12/6/2011: I can get into my Yahoo Mail main page but am unable to see the full page, and, am not able to get to my mail at all. Yahoo works if I use MS IE. This just started yesterday; Firefox / Yahoo worked fine for at least 4 +/- years.
Firefox and Yahoo suddenly, for me, stopped working insofar as being able to open my mail.
I removed Firefox from my system and re-loaded it. Same problem.
Hmmmm, http://www.seattlepi.com/ loads fine hear in 10.4.11, FF 3.6.8, but I do see it uses some kind of Flash.
The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
Texas Mac Man's Flash hack/post...
https://discussions.apple.com/thread/3599648?tstart=0
Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
Might be later ones around also... saw 11.3 I think.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
You should also consider the Shockwave Player, which displays Web content that has been created by Adobe Director, much used for multimedia: For PPC Macs: http://get.adobe.com/shockwave/
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html
Then Test Adobe Shockwave & Flash Players...
http://www.adobe.com/shockwave/welcome/
Similar Messages
-
My iphone is getting hot and draining the battery. This started yesterday, I've had the phone for over a year with no problems,
Delete and re-download the Dropbox app. You will have to sign in again and adjust app settings.
-
I can't open any of my Groups pages on Facebook, just my Newsfeed,mobile using Safari (on my Ipad). But they open using Chrome. This just started happening, as it was working fine for months.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that didn't help, tap Settings > General > Reset > Reset All Setting
Restart your iPad.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.
No data is lost due to a rest -
How can I tell how many licenses are included in a volume license? I can login, but am unable to see the number included, just says purchased "1", but not the amount in the volume.
Hi networka,
Please see this page for links to the resources you can use to manage a volume license: Customer resources | Adobe Buying Programs. You should be able to find this information by logging in to the Licensing Website.
Best,
Sara -
I am trying to sign into Genius with my apple id, but everytime I click "continue" the same page just refreshes, asking me to sign in with my apple id again.
You will have more success contacting iTunes Support. We are just fellow users here and are unable to assist.
-
Edited/commented on PDF using Adobe Reader iphone 5 and e-mailed to myself so I could review on PC laptop. I opened on laptop and although I could see the comment bubbles, I was not able to open them to see the comments.
Back to life**
Oh I know there are many other vocabulary mistakes but never mind them I was just too excited when I wrote all of that while typing very quickly
P.S: if you have any question then ask and please do tell me if it works or not with u but I'm definitely sure it'll work so tell me this and we'll get excited together
Also if you have an experience to share then do share it as well please.
Peace -
Can i download java for my ipad, the problem is i open glovis.usgs from my ipad, but i can't see the full page, cause the page need a java...help me please
Nope. The iPad (and iPhone and iPod touch) cannot execute Java applets. It's a limitation in iOS from the beginning (just like lack of Flash). You will either need to use a desktop computer or access a desktop computer via RDP or VNC to access that page on iPad.mIn short: there is no native way to use a Java applet on iOS.
-
I am trying to download the new CS6 Design Suite - not able to get past the previous version.
I am trying to downloat the new CS6 Design Suite and am not able to get past the previous version menu. Getting the message "This serial number is not for a qualifying product. Please try another." How do I get past this?
When you say "Download" do you actually mean install?
Which version are you upgrading from?
Could you try the solutions in the following article: http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html.
Let us know if it helps. -
Can't see the full page of comic life
I can't see the full page of comic life and a lot of apps I have a half-inch of blank screen at the bottom and the top not being used
Click on the full screen arrows at the top right corner.
-
7 Okt, 2013 Faktura 138,00 SEK was my licens ended but still you take money from my account every month ... how come? I have delited all Adobe programs from my computer according to this matter.Please inform what I' am paying for. LS Konsult Åke Löfvenius
Hi, If you purchased from a reseller I would speak to them. If directly from Adobe then please reach out our support chat who should be able to assist.
https://helpx.adobe.com/contact.html -
I click on Mozilla Firefox, which I've used for a several months. It opens as expected and then. within a few seconds, an "iGoogle" page opens. It has no apparent exit. I've tried to right click and Esc. I've tried a power cycle a few times and thhe same thing occurs. I don't recall doing anything to initiate the display of the page.
Check the Home page setting.
*https://support.mozilla.com/kb/How+to+set+the+home+page
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Multiple_profile_files_created -
I've tried it on many sites but always the same result, a new page but no detail. The header details says "search bookmarks and history". Very strange
Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan -
WLC cannot get IP of the Wireless Clients and client not able to ping to the gateway
Dear Cisco Expertise,
I have configured WLC embedded in Cisco C3650 switch and also 1 unit AP3702I. AP now able to join to the controller. My client able to connect to the AP and get the IP address (10.127.117.1) from the DHCP server but unable to ping to the gateway (10.127.117.254 - interface gateway). Both switch and AP able to ping to the interface gateway. I also trying to ping to the client from the switch and also from the AP to the client but not able to ping.
I've check via switch can see the client's IP address and MAC address (using ARP)
#sh arp vlan 77
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.127.117.1 0 843a.4b90.17e0 ARPA Vlan77
Internet 10.127.117.254 - 3c08.f6b7.2173 ARPA Vlan77
Need your expertise on this matter. Thank you.
Configuration as below:
Switch
ip dhcp pool LWAPP_VLAN
network 10.127.117.0 255.255.255.0
default-router 10.127.117.254
dns-server 10.127.113.10
domain-name xxx.com
vlan 77
name LWAP_VLAN
interface Vlan10
ip address 10.127.112.254 255.255.255.128
interface Vlan77
ip address 10.127.117.254 255.255.255.0
ip helper-address 10.127.117.254
interface GigabitEthernet3/0/5
description Connect to AP Test
switchport access vlan 10
switchport mode access
no logging event link-status
wireless mobility controller
wireless management interface Vlan10
wireless security web-auth retries 5
wireless mgmt-via-wireless
wlan APAC-WLAN 2 Wifi-Test
client vlan LWAP_VLAN
ip dhcp opt82
ip dhcp opt82 ascii
ip dhcp opt82 format add-ssid
ip dhcp required
ip dhcp server 10.127.117.254
no security wpa akm dot1x
security wpa akm psk set-key ascii 0 B*MY2014
security wpa wpa2 ciphers tkip
session-timeout 300
no shutdown
ap group APGroup-Test
description "For Testing Purposes"
wlan APAC-WLAN
vlan LWAP_VLAN
AP
interface Dot11Radio0
antenna gain 0
stbc
mbssid
power client local
packet retries 64 drop-packet
station-role root
interface Dot11Radio1
antenna gain 0
stbc
mbssid
power client local
packet retries 64 drop-packet
station-role root
interface GigabitEthernet0
duplex auto
speed auto
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface BVI1
mtu 1792
ip address 10.127.112.202 255.255.255.128
interface Virtual-WLAN0
ip default-gateway 10.127.112.254
ip forward-protocol nd
ip dns serverPls try the below SSID configuration. WPA2 to be configured with AES & not TKIP.
wlan APAC-WLAN 2 Wifi-Test
client vlan LWAP_VLAN
security wpa
no security wpa akm dot1x
security wpa wpa2 ciphers aes
security wpa akm psk set-key ascii 0 B*MY2014
ip dhcp required
no shutdown
This post should give you some help as well
http://mrncciew.com/2013/12/04/wlan-config-in-3850-part-1/
HTH
Rasika
**** Pls rate all useful responses **** -
With this version of Firefox, it automatically loads the 'next' page. When I'm reading blogs, when I click to go back, it automatically loads the first page of the blog as the 'next' page I want to go to. However, it will load this page OVER the page I am on, so that I cannot see it. With some blogs, it is so extreme, I cannot use Firefox on them at all. This isn't an add-on or anything, and I cannot find it in the preferences panel. Can I turn it off somehow/is there a way to in Firefox 4?
That is not standard behavior. You may have installed an extension that causes it.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
Maybe you are looking for
-
Hyper-V Failover Cluster Migration
We currently have two Dell VRTX boxes, one in production, and one not (yet). The new one is running Server 2012 R2 and the production system is running Server 2012. I have read all of the documentation on migrating the cluster to the new servers, b
-
Role of nscd in 5.1 directory server
Hi, Can somebody tell me the role of nscd in iplanet 5.1 directory server? I assume this has to be disabled on directory server for better performance by adding enable-cache hosts no in /etc/nscd.conf file. Can somebody validate this?? If possible wi
-
Getting information about service listeing on port
Hi all, I want to get information on how to get name of the service listening on TCP port (eg HTTP listens on 80). Can anybody please guide me or share code or idea, to do the same. Please respond as soon as possible.
-
How to Use NDS Tool and create a very simple application
Hi All, Today i have Installed NDS on my machine,but i dont know how to use it,is there any guide inside NDS which gives me step by step procedure to create a simple application. Can any link help me know about this.version of NDS is 2.0.9.Is this
-
Media Manager loads to "Switch To or Retry" Buttons
This has been going on for some time, but it's finally gotten to the point that it's annoying. I run Media Manager on my PC so I can stream music into my bedroom when I go to sleep. (Radio stations around here leave a lot to be desired, and the only