1232 ag autonomous to LWAP upgrade and will it support with 5508 will work fine ?
Hi can anybody help me .
we have few sites with old 1232 ag AUTONOMOUS existing AP's , They are connected through 1 mbps link to main office .
Now we are planing to upgrade with WLC 5508 and few 1140 ap . but we want to use these same 1232ag ap on some sites.
So we need to upgrade it to LWAP .
1>Is it possible to upgrade this model of AP
2>Which is the ios i should download , is it avaliable in cisco site (as this ap is end of sale now )
3>can any body help me how the step to upgrade this autonomous ap
Just to add, the 1230's are not supported on the 7.2.x wlc code. You can however run the 7.0.x on the 5508 to support the 1230's. Also make sure you look at this link, because you might have to add the hash value to the wlc in order for them to join. It depends when the APs were manufactured.
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00806a426c.shtml
Sent from Cisco Technical Support iPhone App
Similar Messages
-
ITunes stops working and closes on opening with Match on, works fine with match off
iTunes stops working and closes upon opening with Match on, works fine with match off
I am having the very same problem with iTunes, I'm running Windows 7 64 bit and started having the problem after the latest update. I just upgraded to the new 5s and was syncing everything to it, so I figured that I would update my itunes software as well. Which I never do after updating one time and had trouble with it on my old laptop and had to rollback to a older version of itunes. I have tried every suggestion that has been posted in the Apple Discussion area and on other websites no luck what so ever. I figured I will wait till Apple comes out with another update and try again. In the post above I am having the exact problem with iTunes. I'd love to know what thef-ing problem is because this is extremely annoying!
-
I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
why does iTunes keep giving me bogus error messages. "Your internet connection is not working, check your connection and try again." My internet is working fine. iTunes is not working and will not allow me to download tunes.
This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013 -
I am trying to install Photoshop Elements on my new Windows 8 computer (I recently upgraded my windows 7 computer where Photoshop was working fine on before). It says the serial number is invalid. Do older versionsnot work on Windows8, or do I need to uninstall it from my old computer first?
You are allowed to have two activated installations. If you happened to have one on this Windows 8 machine before, it is possible that the activation used for it was never deactivated (did you deactivate it before you upgraded Windows?). Talk to Adobe support thru chat. They might be able to resolve this with you:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
my ipad air is not turning on, when I plug it in it doesn't even show that is charging and I tried several chargers they all work fine, its just when off and pitch black help!!!
If the battery is very low, it can take 15 minutes or maybe even longer befor you will see any response at all on the screen. If you have let the iPad charge for what you think is a sufficient length of time and it still hasn't shown any signs of life, try a reset and see if that will force it to start up.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo apperas on the screen and then let go of the buttons. If that still doesn't work, try charging the device again overnight. If it's still dean in the morning, try restoring the device with iTunes.
Use iTunes to restore your iOS device to factory settings - Apple Support
If that doesn't work, make an appointment at an Apple Store and seek their guidance. -
I do the same that is instructed in "If you have never synced your device with iTunes ".Everything works fine and itunes start restoring it and updating my ipad.But after 5 mints , same error again appears on itune screen.And also ipad goes into same disabled postion.What should i do ? Somebody help please.
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Some users have reported as many as 8 or 9 attempts were necessary before success.
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.
problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.
-
My Ipod was in my back pocket and when I took it out it has a white screen with 3 grey lines going threw it, and not even 5mins before, it was working fine... what could i be? it also isnt hooking up to itunes... please help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Will a TiBook with Tiger OS work with Airport Express?
Will a TiBook with Tiger OS work with Airport Express?
Use AirPort Utility 5.3.2 for Tiger. It will work with the current Express.
-
i keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help
I did get a "server busy" message when I loaded quicktime, but I'm not sure if it is related or not since I've been seeing that over the last couple of days, I can't remember if it came before iTunes stopped working or not. That message reads "This action cannot be completed because the other program is busy. Choose 'switch to' to activate the busy program and correct the problem." My options then are to choose switch to or retry. When I press "switch to" my Start menu opens, and nothing appears to happen when I select retry.
that's an odd sort of a message (or series of messages).
hmmmmm. let's try an experiment aimed at working out if there's a program interfering with the QuickTime (which is in turn causing grief with your iTunes).
try a selective startup using MSCONFIG, with just the itunes and QuickTime background processes enabled, as per the following document:
Using MSCONFIG to troubleshoot conflicts in Windows
does QT open without the strange message after the selective startup?
does iTunes launch properly? -
I have a MacBook Pro that will not charge.
The charger works fine as it will charge other MacBooks.
The computer has no power now so it is completely dead.
Any help is appreciated.Your appointment for an evaluation at the genius Bar is FREE, in warranty or out. Physical Problems like this is what they are best at.
-
wi-fi is gray will not connect since ios7.03, worked fine before this version...now slow, very slow, using nothing but 4g, no wi-fi no solution from apple store but to purchase a new Iphone....other 4s phone purchased at same time connects via wi-fi what gives?
Also reloaded per Apple instructions via web, Apple stores only solution "purchase a new phone", no attempt to fix problem.https://discussions.apple.com/thread/5554599?tstart=0
-
My ipad2 won't charge, it's been on 1% all day now. It's plugged in and keeps shutting off. The cord works fine, it's charging my husbands iPad. Any suggestions?
Is this with the power adaptor that was included with your iPad 2 purchase?
The same power adaptor and USB dock connector cable charges your husband's iPad?
If so, sounds like a hardware problem with the battery or something else. Have you tried powering the iPad off and on and/or a reset which is similar to a computer restart?
If so with no change, make an appointment at an Apple store if there is one nearby. -
I Have just downloaded the latest upgrade (through software update) and now my Mac Book Pro will not boot up !! how can I get out of this ?,
Try starting in safe mode:
Ciao.
Maybe you are looking for
-
I'm currently using a 13" Macbook Pro purchased in early 2011 and running on OSX Mavericks. I've been using the third party software Mackeeper for well over a year now and it's been great. I make good use of the encryption service that the app provid
-
Report quantity as blank or zero in the TO and keep it open for future pick
Hi Gurus, We have a scenario here an dneed your help: We haev a transfer order created fro a delivery for 4 items. The system is showing that we have stock. While went for picking the one material is not there physically. While trying to confirm the
-
Exchange 2007 configure didn't sync
We have 2 hub server and when I update the receive connector IP from Server A, if i login server B, I cannot see the update. I am going to reboot it. but I would like to know is it possible to check? because in the exchange console, it didnt have any
-
Hi gurus i need some help on working with business process desinger. if anybody has worked on defining the process using the Business Process Desinger, please guide me. regards vijaykumar
-
Why can't I find treesnap or download it from the apps web site
The apps website says the app is still available but I can't find it or download it