123 keys not working on extended keyboard usb

Hey everyone
My extended keyboard isn't working properly. 0.Enter123 are not functioning. It doesn't appear to be a number lock issue as the rest of the number pad is functioning. I'm thinking its software related. Anyone experienced this problem?
Set up...
iMac (21.5-inch, Late 2012)
2.9 GHz Intel Core i5
16 GB 1600 MHz DDR3
Yosomite 10.10.2
Cheers

would be pretty quick to test keyboards use generic drivers so connecting it to any other mac or windows or linux computer would show if the keys work

Similar Messages

  • Volume and brightness keys not working with new keyboard on imac

    I just purchased a new wired keyboard for imac and brightness and volume control keys not working . i have tried adjusting keyboard settings. I have software version 10.5.8. Do I need to upgrade software. Thank you for any help.

    Do you have "Automatically Adjust Brightness" check box ticked in System Preferences > Displays > Display ? If so, you can't manually adjust brightness.

  • Using shift key not working with bluetooth keyboard

    Am I missing something here? Or does the shift key not work with the iphone using a bluetooth keyboard?  I'm using the logitech K810 for reference on iphone 6 iOS 8.1

    The shift key works just fine on my Bluetooth keyboard.  So I would imagine this is an issue with your keyboard.

  • Satellite Pro A10 - some keys not working with new keyboard

    Hi all
    I hope some1 can help with this
    i have a Satellite Pro A10. The prob i have is a.b.n.and enter keys are not working and its a new keyboard
    i fitted into my other A10 and all keys work so keyboard is fine.
    All works ok with usb keyboard. Had motherboard out all seems ok.
    Any help plz
    chris....
    Message was edited by: widgy

    Hi
    Why do you think that the motherboard is ok?
    Maybe its a keyboard controller issue
    Did you check if the cable was connected properly?
    In my opinion if you are 100% sure that the keyboard is ok then the issue must be related to the motherboard because there is no other part which is placed between the keyboard and mobo.
    Bye

  • Volume keys not working on wireless keyboard

    Hi guys!
    My f10-11-12 keys are not working for volume purposes. I went into prefereces, keyboard, uncheck/check the "use F1, F2... blahblah" and the problem is still there.
    I am using a macbookpro 13" 10.6.6.
    By the way, if I try to do the same in the built-in macbookpro keyboard it works
    This post did not help either https://discussions.apple.com/thread/2298682?start=0&tstart=0
    Thanks in advance!

    Thanks for asnwering... Yes, of course I have tried because is how it works
    It could be that fn key does not work, but it isnt since If I uncheck the box "use fn key for f1 f2 standar.." the volume keys still not working.

  • MacBook Keys not working even after KeyBoard Firmware update

    My friend's sister bought me a MacBook from the US last October. Fortunately, Apple announced the release of Leopard also on the same month and I got a free upgrade to leopard. I installed leopard about 3 months back. My keyboard was working fine when I had Tiger installed. After I installed Leopard, I remember installing a Keyboard firmware update once through the Software Update.
    About two three weeks back, my MacBook started acting wierd. Some keys were not working (mostly 't', 'q', left shift, left command, zero which is not working even now. I couldn't close the last bracket because the key is not working. I am a php programmer and I can't think of living without the closing bracket and zero keys . But most of the keys works on and off.
    After seeing on several sites that it is a problem with firmware, I once again downloaded the firware update, but couldn't install it since the installation wizard says that my system doesn't need it.
    Can someone plz tell me what to do now? Will reinstalling help?
    Thanks in advance.

    The problem persists everytime I restart my system or wake it up from sleep. But each time different keys have problem. I am now downloading update 10.5.4. Can someone plz help me?

  • Various keys not working on apple keyboard in 64-bit windows 7

    Has anyone ran into an issue with the 64-bit version of windows 7 where the "=" on the numeric keypad of the apple usb keyboard stops working?
    I have tested it in OSX and the key still works, and it also even works in the 32-bit version of windows 7. The only thing that stupid "=" key doesn't work on is 64-bit windows 7.
    Any ideas to resolve this issue?

    I've tried several different versions of the On Screen Display from the Hotkey Features Integration for Windows 7, including 6.60.03, 6.60.01, 6.60.03, 6.42.00, 6.24.00. And every time, it's the same thing. Everyhting works but the brightness control OSD.
    What else can I try?

  • Ten key not working with wireless keyboard

    Hello everybody,
    Does anybody know how to configure the wireless keyboard, so the ten keys will work?? It frezzes my laptop everytime I active any of the these keys...
    Thanks!
    Enriqueta.

    what kind of keyboard, Apple brand or some other?
    also what are "ten keys" - function keys, number keys?
    usually no configuration should be required once the keyboard is recognized,
    keyboard is not supposed to cause your system to freeze.

  • Eject key not working - Tried another keyboard

    Suddenly my eject key is not working. I have tried holding it for several seconds. The eject logo shows up on my desktop. Itunes can open the drive, toast can open the drive, eject menu can open the drive. A second aluminum keyboard will also not open the drive.
    Since the drive can be opened by software, I need to know what system file to open and what code to look at so I can fix this thing I have read lots of temporary fixes in the forums here (use iTunes or the menu extras eject script) but I want a real solution. It used to work and I want to know why it stopped.
    Is there a way to examine keyboard mapping or something??
    Thanks
    Message was edited by: Peter Mars

    Apple authorized service provider has replaced the logic board due to various weird problems including sudden loss of startup chime, freeze on waking from sleep and memory issues.
    During the repair event (it was an event let me assure you!) the service people noticed the Superdrive was plugged into the number 2 position on the ribbon and since there was nothing in the number one spot, the eject key didn't work. I had tried holding the option key while pressing eject (for drive position 2) but that didn't work either so not sure if switching to connector #1 or new logic board solved this problem, but the DVD tray now opens and closes using the Media Eject Key!!!

  • Some Keys not working on the keyboard

    Specifically the "T" and "5" keys refuse to work.
    Have tried a reboot, logout, no luck.
    Macbook Pro Core 2 Duo "Mermon" 2.33 Ghz 3GB Ram ....
    Anyone else with this problem, or solutions?
    Thanks
    -Robert

    I have spent 20 minutes loging on in order to complain about my MacBook Pro underLeopard.
    1 the keypad is capricious. It changes the location of the cursor when I use certain keys, especially capitals. This happens all the time in Mail and Gmail.
    2 the trackpad is UNUSEABLE when connected to a projector. This happen often and i have to reboot to recover. A mouse works however.
    That is about all not much but these probelms did not exist on the old model. The eradict trackpad is annoying and the keyborad not working are both exteemely annoying.

  • Left direction Key not working on the keyboard

    i have an hp envy 15 laptop.Recently my left direction key on the keyboard has stopped working.the warranty got over this month.can the key be repaired? or is there a way to find out if there is a software glitch involved in this.
    and what will be the charges if it has to be repaired
    I am a resident of India

    First, can you share the specific model of Envy 15 that you have?  If you aren't sure how to find that check out (How do I find my product name/number?)
    You mentioned that the left direction key has stopped working, can you explain that a bit more?  Is it stuck down, does it just not respond to getting pressed, does it respond incorrectly?  Do you have windows 7 or Windows 8?
    I would probably start with Notebook Keyboard Troubleshooting (Windows 7), there is a section on Stuck keys that might help, and several sections on possible software glitches that might cause keyboard problems, take a look through those solutions and see if they help.
    Another options is to run the Keyboard test as described under Component Tests in Testing for Hardware Failures (Windows 7, Vista).  This will tell you for sure if the keyboard is functional or not.
    As to figuring out how much a repair from HP would cost, for that you will need to contact your local HP support team there in India, as repair costs will be detirmined by exactly what is wrong, as well as your specific location and product model.
    R
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • Delete Key Not Working on Bluetooth keyboard

    i just purchased an aftermarket Bluetooth keyboard recently and i only used it for about 2 hours and now the delete key won't work. what happened?

    It is a personal preference, but I always buy Apple products.  IMHO, the amount I might save on third party devices is not wither the trouble.
    Barry

  • '{' Key not working with Apple Keyboard in Windows & Visual Studio

    Good morning,
    I've been bugged by this forever now and tried it with Windows XP, Vista and 7 now on my macPro & (the latest version of) Bootcamp: I can type the { and } brackets just fine in most windows apps (e.g. start > run etc), but in visual studio, for some reason the 'ctrl + alt + 7' (for the '{') does result in the whole line being commented with // instead of the expected opening '{'. 'ctrl + alt + 0' ('}') does however work just fine.
    Now I am really not sure why this is happening, but it's the same for VS2008 and the VS2010 beta and developing in C# without a proper '{' combo is somewhat.. difficult
    Has anyone ever come across the same behavior and knows what to do?
    Cheers and thanks,
    -J

    Does it happen with another KB?
    If only this KB then the is either dirty or faulty. Maybe this will help
    http://theminiblog.co.uk/archives/2006/11/16/how-to-cleaning-the-apple-keyboard/

  • Media Keys Not Working - Apple Wireless Keyboard - Snow Leopard 10.6

    Hello, I am a new user to this Support Area and i tried calling but as its Christmas Day i cant get through because there closed so i decided to join here.
    Ok basically my problem is that i have a iMac and i recently installed Snow Leopard and on Christmas Day i got a Wireless Apple Keyboard i set it up all went well and got through all the bluetooth process fine except when i went to try use the Media Keys which are Brightness Up/Down, Volume Control, Play/Pause/FastForward and the other two don't know what there called tho when i press any of them they dont work when i press F12 which has a picture of Volume Up it goes to my Widgets thing and when i press F11 which is Volume Down it moves all the current apps out of the desktop like a clearing space function.
    I Really would like to have the Media Keys back to how there supposed to be i don't know why it is doing this but i think its Snow Leopard.I Have tried everything possible in System Prefs even removed the keyboard from the Bluetooth paired devices and re paired it but still nothing. It would be mostly appreciated if one you guys could help me soon..
    Thanks Sean

    Wow! I am in the exact same situation. I don't think it is Snow Leopard tho b/c when I plug my old keyboard back in the media keys work fine. It might have to do with the apple aluminum keyboard 2.0 update but when I try to download that it says my system is unable to support it (eben tho it only requires at least 10.5.8).
    If you find a solution let me know.

  • Bass Clef C key not working on midi keyboard

    The keyboard is a Novation Remote 37SL, this key doesn't work for any instrument that I select. All other keys work fine. I haven't had any problems like this before, but wonder if setting up my autoload yesterday might have led to this. Any suggestions would be welcomed, because I'm racking my brain here. Thanks.

    Does it happen with another KB?
    If only this KB then the is either dirty or faulty. Maybe this will help
    http://theminiblog.co.uk/archives/2006/11/16/how-to-cleaning-the-apple-keyboard/

Maybe you are looking for