12 powerbook or 14 ibook for Final cut?

which is a better for final cut express HD a 12 powerbook or a 14 ibook? which one should I buy (refurbished of course)

Not really.
PowerBook doesn't have a card bus slot. Neither does the iBook.
Then you are left with a single firewire bus PB or iBook and no way to create a second bus.
That isn't an optimum config especially for FCStudio.

Similar Messages

Which is better 12 powerbook or 14 ibook for final cut exprees hd?

which is a better for final cut express HD a 12 powerbook or a 14 ibook? which one should I buy (refurbished of course)

In another post i resolved that a 12 powerbook would be a better choice than a 14 ibbok

Change for final cut pro HD from Pinnacle Studio 10

Hello,
After lots of problems with Pinnacle Studio 10 (windoooooows.....) I finally chose to change for final cut pro HD on Mac OS 10.3.9
So far so good, I did lots of tutorials to learn but there is one very remarkable thing I really miss. Maybe there is just a thing in my configuration to fix...
Is it possible to view a part of a movie without randering it after every simple change? It must be technically possible because studio does it for years now, even with overlays.
Because I just upgraded my ibook with lots of RAM just to try out final cut for the moment, everything runs fine but rendering does take a few minutes/hours.... Well it is ok just to try out maybe I would get a macbook pro if final cut would assure me.
I feel like cutting blind!
Studio renders right before exporting, this may take a few hours but I would do this during night...
As I said, maybe its all my fault and I just have to change some configurations....
thanks for help
Fabi

Make sure your RT settings (upper left menu in the timeline) is set to UNLIMITED RT. This means that the render settings will be adjusted to play back at the best resolution they can without rendering. You might get a green render bar or orange render bar. If you get a red render bar, that means that you have a filter or two that isn't RT and requires a render, or you have too many layers to allow for RT playback.
If you simply drop a raw clip into the timeline and have to render, that means something is wrong. Your clip settings and sequence settings don't match. You need to choose an Easy Setup that matches your footage, then create a new sequence.
Shane

IMac to TV for Final Cut Pro

I'm a newbie so forgive my ignorance.
I have a mid 2010 iMac and I would like to hook it to my HD insignia TV to view playback for Final Cut content.
I just need to know which method is the best (VGA, Mini DV, Hdmi, etc)
What cords & adapters do I need?
I'm running OS X mountain Lion with Final Cut Pro X.
Insignia 32inch HD TV model # NS-32LB451A11 (rev A)
Thanks!

Oh. I also have a Cakewalk US-25 EX 24bit 96 kHz sound card too.

Clean install Leopard or Tiger for Final Cut 2 on my g5?

Hi, I currently have the previous final cut on my g5, on a Tiger operating system. I just got the new Final Cut 2, and I'm going to do a clean install of the OS to have everything running as smooth as possible. Will Leopard speed things up (or slow things down) for Final Cut 2, or should I just reinstall Tiger with Final Cut 2?
Thanks

My biggest concern isn't rendering, it's overall playback performance in final cut pro.
Also, I'm curious as to how much slower motion 3 will be then motion 2 will be, and if motion 3 would run faster or the same in leopard and tiger. If I'm not mistaken I believe motion performance is quite dependent on the graphics card. I have an ATI 256 meg card that ran motion 2 acceptably in tiger, though I'm wondering how motion 3 in leopard will be in comparison (with the same video card and g5)
Thanks

My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5. I now have Maverick ISO and it will not let me load my software so I can continue my film work. ???

My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5. I now have Maverick ISO and it will not let me load my software so I can continue my film work. How do I get it too recover it without paying for it again since I paid for it already and have projects in progress that need to be completed?

1) Partition your hard drive or add an external drive and install Snow Leopard (with the Optional Rosetta) into it and then you can dual-boot (System Preferences:Startup Disk) into Snow Leopard and run FCE 3.5 there.
2) Use one of the following methods to install FCE 3.5 into Mavericks:
a) Pacifist: http://www.charlessoft.com/
b) Jeremy Johnstone's Terminal method: http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
Reports on this forum seem to confirm that Final Cut Studio 2 will continue to operate in Mavericks once it is functionally installed, albeit some plug-ins may fail to function. FCE 3.5 is the same generation as FCS2, and presumably will continue to operate in Mavericks, as well.

Where can I find a full manual for final cut pro 6?

I'm trying to learn final cut because I haver an amature film making contest I'd like to enter and that would give me quite an edge, considering most of the intries will be using movie Could someone help me find a full manual or something that would assist in this indevor? I do only have final cut 6 because I am using my schools imac and that is ther vertion they have. so, can anyone help?

You should ask your question in the Final Cut Studio forum.
This forum is for Final Cut Pro X.

WHAT IS THE BEST VIDEO CARD FOR FINAL CUT PRO and MOTION?

Hello folks,
I have found a lot of posts regarding all kinds of troubles with ATI READEON X1900 video card.
When I talked to people from Apple, trying to decide which videocard to install in new MAC PRO, Ati Radeon X1900 was the one they did recommand for FCP and Motion. So are there any other cards which would actually suite better for Final Cut Studio2, or is Ati Radeon X1900 really the one to go with?
Thanks for any suggestions,
Kootenay

Techreport has some more information on the new 55nm Radeon (X3000) which should be another "mid November" releases, as well as an updated 8800 GT that still is under wraps.
So seems Intel and everyone else is trying to get new products out before the end of the year, if possible.
Drivers for graphics controllers may or may not need the work that sometimes seems to plague companies.

Can I add a secondary location for Final Cut Pro Documents?

Hi Guys,
I'm working on a large project which has taken up most of my 2tb hard drive which I use for my final cut pro documents (capture scratch, render files etc). Is it possible if I plug in another hard drive to use that as a secondary location for final cut pro documents as I have other (smaller) projects which I could be uploading and working on in the mean time? If so, how is this achieved and what are the pros / cons?

Sure -- go to Final Cut Pro menu on your menu bar and select System Settings.
The first tab is SCRATCH DISKS -- that's the term too -- not secondary folder for FCP Documents.
Change it there.
Drawbacks...
It has been a while since I've had to deal with this, but FCP used to not remember (feature or bug??) a project's original scratch disk location and if you change it for ONE project it will be changed for ALL future AND past projects... until you change it back.
Now, that in itself isn't a BAD thing. All that that means is that if you continue to capture material into that old project it will now put it over here instead of over there. Also, other things like render files and such which won't really matter much unless they do... and now you've got stuff spread over a coupla drives.
FCP's projects don't care. They've already mapped where they need to go to get the video and render files it needs. Move your Scratch Disk 33 times... won't make a difference to the browser and timeline. -- UNTIL you remove one of the important drives. THEN red lines galore! Un renders, missing files... messy messy messy!
Much better to start and finish a project in scratch disk. Makes for easy cleanup. Kinda like cooking thanksgiving dinner (American??) in 5 houses at once.
Good luck,
CaptM

Canon EOS MOVIE Plugin-E1 for Final Cut Pro Now Available...

There's been so much talk about the 5D, 7D, 550D on this board that I'm going to point to the EOS MOVIE Plugin-E1 for Final Cut Pro. This is supposed to speed to transcode of Canon Camera H.264 to FCP-friendly formats and let you add more metadata along the way.
Enjoy!
Canon webpage. Under Drivers & Downloads. Once you select your OS, "Mac OS X", the download should appear near the top of the "Software" list.
Note: (from Quickstart Guide)
This plug-in software allows you to convert MOV movies shot with an EOS Digital camera into ProRes files at high speed in the (Log & Transfer) window of Apple's Final Cut Pro.
FWIW: The quick start guide says cameras involved are 7D, 5D, 1D, no mention of 550D. Sort of odd.

For users in North America to make the Canon EOS REBEL T2i work (550D for Europe):
1. Install the new Canon EOS MOVIE Plugin-E1 for Final Cut Pro (http://www.usa.canon.com/consumer/co...nloadDetailAct)
2. Go to Library/Application Support/ProApps/MIO/RAD/Plugins/CanonE1.RADPLug/Contents/Resources/
2. Open up cameras.plist
3. After the 7D info add the following lines of code (keeping to the coding structure):
<key>T2i</key>
<array>
<string>Canon EOS REBEL T2i</string>
</array>
4. Save the text file. Close it. Everything should work now.
Cheerz.

Following Media Files Are Not Optimized For Final Cut Pro

I'm sure you've seen this before and I've tried to search for a thread on it here and fell asleep, so sorry if this is a repeat.
I have edited projects in Premiere Pro (on my PC) and I have tried to transfer them in FCP. It worked with the exception of two things:
1. the error message, "Following Media Files Are Not Optimized For Final Cut Pro"
2. the quality *****! watching it on the playback in FCP it looks great, but then when I burn it to Disc it's pixelated in spots and generally has a lower quality picture.
I know that it's Standard Def. and can't expect the best, but I've done it before (once or twice) and it didn't seem this bad.
Can someone suggest anything to help the quality? Should I run my AVIs through MPEG Steamclip to make it a QT file and if so what is the best format in that since there are many to choose from and most I'm not familiar with?
Thank you,
Crayton

I did compress them to DV NTSC then burned it to DVD and the result was no bueno.
I thought what I would do is try compressing them again before I send them on over to DVDSPRO. Here is a simplified break down of the situation:
- I have edited the raw footage in Premiere Pro on my PC. They were recorded and captured as SD.
- I rendered them in Premiere, then transfered the rendered AVI file to FCP.
- When went to place the files in FCP, I received the warning message; "Following Media Files Are Not Optimized For Final Cut Pro" but I went forward anyways and it allowed me to do so.
- Originally I went ahead and compressed them from FCP to QT Movie as a DV NTSC, which ended up poorly.
- Therefore my question is, should I compress them using another file type (other then DV NTSC)? Which leads me to another program that I have called MPEG Streamclip, which offers tons of file types of which I am unfamiliar with most. I want the best quality of course but don't know what file type is the highest going from AVI to a format that can be accepted by FCP and ultimately DVDSPRO. Keeping in mind that I only have FCP5 and do not have Prores.
Did that make sense?
Thank you again,
Crayton

Which firewire interface for Final Cut Pro on MacPro?

I currently own a Presonus Firepod, and it seems to work pretty well, but may sell this when I upgrade from a MacMini to a MacPro. I use my Mac for Logic Pro currently.
I anticipate running Final Cut Pro in the near future, so I'm wondering about the ability to read/generate SMPTE time code that the MOTU traveller supplies?
There will be no external mixer, so this interface will connect directly to speakers & headphones. (would be nice to be able to mute speakers and control headphone mix using just the firewire interface).
I don't anticipate needing more than 2 Mic inputs - and my current mike is a Rode NT1. (As the NT1 is not a top-of-the-line mic, unsure if I should place a lot of emphasis on worrying about the pre-ams?)
I would like decent mic preamps, and ability to graphically monitor input and output levels (is this graphic monitoring necessary, or is just the single overload indicator sufficient?).
Which interfaces in $600-$1500 range would work best with Final Cut Pro - and Logic Pro?

I saw the Traveller ads in Videography mentioning
time code, so I presumed it had an advantage over
other interfaces.
I found this in some ad copy:
"""The Travler provides on-board SMPTE time code synchronization features that allow you to slave your Traveler system to SMPTE time code without a synchronizer. The Traveler provides a DSP-driven phase-lock engine with sophisticated filtering that provides fast lockup times and sub-frame accuracy. The included MOTU SMPTE Console software provides a complete set of tools to generate SMPTE for striping, regenerating or slaving other devices to the computer."""
So it likely uses an audio port for timecode I/O. However, unless you have external equipment that you want to slave to Logic Pro, (or have Logic slave to) e.g. a timecode DAT, then this really is not necessary. FCP would not see the Travaller as a "controllable" device.
For Final Cut Pro use, I'd probably shoot in HDV.
When shooting a green screen near my computer (or
maybe even on-site), I wondered if there would be an
advantage to recording the audio thru an interface
like the traveller.
The advantage is that you could capture additional mics and audio tracks with your mac while the cameras shoot. Just slate your takes and sync up later.
Do I actually need an interface that provides time
code, or is that only needed for movie work?
I have SMPTE I/O on my Unitor8, directly accessable in Logic Pro. In 8 years I've probably used it twice to capture audio from some modular digital multitracks. So, unless you have some specific need.....
Maybe it is simpler just to connect to the mic
directly to the camera's input?
Indeed. You should always have camera audio available. Anything else is supplemental. Alternatively, you could use the Travaller or RME, etc. as a "live to camera" mixer in a studio situation. Plug your mics into the interface, create a submix and send it to the camera while simultaneously capturing each mic to an individual track in Logic Pro. There are many possibilities.
G5 QuadPPC2.5, Ram:12.5g, Magma PCIe-PCI expansion Mac OS X (10.4.8) 2X Hammerfall DSP Digiface+Multiface, Digi 002r, 4X UAD-1

I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

You can't run iMovie 11 on a PPC G5 running the old OS 10.3 Panther - which is what you say you have.
iMovie 11 - cameras supported:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
iMovie 9 - cameras supported:
http://support.apple.com/kb/HT3290?viewlocale=en_US
iMovie 8 Camcorders supported:
http://support.apple.com/kb/HT1014
Digital camera RAW formats supported by OS X Lion:
http://support.apple.com/kb/HT4757?viewlocale=en_US
Digital camera RAW formats supported by OS X Snow Leopard:
http://support.apple.com/kb/HT3825?viewlocale=en_US

Is the NVIDIA GeForce 8800 GS worth the money for Final Cut Express?

Hi,
I'm considering a new iMac 24, but not sure if the speedier on is worth the money.
Currently I use a MacBook Pro 2.2 for Final Cut Express with a 23" cinema (mostly DV, some HD) and that works okay, but won't play back in real time when I composit video.
Anybody know if the NVIDIA GeForce 8800 GS will help in that area?
Thanks,
KC

The speedier video card is great for 3D stuff, but it won't matter a wink for Final Cut Express, which barely makes use of the video card.
Keep in mind that Final Cut is using the CPU, not video card, to perform the editing, decoding, and encoding of the video. The only time the video card comes into play is during playback of the video, and any of the video options available for iMacs will handle that just fine.
When you composite video, the hard-disk throughput will start to come into play. The dinky 5400 RPM disk in your laptop will adversely affect the performance of that.

I can't install trial version for final cut pro x

I can't install trial version for final cut pro x on my computer..

What are you trying to achieve? Are you editing movies as a hobby? Or trying to build a business – and, if so, what kind?
iMovie is the first thing that comes to mind. Not the depth of FCPX, but it can still do some excellent work.
Russ

12 powerbook or 14 ibook for Final cut?

Similar Messages

Maybe you are looking for