120 GB Needs To Be Restored Every Time Plugged In

Hi, this is my first post here as I've encountered a new issue I have been unable to find any answers for. I searched here and on Google repeatedly but a solution has yet to be found (for me).
A little over a week ago I updated my iTunes to the newest version, and soon after, when I plugged in my iPod, iTunes told me that it couldn't read the contents of my iPod and that it needed to be restored. I immediately freaked out and disconnected the iPod to find that it said I no longer had any music on it. I plugged it back in and was able to dive into the folders and see that there was, in fact, music on it. So I copied everything off the iPod, restored it, and reloaded everything back on, which took about eight hours total.
I thought maybe the new version of iTunes screwed up my iPod, so I installed a previous version and got the same result, so I restored and reloaded again. Today I brought my (fully loaded) iPod to work to test on my laptop, which does not even have iTunes on it, and when I ejected and disconnected it, it once again told me it had no music on it and was restored to factory settings.
Does anybody know what's going on here, or how I can remedy this problem!? I really do not want to have to wait 4+ hours to reload my iPod every single time I plug it in to my computer. It isn't that old, isn't damaged that I know of, and I am clueless as to why it must be restored continuously. Any thoughts or suggestions? Thanks!

Doublechecking something known to cause those symptoms.
By any chance, do you have a copy of WinAmp installed on that PC?
If so, try slim's suggestion from the following post:
http://discussions.apple.com/post!reply.jspa?messageID=11170851

Similar Messages

  • IPod needing to be restored every time plugged in

    I have had my 120 gig iPod classic for a little under a year. I updated my iTunes and now, every time I plug it in, it needs to be restored. Once I restore it, it is fine, takes a million years to reload all of my music and is fine until the next time I plug it in. I have tried reinstalling iTunes and the same problem still happens. Can't figure it out. Any advice would be greatly appreciated because I don't live anywhere near an Apple store.

    Doublechecking something known to cause those symptoms.
    By any chance, do you have a copy of WinAmp installed on that PC?
    If so, try slim's suggestion from the following post:
    http://discussions.apple.com/post!reply.jspa?messageID=11170851

  • IPod Classic stores about 6000 songs and when I try and add more from library it detects van iPod in recovery mode and needs to be restored every time.

    How to fix an iPod that only takes 6000 songs and then goes into recovery mode and consistently asks for restore?

    Can you play the song in iTunes?
    If you can't the song file is probably corrupt and needs to be replaced.

  • My tabs will not restore after starting Firefox -- even with the option to restore my tabs and windows is checked in the "options" window. I'm losing tabs from previous sessions that I need to keep open every time I need to restart. Thanks for any advice!

    Is there something else I need to tweak to get rid of this annoyance instead of simply clicking the check box? I'm losing tabs from previous sessions that I need to keep open every time I need to restart. Thanks for any advice!

    Make sure that you do not use Clear Recent History to clear the <i>Browsing History</i> when you close Firefox.
    *https://support.mozilla.com/kb/Clear+Recent+History
    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js
    * [3] http://kb.mozillazine.org/Multiple_profile_files_created

  • HT1414 why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

    why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

    Hi Cyprus11,
    Thanks for visiting Apple Support Communities.
    If your iPhone is shutting down unexpectedly, I recommend going through these troubleshooting steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Best,
    Jeremy

  • IPhone 4 has to be restored every time I want to sync + Other ridiculous problems

    Hey,
    I am on a Windows 7 (64x Ultimate edition) machine, and I own an iPhone 4 16gb, and pretty much 75% of the time I plug my iPhone in to sync it, it will get to syncing the files (whatever they may be, regardless if there are any new updates or nothing at all) and then it will say:
    The iPhone cannot be synced. A duplicate file name was specified.
    After this, i must restore my iPhone. From here, I then click on the latest backup and click restore. This is where it gets stupidly ridiculous.
    The progress bar for the restoration won't move unless I click and drag the little restore box around my screen. It's as if the computer doesn't realise it's meant to be doing anything unless i'm physically dragging and dropping the window all over my screen. What the computer estimates to take about 3 minutes (I have never had it work propperly so i don't know how long it usually takes) will take me about 20 minutes of me dragging and dropping.
    THIS IS THE MOST ANNOYING THING I HAVE EVER EXPERIENCED.
    Once it is finished, it will disconnect for 10 seconds, reconnect and be fine. then i can backup the phone and sync etc. Sometimes when i connect to the computer it is fine and backs up and syncs fine, but the majority of the time it screws up (always in the same way) and i have to go through the process again.
    If anyone could PLEASE shed any light on how i can fix this, it would be unbelievably appreciated, i've dealt with this problem for about 8 months hoping with each iTunes update that it would be fixed but alas it has not.
    Other info regarding iTunes:
    I have two internal harddrives, C: and D:.
    D: was my original harddrive (320gb so when i upgraded computers i moved it into my new one as a slave to a 1tb harddrive. I still keep all my iTunes stuff on my D: drive and have iTunes installed on C:.
    My music on my phone is manually managed so no, it doesn't sync music when it plugs in; it only syncs new apps (+updates) and new photos.
    If you require any additional system information then i am willing to post.

    It's not a matter of me assuming to restore it, once the error comes up, the only next step I can do is to restore it. I can't access any of the iphones settings in itunes or anything, it's a mandatory restore. If I just cancel the sync (before restoring) and disconnect the phone, all my apps crash on opening: aka unusable phone. So I have literally no choice but to restore every time the error shows up if I want my phone to work.
    I have no idea where I may have duplicate files as it doesn't tell me, so if that is the problem (which I don't think it is) then I don't know where I have to go to delete the duplicates.
    And the duplicate file error still doesn't explain why leaving iTunes to restore the phone doesn't work and me having to drag the window around. I know it sounds utterly ridiculous, my friend didn't believe me when I told him either but then I showed him and he was as confused as I am. If I just leave the restore to do its own thing at it's own pace, it will loa maybe 20% then fail for whatever reason.

  • White keyboard needs to toggle power every time computer is started

    I need to toggle power every time computer is started. OSX doesn't 'see' the keyboard when restarting or starting.
    ALSO
    When running XP in bootcamp, I can get XP to 'see' the keyboard, but I can't get it to work at all.
    Please help.

    Hello tak:
    I am assuming your Bluetooth module is built-in.
    There is no software setting to address what you describe. The KB may have a problem. However...
    Instead of switching the device on and off, try tapping a key or two.
    Try installing new batteries and/or removing and reinstalling them.
    I do not run Windows (and never plan to do so) so I have no feedback on the XP issue.
    Barry

  • HT4972 after upgrading my iphone4 to ios7.04, the 'restore' in itunes seems to be going round in circles resulting in the iphone wanting to continually 'restore' every time. Whats happening here?

    after upgrading my iphone4 to ios7.04, the 'restore' in itunes seems to be going round in circles resulting in the iphone wanting to continually 'restore' every time. Whats happening here?

    Hello Filbert,
    Thank you for providing the details of the issue you are experiencing with your iPhone wanting to continually restore.  I found an article with steps to address the issue you described:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please try to troubleshoot security software issues.
    You can find the full article here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I need more storage but every time i try to buy it says payment method declined however i can buy any app from the app store with the same method

    i need more storage but every time i try to buy it says payment method declined however i can buy any app from the app store with the same method

    Make sure there is enough funds for storage. Contact your bank and verify they are not stopping transaction.

  • Ever sense I updated Safari, I need to log on every time I visit a forum, what happened?

    Ever sense I updated Safari, I need to log on every time I visit a forum, what happened?

    Open Keychain Access located in /Applications/Utilities
    Select Passwords on the left.
    Use the search field top right corner of that window to find the MLB keychain. Now right or control click that keychain then click Delete.
    Now in Safari go to the Safari menu bar top of your screen, click Safari > Preferences then select the Autofill tab.
    Make sure User names and passwords is selected.
    Navigate to the MLB site (forums), login with your user name and password. You should be prompted to save that data to a new keychain. Click Yes.
    Sometimes keychains can become corrupted and need replacing. The next time you revisit that site you should not have to enter the password.

  • Need to restore every time I connect iPod?

    My iPod (new nano, v1.0.1 software) works just fine. Plays music like a champ. iTunes (7.4.3.1, WinXP) works as expected, too. However, every time I connect the iPod, iTunes declares that it is in recovery mode and needs to be restored before it can be used w/ iTunes. It restores just fine, but I'd like to be able to bypass this step.

    Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore

  • Have to restore every time I plug in to comp

    Every time I either plug my nano into the computer to charge or add new songs, I get an error telling me to restore my ipod to factory settings and clean wipes it. I then reload my 16 gigs of music and do it again when I need to charge.
    Needless to say, its getting frustrating, any way to fix this other than exchanging my ipod at an apple store?

    The problem is that your ipod is trying to connect to a drive on your computer that is already in use. See the article below. When you change the drive letter, you to restart your computer before the changes go into effect.
    http://thoughtsfrommylife.com/article-794-iTuneshas_detected_an_iPod_in_recovery_mode_-_Use_iTunes_torestore

  • My bluetooth needs to be paired every time I start the car

    can anyone give me any help with the problem that my new 3G iphones needs to be unpaired and paired again every time I start the car (Range Rover). My original iphone (once paired) connected automatically each time. Has the bluetooth way of working changed on the 3G. Any advice appreciated.

    The bluetooth stack of the iPhone 3G is not working. if you check on the www.bluetooth.com web site, iphone 3G IS NOT APPROVED for bluetooth compatibility ...
    After debugging, I found that the L2CAP of the iPhone 3G is not answering properly the Bluetooth request from the hand free profile.
    Apple should not advertise bluetooth 2.0, they are not compatible.
    PS: the admin deleted my previous post, explaining the detal about it.
    Is Apple aware of the problem?
    <Edited by Moderator>

  • My iMac needs to be rebooted every time I put it to sleep

    My iMac needs to be rebooted almost every time when I wake it from sleeping. Is this normal?  Ether the screen darkens and it will tell me to reboot by holding down the power button or the screen is just totally blank. It's been doing it for a long time and I thought it was just mac security updates running in the backgrownd or something but it seems to be getting worse.
    Thanks

    Do this:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.

  • Mail needs to be restarted every time I awake my computer from sleeping,

    Every time I awake my computer from sleeping, Mail needs to be restarted.
    Why's that?
    The problem is that if I'm not aware of i it, my Mail stays offline.
    Any help?
    Thanks
    Nico

    This is a bug that doesn't affect everyone. I can't reproduce it and I don't know what triggers it. The following steps have been reported (but not confirmed by me) to work around it in some cases:
    Turning off Dictation
    Turning off the built-in firewall
    Turning off the Energy Saver setting to allow hard drives to spin down when idle
    Changing DNS servers
    That's all I've been able to find out.

Maybe you are looking for

  • Getting Started with Swept Sine (DAQmx) Multiple Response Signals

    Hi, I've been using the modified version of the Getting started with swept sine.vi for multiple response signals https://decibel.ni.com/content/docs/DOC-24474. Program fully suitable. However, I am facing with three issues : 1) The edits are highly n

  • How do I upgrade from OSX 10.7.2 toOSX 10.9?

    How do I upgrade from OSX 10.7 to OSX 10.9?

  • Starting NWDS help!

    Hi All, I am stating with NWDS and I am getting this challange!! I was reading one thread that was saying "Next, we must to import the aii_map_api.jar library. The file aii_map_api.jar is located in j2ee\cluster\server0\apps\sap.com\com.sap.xi.servic

  • Assembly Cost

    I am working on a Trading client.There is no PP module includes here. After Goods receipt, they do the assembling of spare parts and makes a final product. Now they want to add the Assembling cost to the final product Inventory. How can we add assemb

  • Xcode 3.1 Java Missing Compiler/build options

    Hey, Ive been using xcode for a couple years now, under the 'Project->activebuild' there use to be settings where one can change the compiler and such. Some how the compiler for java is set to 1.3, im getting now generics supported for all my Vector<