120 day trial-period
Which of these licenses have a 120 day Trial-period?
Table 5. Software Packaging and Licensing
License
Chassis Based or Port Based
Part Number
Supported Features and Platforms
Cisco Nexus 5548 FCoE NPV License
Chassis
N5548-FNPV-SSK9
FCoE NPV features supported on Cisco Nexus 5548
Cisco Nexus 5596 FCoE NPV License
Chassis
N5596-FNPV-SSK9
FCoE NPV features supported on Cisco Nexus 5596
Cisco Nexus 5500 Storage Protocols Services License, 8 Ports
Port
N55-8P-SSK9
Fibre Channel and FCoE and FCoE NPV features supported on any 8 ports of Cisco Nexus 5548 and 5596
Cisco Nexus 5500 Storage Protocols Services License, 48 Ports
Port
N55-48P-SSK9
Fibre Channel and FCoE and FCoE NPV features supported on any 48 ports of Cisco Nexus 5548 and 5596
Cisco Nexus 5500 Layer 3 Base Software License
Chassis
N55-BAS1K9
Static routing, RIPv2, OSPFv2, EIGRP stub, HSRP, VRRP, IGMPv2 and v3, PIMv2 (sparse mode), routed ACL; OSPF scalability is limited to 256 dynamically learned routes,
VRF-lite (IP-VPN)
Cisco Nexus 5500 Layer 3 Enterprise Software License
Chassis
N55-LAN1K9
Full EIGRP, OSPF with scalability up to 8000 routes, BGP; maximum routes supported by Layer 3 hardware: 8000 entries; uRPF
Cisco Nexus 5500 VM-FEX Software License
Chassis
N55-VMFEXK9
Cisco Data Center VM-FEX supported on Cisco Nexus 5548 and Cisco Nexus 5596
Cisco Nexus 5548 Enhanced Layer 2 Software License
Chassis
N5548-EL2-SSK9
Cisco FabricPath supported on Cisco Nexus 5548
Cisco Nexus 5596 Enhanced Layer 2 Software License
Chassis
N5596-EL2-SSK9
Cisco FabricPath supported on Cisco Nexus 5596
Cisco DCNM SAN Software License
Chassis
DCNM-SAN-N5K-K9
Cisco DCNM for SAN Advanced Edition for Nexus 5000 Series
Cisco DCNM LAN Software License
Chassis
DCNM-L-NXACCK9
Cisco DCNM for LAN Advanced Edition for Cisco Nexus 3000 and 5000 Series
Hi Andrey,
All of these licenses have 90 day evaluation periods. You can download them from the following link: https://tools.cisco.com/SWIFT/LicensingUI/Quickstart#. Next, click "Get Other Licenses > Demo and Evaluation...". DCNM licenses will be under Network Mgmt Products and N5500 licenses will be under Routers & Switches.
-Eric
Similar Messages
-
How to implement a 30 day trial period?
Hello,
I'm trying to implement a 30 day evaluation period for a pure C# WinForms commercial application. The requirements are basically that an uninstall / reinstall should not reset the countdown and it should not be trivial for the user to do it himself. It would also be nice if it were obscured even from detection using SysInternals regmon / filemon software.
I'm thinking of storing the install date somewhere, but where? I tried using isolated storage, but was disappointed to see it just stores as a normal file in the user's Application Data directory.
Certainly this problem has been solved before. Thanks for any ideas...in c# this code work for me,
try it
The Code snippiest is,
In your main Application, add this code to Programm.CS
using SecureApp;
static void Main()
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
string path = @"Software\Tanmay\Protection";
Secure scr = new Secure();
bool logic = scr.Algorithm("tanmay", path);
if(logic ==true)
Application.Run(new Form1());
Here all the necessary information will save in Registry.
So you must provide a valid path, which will create this dll.
In this case the password is : tanmay,
Those two things are provided as,
bool logic
= scr.Algorithm("tanmay", path);
The main code scr.Algorithm(,) is as follows,
public bool Algorithm(String appPassword, String pass)
globalPath = pass;
bool chpass = checkPassword(appPassword);
if (chpass == true) //execute
return true;
else
bool block = blackListCheck();
if (block == false)
string chinstall = checkfirstDate();
if (chinstall == "First")
firstTime();// installation date
DialogResult ds = MessageBox.Show("You
are using trial Pack! Would you Like to Activate it Now!", "Product key", MessageBoxButtons.YesNo, MessageBoxIcon.Information);
if (ds == DialogResult.Yes)
Form1 f1 = new Form1(appPassword,
globalPath);
DialogResult ds1 = f1.ShowDialog();
if (ds1 == DialogResult.OK)
return true;
else
return false;
else
return true;
else
string status = dayDifPutPresent();
if (status == "Error")
blackList();
DialogResult ds = MessageBox.Show("Application
Can't be loaded, Unauthorized Date Interrupt Occurred! Without activation it can't run! Would you like to activate it?", "Terminate Error-02", MessageBoxButtons.YesNo, MessageBoxIcon.Error);
if (ds == DialogResult.Yes)
Form1 f1 = new Form1(appPassword,
globalPath);
DialogResult ds1
= f1.ShowDialog();
if (ds1 == DialogResult.OK)
return true;
else
return false;
else
return false;
else if (status
== "Expired")
DialogResult ds = MessageBox.Show("The
trial version is now expired! Would you Like to Activate it Now!", "Product key", MessageBoxButtons.YesNo,MessageBoxIcon.Information);
if (ds == DialogResult.Yes)
Form1 f1 = new Form1(appPassword,
globalPath);
DialogResult ds1
= f1.ShowDialog();
if (ds1 == DialogResult.OK)
return true;
else
return false;
else
return false;
else // execute with how
many day remaining
DialogResult ds = MessageBox.Show("You
are using trial Pack, you have " + status + " days left to Activate! Would you Like to Activate it now!", "Product key",MessageBoxButtons.YesNo, MessageBoxIcon.Information);
if (ds == DialogResult.Yes)
Form1 f1 = new Form1(appPassword,
globalPath);
DialogResult ds1
= f1.ShowDialog();
if (ds1 == DialogResult.OK)
return true;
else
return false;
else
return true;
else
DialogResult ds = MessageBox.Show("Application
Can't be loaded, Unauthorized Date Interrupt Occurred! Without activation it can't run! Would you like to activate it?", "Terminate Error-01", MessageBoxButtons.YesNo, MessageBoxIcon.Error);
if (ds == DialogResult.Yes)
Form1 f1 = new Form1(appPassword,
globalPath);
DialogResult ds1 = f1.ShowDialog();
if (ds1 == DialogResult.OK)
return true;
else
return false;
else
return false;
//return "BlackList"; -
Our thirty day trial is over. We cannot now save anything . Everytime we try to save the thirty day calender pops up. It is asking us now to purchase iwork 09
can someone explain.The thirty day trial is free to allow you to assess the applications. After that you have to pay if you want to continue to use it - the suite is not free. You can purchase iWork online when you visit apple.com/iwork/trial and click Buy Now in the upper right of the page: this link now leads you to the Mac App Store when you can purchase the three programs individually.
-
I've been with CC since 12/13. Downloaded LR and PS(64bit) and worked fine. Last month, when trying to open PS on desktop, it only allows me a 30 day trial (even though I'm paying monthly fee). When I try to download PS again I get error code 50. Any help please.
sign out and then back in to your cc app.
if that fails, follow solution 2 here, CC desktop lists applications as "Up to Date" when not installed -
HT201318 How do you downgrade free 15 day trial period of ICloud?
There is a fifteen day grace period where you can downgrade iCloud storage. How do I do it????
If in the US, follow the link below (you must request a refund within 15 days) -
https://discussions.apple.com/message/16968425#16968425
it gives the USA phone number - if you don't live there you will have to find an equivalent number from the 'Contact Us' link at bottom right of this page. -
Trial version ended in one day??? I didn't get the entire 30 day trial period
I down loaded photo shop elements free 30 day free trial yesterday, and today when I try to open it, it states trial has ended...........I don't understand what happen or why it ended. Please help!
I believe that you need to do following things:
Uninstall the current broken installation of PSE from the machine.(If it indeed got installed)
Run the clean up script to remove any licensing bits remaining on the machine of previous trial installation which got expired in a day:
http://kb2.adobe.com/cps/406/kb406241.html
and then manually remove any leftovers of PSE 7.0 from machine by following below link:
http://kb2.adobe.com/cps/405/kb405847.html
Now, try to install you new purchased PSE and use the serial number which you have got.
This should get you working. PSE does allow the user to install on Windows XP SP3 so there must be some funny things happening on your machine which should get resolved by following above links.
Let us know if it works.
Ankush -
Is there a place on the website where older versions of Dreamweaver and Creative Suite can be registered and activated?
Unable to activate | Macromedia products - http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html
As far as Creative Suites go, there are about 7 of them, so which one are you having a problem with? If it happens to be CS2 or older, then see the following... Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 - http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l -
Windows Server 2008 10 Day Trial
I have downloaded and installed the "120 Day" trial version of Windows Server 2008 R2 Standard. When I run slmgr.vbs -dli it is only showing 10 days left. I tried running the rearm switch and it once again show 10 days. What do I need to do to actually
get a full trial period?Hi Seeker5,
Where did you download the trial version of Windows Server 2008 R2 OS?
You should have 180 days evaluation period with 3 times rearm count. Please download the trial version of Windows Server 2008 R2 from the
link below.
http://www.microsoft.com/windowsserver2008/en/us/trial-software.aspx
Regards,
Karen Ji
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” This posting is provided
"AS IS" with no warranties, and confers no rights. -
I would like to cancel my subscription, I am within the 30 day initial period.
Dear Sir/Madam,
I would like to cancel my subscription, it seems very difficult to do so - despite still being within the initial 30 day trial period!!!Hi Bev,
Thanks for the response - however I wish it were as SIMPLE as clicking on the link you supplied. I tried this myself before posting here. For someone who is attempting to cancel within the 30 day period - there is no automated button that one can click on. Instead you have to 'speak to an advisor' - for which there is a verrrry long
waiting time.
However I did perservere (after all, I was keen to avoid any billing charges) - Anyway when I did finally get through - I was offered all sorts of incentives to stay - until I had to ask if I had accidentally been put through to 'sales' instead of 'customer services'!!!
Anyway, I (think) finally managed to cancel - hope it all goes through as expected!!!
M -
What happens when trial period runs out?
My PSE9 included a 30-day trial for Lightroom3. I'm thinking about giving it a try but have a question: What happens to the new images I import into Lightroom's library after the 30-day trial period runs out, especially if I decide not to buy Lightroom?
The images will still be where you put them on your computer. Simply go to the folder.
-
Acrobat revert to previous version at end of XI free trial period if I don't purchase?
What happens to my existing version of Acrobat (acrobat X standard) if I install the trial version of XI at the end of the 30 day trial period? Has it been destroyed by the XI installation? Or does it just revert (in the event that I don't decide to purchase).
John Waller's advice is absolutely not recommended or endorsed by Adobe in any way whatsoever.
You can only have one version of Acrobat fully and properly installed at one time. If you install Acrobat 11 without letting the installer uninstall Acrobat 10, you end up with a version of the AdobePDF PostScript printer driver instance as well as the PDFMakers for Office overriding what you installed for Acrobat 10. There are many known issues/conflicts involved with trying to maintain parallel installations of two versions of Acrobat on the same system!!! And if you expect to uninstall Acrobat 11 and have a working Acrobat 10, you may be very disappointed. That is why by default, Acrobat's installer will uninstall the old version(s) of Acrobat on your system before installing the new version.
If you really wish to try out Acrobat 11 (actually, wait a few hours and you can try out Acrobat DC 2015; Acrobat 11 will be gone), making sure you have a copy of the serial number for your Acrobat 10 installation, install the trial of the new software, allowing it to uninstall the old. If you don't wish to license the new software, uninstall it completely and then fully reinstall Acrobat 10 using the Acrobat 10 serial number that you have saved.
- Dov -
I'm in the trial period for Creative Cloud - I have about 19 days to go on Photoshop CC on my iMac. Can I use the same CC trial on a second machine? Specifically on a Windows 7 machine?
Nothing personal to you or Rajshee, but this is exactly why I absolutely despise these "community forums" (not just Adobe but any company). I called the Tech Support phone line today after digging and digging for a phone number, and they told me the exact opposite, and they did it a lot faster than it was possible to get a forum response. (That's really not personal, because you can't control that, but it's a fact.)
Their answer: As long as I'm signed in with the same ID, I can try, say, Photoshop CC on my iMac at home and also try Acrobat Pro CC on my Windows 7 machine at work. Same account, same login, one trial.
This makes complete sense to me as I'm financially on the hook (potentially) for the same package. If I give away my login to someone else, which I wouldn't do, I'm still on the hook. This is why the cloud approach to software is such genius and I applaud it.
BTW, 99% of the "community forum" wrong answers come on Microsoft sites, so don't feel bad. -
Trial period for adobe cs6 is how many days?
I have install trial for Photoshop CS6 on 2nd June 2014 and today it shows 0 days remaining. trial period for adobe cs6 is how many days?
Adobe trial software expired early
Mylenium -
Help! My CS3 does not open. It tells me that I have 12 days left in my trial period
Help! My CS3 does not open. It tells me that I have 12 days left in my trial period. What do I do?
Must I first deactivate the Vista machine? I've already stored it.
Thanks
Al Heisley
Editor, Kenny Youngblood's Fuel Coupe Magazine
Auto Racing Writer & Photographer
B2B Copywriter
Las Vegas, Nevada
702-860-6060
[email protected] -
Can I extend my After Effects trial period for another 30 days?
Good day. I am hoping to find a way to extend my trial period for AE. I purchased CS6 Classroom in a book and need about another week to finish the lessons.
Thank you,
Brad.Hi Ned,
Thank you very much for the reply.
Brad.
Maybe you are looking for
-
I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get th
-
Remote Desktop Client Update 3.8.2 v.11 remains in Software Update queue but, is listed (several times) under "Updates Installed in Last 30 Days". This is also the case with HP Printer Software update 3.0 and Digital Camera RAW Compatibility Update 6
-
Dear All, I am writing BDC for F-28 Where wanted to add multiple line items in screen 0731 for the field rfo5a-sel01 It's urgent Regards Shashikant
-
Two days ago I have bought this player. Today after loading from a computer it has ceased to work. The computer finds disc, I can write down and transfer data, but the player does not work. The battery is charged, tried another. At my friend same on
-
OK, Downloaded OSXVCN And Want To Connect To My Neighbor's Mac, How?
Hi folks. I just downloaded OSX VCN for my iBooK G4, OSX 10.4.7 and want to connect to my neighbor's Mac with the same OS. She and I want to experiment and see if we can get this going. Does she download the same app I did? Am I the viewer or server?