1212M Crackling/Popping - FIXED

I wanted to report some exciting news. After my previous post breaking down the crackling problen in detail I got to thinking (yes, I know, dangerous). I began wondering "what if something that the driver (or DSP) is doing is causing the delay that makes the pointers cross over in the buffer?" I've always used my 1212M as a straight I/O device meaning I don't use any hardware-based effects or processing. I simply have one strip for input and one strip for ouput. I thought that was the simplest configuration PatchMix could have.
To verify that assumption I found a signal flow diagram online and looked it over. I realized that there is an even simpler path available. Instead of having a channel strip for output with nothing on it and using a Monitor line to connect that strip to the analog output, I could remove the Monitor (or Mix) line and add a Send to the strip that would go straight to the analog output. This eliminates the Patchmix final mix and also the meters and maybe some other processing from the signal path. So I tried that even simpler configuration and the crackling problem has GONE AWAY! I've now been running over 24 hours with nary a crackle or pop.
This really isn't a "fix" because the card *should* be able to use the standard pathway. It's more of a workaround but it's a workaround that I'm perfectly happy with since it gives me what I really wanted, clean I/O at 24 bit / 96Khz. There is definitely still a consistent hardware based problem in some 1212M cards and I believe it could be addressed by further driver changes from EMU but in the meantime I'm finally a happy camper. Hopefully this tip will help some other user that's having the same problem as I was.

Markran,
Thank you for the information. I will make sure that it gets routed to the correct people.
Casey

Similar Messages

1212M Crackling/Popping - New Drivers

I'm kind of cranky about this problem. Read on because I actually know exactly what the problem is (at least for most of us and only Creative/EMU can fix it).
Background
I have a 1212M with the 0404 I/O card. It's a V1 that have had for five or six years. The quality of the sound is great, the features are great and the price is great. There's just one problem. From the day I got the board all those years ago I've had the crackling/popping problem that many, many other users also have.
The problem is not my motherboard, BIOS, other hardware, Windows or other applications. Over the years this EMU board has been in many different systems, many different configurations and the evolution from WinXP, Vista and now to Win7. The crackling problem has always been exactly the same. The problem is the board itself, not the system and not the configuration and I can prove it (read on).
Another thing that frustrates me is all the time that so many users have spent trying to troubleshoot this issue that is completely wasted since, for some of us, the problem is in the EMU hardware/drivers. That's not to say that there aren't some other crackling problems that are related to the system speed, interfering hardware or interfering software. There are actually two different problems that both have the same crackling symptom which makes all this quite confusing. I'll call them "System Related" and "EMU Hardware/Driver Related". If you're having the crackling symptom you should figure out which type of problem you have before spending hours troubleshooting, reinstalling, etc, etc, etc. Here's how:
If your crackling problem:
- Doesn't happen on startup. Your audio is fine and the problem only develops after a while. On my system it's between 60 and 90 minutes and resetting the card.
- Starts with a few minor crackle/pops per second and gradually gets progressively worse over several minutes with nothing else changing in the system (ie not running new software or changing anything).
- After a while (can be a long while) the crackling can actually go away again and you have clean audio. Then the crackling returns. Once again with no changes in system load in between.
- You can make the crackling go away instantly and every time by simply resetting the clock on the card. There are several ways to do this. In Patchmix go to the System tab under Session Settings and switch the clock between internal/external (whatever you have it on, go to the other and back again). Another way is the change the ASIO Buffer Latency milliseconds in your host software's ASIO control panel.
If those four things are all true for you then you have the "EMU Hardware/Driver Related" type of crackling problem. Do not waste any time with all the well-meaning but misguided troubleshooting ideas posted on this and other forums. None of it will help.
If these four things aren't true on your system then by all means you should try all the troubleshooting steps because it's likely that you can resolve your crackling problem.
Here is what is happening with the "EMU Hardware/Driver Related" type of crackling problem. First, let me say that I know what the root of the problem is because I used to work for a company that developed high-end professional video/audio software for Windows PCs. We encountered this exact same problem when some our users started reporting it. It wasn't solely with Creative or EMU hardware because the problem can actually happen on a variety of PC audio cards where the hardware is slightly out of spec or malfunctioning and the software driver is not capable of correcting the problem.
Our most senior software engineers banged their heads against this problem for quite a while until they determined what was going wrong in our customer's PC audio hardware. The issue is that the clock on the card is drifting slightly which means it is going a little faster or slower than the current sample rate. That's why the problem only manifests after a while. It's also why the crackling goes away when you reset the clock. The fundamental issue is that the audio data coming from your PC is being written into a buffer. The data is written by the PC driver and read from the buffer by the card and then sent to the card's output. You can think of the buffer as a big circle of memory. There's a write pointer that writes one value of data and then increments one step and "180 degrees" opposite in the circle of memory is a read pointer that reads one value of data and then increments one step.
These two pointers never move at exactly the same speed. They are constantly slowing down or speeding up a little bit but over time on average they end up advancing at about the same rate. The problem is that when the clock on the card is drifting, the read pointer and write pointer will eventually cross over. That's why the this kind of crackling problem manifests only after a while because, depending on the drifting, it takes a while for the pointers to cross. It's also why the crackling is subtle at first and then gets progressively worse over time. Right when the pointers are overlapping the timing is still close. As one pointer starts to "lap" the other point more and more the crackling artifact gets progressively worse. That's also why the problem usually goes away again if you wait long enough. The pointers can actually get back in phase again for a short while! That's how I know exactly what the current problem is the 1212M board because it manifests with these precise characteristics. The old problem my former companies user's had even sounded exactly the same as the crackling my EMU 1212M has.
Once we understood the problem, in our next version we modified our software to use a larger buffer. This eliminated the problem for some of our customers whose hardware clock was only very slightly out spec. However, for other customers the problem remained, although by increasing the buffer size it made it take longer for the pointers to reach each other and the crackling to begin. This is the what I suspect EMU has done with the new Win7 beta drivers. With the new drivers my crackling takes longer to appear. In these forums we see reports from some long-time sufferers of the problem that the new driver fixed their problem and from others we hear that they are still having the problem.
Since we still had unhappy users of our video/audio application software, we kept working on the issue and eventually came up with a fix that solved the problem for all users and all audio hardware. It was hard to implement but this is what EMU/Creative needs to have their driver engineers do to actually fix the problem (short of replacing an enormous amount of hardware).
The problem can be solved in the driver (yes, my old company actually embedded our own low level generic driver in our application software). Since EMU/Creative is making their driver themselves they can just implement this fix there. The secret is for the driver to actually keep track of where the write and read pointers are and each time they get too close to each other it stretches or shrinks the next packet of data by averaging the audio samples in that packet to the exact size needed to put the pointers 180 degrees apart again. It then resets the pointers as it writes that new data. The data shrink or stretch prevents a single pop or click from happening when the pointers are reset to their correct positions. Frankly, this was hard to implement but it worked perfectly. We actually hired a consultant to figure this audio problem out who was a former Microsoft engineer who wrote the WDM kernal mode drivers.
EMU SUPPORT please let your product manager know that this is what is going on and that he should ask your contract driver engineers to implement this type of solution. Yes, it will cost more in development time (and hence $$$), but it will fix the issue once and for all and not just for this card. You can re-use the code in other drivers.
If you need specific help, I'll even connect you with the engineers that did it for a more detailed explanation (we sold our company years ago and the team has split up but I'm still in contact with most of them).

Markran,
Thank you for the information. I will make sure that it gets routed to the correct people.
Casey

I fixed my soundcard snap crackle pop is

hello, good news i hope for all. ever since i upgraded my system to a 939 chip i experienced the dreaded snap crackle pop. i use to do the restart thing, then the problem would go away. untill recently i formated my ide hardri've in to 2 80gb dri'ves for xp, the other to x64. my free comcast mcafee antivirus would not work for x64 so i deleted x64. i still have the the option in my bios for which os i want to select xp pro or x64. but who cares. i can hit my sleep button or hibernate button and i don't have to restart. no snap crackle pop. my specs are (a8v) motherboard, (x2 4400+ dual core) cpu-oc'd to 2.45, (crucial ballistix tracer) memory 5:3 3-3-3-8 @246 , audigy 2sz platinum. i hope this work for all. i am sure you can resize your hardri've to give you more gb back. i am afraid to mess with it right now. i would like to know if this works for others.

/ Im on an X58 build too, except I run Crossfire, my XtremeGamer XFI PCI shares an IRQ with 2 pci express roots, and 5, and 2 microsoft UAA bus drivers(my cards have HDMI audio controllers) I get the worst crackling in BF242 during orbital strikes...... have you tried to update to INF 9..0.04?Message Edited by Radnsmash on 04-8-2009 2:00 PM

Possible Audigy 2 ZS popping fix

I'm not sure if something like this has already been posted, but I'll chime in my 2 cents anyways. I installed my Audigy?2 ZS card again last night after being annoyed for months with it and using my onboard audio because of the popping and crackling issuse. The driver version that came with my CD is .82.0.2 and I had no crackling at all, but I did have an issue with trying to seek on windows media player...everytime I would try and skip ahead in a track or video the sound would like reset to the highest level and come blasting through my speakers. So I updated to the newest with drivers available 2.09.006 and the crackling/ popping returned! *Cries* but the seeking problem with media player was fixed. I then uninstalled the newest driver and installed my old drivers that came with my CD and the crackling went away *Cheers* but I still have the seeking issue with media player. I would rather have my game playing and audio be clear and deal with the seeking issue than have the crackling problem. I am curious though as to if I can just update some of the things like the THX setup console, EAX console and Surround mixer and that would fix the seeking issue. But I'm not sure if those updates are only compatible with the newer ZS driver version like 2.09.006Message Edited by FeiTality07 on 04-22-2007:6 PM

Unfortunately, there is little you can do. This is a problem nati've to Soundblaster cards since the original Audigy (some people claim it arri'ved with the Li've!). Search in this forum for SCP (snap crackle pop), and you will find hundreds of topics on the problem. There is no real answer, although the best I could do to get rid of it was to dump the Creative Labs drivers, and install the KX project drivers instead.
You can find them here :
http://kxproject.lugosoft.com/index.php?skip=
Other than that, there are dozens of things to try which some people have claimed have worked, but none of them fixed the same problem on my system. If you feel like trying, just search either for "crackling" in this forum, or "SCP". You will find suggestions like moving your Audigy to a different PCI slot, reducing soundboard hardware acceleration, reducing vidcard acceleration, changing PCI Latency settings, etc. etc. etc. Unfortunately those suggestions are all merely bandaids. The real solution must come from Creative Labs.
R.

Audigy SE newest update 2/16/07 made my crackling/pop issue wo

im starting to have little faith in that creative is going to be able to fix all these problems with vista and their sound cards. the new driver update that came out yesterday made the crackling/pop issue worse, guess im gonna have to install the older drivers again and just wait for the next update.. sigh

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

Audio Crackles & Pops in disk burned by iDVD

I videotape using my Sony HDV camera (1080i), and import directly into iMovie06 HD. From what I've read on these forums, that is the best way to keep the full quality HD video. I edit my movie and close iMovie. Then I open iDVD, choose a theme, and drag that movie in. I don't add any other transitions, etc. Then I choose "Best Quality," and burn the DVD. When I play it in my Panasonic Blue Ray DVD player the audio crackles and pops--it's terrible. What happened? What can I do to fix this so that the audio quality is as good as it sounds on the HD videotape or on the Mac.

Hmmm. Crashing isn't good, but no harm to try again with Pro.
iDVD's Preview isn't always accurate, but do you hear anything there?
Burning errors wouldn't typically present themselves as crackles/pops, but high quality discs are recommended (Verbatim DVD-R discs are often suggested; I like Sony as well) as well as breaking down the burning process into two steps:
1) from iDVD, create a virtual DVD by using Save As Disc Image. Test this by mounting the disc image and using Apple's normal DVD Player to play it on your Mac (try just double-clicking the image file).
2) If it plays correctly, Copy the disc image to an actual DVD using Roxio Toast or Apple's Disk Utility.
It's good to have a substantial amount of hard disc space available (10-25 gigs) and I typically quit from other applications so iDVD can have max resources available.
All the audio work in iDVD is behind the scenes and there aren't any special audio controls.
John

Snap, Crackle & Pop :( Audidgy 2 ZS Platinum Pro - Plz H

Hi all,Im having some serious issue's with my Audidgy 2 ZS Platinum Pro...For the past week my sound card has?been SNAP, CRACKLE & POP with terrible noises thru my KRK?Rokits RP6SE studio monitors. I have tried a full uninstall of the drivers and software then a reboot and then a full re-install of everything that comes on the Audidgy disc and nothing i have tried has fixed the problem, i have not installed anything else on my pc before or after this has happened and no new hardware has been added either.Now i've had this problem many times in the last 2 years since i purchased this crap card but the problem has always gone away within a couple of days and has never been as bad as what it is now. I remember seeing a couple of years back on here about this same issue and it was at least 9 pages long with everyone saying the same thing about this?S/Card?and that Creative were working on this issue,?and i was hoping someone on here could point me in the right direction to rectifying this problem i have as all music production work is now at a stop as the noise im getting is to much to work with... This is the spec of the PC thats running the Audidgy....amd athlon 64bit 3800+ 2.4ghz processor?x maxtor maxline 2 - 300gb HDD x maxtor Diamond 0 - 250gb HDDGigabyte N-force 3 motherboard ( K8 Triton )Soundblaster Audigy 2 zs platinum pro - model SB03602 x pioneer 09 dvd/cdrw X 500watt ATX power supplyIm desparate to get this sorted as there are tracks i need to get finished asap....Any help would be more than apprieciated... ThanksRob Dj Benson...

Mate so far i have tried my soundcard on every slot in my machine, i have 5 slots and the only slot that will actaully recognise the card is the slot it normally uses, i've uninstalled and reinstalled, i've updated the drivers which was a waste of time, i've even cleaned the card and also where my PC is situated it is in a nice cool place, the room temp is actually cold, my pc is running at 33oC so theres no problem there with 5 fans inside it running it nice and cool. Temparature is not the issue, its these crap drivers that creative have made, my pc health is in very good condition and im running out of idea's on what to try next... i know its not an irq problem as i've checked that aswell so i dont think there is much more to check...
A reply from Catherine or Dale wouldnt go a miss seeing as they seem to be the know all and end all of creative products, sorry if im sounding like im having a dig here, im just fed up with all the crap that creative are coming out with over this issue and not attending to the real problem and that is a solution to fixing these cards instead of blaming N-Videa all the time.
This is the first week off work i have had in 5 months and so far i have achieved nothing in terms of studio production, i have spent the last 5 days trying to fix this bloody card and im not a happy bunny... I even signed that petition last night as a result of creatives lack of technical support, and im sure the other 8500+ people who have signed it feel exactly the same way...

Speaker crackle/pop at shutdown

Have New Pavilion M9510F connected to new W2338H with HDMI cable. Sound & video work fine but when shutting down, receive a sharp crackle/pop through monitor speakers. No problem when connected with VGA & Audio cable. HP techs say this is result of computer shutting off power to speakers. Just want to be sure this is correct & I don't damage speakers. Anyone else have this issue?
RAD

I have the same problem with the crackling sound at shutdown. I have logitech speakers hooked up and don't use the speakers on the monitor. Hp technical support has tried to trouble shoot the problem but wasn't really to "fix" the porblem. At the end of the day, they said the sound was common. The recommendation was to just turn the monitor volume down to 0. Now I don't hear the popping sound. I still don't feel that comfortable with the fix as it is just a band-aid.

Audigy 2 ZS Snap, Crackle, Pop and a c

I just got a new Audigy 2 ZS. My system is as follows:
Athlon XP 2800+
Gigabyte GA-7N400 Pro
Nvidia 5900
.5GB DDR
Altec Lansing 4. speakers
I have all the latest drivers and bios for everything. I've switched PCI slots and I've tried all the knowledge base action items. The speaker config is for 4/4. speakers.
I get crackling, popping and an occasional chirp with most applications:
Musicmatch Jukebox 0
Adobe Audition .5
Magix Audio Cleaning Lab 2005
Windows sounds
Half Life 2
I don't get the sound problems with some applications:
Creative MediaSource Player
Sid Meier's Pirates
Rome: Total War
Riddick Escape From Butcher's Bay
Half Life 2
I listed Half Life 2 because it is the clue! After installing the card, I got horrible sound from HL2. I opened the audio properties and the game was configured for 2 speakers. I changed the config to 4 speakers and the sound is perfect and amazing.
I went back through the applications, and the ones that work are driving 4 speakers, and the ones that don't are only driving 2. This looks like a straight up driver issue. If the application asks for 2 speakers only, then the card produces distortion.
If anyone can confirm this observation, then perhaps it will point toward a fix.

Thanks for the tip. I tried it and unfortunately it didn't work.
Since the card will produce clear sound when driving all 4 speakers, the card and speakers should be ok. I'm still getting the problem when any application is only driving 2 speakers. This one's a real head scratcher.

Constant crackling/pop + inability to install standard drivers + audio loss

Oh Lord, what a disaster Creative is. I have a Creative X-Fi XtremeGamer Fatalty Pro that worked fine under Windows XP for four straight years. Then on the fifth year when I upgraded to the Windows 7 x64 Beta it ceased to function. It never continued to work with the Release Candidate, RTM or Retail versions so I just gave up until a few days ago when I thought maybe Creative or the community fixed some of my issues...
Hah, fat chance. Anyways it all began with severe audio distortions, pops and crackling that would sometimes end in a flat-line tone or eternal static. No matter how many times I reinstalled my drivers, used older drivers or used user remedies nothing worked. So I just gave up, took out my sound card and sucked it up with my Realtek integrated motherboard audio (eugh).
Well I can't stand it anymore. I'm too much of an audiophile to settle for anything less so I tried my sound card out again. I still had the same problems only now I can barely install any Creative drivers as the installation will constantly ask about a file called layout.bin.[url="http://consumerdocs.installshield.com/selfservice/viewContent.do?externalId=Q0892&sliceId=" rel="nofollow"> I followed this solution[/url] but it does not work at all and there are no other responses on the issue.
But that's OK because I can still install the base X-Fi drivers. Unfortunately it never resolved my issue. Older drivers do not work. There's nothing other than crackling and popping and then an utter loss of audio. Then I heard about Daniel_K and used his drivers (X-Fi Prelude Beta and X-Fi Support Pack 2.0). I was elated when everything installed without a single issue and the audio was perfect... until after maybe an hour when the crackling came back. Then it started getting progressi'vely worse until you can't even decipher what's being heard. I tried a couple reinstalls which would fix the issue for a short spell but then it'd degrade exponentially from there.
On top of that I couldn't use any of the Creative software with either Creative's drivers or Daniel_K's. It would never detect my sound card even though Windows had no problem seeing it. So I spent literally 5 hours of my day prowling these forums, Google and my own experiments with no luck.
So rather than looking for a solution I'm just gonna ask for one. I have an EVGA 680i motherboard, Intel Core 2 Duo E6600 @ 3GHz, ATI Radeon HD 5850, 6GB RAM, Creative Sound Blaster X-Fi XtremeGamer Fatalty Pro and .5TB HDD space.
I know Creative stated that nForce motherboards might have an issue with the X-Fi but I've never had that problem with XP and I heard it's found in many other boards from different manufacturers. Creative also stated problems with more than 4GB of RAM but I've disabled all but 3.5GB of RAM with no success. I know Creative states that this is a PCI issue and that I should mess around with my BIOS settings. Updating my BIOS, disabling unneeded BIOS features, changing PCI slots and getting rid of my overclocks did nothing.
I [b][u]KNOW[/u][/b] that it's [color="#ff0000"]not a defecti've card. Everything works 00% with Ubuntu 9.0. Thanks for your time. I'm probably just wishing for gold to pour from the heavens and wasting my time. =(

ORe: Constant crackling/pop + inability to install standard drivers + audio loss? Alright, don't ask me how but I managed to mostly fix my crackling and popping issue. I fixed it with a combination of rearranging all of my hardware to different slots and reinstalling my drivers for the th time, only this time mashing Daniel_K's drivers with Creative's.
Now getting the drivers to work is another thing. I have sound and it's superb (the only reason why I'm willing to sacrifice so much of my time to get this to work) but I cannot get any other function out of my X-Fi. I can't open up the console, switch modes, enable effects, etc. Also, if I ATTEMPT to screw around with any audio settings my computer will start crackling like the devil and all of my hard work will be undone, prompting another reinstall requiring the utter removal of anything Creative on my PC to work.
Now I think the reason for this is because whenever I try to install any Creative software from Creative themselves (except the driver) it won't install. It will ask about a layout.bin, I would point the installation to where layout.bin is but then it'd give me an error (Error I-00). According to my install.log I'm missing something called CTShared. I try installing it but it doesn't seem to fix my problem.
Also, installing ALchemy will tell me that it couldn't create a shortcut after installation and will not work. Sometimes the installation will say that there is a newer version of a product and that it won't install even though there is no trace of anything Creative on my computer.
Now Daniel_K's drivers and software install fine, but the software WILL NOT detect my sound card. It will constantly tell me that the audio device wasn't found or that it's not installed. Windows sees it fine, though, and I get perfect audio. So I mashed Daniel_K's drivers with Creative (long process) and everything installs fine, everything looks to run fine but for some reason nothing will start up. So so much for my own modding attempts. >_<
Any solutions?

Disable 24-bit crystalizer... and where did the snap/crackle/pop

For the longest time, I thought the crackling and popping was because of the CMSS3D Headphone option being enabled, but just for kicks, I tried disabling the 24-bit crystalizer, and poof! Where did the snap/crackle/pop go? It seems to be gone! I can li've without the crystalizer, after all there is really no way to make something sound better than the source. This gives me hope that it is a driver issue after all. I have a Rev A fatalty.

It is still there... you cant just hear it as good anymore.. i never have crystalizer on, i still got my rice crispies. So good if you dont hear it anymore.. but i know this wont fix it for many of us. I can agree that if i have cmss3d enabled but have MacroFX and Elevation Filter off, the pops& crackles are lower in volume.

Whenever I call my home phone, I hear a lot of snap crackle pop sounds with 3G active.

whenever I call my home phone, I hear a lot of snap crackle pop sounds with 3G active. If I turn off 3G, this stops. How do I fix this?

there is no fix. It's a GSM 3G thing. I used to be able to go to the movies and put my phone next to a movie theatre speaker and it do the same thing....
i just figured the newest 3G technologies did away with it

DV6 IDT audio crackle pop click issue

I have pavilion dv6 with the crackle pop sound issue. It almost sounds like it crackles when the bass hits or higher notes. I have tried disabling hp 3d thing, that didnt work.
I updated newest drivers. Just very frustrating.

updated Atheros Wireless LAN Driver
Fixed issue, so far, Will see if problem stays away if so I'll not send it in for repairs.
First time says christmas, i have been able to use my notebook. HP FAIL.
How did the techs not even update my drivers when i sent it in for repair. They did more work than necessary changing out speakers that were perfectly fine.
But ill keep this upadated.

Solution for crackling/popping so

I was messing with?the settings in supreme commander?to try to fix the crackling/popping sound and I turned off anti aliasing (excuse spelling). Then started playing and no crackling at all. Turned it'son again, crackling, then turned it off no crackling. Try this out and let me know if it works for you guys.

i am using youppax software and drivers with a mobo asus a 8n32 sli and x-fi fatalty soundcart and off or on(allways On ) NO PROBLEMO AT ALLThe only stupid thing is that i cant burn cd/dvd with my plextor

Audigy Platinum EX making crackling/popping sou

Whenever I'm pressing a key on the keyboard (qwerty keyboard, not midi keyboard) and a sound plays, it makes a very loud and annoying crackling/popping/static sound. It does this primarily in games, but it can also do it Windows. I've been dealing with this for close to a year and I am fed up with it. If I cannot get these issues resolved, I will never buy another Creative product again. I would greatly appreciate any help to fix this problem.
System configuration:
AOpen AK-79D 400Max nForce2 motherboard
AthlonXP 3000+ Barton (400 MHz FSB)
2x-52 MB PC3200 GEIL DDR in dual channel
Leadtek WinFast A350 TDH MyVIVO (GeForce FX5900)
Promise FT S50TX2 RAID card
250 GB Western Digital SATA + 250 GB Western Digital ATA in a RAID0 stripe configuration
Klipsch Pro Media 5. speakers
PowerRight 500 watt power supply

I also have the exact same problem. Most prevalent when playing games as a result of holding a key down. Note I have an Audigy2 What do you mean? Check out GET CREATIVE.
ABIT AN7 MB
XP 3200 +
Audigy2
Powercolor ATI 9600 Pro video
GIG Crucial Xtreme XMS M2M
2 - 80 GIG Raptor SATA Dri'ves Mirror 0
350 Watt PS
Does not matter which keyboard.... I've tried several.....had the exact same problems with
ABIT NF7-S
XP 2800 +
I think I am going to go through my BIOS settings?
Can anyone help?

1212M Crackling/Popping - FIXED

Similar Messages

Maybe you are looking for