any contact.
    But when I click on contacts icon ...
    and the address book opens, nothing happens when clicking on a specific contact.
    Besides, the fields For (= Para), Cc and Bcc, are not active...
    Many thanks

  • Can not select from SAPTOOLS.DB6PMCF

    We use third-party tool to monitor our SAP systems. We receive an error
    Can not select from SAPTOOLS.DB6PMCF
    when we monitor DB2 database.
    Function DB6PMCF is registered in SAPSID schema. Can I register it also in SAPTOOLS schema? What is a correct procedure for this?

    Hi Milan,
    I think you have to issue the following command for the affected user.
    db2 "grant execute on function saptools.db6pmcf to <user>"
    regards, Javier Rocha

  • Can not select external input for sound

    can not select external input for sound

    Hey there RoosterMonkey,
    It sounds like you have Soundtrack Pro installed but you cannot select your external audio device as an input. I recommend the troubleshooting steps from the article named:
    Soundtrack Pro 3: Troubleshooting Basics
    http://support.apple.com/kb/ht3659
    Update to the latest software versions
    From the Apple () menu, choose Software Update and make sure that you have the most recent updates for your versions of Soundtrack Pro 3, QuickTime, Compressor, Pro Application Support, and other important system files. Installing the latest updates ensures that your software has the latest improvements and enhancements.
    Note: Be sure the application is in the Applications folder and is named Soundtrack Pro before running Software Update.
    Check compatibility and driver versions for third-party devices
    If you're using a third-party sound card, MIDI interface, storage system, control surface, or plug-in, check the support area on the manufacturer's website to be sure that you're using the latest version of the relevant driver or other software for your product. For information on troubleshooting possible issues with Audio Unit plug-ins, go to Soundtrack Pro 3: Troubleshooting Audio Unit plug-in issues.
    Try a different Multitrack Project or Audio File Project
    Sometimes project files can become damaged, causing unexpected behavior in Soundtrack Pro. To create a fresh project, choose File, then New and select Multitrack Project or Audio File. Test to see if the issue is resolved in the new project.
    Delete the User Preferences
    You can resolve many issues by restoring Soundtrack Pro to its original settings. This will not impact your project files. To reset your Soundtrack Pro user preference settings to their original state:
    Quit Soundtrack Pro if it is open.
    In the Finder, choose Go > Go to Folder from the menu bar.
    Type ~/Library/Preferences  in the "Go to the folder" field.
    Remove the "com.apple.soundtrackpro.plist" file from the Preferences folder.
    In the Finder, choose Go > Go to Folder from the menu.
    Type ~/Library/Application Support/Soundtrack Pro  in the "Go to the folder" field.
    Remove the "EffectsCache.plist" file from the Soundtrack Pro folder.
    In the Finder, choose Go > Go to Folder from the menu.
    Type ~/Library/Application Support/Soundtrack Pro/Layouts  in the "Go to folder" field.
    Remove the "Soundtrack Pro.saved.moduleLayout" file from the Layouts folder.
    In the Finder, choose Go > Go to Folder from the menu.
    Type ~/Library/Caches in the "Go to folder" field.
    Remove the "com.apple.audiounits.cache" from the Caches folder.
    Remove receipts and reinstall Soundtrack Pro 3 and Compressor
    Another approach you might consider is reinstalling Soundtrack Pro and Compressor. To do this effectively, you need to remove the applications and their receipts, then install Soundtrack Pro and use Software Update to install additional updates. Compressor gets installed automatically when you install Soundtrack Pro. You don't have to remove everything that was installed with Soundtrack Pro, so follow the steps below to completely reinstall a fresh copy of Soundtrack Pro. Note: Make sure that you have your installation discs handy before beginning.
    In Mac OS X v10.6 Snow Leopard or OS X Lion
    Open the Terminal application and enter the following commands one at a time and an administrator password when prompted. Note: The commands are case sensitive.
    sudo pkgutil --forget com.apple.pkg.Compressor
    sudo pkgutil --forget com.apple.pkg.Qmaster
    sudo pkgutil --forget com.apple.pkg.VideoOutSupport
    sudo pkgutil --forget com.apple.pkg.PSTSharedA
    sudo pkgutil --forget com.apple.pkg.AppleHDVCodec
    sudo pkgutil --forget com.apple.pkg.AppleIntermediateCodec
    sudo pkgutil --forget com.apple.pkg.DSPPublishing
    sudo pkgutil --forget com.apple.pkg.SoundtrackPro
    sudo pkgutil --forget com.apple.pkg.Uncompressed422
    Then, reinstall Soundtrack Pro and Compressor using the following steps:
    Open the Applications folder. Drag the Soundtrack Pro and Compressor applications to the Trash.
    Insert your Logic Studio or Final Cut Studio installation disc and install Soundtrack Pro.
    When finished installing, choose the Apple () menu, then Software Update to update your software to the latest version.
    Open Soundtrack Pro to verify that the issue has been resolved.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • ADF 11g can not select and copy data from cell of readonly table in IE

    hi,
    In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
    is it a bug?
    Edited by: kent2066 on 2009-5-18 上午8:46

    Hi Timo,
    Sorry forgot to mention versions.
    We are using 11.1.1.7 and IE 9.
    I tried in Google but could not get the solution.
    Kindly let me know solution for this.
    PavanKumar

  • Can I Select from table skipping extents linked with lost datafiles?

    Hi~,
    I need your help to recover my database.
    I'm using oracle 9.2.0.8 at Fedora 3 with no-archive mode.
    and I don't have any backup.
    Last night, I experenced hard disk failure.
    I tried OS-level recovery, but I lost some datafiles of tablespace.
    anyway, I wanted to recover my database without data of lost datafiles.
    so, I issued "alter database datafile offline drop" and
    start oracle instance.
    But, datafiles were not removed from dba_data_files view and
    extents linked with lost datafiles were not removed from dba_extents view!
    Selecting query of some table containing extents linked with lost data files,
    I got "ORA-00376: file xxx cannot be read at this time" message.
    So, my question is that..
    HOW CAN I SELECT FROM THAT TABLE WITHOUT SCANNING EXTENTS LINKED WITH LOST DATA FILES?
    Thanks.

    Hi,
    Without being in archivelog and without backup, one can't do any sort of recovery. That's why backups and archivelog are so so important.
    The offline data file command never does actually drop the datafile. It merely indicates to the control file that now the said tablespace will also be dropped. This won't update any view that the files are not supposed to be used or shown to you anymore.
    This is what documentation says about the recovery of the database in the NoARch mode,
    http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/osrecov.htm#i1007937
    You do need a backup in order to get those tables being read. Oracle doesn't have any feature which can offline/skip the missing extents for you and let you read the data without them.
    HTH
    Aman....

  • Running Multiple SQL in a Single Worksheet: Can I Selectively Run a Single SQL and Append Output?

    In any release of SD, if I have a single worksheet containing 10 sqls. Is it possible to place the cursor on any of the sql and run only that sql, yet, append its output to existing output window. I can then select another sql and execute it and keep appending output. In other words, do not clear existing output or start a new output tab.
    As it exists today (in any release), I can either 'run script' which does append, but it executes all the sql (non-selective). Alternately, I can 'run statement' to selectively run a single sql, but it will clear the output window (or if pinned), start a new one. None of this is what I want.
    Thank you.

    Select the query you want to run. Execute it via F5. Then highlight the next query and repeat.
    The output will append to the Script Output panel.
    There's no way to get 2 queries to share a grid, unless you were to run them as a single query a la UNION.

  • New owner here.  How can I select specific pages of a document found on line and print just those pages.  What I see is the ability to select only 1 page at a time and print that one selected page only.   Thanks much.

    New owner here.  I see that in printing I can select one page and print same.  How do I select numerous pages from a document and print only those selected pages? I would not think that I can only select one page at a time.  Thanks much

    Just change the range as illustrated below.  If you don't see that, click the Show Details button.

Maybe you are looking for