12.1.3 NLS Help Patches

Hi,
After upgrading from 11.5.9.2 to 12.1.3, we are applying 12.1.3 online help patch 9239095.
Where can we find the NLS help patches? Can we merge the nls help patch with generic help patch?
Thanks,
Kavitha

kkrm333 wrote:
Hi,
After upgrading from 11.5.9.2 to 12.1.3, we are applying 12.1.3 online help patch 9239095.
Where can we find the NLS help patches? Please see these docs.
Request For Translated Patch 9239095 [ID 1504876.1]
Oracle Applications NLS Release Notes, Release 12.1 [ID 788053.1] -- Install Online Help
Can we merge the nls help patch with generic help patch?Yes (if they were available).
Thanks,
Hussein

Similar Messages

NLS Language patch for Oracle12.1.1

Hi
I Did Oracle12.1.1 Fresh Installation
Now I am going to apply NLS Patch.
My Question here After Applying NLS Patch is any need to apply Translation Synchronization Patch ?
Thanks
With Regards
Abu Omair Hafeez

Hi Abu;
>
Now I am going to apply NLS Patch.
My Question here After Applying NLS Patch is any need to apply Translation Synchronization Patch ?In additon to Taher please check below and see its helpful
need help for installing R12 on Solaris 10 SPARC 64-bit
Re: NLS patch for EBS 12.0.6
Hope it helps
Regard
Helios

Please Help.Patch Available?

Hi,I just got an i pod nana and do not have the suficient windows version. I am using Windows ME and i know it ***** but i do not have suficient funds for a new computer at the time. I was wondering if there was some kind of patch out there that will alow me to load the i pod software into my computer? I have found one kind of thing but it puts great risk to my computer. Please help. Thank you in advance.
Pentium 4 Windows ME

iTunes requires WinXP or Win 2K.
As you noted, there are "workarounds" but they are not guaranteed to not screw up your system.

Need help patching a kernel to use new ALSA

I have a friend who's just starting out with Arch, and I've been getting him started on his install. His system uses a Biostar 6100-939 motherboard and an Athlon64 processor.
Everything has been working so far except sound. According to documentation, the correct ALSA driver for his nForce4 chipset should be the snd_intel8x0 module. However, loading this module didn't make any soundcards available to alsamixer.
We started to investigate the problem, and recently found this: http://jrbelvin.freeshell.org/weblog/linux/mcp51-alsa stating that the problem is fixed with the 1.0.11rc3 release of ALSA. We also found this : http://www.nvnews.net/vbulletin/showthread.php?t=60493 covering the same issue. We tried applying the patch listed in that forum to a build of the ArchCK kernel. While we were able to confirm that our patch really did patch the kernel, and that the patched kernel built, the snd_intel8x0 module still didn't work when we loaded our patched kernel.
So now it seems like we'll have to properly use the 1.0.11rc3 release of ALSA to get sound working on his computer until 1.0.11 is finalized and merged into the kernel. Does anyone have any experience on patching a kernel to use a different release of ALSA? Any help would be appreciated.
Woogie

I had the same problem with my new computer (less than a week old) using an ASRock K8NF4G-SATA2 board. For me the problem stopped when I switched to the 2.6.16 kernel then in testing but now in current. If it's not working with that kernel try modprobing snd-intel8x0 by hand and running alsaconf.
I actually made packages of alsa-lib and alsa-driver 1.0.11rc4 for myself in the process, but I've switched away from those again, so I don't think they should be needed for NF4/MCP51 to work. That said if your problem doesn't go away I'll be happy to post the PKGBUILDs I modified or even send the packages themselves (with absolutely no guarantees).

Can any body help patches applying through powershell?

Hi,
Is there any posibility to apply patches automatically on servers by using powershell?
In my Environment having vbscript is using for applying patches to servers with notification E-Mail to respective DL.
I'm planing to change script language from VBscript to Powershell.
anybody have any idea about this?

We are not installing patches through WSUS. In share path all the patches will be placed and that share path will be mapped to respective server. some VBscript files are there that are interlinked with .bat file once runs the .bat file automatically files
should be download to respective server then automatically installed patches and reboot will happen after that get a mail notification to respective DL.
This is procedure happening in my environment. My plan is to change VBScript to Powershell.

Help patching a kernel

I've read the three wikis:
http://wiki.archlinux.org/index.php/Ker … _Patchsets
http://wiki.archlinux.org/index.php/Cus … n_with_ABS
http://wiki.archlinux.org/index.php/Ker … n_with_ABS
and am still pretty lost as to what I have to do or which way is best. At the moment, I'm looking at the fallen patchset because of gensplash and suspend2. I'm just not sure where to start and if I could save my old kernel just in case I decide to go back.

Sorry for the stupid mistake and for one (hopefully) last question. Torwards the end I get
patching file drivers/char/keyboard.c
Hunk #1 succeeded at 1144 with fuzz 1 (offset -20 lines).
patching file drivers/char/n_tty.c
Hunk #1 succeeded at 1307 (offset 11 lines).
patching file drivers/char/vt.c
Hunk #1 succeeded at 3970 (offset 155 lines).
patching file drivers/video/bootsplash/bootsplash.c
patching file drivers/video/bootsplash/bootsplash.h
patching file drivers/video/bootsplash/decode-jpg.c
patching file drivers/video/bootsplash/decode-jpg.h
patching file drivers/video/bootsplash/Kconfig
patching file drivers/video/bootsplash/Makefile
patching file drivers/video/bootsplash/render.c
patching file drivers/video/console/bitblit.c
patching file drivers/video/console/fbcon.c
Hunk #1 succeeded at 92 (offset 1 line).
Hunk #2 succeeded at 108 with fuzz 2.
Hunk #3 succeeded at 587 (offset 21 lines).
Hunk #4 succeeded at 1172 (offset 40 lines).
Hunk #5 succeeded at 1855 with fuzz 1 (offset 68 lines).
Hunk #6 succeeded at 1920 (offset 45 lines).
Hunk #7 succeeded at 2097 (offset 74 lines).
Hunk #8 succeeded at 2184 (offset 45 lines).
Hunk #9 succeeded at 2346 (offset 74 lines).
Hunk #10 succeeded at 2521 (offset 45 lines).
patching file drivers/video/console/fbcon.h
patching file drivers/video/Kconfig
Hunk #1 succeeded at 1868 (offset 205 lines).
patching file drivers/video/Makefile
Hunk #1 FAILED at 13.
1 out of 1 hunk FAILED -- saving rejects to file drivers/video/Makefile.rej
patching file drivers/video/vesafb.c
patching file include/linux/console_struct.h
Hunk #1 succeeded at 105 (offset 6 lines).
patching file include/linux/fb.h
Hunk #1 succeeded at 833 (offset 38 lines).
==> ERROR: Build Failed. Aborting...
How do I teel what hunk #1 is?

[NEW] OroboROX, I need help patching it...

Here's the PKGBUILD for oroborox that I'm, working with. I don't know how to automate patching of files. I have included the patches I want in the source=() tag. the problem I see is at least in the lijon patch, the paths to OroboROX are for a directory OroboROX-0.9.5, which doesn't exist.
# $Id$
# Contributor: Nathan Curry ([email protected])
pkgname=oroborox
_srcname=OroboROX
pkgver=0.9.5
pkgrel=1
groups=('rox-desktop')
pkgdesc="A lightweight Window Manager for the ROX Desktop"
url="http://rox.sourceforge.net/phpwiki/index.php/OroboROX"
depends=('rox-lib' 'freetype2' 'gtk' 'x-server')
source=(http://roxos.sunsite.dk/dev-contrib/guido/$_srcname-$pkgver.tar.bz2 http://kymatica.com/OroboROX/0.9.5-lijon.patch.gz http://www.raelh.plus.com/unix/Oroborox-0.9.5-maximise.patch)
build() {
cd $startdir/src/$_srcname
./AppRun --compile
cd ..
mkdir -p $startdir/pkg/usr/apps
cp -rp $_srcname $startdir/pkg/usr/apps
mkdir -p $startdir/pkg/usr/bin
echo "#!/bin/sh" > "$startdir/pkg/usr/bin/$pkgname"
echo "exec /usr/apps/$_srcname/AppRun "$@"" >> "$startdir/pkg/usr/bin/$pkgname"
chmod a+x $startdir/pkg/usr/bin/$pkgname

Go into Control Panel > Sounds and Audio Devices. What is selected there as the preferred device (for playback, and recording)? Which options do you have?
In the right hand corner you should have a little icon that looks like a little loudspeaker. If you open that, you should see your mixer settings. If you go to Options> Properties, you should be able to check the recording settings.
Cat

Translation Synchronization Patch

Hi,
Version is : 12.1.1
DB is : 11.1.0.7
Base Language: US
This is for Production, system is not gone live... Client wanted to install Arabic Language also.
So, I did the following steps.
1. Install AR language through OAM ( I kept US language as Base Language and AR as additional Language)
2. Run Maintain Multi Lingual tables using ADADMIN utlity
3. Applied the 12.1.1 NLS Patch (Downloaded from edelivery NLS pack for Arabic Language)
4. Applied NLS Help patch
5. Started the Services
I did not install Translation Synchronization Patch, since our system is just installed freshly, we dont have any other US languag Patches applied....
that is fine right?
Could you please correct, if i am wrong????

Hi;
Similar topic discussed here before,please check below thread:
Applying new language in EBS Environment
Applying new language in EBS Environment *<< posted by Hussein Sawwan*
How add a new language to existing R12.1.1 environment
Re: How add a new language to existing R12.1.1 environment
Regard
Helios

Patches for help pages on Arabic language on R12.1.1

Hi Friends,
I just installed Oracle Apps R12.1.1 and enabled Arabic language also.
I am able to access the Application in Arabic but could see any help pages on Arabic.
i got confused betwwen the patches (Patch 6746000 - Includes base Release 12.0 and 12.1.1 Online help,
Patch 7303031 - Includes 12.1.1 Online help)
Please let me know the list of patches to be applied to get Help pages on Arabic language on newly installed R12.1.1
Regards,
DB

Hi;
i got confused betwwen the patches (Patch 6746000 - Includes base Release 12.0 and 12.1.1 Online help,
Patch 7303031 - Includes 12.1.1 Online help)
I belive patch 7303031 is enough for Online help:
Please check Note :Oracle Alert Release Notes, Release 12.1.1 [ID 566099.1] this patch strongly recomended.
Also check:
Oracle E-Business Suite Release 12.1.1 Maintenance Pack Installation Instructions [ID 752619.1] Section 2: Applying the Maintenance Pack
iHELP is Not Working After The Upgrade to 12.1.1 : Topic Not Found [ID 848283.1]
R12: Online Help / iHelp Patches [ID 783410.1]
Regard
Helios

I'm running Snow Leopard 10.6.8 and trying to install a purchased copy of Lion 10.7, to no avail. Apple Support doesn't seem to have a solution - help?

I purchased Lion 10.7 on Christmas Day, I received my redemption code a week later. I've tried to download Lion to no avail. I've been in contact with Apple Support and they haven't been much help so far. My computer is currently running Snow Leopart 10.6.8 - however, I received Photoshop Elements for Christmas and I need at least 10.7 in order to run the program. Nothing is working. Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly. I tried installing Mountain Lion, at the suggestion of Apple Support but I need to be running at least 10.8 in order to install that. What do I do? I don't want to have to be pushed into buying another computer when this one works just fine - but I'd like to be able to run Photoshop Elements. Apple has charged my credit card for the purchase of Lion and yet it won't install and I don't know what to do now.

elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download.

Need help with opatch for OBIEE 11g

I'm running into some more of Oracle's typical gibberish and poorly written documentation, and need some help patching OBIEE 11g.
I'm TRYING to follow the instructions here:
https://updates.oracle.com/Orion/Services/download?type=readme&aru=13160647
So, let's see. How about step 2:
For FMW Opatch usage, please refer the doc at :
http://www.oracle.com/technology/software/products/ias/files/fmw_opatch.htm
Well, that IP address automatically redirects to the general download page:
http://www.oracle.com/technetwork/indexes/downloads/index.html
Nice.
So, let's try this doc:
http://docs.tpu.ru/docs/oracle/en/owl/E14571_01/doc.1111/e16793/opatch.htm#CBHDEGBJ
Section 2.3.2, "Patching a Fusion Middleware Product"
Quoting: "Once you obtain the patch, determine the Oracle home directory to which you are going to apply the patch....If you do not know the name of your Oracle home, you should run the opatch lshomes command as described in Section 2.4.6, "Listing the Applicable Oracle Homes for a Patch" to obtain a list of Oracle homes that pertain to the domain."
So let's see, I've got two OPATCH.BAT files, one in c:\mw_home1\Oracle_BI1=OPatch\, and the other in c:\mw_home1\oracle_common\OPatch\.
I open a command window, CD to one of those paths, and run opatch lshomes. I get this error:
"The Oracle Home C:\mw_home1 is not OUI based home. Please give proper Oracle Home. OPatch returns with error code = 1. OPatch failed with error code = 1"
Same results for the other opatch.bat in the other directory.
Besides the atrocious grammar, this error message is not helpful in the least. I'm trying to patch OBIEE 11g, which is installed in c:\mw_home1. What else is opatch wanting?

Yes, the error message is misleading. It should say something like "Environment variable ORALCE_HOME has not been set or set incorrectly".
Here is how I solved the problem on a Windows Oracle Fusion Middleware SOA installation. The SOA installation already comes with OPatch installed. In my case it is located in D:\Oracle\Middleware\Oracle_SOA1\OPatch. On a command prompt, I set the environment variable ORACLE_HOME like this
set ORACLE_HOME=D:\Oracle\Middleware\Oracle_SOA1
and the CLASSPATH variable like this
set classpath=
The latter prevents opatch from loading classes it does not need and throwing java.lang.ClassNotFoundException. Also notice ORACLE_HOME does not point to D:\Oracle\Middleware but D:\Oracle\Middleware\Oracle_SOA1. I made a mistake by setting ORACLE_HOME to D:\Oracle\Middleware kept getting:
"Recommended actions: Please make sure no other OPatch or OUI processes is running. Try to run $ORACLE_HOME/oui/bin/runInstsaller.
OPatch failed with error code = 20"
I wasted a lot of time trying to figure out what went wrong.

Error installing ESA NLS

While running NLS setup patch get the message:
FAILED: file XLIFFImporter.class on worker 2 for product fnd username APPLSYS.
Deferred: file XLIFFImporter.class on worker 2 for product fnd username APPLSYS. (Deferment number 2 for this job)
How can I solve this.

Hi.
Check the patch session log file(adpatch.log &adpatch.lgi) they will be having the error message.
Also check the adworker02.log file which will be having teh descriptive message of error.
Once find out the cause of error.fix the same and then restart the worker 2 again to continue the job using adctrl.
Thanks
Yogi
[email protected]

Install a new NLS on Oracle 12.0.4

Hi all,
I want to install a new NLS on my Oracle 12.0.4 installation. But I don't know exactly what to do.
I followed the steps from the Oracle Applications Maintenance Procedures manual.
I did step 1,2, and 4.
I skipped step 3 because I found that in Note 402310.1
Step 5 says that you could be notified that there is a Translation Synchronization Patch available. Can I find that in the log?
Afther those steps I used adpatch to apply the NLS language patch I downloaded from edelivery. And that gave a lot of errors:
AutoPatch error:
File in pathc is not a know Oracle Applicatiosn file:
'zx reports/NL ZXXVATRV.rdf'
I also get the same errros for frm files.
What did go wrong? And did I do the correct steps to install a new NLS?
Regards K. de Graaf

Hi,
After 7 hours adpatch gave this error:
There are now 7 jobs remaining (current phase=A2):
    2 running, 3 ready to run and 2 waiting.
   FAILED: file WFRESGEN     on worker 4 for product fnd username APPLSYS.
   FAILED: file WFRESGEN     on worker 8 for product fnd username APPLSYS.
ATTENTION: All workers either have failed or are waiting:
           FAILED: file WFRESGEN     on worker 1.
           FAILED: file WFRESGEN     on worker 2.
           FAILED: file WFRESGEN     on worker 3.
           FAILED: file WFRESGEN     on worker 4.
           FAILED: file WFRESGEN     on worker 5.
           FAILED: file WFRESGEN     on worker 6.
           FAILED: file WFRESGEN     on worker 7.
           FAILED: file WFRESGEN     on worker 8.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.What should I do now? How can I fix the failed workers?

French help files

where we can find french help patch for 12.1.3?are they a part of the translation patch?

834708 wrote:
where we can find french help patch for 12.1.3?are they a part of the translation patch?
You can get through (Patch 9239095 - Oracle E-Business Suite Online Help for 12.1.3 Release Update Pack) -- Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
Thanks,
Hussein

Opening "Help" in Windows programs - Can't find KB917607 for SCCM deployment

I'd like to push KB917607 (http://support.microsoft.com/kb/917607) to all of our Win7 x64 workstations, but I don't see it available as a patch (to download) in Configuration
Manager. What am I missing here? I've checked the classifications in the software update point component properties, and all are selected except for Feature Packs and Tools (I'm assuming this Windows Help patch isn't in either of those classifications.) Can
this be delivered via SCCM, or does it have to be packaged and pushed to the clients? Thank you.

Thank you!
I'm also curious to know how you found that answer. I looked all over!
I used google to search for the KB#.
Some times you can import them using the WSUS admin console, but not this one...
e.g. http://blogs.technet.com/b/michaelgriswold/archive/2013/03/13/kb2775511-deployment-for-the-sccm-admin.aspx

12.1.3 NLS Help Patches

Similar Messages

Maybe you are looking for