12.1.1 POST-upgrade ---verify concurrent process
I have upgraded 11.5.10.to 12.1.1 successfully when I was running post upgrade
Oracle® Applications
Upgrade Guide
Release 11i to 12.1.1
Part No. E14010-01
chapter 4
Step 1: Verify completion of concurrent programs (recommended)
The upgrade process creates numerous concurrent program requests. Once you bring
up the application tier, these programs run automatically to complete tasks such as data
cleanup and upgrades to historical data, among others. You can run these programs in
the background, while your system is up and running and users are active, unless
otherwise instructed in the product-specific sections of this book.
Before you continue, be sure all the concurrent programs generated by the upgrade
have run successfully. In the Required Post Upgrade Jobs section of E-Business Suite
Release 12 Upgrade Sizing and Best Practices (Doc ID: 399362.1), you will find a list of the
distinct concurrent programs included in the upgrade process. The Best Practices
section includes a recommendation on how to isolate these programs (and all their
executions) into a separate concurrent manager queue, which you can use for
processing.
post upgrade concurrent request were around 989 but
by mistake I stopped the concurrent manager and I ran cmclean.sql --:(
then after some time I shut abort the database
please tell me what should I do now
what impact will cmclean and shut abort will have ?
how do i know which request are clean by cmclean
and how can I ran them again??
Immediate reply is appreciated
AppsmastI
SHaring Is CArinG
post upgrade concurrent request were around 989 but
by mistake I stopped the concurrent manager and I ran cmclean.sql --:(
then after some time I shut abort the database
please tell me what should I do now In the Required Post Upgrade Jobs section of E-Business Suite Release 12 Upgrade Sizing and Best Practices (Doc ID: 399362.1), you will find a list of the distinct concurrent programs included in the upgrade process.
what impact will cmclean and shut abort will have ?cmclean.sql script should not have any impact on the concurrent programs, however shutdown abort will do the following http://docs.oracle.com/cd/E11882_01/server.112/e10595/start003.htm#i1006611
how do i know which request are clean by cmclean In the same session you will find the list of table that are updated by cmclean.sql script along with the request ids.
and how can I ran them again??See the doc referenced above.
Thanks,
Hussein
Similar Messages
-
ASU-process POST Upgrade Step on SQL database
Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List Severity SAP R/3 release frm SAP R/3 release to
IS-OIL Application Test 600 Optional
KP06xx: Termination SYNTAX_ERROR Obligatory 470 500
CGPL: Entries are blank after upgrade Obligatory
Error handling of task group execution Optional
Mobile device cannot confirm TO after release upgrade Obligatory 470 600
Mobile device doesn't find transfer orders after upgrade Obligatory 470 600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Convert customizing for warehouse funds ctr scenarios Optional
Various problems classification commitment items (class type Obligatory
Unauthorized error messages udring fiscal year change/reassi Obligatory
RFFMUDX1 migrates incomplete budgeting tables Obligatory
Non-7bit-ASCII character used for BCS key figures Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Migration to ERP 6.0 (EA-PS 6.00) Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00) Obligatory
Missing initialization of new fields in table ANLZ Obligatory 46C 470
Activating VMC for the Internet Pricing and Configurator Obligatory
Customer specific BSEG-fields not transferred Optional
Conversion of report headers in drilldown-reporting Optional 600
IBase: Upgrade to Release 4.6C and higher Optional 46C 600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher Optional 46C 470
Conversion of CO-Total-Tables Obligatory 46C 500
Conversion of CO-line-item table COEP Obligatory 46C 600
New General Ledger, problems in CO-documents Obligatory 500
No receivers found in allocations Obligatory 46C 470
Conversion Of New Process Parameter Long Texts For Search Optional 110 600
Migration of process parameters in recipe management Optional 110 600
FAQ new depreciation calculation Optional 600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT Obligatory 100 500
Reloading Table T512W Optional
Converting Short Texts Obligatory
Migrating Data Optional 4.7
Activating SAP ECC Extensions Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
VinayHi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade. SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit -
Upgrade step ASU-process post upgrade step
Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List Severity SAP R/3 release frm SAP R/3 release to
IS-OIL Application Test 600 Optional
KP06xx: Termination SYNTAX_ERROR Obligatory 470 500
CGPL: Entries are blank after upgrade Obligatory
Error handling of task group execution Optional
Mobile device cannot confirm TO after release upgrade Obligatory 470 600
Mobile device doesn't find transfer orders after upgrade Obligatory 470 600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Convert customizing for warehouse funds ctr scenarios Optional
Various problems classification commitment items (class type Obligatory
Unauthorized error messages udring fiscal year change/reassi Obligatory
RFFMUDX1 migrates incomplete budgeting tables Obligatory
Non-7bit-ASCII character used for BCS key figures Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Migration to ERP 6.0 (EA-PS 6.00) Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00) Obligatory
Missing initialization of new fields in table ANLZ Obligatory 46C 470
Activating VMC for the Internet Pricing and Configurator Obligatory
Customer specific BSEG-fields not transferred Optional
Conversion of report headers in drilldown-reporting Optional 600
IBase: Upgrade to Release 4.6C and higher Optional 46C 600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher Optional 46C 470
Conversion of CO-Total-Tables Obligatory 46C 500
Conversion of CO-line-item table COEP Obligatory 46C 600
New General Ledger, problems in CO-documents Obligatory 500
No receivers found in allocations Obligatory 46C 470
Conversion Of New Process Parameter Long Texts For Search Optional 110 600
Migration of process parameters in recipe management Optional 110 600
FAQ new depreciation calculation Optional 600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT Obligatory 100 500
Reloading Table T512W Optional
Converting Short Texts Obligatory
Migrating Data Optional 4.7
Activating SAP ECC Extensions Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
Vinay
Edited by: Vinay Paul on Sep 11, 2009 10:11 PMHi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade. SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit -
SLA Pre- upgrade programs and process and SLA Post upgrade
Hi Guys
Can anybody please let me know what are the SLA Pre- upgrade programs and process we have to run and SLA Post upgrade process and programs.
Thanks
AjeeshPl post details of OS and EBS versions. Pl see if MOS Doc 604893.1 (R12: FAQ for the SLA Upgrade: SLA Pre-Upgrade, Post-Upgrade, and Hot Patch) can help
HTH
Srini -
Concurrent Process to generate journals from previous month posted journals
Need to create an Oracle concurrent process that allows to generate journals from the previous month posted journals. Parameters would be Journal Name and Period. We wanted to copy a posted journal or save it as a different name.
Need to create an Oracle concurrent process that allows to generate journals from the previous month posted journals. Parameters would be Journal Name and Period. We wanted to copy a posted journal or save it as a different name.
-
COncurrent process fails with warning for OPP
Concurrent process generates xml output (version 5.6.2) .
When it tries to publish it , the log suggests checking out the OPP log.
The OPP log has a series of java entries for the request, including one of the type
Caused by: oracle.xdo.parser.v2.XPathException: Expected 'QNAME' instead of ''.
header of the OPP log says
Resolution History
18-OCT-06 20:36:05 GMT
Can you easily recover from, bypass or work around the problem? = NO
Does your system or application continue normally after the problem occurs? =
YES
Are the standard features of the system or application still available; is the
loss of service minor? = YES
### Informational Only:Warning Presented to Customer ###
You chose 'Other technical issues with this product' from the Type of Problem
list. This is a generic Service Request form which will require additional time
to be routed appropriately. You may be able to expedite the resolution of your
Service Request by doing the following: 1. Use your browser’s back button to
return to the Create a SR – Brief Description page. 2. Select an option from
the Type of Problem list that more closely describes the problem.
### Requested files:ACT(Note 183274.1),RDA (Note 175853.1). Files to be loaded.
None
### Detailed Problem Statement ###
Concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.
Attached are OPP Manager log file, Screen shot of 'Preview' output jjst before
submitting request. Also log file of failed concurrent request which contains
standard error " See OPP Service log file for more".
### Steps to Reproduce Problem ###
Registered a concurrent process with XML template , and running the process
from Receivables Manager responsibility.
Ran concurrent process for 1) Standard RAXINV report , with output method as
'XML'. 2) Customised RAXINV report, with output method as 'XML'
### Instance Name(s) and Type of System(s) Where Error Occurs ###
Lunix, 11.5.10 on 10g
### Recent Changes to this Environment ###
None
### Workarounds Used ###
None
### How is this Issue Impacting Your Business ###
Business is readying for CRP3, so would like to have reports ready by then.
Contact me via : MetaLink
18-OCT-06 20:48:07 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\XML_Pub1.bmp
18-OCT-06 20:49:14 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\XMLPublisher_java.t
xt
18-OCT-06 21:17:26 GMT
Hi Bashobi,
Thank you for using MetaLink. We are currently reviewing/researching the situation and will update the SR as soon as we have relevant information
Best Regards,
Bill
Oracle Support Services
STATUS
=======
@WIP -- Work In Progress
18-OCT-06 21:18:04 GMT
Email Update button has been pressed: Sending email to [email protected].
18-OCT-06 21:21:45 GMT
ISSUE CLARIFICATION
====================
On 11.5.10.2 in Production:
Find concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.
EXPECTED BEHAVIOR
Expect the processes run successfully
STEPS
The issue can be reproduced at will with the following steps:
1. Registered a concurrent process with XML template .
2. Run the process from Receivables Manager responsibility.
3. Ran concurrent process for
1) Standard RAXINV report , with output method as 'XML'
2) Customised RAXINV report, with output method as 'XML'
BUSINESS IMPACT
The issue has the following business impact:
Business is readying for CRP3, so would like to have reports ready by then.
ACTION PLAN
============
Hi Bashobi,
1. Can you reproduce the issue from sysadmin responsibility with Active users report? if yes
please upload OPP log file after reproduce it and upload the request log file.
Thanks.
18-OCT-06 23:09:02 GMT
New info : [email protected] : Did the same as suggested, Request
completes successfully.
But what is the relation between Active Users report and a report sent via XML
Publisher?
19-OCT-06 15:54:26 GMT
ACTION PLAN
============
Hi Bashobi,
1. When you reproduce the issue from sysadmin responsibility with Active users report change the format out put to XML,
Save your change:
2. Upload OPP manager log file and upload the request log file.
Thanks,
Bill.
19-OCT-06 15:54:33 GMT
Email Update button has been pressed: Sending email to [email protected].
19-OCT-06 16:42:23 GMT
New info : [email protected] : Bill,
No, I could not reproduce the problem with Active Users program.
Attaching OPP manager log in the next update. Bashobi
19-OCT-06 17:05:07 GMT
New info : [email protected] : Bill, Attaching internal log and manager
log
Bashobi
19-OCT-06 17:06:08 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\OPP_internal_log.tx
t
19-OCT-06 17:07:10 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\OPP_manager_log.txt
19-OCT-06 18:14:32 GMT
UPDATE
=======
Hi Bashobi,
Thank you for providing the requested information.
Best Regards,
Bill
STATUS
=======
@WIP -- Work In Progress
19-OCT-06 18:14:36 GMT
Email Update button has been pressed: Sending email to [email protected].
19-OCT-06 18:59:25 GMT
DATA COLLECTED
===============
SCREEN SHOTS
XML_Pub1.bmp:
Error:
Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob...........
LOG FILE
1. XMLPublisher_java.txt:
[10/18/06 11:16:57 AM] [5670:RT277479] Completed post-processing actions for request 277479.
[10/18/06 11:29:06 AM] [OPPServiceThread1] Post-processing request 277488.
[10/18/06 11:29:06 AM] [5670:RT277488] Executing post-processing actions for request 2
77488.
[10/18/06 11:29:06 AM] [5670:RT277488] Starting XML Publisher post-processing action.
[10/18/06 11:29:06 AM] [5670:RT277488]
Template code: XXBE_TEST_INV
Template app: AR
Language: en
Territory: US
Output type: null
[10/18/06 11:29:07 AM] [UNEXPECTED] [5670:RT277488] java.lang.reflect.InvocationTarg
etException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
10/18/06 11:29:07 AM] [5670:RT277488] Completed post-processing actions for reque
st 277488.
2. OPP_manager_log.txt:
[10/19/06 5:22:36 AM] [main] Starting GSF service with concurrent process id = 5688.
[10/19/06 5:22:36 AM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[10/19/06 5:22:37 AM] [Thread-12] Service thread starting up.
[10/19/06 5:22:37 AM] [Thread-13] Service thread starting up.
ISSUE VERIFICATION
=================
Issue veryfied by the screen shots: XML_Pub1.bmp which shows:
Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob...........
ACTION PLAN
============
Hi Bashobi,
1. Since you can not reproduce the issue from sysadmin responsibility can we say the issue specific to Receivables Manager
responsibility<INV xml report>?
2. You said before: "Concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.":
Is the above mean :
-The xml publisher report completed but you can not view the whole XML file
-Or the xml publisher report error out with "Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob.."
Thanks.
19-OCT-06 18:59:32 GMT
Email Update button has been pressed: Sending email to [email protected].
20-OCT-06 21:36:13 GMT
Email Update button has been pressed: Sending email to [email protected].
24-OCT-06 21:50:06 GMT
New info : [email protected] : Hi,
We are in the process of upgrading XML Publisher at the moment. I would like to
wait a day or two to test the report with the upgrade.
Thanks,Bashobi
26-OCT-06 20:15:07 GMT
New info : [email protected] : Hi,
Our DBA has applied the 5.6.2 patch on our dev instance. My concurrent process
runs to a warning.
The warnings in the OPP manager log file say
Template code: BE_RAXINV
Template app: XXBE
Language: en
Territory: US
Output type: PDF
[10/26/06 12:50:13 PM] [UNEXPECTED] [5849:RT281617]
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any idea?Hi All,
I have ran into the same issue.
"The Output Post-processor is running but has not picked up this request.
Any ideas.
Thanks
Ravi -
Recreate post-upgrade deferred data migration job?
Hello everyone,
after setting up our new OMS 12c (2-system-approach, i.e. both the old one and new one are running at the moment), I switched a number of test machines to the new OMS12 and ran the accrued and deferred data migration jobs.
The deferred data migration job "metrics" failed, and - unfortunately not checking the documentation first - I killed the failed job because I hoped this would enable me to restart it.
Oracle Documentation:
"To rerun a failed job, click the status icon to reach the Job Run page. On the Job Run page, click Edit. On the Edit <JobName> Job page, click Submit to rerun the job."
Now I can neither rerun the job nor does the system seem to be capable of recreating it - is there a possiblity to get that job back in there? Or maybe run it at least manually? The collected historical metric data was the one reason we decided to do the 2-system-approach in the first place, and having to go through the whole process of setting up OMS 12 another time seems excessive.
Every help much appreciated!
Edited by: user13085691 on Feb 13, 2012 2:50 AMRun following as SYSMAN to update the status manually as success in case you have run the job manually and verified as successful.
Begin
gc_post_ugc.setPostUgcRepoJob(p_comp_name=>POST_UGC.G_METRIC_COMP,
p_job_name=>,POST_UGC.METRIC_REPOS_JOB
p_status=>POST_UGC.G_PASSED_STATUS
End;
Please use following process next time, in case you killed the jobs by mistake; following would update the status correctly in Post Upgrade Console.
ECM Config DDMP job
If the job is in failed state in Post upgrade Console page, Run the following sql to check if the db session is still running behind.
SELECT Count(1) FROM v$session WHERE MODULE = 'OracleEnterpriseManager.ConfigDataMigration';
If the value returned is greater than zero, then db session for the job is still running, Else the session is not running.
If db session for this job is not running, Follow the steps below to restart the job
1.delete the job from EM job system
mgmt_jobs.delete_job('POST_UGC.CONFIG_REPOS_JOB','SYSMAN');
2. update the status to null
update EM_POST_UGC_REPO_JOBS set status=NULL WHERE comp_name = 'CONFIG';
3. start the job from DDMP tab in post upgrade console page.
Metric DDM Job
If the job is in failed state in Post upgrade Console page, Run the following sql to check if the db session is still running behind.
SELECT Count(1) FROM v$session WHERE MODULE = 'OracleEnterpriseManager.MetricDataMigration';
If the value returned is greater than zero, then job session is running, Else the session is not running.
If db session for this job is not running, Follow the steps below to restart the job
1.delete the job from EM job system
mgmt_jobs.delete_job('POST_UGC.METRIC_REPOS_JOB','SYSMAN');
2. update the status to null
update EM_POST_UGC_REPO_JOBS set status=NULL WHERE comp_name = 'METRIC';
3. start the job from post upgrade console page.
-------------------------- -
HI Friends,
I have upgraded my EP from 6.0 to 7.0 successful with all component. ALos i am getting login screen. SO what are post upgrade step for EP.
Thanks,
Regards,
SachinHI ,
System restart
run the SICK verify the installation check
Check developer traces on the operating system. Log on to
Check the installed license and profile configuration (RZ10 and PFCG)
confirm the operation modes
Perform a client copy
Check the status of the SAP Web AS Java and the user SAPJSF
Check the rdisp/j2ee_start profile parameter
Check the current state of SAP Web AS Java using transaction SMICM
SAP Load Generator
Start SAP Load Generator (SGEN)
Regards, -
Change Log issues - Post Upgrade
Hi Experts,
We are in the process of Upgrading BW from 3.X to BI 7. As part of this we copied our existing Production system into the sand box and basis did the technical upgrade on the same (Sand Box). Later we ran some post upgrade Jobs as part of the SAP defined Upgrade Process.
1) But after the upgrade i can notice that most of the ODS objects, doesn't have 'Change Log' table in the 'Information (Log/Status)' screen.
2) Even when i try to view the change log content in Manage screen, it gives me a pop up to enter the change log table, instead of directly taking me to the selection screen.
3) When i try to activate a request, even that fails with an SQL error 'SAPSQL_EMPTY_TABNAME'.
Is there any process that has to be run to link the Older version change log tables to the corresponding ODSs after Upgrade?
Has anyone come accross similar issues? If yes, how was it solved? All suggestions are invited.
Thanks and Regards,
JayHI JayaPrasad,
Chek the note : 1059171 which is related to Change log,
I too faced this issue when upgraded to Bi7.0 on SP12, but as soon as SP13 is installed the issue is solved, so I suggest to go for SP 13 for upgrading to Bi7.0.
Regards,
Srinivas -
Solve oracle multimedia post upgrade errors
Hello,
I performed and out of place upgrade from oracle 10.2.0.4 to 11.2.0.4.
when I run the postupgrade script i have issues on oracle multimedia that i cannot solve.. it is about shared memory. I followed all the recommendations suggested on the pre-upgrade script.
SQL> @/oracle/product/11.2.0.4/dbhome_1/rdbms/admin/utlu112s.sql
Oracle Database 11.2 Post-Upgrade Status Tool 10-03-2014 15:06:57
Component Current Version Elapsed Time
Name Status Number HH:MM:SS
Oracle Server
. VALID 11.2.0.4.0 00:14:07
JServer JAVA Virtual Machine
. VALID 11.2.0.4.0 00:11:08
Oracle Workspace Manager
. VALID 11.2.0.4.0 00:00:48
Oracle Enterprise Manager
. VALID 11.2.0.4.0 00:09:58
Oracle XDK
. VALID 11.2.0.4.0 00:02:48
Oracle Text
. VALID 11.2.0.4.0 00:00:59
Oracle XML Database
. VALID 11.2.0.4.0 00:05:45
Oracle Database Java Packages
. VALID 11.2.0.4.0 00:00:20
Oracle Multimedia
. ORA-00604: error occurred at recursive SQL level 1 ORA-04031: unable to
allocate 32 bytes of shared memory ("shared pool","select col#, grantee#,
privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at
"SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. ORA-04031: unable to allocate 32 bytes of shared memory ("shared
pool","select col#, grantee#,
privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at
"SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. col#, grantee#, privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. ORA-06512: at "SYS.DBMS_JAVA", line 655 ORA-06512: at line 1
. ORA-06512: at line 1
. ORA-00604: error occurred at recursive SQL level 1 ORA-04031: unable to
allocate 136 bytes of shared memory ("shared pool","select
i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds: qksmmGetWorkArea")
ORA-06512:
at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. ORA-04031: unable to allocate 136 bytes of shared memory ("shared
pool","select i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds:
qksmmGetWorkArea")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds: qksmmGetWorkArea")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. ORA-06512: at "SYS.DBMS_JAVA", line 655 ORA-06512: at line 1
. ORA-06512: at line 1
. ORA-04045: errors during recompilation/revalidation of
ORDSYS./f87ac59f_DicomEngine
ORA-04031: unable to allocate 32 bytes of shared
memory ("shared pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
. ORDSYS./f87ac59f_DicomEngine ORA-04031: unable to allocate 32 bytes of
shared memory ("shared pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
. ORA-04031: unable to allocate 32 bytes of shared memory ("shared
pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
. JAVA CLASS "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 276 ORA-06512: at line 1
. ORA-06512: at line 1
. ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 14805
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 14805
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 14805
. ORA-06512: at line 14805
. ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 67
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 67
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 67
. INVALID 11.2.0.4.0 00:55:05
Spatial
. OPTION OFF 10.2.0.4.0 00:00:00
Oracle Expression Filter
. VALID 11.2.0.4.0 00:00:16
Oracle Rules Manager
. VALID 11.2.0.4.0 00:00:14
Final Actions
. 00:01:34
Total Upgrade Time: 01:43:11
PL/SQL procedure successfully completed.
thank you
Mario.I explicity set up the sga_target to 668MB as suggested by the pre-upgrade script.
see the output of preugrade tool:
SQL> @/oracle/utlu112i.sql
Oracle Database 11.2 Pre-Upgrade Information Tool 10-02-2014 17:24:25
Script Version: 11.2.0.4.0 Build: 001
Database:
--> name: FUELPLUS
--> version: 10.2.0.4.0
--> compatible: 10.2.0.3.0
--> blocksize: 8192
--> platform: Solaris Operating System (x86-64)
--> timezone file: V4
Tablespaces: [make adjustments in the current environment]
--> SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 1071 MB
--> UNDOTBS1 tablespace is adequate for the upgrade.
.... minimum required size: 400 MB
--> SYSAUX tablespace is adequate for the upgrade.
.... minimum required size: 804 MB
--> TEMP tablespace is adequate for the upgrade.
.... minimum required size: 60 MB
Flashback: OFF
Update Parameters: [Update Oracle Database 11.2 init.ora or spfile]
Note: Pre-upgrade tool was run on a lower version 64-bit database.
--> If Target Oracle is 32-Bit, refer here for Update Parameters:
WARNING: --> "sga_target" needs to be increased to at least 484 MB
--> If Target Oracle is 64-Bit, refer here for Update Parameters:
WARNING: --> "sga_target" needs to be increased to at least 668 MB
Renamed Parameters: [Update Oracle Database 11.2 init.ora or spfile]
-- No renamed parameters found. No changes are required.
Obsolete/Deprecated Parameters: [Update Oracle Database 11.2 init.ora or spfile]
--> cursor_space_for_time 11.1 DEPRECATED
--> background_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
--> user_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
--> cursor_space_for_time 11.2 DEPRECATED
Components: [The following database components will be upgraded or installed]
--> Oracle Catalog Views [upgrade] VALID
--> Oracle Packages and Types [upgrade] VALID
--> JServer JAVA Virtual Machine [upgrade] VALID
--> Oracle XDK for Java [upgrade] VALID
--> Oracle Workspace Manager [upgrade] VALID
--> EM Repository [upgrade] VALID
--> Oracle Text [upgrade] VALID
--> Oracle XML Database [upgrade] VALID
--> Oracle Java Packages [upgrade] VALID
--> Oracle interMedia [upgrade] VALID
--> Spatial [upgrade] VALID
--> Data Mining [upgrade] VALID
--> Expression Filter [upgrade] VALID
--> Rule Manager [upgrade] VALID
Miscellaneous Warnings
WARNING: --> Database is using a timezone file older than version 14.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 10.2.0.4.0 database timezone version
.... to the latest version which comes with the new release.
WARNING: --> Database contains INVALID objects prior to upgrade.
.... The list of invalid SYS/SYSTEM objects was written to
.... registry$sys_inv_objs.
.... The list of non-SYS/SYSTEM objects was written to
.... registry$nonsys_inv_objs.
.... Use utluiobj.sql after the upgrade to identify any new invalid
.... objects due to the upgrade.
.... USER PUBLIC has 1 INVALID objects.
WARNING: --> EM Database Control Repository exists in the database.
.... Direct downgrade of EM Database Control is not supported. Refer to the
.... Upgrade Guide for instructions to save the EM data prior to upgrade.
WARNING: --> Your recycle bin is turned on and currently contains no objects.
.... Because it is REQUIRED that the recycle bin be empty prior to upgrading
.... and your recycle bin is turned on, you may need to execute the command:
PURGE DBA_RECYCLEBIN
.... prior to executing your upgrade to confirm the recycle bin is empty.
WARNING: --> JOB_QUEUE_PROCESS value must be updated
.... Your current setting of "10" is too low.
.... Starting with Oracle Database 11g Release 2 (11.2), setting
.... JOB_QUEUE_PROCESSES to 0 causes both DBMS_SCHEDULER and
.... DBMS_JOB jobs to not run. Previously, setting JOB_QUEUE_PROCESSES
.... to 0 caused DBMS_JOB jobs to not run, but DBMS_SCHEDULER jobs were
.... unaffected and would still run. This parameter must be updated to
.... a value greater than 48 (default value is 1000) prior to upgrade.
.... Not doing so will affect the running of utlrp.sql after the upgrade
Recommendations
Oracle recommends gathering dictionary statistics prior to
upgrading the database.
To gather dictionary statistics execute the following command
while connected as SYSDBA:
EXECUTE dbms_stats.gather_dictionary_stats;
Oracle recommends reviewing any defined events prior to upgrading.
To view existing non-default events execute the following commands
while connected AS SYSDBA:
Events:
SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
WHERE UPPER(name) ='EVENT' AND isdefault='FALSE'
Trace Events:
SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2
WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
Changes will need to be made in the init.ora or spfile.
SQL> SPOOL OFF
here are the last 100 lines of upgrade.log
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
. JAVA CLASS "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 276 ORA-06512: at line 1
. ORA-06512: at line 1
. ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 14805
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 14805
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 14805
. ORA-06512: at line 14805
. ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 67
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 67
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 67
. INVALID 11.2.0.4.0 00:55:05
Spatial
. OPTION OFF 10.2.0.4.0 00:00:00
Oracle Expression Filter
. VALID 11.2.0.4.0 00:00:16
Oracle Rules Manager
. VALID 11.2.0.4.0 00:00:14
Final Actions
. 00:01:34
Total Upgrade Time: 01:43:11
PL/SQL procedure successfully completed.
SQL>
SQL> SET SERVEROUTPUT OFF
SQL> SET VERIFY ON
SQL> commit;
Commit complete.
SQL>
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL>
SQL>
SQL>
SQL> DOC
DOC>#######################################################################
DOC>#######################################################################
DOC>
DOC> The above sql script is the final step of the upgrade. Please
DOC> review any errors in the spool log file. If there are any errors in
DOC> the spool file, consult the Oracle Database Upgrade Guide for
DOC> troubleshooting recommendations.
DOC>
DOC> Next restart for normal operation, and then run utlrp.sql to
DOC> recompile any invalid application objects.
DOC>
DOC> If the source database had an older time zone version prior to
DOC> upgrade, then please run the DBMS_DST package. DBMS_DST will upgrade
DOC> TIMESTAMP WITH TIME ZONE data to use the latest time zone file shipped
DOC> with Oracle.
DOC>
DOC>#######################################################################
DOC>#######################################################################
DOC>#
SQL>
SQL> Rem Set errorlogging off
SQL> SET ERRORLOGGING OFF;
SQL>
SQL> REM END OF CATUPGRD.SQL
SQL>
SQL> REM bug 12337546 - Exit current sqlplus session at end of catupgrd.sql.
SQL> REM This forces user to start a new sqlplus session in order
SQL> REM to connect to the upgraded db.
SQL> exit -
BW upgrade - pre and post upgrade reports
Hi All
Quick question please.
We plan to upgrade our BW ABAP system from NW 731 SPS7 to NW 740 SPS6.
I read the ASU toolbox note 1000009 and can see that there is no file for our scenario i..e from 73X to 740 so note 1734333 is the way to go here when prompted for ASU toolbox run. However within the note 1734333, it states "This note requires that all pre-requisites for the BW-related system copy automation are met according to note 1707321". When i read 1707321 it talks about installation procedure for PCA which is part of LVM, a licensed software. We don't have this license. Hence I am wondering if note 1707321 is applicable for us at all or is it that this note would bring about changes in the system and sets up a staging area upon which the Z report from the other note(1734333) builds and then creates task list for pre and post upgrade. I am certain that we will have to implement Z report from note 1734333 however the reference to note 1707321 has created some confusion.
Also once we implement the Z report from 1734333, the note says, the report needs not be transferred but the objects generated need to be. Would the author here referring to reports - SAP_BW_BEFORE UPGRADE and SAP_BW_AFTER UPGRADE and having them recorded into a transport. Any thoughts here please. If the author is indeed referring to these reports only, how do we know this will show up in quality systems via STC01 as input options.
Regards
KalyanI re-read the note again, It says, If task manager content notes(1707321) are not applied, we will not see reports for stopping RDA Daemons and Process chains i...e report RS_SYSTEM_SHUTDOWN. However we are on NW 731 SP7 so we already have this report. This means we can go ahead with implementing the Z report from 1734333 and forget about the other note. Have I comprehended it correctly
Regards
Kalyan -
Output post processor unable to process XML report
Hi,
In production environment output post processor unable to process large financial reports. Below is error in request log file
Error 1: ompleted post-processing actions for request 1046445.
Exception in thread "OPPAQMON:36846" java.lang.OutOfMemoryError: Java heap space
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:146)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.waitForMessage(OPPAQMonitor.java:429)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.run(OPPAQMonitor.java:114)
at java.lang.Thread.run(Thread.java:619)
Error 2: Beginning post-processing of request 1046926 on node FORTISERPAPP1 at 21-FEB-2012 15:32:39.
Post-processing of request 1046926 failed at 21-FEB-2012 15:42:39 with the error message:
The Output Post-processor is running but has not picked up this request.
No further attempts will be made to post-process this request, and the request will be marked
with Warning status.
I have done changes suggested in step 2 and 3 of metalink note id 737311.1.
Please help to fine tune the opp so that I can complete financial reports.
Regards,
RajI have increase the java heap size for OPP to 2 gbHave you bounced the OPP?
Please see these docs.
Output Post Processor (OPP) Log Contains Error "java.lang.OutOfMemoryError" [ID 1266368.1]
Output Post Processor (OPP) Log Contains Error "java.lang.OutOfMemoryError: Java heap space" [ID 1268217.1]
XML Publisher Data Template Request XDODTEXE Fails with Java.Lang.OutOfMemoryError [ID 390968.1]
How to Configure the Account Analysis Report in Release 12 for Large Reports [ID 737311.1]
Out Of Memory Error When Running XML Publisher Template Re-Generator Concurrent Program [ID 788935.1]
Previewing PDF Generates 'java.lang.OutOfMemoryError: java heap space' Error [ID 415995.1]
Large Reports are Not Produced When Using BI Publisher Scheduler [ID 1088838.1]
Thanks,
Hussein -
Hi All,
I am testing out an upgrade from Siebel 8.0 (Horizontal) to Siebel 8.0 (Vertical) version.
Post upgrade after GUI Fixes, i did a full compile of siebel_sia.srf!
But, after i start my Siebel Services & try to access the Sales or High Tech Manufacturing Application, it doesnt come up.
The log file for both says:
"siebsrvr\log\SSEObjMgr_enu_0025_26214410.log 8.0 SIA [20405] ENU
ObjMgrSRFLog Error 1 00000006486b09f4:0 2008-07-02 13:33:39 (cdf.cpp (668)) SBL-DAT-00142: Could not open repository file 'd:\sia80\siebsrvr\objects\enu\siebel_sia.srf'.
File does not exist or may be in use by another process.
ObjMgrCTLog Error 1 00000006486b09f4:0 2008-07-02 13:33:39 (ctxtmgr.cpp (4492)) SBL-SVC-00208: Please login first."
Any idea why this is happening? The SRF file exists on the correct location & i dont see any other application accessing the same.
Regards,
ShalabhsnehaDouble-check with Siebel Tools that is the same file.
Check that the new Siebel application is shut down properly and has no "dangling" processes before restart. -
After starting Apps. and going to the apllication manager I noticed that there is a X under concurrent processing and a tick under the others. Is this X a problem?
I didn't noticed any errors when running the startup scripts, all the exit stauses was 0. One thing though, when I do a ps - ef | grep FNDLIBR I get 7 lines resembling the follwoing:
applmgr 1385 1259 0 08:32 ? 00:00:00 FNBLIBR
applmgr 1388 1259 0 08:32 ? 00:00:00 FNDLIBR
I am running Linux Red Hat, with apps 11i.5.10.2 and the database is 9.2.0.6
Any help gratefulTry to start the concurrent manager with the below steps and post the output /Error displayed on screen
1.Log in as Applmgr
2.Execute the environmental file
3.Navigate to common_top/admin/scripts
4.Execute the command
./adcmctl.sh apps/apps start -
Required Post Upgrade Jobs: Missing jobs and failures
Folks,
In reviewing "Required Post Upgrade Jobs", I found that "Compile Non-Compiled Flexfields" failed. The job was submitted by APPSMGR and immediately started since the Request Process queues were not initially deactivated as reccomended in doc 399362.1. I'm afraid I don't know the password for APPSMGR. Is there a way for me to restart this job so that any successors release?
Only a handful of the required jobs show to have been submitted and run. Would required jobs that have not run and do not appear in the queue need to be manually submitted?
Thanks for any help.All of my post upgrade processes completed without error except the flexfield compile of AR_ADJUSTMENTS_ALL_DFV. It will not compile from within the forms either:
Oracle error 911: ORA-00911: invalid character
ORA-06512: at "SYSTEM.AD_DDL", line 165
ORA-06512: at line 1 has been detected in afuddl() [3_xdd].
do_ddl(APPLSYS, AR, 2, $statement$, AR_ADJUSTMENTS_ALL_DFV): private_do_ddl(APPS, APPLSYS, AR, 2, $statement$, AR_ADJUSTMENTS_ALL_DFV): do_cd_view(1, APPS, 2, AR_ADJUSTMENTS_ALL_DFV, $statement$): : do_apps_ddl(APPS, $statement$): : substr($statement$,1,255)='CREATE OR REPLACE VIEW AR_ADJUSTMENTS_ALL_DFV
(ROW_ID, "CONTEXT_VALUE", AdjustmentStatus,
CONCATENATED_SEGMENTS)
AS SELECT ROWID, ATTRIBUTE_CATEGORY, ATTRIBUTE4,
ATTRIBUTE4
FROM AR_ADJUSTMENTS_ALL'
View Name: AR_ADJUSTMENTS_ALL_DFV
I am going to apply 5484000 Oracle E-Business Suite 12.0.2 Release Update Pack (RUP2) tonight and see if it makes any difference.
Maybe you are looking for
-
I'm using my iPad 4 and my iPhone 4.
-
Issue while Reverse Engineering the HFM Application
Hi, We are in the process of integrating HFM (11.1.2.2.0) with ODI (11.1.1.6) for metadata upload from ODI to HFM, and, I am getting the following error while reverse engineering to the HFM application. org.apache.bsf.BSFException: exception from Jyt
-
Web Template Migration Error in Chart
Hi All, I have a 3x web template 'TEST_3X' It is derived from the SAP default 3x template 0QUERY_TEMPLATE with no major changes/customizing. Only a picture and a data provider has been assigned. It works fine. Now I tried to migrate 'TEST_3
-
Hi, I'm new to Photoshop CS5. I've used it for about a week and liked how I could use Camera Raw to do editing like noise reduction and sharpening and then save the images as JPEGs or TIFFs or open them in Photoshop for further editing. I did this a
-
How to delete certain photos on photo streams?
I like the awesome feature of this app, but ,i really don't want these embarassing pics keeps showing up~