1240AG web administration - page error
i am attempting to copy over some QoS rules from a 1200 series AP to our new 1240AG AP. We use the cisco wireless phones in our warehouse and i am attempting to just set up the QoS rules that we currently have set in our 1200 series. So when i go to create the new policy on the create/edit option it allows to me to enter in the description "voice" and i set the classification on the vlan to latency 6. When i go to hit apply nothing happens and at the bottom of the IE or Firefox it says page error. On the 1200 series I can create/edit the policies but i cannot on the 1240AG. Am i doing something wrong? Is this a bug? Not sure what to do but it is driving me nuts. Thanks for your help.
If you know the applications used by wireless client devices, the applications' sensitivity to delay, and the amount of traffic associated with the applications, you can configure QoS to improve performance .
Similar Messages
-
Can't Access the web administration page
Hello,
I have a new Linksys router that I installed a few months ago. I am trying to connect my PS3 using wireless. the PS3 sees the access point SSID, but keeps failing to connect. I have double/triple check the WEP2 key and it is correct. I am also having problems accessing the web administration page. I keep getting page not found. I don't think that I have access the web administration page since I set it up. I can ping the router, so I know that its up, along with getting out to the Internet, I have used NMAP and scanned the router, but only 10080 is open (PS3) port. I assume that the default URL for the web administration page is http://192.168.1.1. There is no port needed to put in the URL is there? Also, since NMAP showed no ports open does that mean that the web server in the router is not listen? If so how do I connect without having to reset the router?
I do have some Cisco Linksys app that shows a GUI of my network, but no adminisration help.
Thanks,Who is your ISP..?
Are you able to go online on the wired computer...?
Make sure the computer is connected to the router on the Ethernet port and check the ip address first...Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then,Adjust the browser settings....Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
Now,try to open the setup page again... -
CUCM 8.6.2 Web Administration Page is being blocking occasionally
Hi Everyone:
I have a little problem with the administration page of the CUCM 8.6.2.20000-2. The web page (occasionally) go to blank page (in publisher or subscriber). The only thing that I can do to restablish the service is restart by SSH the service Cisco Tomcat.
The same thing happend when I am working and suddenly I press any link or access and the page go to blank. When this situation occur, the other functions are fine, the only problem is with the web page. I have tried with different browsers like IE, Mozilla, Chrome but the result is the same. I have checked the RTMT but I can not see anything wrong.
What can it happen? Any idea? Any advice?
I appreciate your help. Thanks.Hi there,
How often does this occur? There is an issue with Tomcat and CUCM 8.6 in regards to AXL requests:
CSCty36110 - CUCM 8.6 Tomcat OOM with "com.rsa.sslj.x.cu" suspect under high AXL Load
Description
Symptom:
Tomcat becomes unreachable or inaccessible after a number of days. So far the observed timeframe tends to be between 7 and 20 days.
If the generated hprof shows the main suspect as "com.rsa.sslj.x.cu" then this is most likely the cause.
Conditions:
This has been observed in environments where a very large number of AXL queries are done on the CUCM server.
Workaround:
Restart the Tomcat service on the CLI using "utils service restart Cisco Tomcat".
Prevent the external application from performing AXL queries. This is usually not a feasible workaround as AXL queries are a requirement for basic functionality of some applications.
HTH,
Chris -
Creation of Web Part page error in SharePoint subsite
Hi Friends,
When i was try to create webpart page( in out of the box)SharePoint Subside it throws error.
I checked logs i finally got error information like
System.ArgumentException: An entry with the same key already exists.
at System.ThrowHelper.ThrowArgumentException(ExceptionResource resource)
at System.Collections.Generic.SortedList`2.Add(TKey key, TValue value)
at ASP._layouts_spcf_aspx.__Render__control42(HtmlTextWriter __w, Control parameterContainer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at ASP._controltemplates_inputformcontrol_ascx.__Render__control1(HtmlTextWriter __w, Control parameterContainer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at ASP._controltemplates_inputformsection_ascx.__Render__control1(HtmlTextWriter __w, Control parameterContainer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at ASP._layouts_spcf_aspx.__Render__control17(HtmlTextWriter __w, Control parameterContainer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer)
at System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output)
at System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at Microsoft.SharePoint.WebControls.UnsecuredLayoutsPageBase.RenderChildren(HtmlTextWriter writer)
at System.Web.UI.Page.Render(HtmlTextWriter writer)
at Microsoft.SharePoint.WebControls.UnsecuredLayoutsPageBase.Render(HtmlTextWriter writer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
This issue i faced only in Sub site of the site collection.
i am able to create to web part page in Root site and other sub sites in same site collection.
This is challenging issue in SharePoint 2010 .
Help me.
BadriHi Badri,
Are you using any custom master page ?
Which template you used to create sub site ?
Let us know your results, thanks
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful. -
Administrator Page error(java)
Hi , I installed Coldfusion MX but I got this error on my
Administrator Page(when loaded).
java.lang.NoClassDefFoundError
at javax.crypto.Cipher.getInstance([DashoPro-V1.2-120198])
at coldfusion.compiler.TemplateReader.decrypt(Unknown
Source)
at coldfusion.compiler.TemplateReader.(Unknown Source)
etc....
I already have
Java Plugin Installed on my PC.
probably this is about java issue thing... what other java
things do i need to install and or what other things to configure
on my PC ? also my pc has fresh windows xp intalled and coldfusion
mx....
pls let me know on how can I fix this ?
any advaice... tnxThere is a possible solution in this
previous
thread. -
Open bam administrator page error
page display:
ADC System Type Not Found (SysIterUser)
Source: "ActiveDataCache" ID: "ADCSystemTypeNotFound"
Oracle.BAM.ActiveDataCache.SystemTypeNotFoundException: ADC System Type Not Found (SysIterUser)
at Oracle.BAM.ActiveDataCache.SystemType.LoadSchema(Boolean bCache)
at Oracle.BAM.ActiveDataCache.SystemType..ctor(Context ctxAdcContext, String strSystemTypeName)
at Oracle.BAM.Administrator.ManageLogins.NavigatorInit()
before open web page,i executed the command "adcperfmonsetup /remove;adcperfmonsetup"Please reinstall. It appears that BAM schema wasn't created properly. Please provide BAM release number, DB version, and OS details if reinstall doesn't work.
-
HP 8600 web configuration page -- run browser as administrator?
Setup for my new HP 8600 Pro Plus went flawlessly, including eprint, apps etc -- except for the fact that I couldn't access the web configuration page. I tried on three different computers with different browsers, and no luck. When I tried to access the 192.168.1.xxx address, nothing would happen, it would just eventually time out on a blank page. No error message.
As a last stab in the dark I decided to try starting IE as admin (i.e. right click in Win7 -> "run as administrator"), and that solved the problem. Has anyone any idea why this should be? Is it a setting in the 8600 configuration that I can change?
I also have an older HP printer (HP 2300dn) and I can access that printer's configuration page without running the browser as administrator.
Computers: Win 7 x64, Win XP x86Hi there johnk22,
This is quite odd. To eliminate any software issues on the computer side try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on. Additionally could you tell us what version of IE you are using? I suspect that this may be partly due to security settings.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Calculation Services 2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context. at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528) 0x5C08 Excel Services
Excel Web Access 6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context. at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local() --- End of inner exception stack trace --- at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings() at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList() at Microsoft.Office...
2.the event in event viewer is:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2014/10/10 9:49:43
Event ID: 4625
Task Category: Logon
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ***.net
Description:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: ***
Account Domain: ***
Failure Information:
Failure Reason: An Error occured during Logon.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port: 63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
<EventID>4625</EventID>
<Version>0</Version>
<Level>0</Level>
<Task>12544</Task>
<Opcode>0</Opcode>
<Keywords>0x8010000000000000</Keywords>
<TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
<EventRecordID>37602685</EventRecordID>
<Correlation />
<Execution ProcessID="532" ThreadID="26096" />
<Channel>Security</Channel>
<Computer>***.net</Computer>
<Security />
</System>
<EventData>
<Data Name="SubjectUserSid">S-1-0-0</Data>
<Data Name="SubjectUserName">-</Data>
<Data Name="SubjectDomainName">-</Data>
<Data Name="SubjectLogonId">0x0</Data>
<Data Name="TargetUserSid">S-1-0-0</Data>
<Data Name="TargetUserName">***</Data>
<Data Name="TargetDomainName">***</Data>
<Data Name="Status">0xc000006d</Data>
<Data Name="FailureReason">%%2304</Data>
<Data Name="SubStatus">0x0</Data>
<Data Name="LogonType">3</Data>
<Data Name="LogonProcessName">
</Data>
<Data Name="AuthenticationPackageName">NTLM</Data>
<Data Name="WorkstationName">***</Data>
<Data Name="TransmittedServices">-</Data>
<Data Name="LmPackageName">-</Data>
<Data Name="KeyLength">0</Data>
<Data Name="ProcessId">0x0</Data>
<Data Name="ProcessName">-</Data>
<Data Name="IpAddress">***</Data>
<Data Name="IpPort">63664</Data>
</EventData>
</Event>Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support -
Here is a ticket regarding our current client web application ( Image data add, edit , delete in folder with form data in MSSQL Database) that using code c#, web form, ajax, VS2008, MSSQL Server2008 , it appears that there is an error where the HTTP
503 error occurs.
. Below is a conversation with Host Server support assistant.Can you take a look at it?
Ben (support) - Hi
Customer - We're having an issue with our windows host
Ben (support) - What's the issue?
Customer - 503 errors
Ben (support) - I am not getting any 503 errors on your site, is there a specific url to duplicate the error?
Customer - no, it comes and goes without any change Customer - could you have access to any logs ?
Ben (support) - Error logs are only available on Linux shared hosting, however with this error it may be related to you reaching your concurrent connections
Ben (support) - You can review more about this at the link \
Customer - probably yes - how can we troubleshoot ?
Ben (support) - http://support.godaddy.com/help/article/3206/how-many-visitors-can-view-my-site-at-once
Ben (support) - This is something you need to review your code and databases to make sure they are closing the connections in a timely manner
Customer - we're low traffic, this is an image DB to show our product details to our customers
Customer - ahhhh, so we could have straying sessions ?
Ben (support) - Correct Customer - any way you could check if it's the case ?
Customer - because it was working previously
Ben (support) - We already know that's the case as you stated the 503 errors don't happen all the time if it were issue on the server the the 503 would stay.
Customer - so our 2/3 max concurrent users can max out the 200 sessions
Customer - correct ?
Customer - is there a timeout ?
Ben (support) - no that's not a time out concurrent connections are a little different then sessions and or connections. Lets say for an example you have 5 images on your site and 5 7 users come to your site this is not 7 concurrent connections but 35. They
do close after awhile hence why the 503 error comes and goes. You can have these connections close sooner using code but this is something you have to research using your favorite search engine
Customer - thank you so much
Customer - I'm surprised that this just started a few weeks ago when we haven't changed anything for months
Customer - any changes from your side ? lowering of the value maybe ?
Customer - I'm trying to understand what I can report as a significant change
Ben (support) - We haven't touched that limit in years
Ben (support) - This could just be more users to your site than normal or even more images
Customer - I was thinking that could be it indeed
Customer - so I need to research how to quickly close connections when not needed
Ben (support) - Correctly
Ben (support) - correct
Customer - thanks !!
Ben (support) - Your welcome
Analysis :
The link provided tells us : All Plesk accounts are limited to 200 simultaneous visitors.
From what Ben (support) says and a little extra research, if those aren't visitors but connections then it's quite easy to max out, especially if the connections aren't closed when finished using. I'd suggest forwarding this to Kasem to see what he thinks.
Cheers,
CustomerHi Md,
Thank you for posting in the MSDN forum.
>>
I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded.
Since
Visual Studio General Forum which discuss VS IDE issue, I am afraid that you post the issue in an incorrect forum.
To help you find the correct forum, would you mind letting us know more information about this issue? Which kind of web app you develop using C# language? Is it an ASP.NET Web Application?
If yes, I suggest you could post the issue directly on
ASP.NET forum, it would better support your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
BPC 7.5 Web Administration / Set App Params asks for AntiXSSLib 1.5
Hi. We have now installed BPC 7.5 in our test environment, but are facing a problem.
According to the installation guide, we have installed Microsoft AntiCross Site Scripting Library 3.0 on our app/web-servers.
But when trying to enter "Set Application Parameters" in the Web Administration tool, we get an error quite not expected:
Any ideas of why it asks for v1.5, which were used by BPC 5.1?
Server Error in '/OSoft' Application.
Could not load file or assembly 'AntiXssLibrary, Version=1.5.0.0, Culture=neutral, PublicKeyToken=bcdc0d0c766dd6e4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileLoadException: Could not load file or assembly 'AntiXssLibrary, Version=1.5.0.0, Culture=neutral, PublicKeyToken=bcdc0d0c766dd6e4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'AntiXssLibrary, Version=1.5.0.0, Culture=neutral, PublicKeyToken=bcdc0d0c766dd6e4' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Stack Trace:
[FileLoadException: Could not load file or assembly 'AntiXssLibrary, Version=1.5.0.0, Culture=neutral, PublicKeyToken=bcdc0d0c766dd6e4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
OSoft.SetAppParameters.GetList() +0
OSoft.SetAppParameters.Page_Load(Object sender, EventArgs e) +725
System.EventHandler.Invoke(Object sender, EventArgs e) +0
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +50
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3053
Edited by: Malin Westlund on May 5, 2010 9:23 AMHi Malin,
You are having a problem with you AntiSssLibrary.dll. Either it is not installed correctly or it is corrupted or in the wrong version.
You can take the following steps to ensure that you have a fully functional version of the Microsoft Anti-Cross Site Scripting Library:
1) Download the Microsoft Anti-Cross Site Scripting Library V1.5 from http://www.microsoft.com/downloads/details.aspx?FamilyId=EFB9C819-53FF-4F82-BFAF-E11625130C25&displaylang=en
2) Uninstall the current version of Microsoft Anti-Cross Site Scripting Library and remove any AntiXssLibrary.dll file from your server;
3) Install the version that you have downloaded from the MS website;
4) Copy the AntiXssLibrary.dll file from C:\Program Files\Microsoft Corporation\Anti-Cross Site Scripting Library V1.5\Library\.NET 1.1\ (Make sure that you're copying from the .NET 1.1 folder, not 2.0);
5) Paste it under your \BPC\Websrvr\Web\bin folder and restart IIS.
Best regards,
Rodrigo -
No Start Page
Could not display this Web Site as no Start Page has been configured. To configure a default starting page, set one of your Web Pages to be the Start Page. Please contact your Administrator for more information."
Not sure why this is happening. dallaseasterrun.comHi Paul,
It appears you've managed to address this issue - I'm not encountering a "No Start Page" error when navigating to your site.
Cheers. -
I have a custom SharePoint 2010 solution that includes an aspx page. The aspx page in is in the /layouts folder within the solution and I created it by just adding an application page to the solution. I am trying to create a parent-child relationship between
two different lists in SharePoint. From the parent I have a custom button on the ribbon that creates a child item with the ID of the parent stamped on it.
The page is just a processing page that forwards on parameters from the parent to the new child item. (i.e. the ID value)
The code generated when I add the aspx page is below:
<%@ Assembly Name="$SharePoint.Project.AssemblyFullName$" %>
<%@ Import Namespace="Microsoft.SharePoint.ApplicationPages" %>
<%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="Utilities" Namespace="Microsoft.SharePoint.Utilities" Assembly="Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="asp" Namespace="System.Web.UI" Assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" %>
<%@ Import Namespace="Microsoft.SharePoint" %>
<%@ Assembly Name="Microsoft.Web.CommandUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="processingpage.aspx.cs" Inherits="MY.Solution.Layouts.MY.Solution.processingpage" MasterPageFile="~/_layouts/application.master" %>
<asp:Content ID="PageHead" ContentPlaceHolderID="PlaceHolderAdditionalPageHead" runat="server">
</asp:Content>
<asp:Content ID="Main" ContentPlaceHolderID="PlaceHolderMain" runat="server">
</asp:Content>
<asp:Content ID="PageTitle" ContentPlaceHolderID="PlaceHolderPageTitle" runat="server"> Processing Page </asp:Content>
<asp:Content ID="PageTitleInTitleArea" ContentPlaceHolderID="PlaceHolderPageTitleInTitleArea" runat="server" > Processing Page </asp:Content>
The code behind is as follows:
using System;
using Microsoft.SharePoint;
using Microsoft.SharePoint.Administration;
using Microsoft.SharePoint.WebControls;
using Microsoft.SharePoint.Utilities;
using System.Reflection;
namespace MY.Solution.Layouts.MY.Solution
public partial class processingpage : LayoutsPageBase
protected void Page_Load(object sender, EventArgs e)
try
//Get a reference to the SPWeb object
SPWeb oWeb = SPContext.Current.Web;
//Use the Parameters That Are Passed In
SPList thisList = oWeb.Lists[new Guid(Request.QueryString["List"])];
SPListItem thisItem = thisList.GetItemById(int.Parse(Request.QueryString["ID"]));
sContentType = thisItem["ContentType"].ToString();
sContentTypeID = thisItem.ContentTypeId.ToString();
if (sContentType == "Some Content Type")
sContentTypeID = "";
sAIID = thisItem["ID"].ToString();
//Redirect to newform.aspx with the Appropriate parameters.
Context.Response.Redirect(oWeb.Url + "/Lists/Blist" + "/NewForm.aspx?AIID=" + sAIAuditID.ToString() + "&ContentTypeId=" + sContentTypeID + "&ParentItemID" + Context.Request["ID"]);
else if (sContentType == "Some Content Type")
sContentTypeID = "";
sAIID = thisItem["AIID"].ToString();
//Redirect to newform.aspx with the Appropriate parameters.
Context.Response.Redirect(oWeb.Url + "/Lists/AList" + "/NewForm.aspx?AIID=" + sAIID.ToString() + "&ContentTypeId=" + sContentTypeID + "&ParentItemID" + Context.Request["ID"]);
else if (sContentType == "Some Content Type")
sContentTypeID = "";
sAICID = thisItem["AICID"].ToString();
//Redirect to newform.aspx with the Appropriate parameters.
Context.Response.Redirect(oWeb.Url + "/Lists/CList" + "/NewForm.aspx?AICID=" + sAICID.ToString() + "&ContentTypeId=" + sContentTypeID + "&ParentItemID" + Context.Request["ID"]);
else
LoggingService.LogError("MY.Solution - Processing Page", "No Applicable Content Type Found.");
catch (Exception ex)
LoggingService.LogError("My.Solution - Processing Page", ex.Message);
finally
//DO SOME FINAL THINGS HERE WHEN REQUIRED.
In the page I need to use Request.QueryString to get the values from the URL. But when I deploy the solution and load the page I get the error:
'MY.Solution.Layouts.MY.Solution.processingpage' is not allowed here because it does not extend class 'System.Web.UI.Page'.
When I change the line:
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="processingpage.aspx.cs" Inherits="MY.Solution.Layouts.MY.Solution.processingpage" MasterPageFile="~/_layouts/application.master" %>
to inherit as follows:
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="processingpage.aspx.cs" Inherits="Microsoft.SharePoint.WebControls.LayoutsPageBase" MasterPageFile="~/_layouts/application.master" %>
it does not work either.
If I change it to inherit like below:
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="processingpage.aspx.cs" Inherits="System.Web.UI.Page" MasterPageFile="~/_layouts/application.master" %>
it also does not work.
What does this error actually mean? And why doesn't the default code generated by Visual Studio work?@NadeemYousuf I have tried this too and it didn't work.
What does the error even mean? And why does the error appear with default Visual Studio code? In my example I have just added a basic application page with no other code in it and it still does not work. -
BEx Web Application Unknown Error in EP
Hi ,
When opening a BEx report from Portal 7.0, getting the error.How to resolve.
BEx Web Application
Unknown Error
Exception occured while processing the current request; this exception cannot be handled by the application or framework
Log ID: C00099589C2F31A00000000200001A75
Failed to process request; contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page
We are sorry for the inconvenience
Thanks a tonHi Daniel,
We can check the FPN using remote role assignment.
1. Open you EP (Consumer)
2. Go to User Administration
3. In Search Criteria, select Role in the first field, in second field select "system alias of your producer" and put * in last filed
4. Click Go
You should get all the roles of your producer on your consumer. This functionality is used for Remote Role assignment.
This is simplest way to check whether FPN is working fine or not.
Waiting for results
Dbalhara -
People Picker in Central Administration on change Site Collection Administrator page.
Hi there
We are coming to the end of our rope here.
We have a problem where the people picker is not working in Central Administration, particularly the change Site Collection administrator page. It simply does nothing but hang the page, it doesn't even give the red squigglies. The search dialogue boxes also
hangs. It works in other parts of Central Administration.
The environment has 2 domains with one way trust between them and the peoplepicker-searchadforest attribute is set.
Any suggestions?Hi Chad,
Did this issue only happen to the "_admin/owners.aspx" page for your Central Administration site?
Please compare the peoplepicker-searchadforest attribute for your Central Administration web applicaiton with other working web application, see if they are the same ( iisreset may need for your Central Administration ).
Also check
ULS log for more related error message (also try others may like "developer dashboard","fiddler", ect.) recoreded when this issue occurs.
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
FDM crashed after trying to open locations and mappings. Login page error
Whilst trying to open mappings for a given location, FDM has crashed. We have restarted the FDM service, however despite the service running cannot log into FDM any more. Internet Explorer now displays the following error:
Internet Explorer:
"Application Error
Description: An exception occurred during the execution of the current web request. Please contact the administrator to review the stack trace in the event log for more information about the error.
Source:
http://ibm-pr-mihdca-01.yodel.net/HyperionFDM/AuthorizedPages/LogonPage.aspx?ReturnUrl=/HyperionFDM/default.aspx"
Event Viewer Application Logs:
Exception Details:
Retrieving the COM class factory for component with CLSID {00000535-0000-0010-8000-00AA006D2EA4} failed due to the following error: 800703fa.
Stack Trace:
at Hyperion.FDM.Classes.LanguageTranslator.LookupPreferredLanguageId(ArrayList listLanguages)
at Hyperion.FDM.Pages.BasePage.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at Hyperion.FDM.Classes.LanguageTranslator.LookupPreferredLanguageId(ArrayList listLanguages)
at Hyperion.FDM.Pages.BasePage.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I have seen potential solutions at the following links, suggesting potential invalid reserved characters (such as &) in the mappings previous uploaded. We will look at trying to remove these rows via a SQL script, however we do not have any visibility at this stage and will require assistance from the DBA's.
Error @ Deleting the existing FDM Account mappings.
FDQM Mapping error
Can anyone please suggest which tables we need to be looking at/guiding the DBA's too? Or even better, can anyone please provide a script? Or could this be a red herring, since the FDM login page is not even loading?Thanks for your response. Yes the exact same solution has worked for us too. FDM crashed last night, which was apparently caused by the flash recovery drive becoming full. This caused the Oracle RDBMS to freeze. After this was re-sized, we then had to restart the Hyperion services this morning. Everything then appeared to be fine, until the above errors occurred. A full reboot has since resolved the FDM issue, but we suspect an IIS restart might have been the answer.
If the same issue occurs again I will update this thread with more info!
Maybe you are looking for
-
Safari is running very slow in OS X mavericks. Our network is using proxy authentication. Earlier we do not have any problem with safari. Please let us know how to fix the bug.
-
Calling Dialog from a dialog- size constraints
Hi, I am using Jdev version 11.1.1.7.1. I am calling a taskflow and running it as a dialog. I have a requirement to call another taskflow which runs as dialog from this dialog. When I do so, my child dialog is restricted within the parent dialog spac
-
The disk space disappears after bootcamp failed in deleting the windows partition.
Hardware: Macbook Pro 700 OS: Lion v10.7 1. I installed Windows 7 in my mac. The space of Windows partition is 80G. 2. Some dlls of Windows will always disappear and at last the Windows cannot be started successfully. 3. Yesterday I updated Lion and
-
Transaction for this user exit
Hi how can i find out to which transaction user exit SDVAX001 belongs?
-
I am trying to use a WVC2300 to record images for a time-lapse video. The camera works fine, but I can't figure out a way to set it to take a snapshot at an interval (5 minutes) and send it to an FTP folder. The Events settings page has the options t