125% display setting moves status area

Unfortunately, I'm having to set my Windows display to 125% to make text more easily read. Age sucks. I've finally discovered that this is what is causing the status area at the bottom right to be mostly off-screen to the right. Mind you, it's not that the edge of the Premiere window that is off screen - it's not. I can only see the first few letters of any conforming action going on - the yellow conforming bar is totally off screen. Happens no matter if the Premiere window is Maximized or Restored Down. I can set the display back to 100% the status area is displayed correctly, but I'd really like to use 125%.
I've filed a Bug Report, but just wanted to see if anyone else can confirm that this is happening with other GPU's.

Are you sure you have ..
<HEADER_ATTACHMENTS>
<LONG_TEXT>long text 1</LONG_TEXT>
<LONG_TEXT>Long text 2</LONG_TEXT>
</HEADER_ATTACHMENTS>Not like this..
<HEADER_ATTACHMENTS>
<LONG_TEXT>long text 1</LONG_TEXT>
</HEADER_ATTACHMENTS>
<HEADER_ATTACHMENTS>
<LONG_TEXT>Long text 2</LONG_TEXT>
</HEADER_ATTACHMENTS>I tried ..
<?for-each:/PO_DATA/HEADER_ATTACHMENTS?>
<?LONG_TEXT?>
<?end for-each?>
I got the output as..long text 1
HTH..

Similar Messages

In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer? Are the presenter display setting saved in the file?

In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer?
Are the presenter display setting saved in the file?
Thanks for your help!

it wont.
Presenter note display is set per machine.
Surprising nobody in this community knew this.

Time stamps in reports and status are 7hrs off, is there a setting?

Time stamps in reports and status are 7hrs off, is there a regional setting to correct this?
When I run e-load all reports and any other time stamps are 7 hours off. (If I run a test at 9:20am pacific time the e-load shows 4:20pm). The e-test scripts show the correct time if I run those via e-test.
Is there a setting for this?
Thanks!

Hi hagstal,
Actually, this is a known issue on Vista.
You need to edit the follwoing file to specify your timezone;
\Empirix\EmpAppServer\bin\JbossService.conf
Please refer to Known Problems section of e-TEST suite Release Notes for more details.
regards

When downloading application updates, which are over a GB, my MacBook Air keeps logging me out and I have to start the download over. I have the power settings set to never turn off, and the display set to never go to screen saver.

When downloading application updates, which are over a GB, my MacBook Air keeps logging me out and I have to start the download over. I have the power settings set to never turn off, and the display set to never go to screen saver. Any suggestions?

I have the exact same problem/situation since a few days
I have not intalled a program lately.
Any progress Voratima??
Software Mac OS X Lion 10.7.5 (11G63)

Form display based on Goods movement status

Hi all,
Delivery note should be printed only when VBUK-WBSTK (Total Goods movement status) is equal to C (Completely processed). Can this be done in a Smartform? If so how?

Hi,
Check the condition in driver program before calling the smartform.So that it will call the smartform based on condition.
Thanks,
suma.

Set pf status in alv oops concept

Hi all,
can any one pls tell me by using which method or class i can set the
pf status......?
regards
cnu

Fast and Easy way
As you are using OO ALV, remove any function not needed from the ALV via parameter IT_TOOLBAR_EXCLUDING of method set_table_for_first_display and put your own function in the menu of your dynpro PBO via SET PF-STATUS.
Nethertheless you can use a more complew way using :
Changing Standard Functions
Purpose
The standard functions are not designed for specific applications. As a result, special knowledge of the data displayed cannot be considered. In individual cases, you may design a standard function - such as sorting by a specific column - more effectively in a specific application.
Process Flow
1. Define an event handler method for event before_user_command [Page 108]. This event is triggered after the user has selected a function. This means that the ALV Grid Control passes control to the application before the function is executed. Using event parameter I_UCOMM you can restrict the function code to the function you want to modify.
2. Implement your own algorithm for the function within the event handler method. In this context, you can call methods of the ALV Grid Control.
3. Reset the function code to ensure that the standard function is no longer executed:
CALL METHOD <Instance of the ALV Ccntrol>->set_user_command exporting I_UCOMM = SPACE.
If you never need specific functions of the tool bar, you can hide them for the entire life-cycle of the control. To do this, you use parameter IT_TOOLBAR_EXCLUDING of method set_table_for_first_display to pass a table that contains the function codes to be hidden.
Defining GUI Elements in the Toolbar
Process Flow
1. Define an event handler method for event TOOLBAR.
2. Declare a structure for defining a toolbar element:
data: ls_toolbar TYPE stb_button.
3. For a pushbutton, for example, you would fill the following fields:
CLEAR ls_toolbar. MOVE 0 TO ls_toolbar-butn_type.
MOVE 'BOOKINGS' TO ls_toolbar-function.
MOVE icon_employee TO ls_toolbar-icon.
MOVE 'Show Bookings'(111) TO ls_toolbar-quickinfo. MOVE SPACE TO ls_toolbar-disabled.
In the butn_type field, you specify the type of the GUI element for the ALV Grid Control. For possible values, see the value range of domain TB_BTYPE.
4. Use event parameter E_OBJECT to append the new definition to table mt_toolbar:
APPEND ls_toolbar TO e_object->mt_toolbar.
5. If you want to define additional elements, go back to step 3.
6. Call method set_toolbar_interactive, if you want to rebuild the toolbar.
Result
In the event handler method of event USER_COMMAND, you can query the function code you specified in field function to implement the associated function.
See also report BCALV_GRID_05 in development class SLIS.
Look at this documentation too : <a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf">ALV Gird Control (BC-SRV-ALV)</a>
Regards

Reader 10.1 issues - with 150% Display setting

I've waited a long time for the latest version of Reader (10.1.0.534) which came out yesterday. I keenly updated to it today and went testing (with my fingers crossed), only to find that it still doesn't fix the issues I'm encountering with my PCs Display set to 150% (Win 7 SP1 x64) - all the issues are all still there.
Firstly - when using under the latest IE9 I've noticed the following:
The top toolbar won't work and clicking on any button has no effect
The bottom (floating) toolbar is similarly ineffective
Somehow after I found 2 above, I've managed to loose the bottom floating toolbar altogether (and alt-F8 or F8 wont bring it back - not that its vital)
Right Clicking on the screen brings up an option panel away from the mouse
When used as a standalone app (again at 150% Display setting in Win 7) I've noticed:
The illumination of the Close, Maximise and Minimise buttons when the mouse is rolled over them is irregular and if the mouse becomes stationary on any of those buttons, the illumination goes.
Setting Display to 100% (or even 125% from provisional testing) seems to elliminate these bugs but is Adobe going to buy me some binoculars so I can see the tiny buttons and fonts on my HTPC screen from 6' away...
In this day and age of Windows coming with a perfectly capable Media Centre interface, many users of HTPCs have them set up with high resolution monitors (or TVs as the monitor) and leaving the display set to 100% is no good for regular PC functions (such as web browsing or pdf reading).
Please fix this Adobe. I've already applied to be a pre-release tester (and my application hasn't been picked up/followed up). I just feel I'm getting my moneys worth out of this product!

Hi..
Try removing a plugin...
Quit Safari.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
/Library/Internet Plug-Ins
Move the Adobe PDF Browser plugin (or just PDF Browser plugin) from the Internet Plug-Ins folder to the Trash.
Relaunch Safari to test.

Where will i use SET-PF-STATUS?

HOW TO CREATE MENUBAR,TITILE BAR,APPLICATION? IN MY PROGRAM BELOW.......
REPORT YINTERACTIVEPROGRAM02 NO STANDARD PAGE HEADING.
TABLES:YEMPLOYEE,YEMPLOYEEDB.
TYPES: BEGIN OF TY_EMPLOYEE,
 EMP_ID TYPE YEMPLOYEE-EMP_ID,
 EMP_NAME TYPE YEMPLOYEE-EMP_NAME,
 EMP_ADDR TYPE YEMPLOYEE-EMP_ADDR,
 EMP_PROFILE TYPE YEMPLOYEE-EMP_PROFILE,
 END OF TY_EMPLOYEE.
DATA:I_EMPLOYEE TYPE STANDARD TABLE OF TY_EMPLOYEE WITH HEADER LINE.
START-OF-SELECTION.
SELECT * FROM YEMPLOYEE INTO CORRESPONDING FIELDS OF TABLE I_EMPLOYEE.
LOOP AT i_EMPLOYEE.
 WRITE: I_EMPLOYEE-EMP_ID,' ',
 I_EMPLOYEE-EMP_NAME,' ',
 I_EMPLOYEE-EMP_ADDR,' ',
 I_EMPLOYEE-EMP_PROFILE.
 HIDE:I_EMPLOYEE-EMP_ID.
 SKIP.
ENDLOOP.
TOP-OF-PAGE.
WRITE: 'PRODUCT INFORMATION'.
SKIP.
WRITE: 'EMPLOYEE ID ',
 'EMPLOYEE NAME ',
 'EMPLOYEE ADDR ',
 'EMPLOYEE PROFILE'.
ULINE.
END-OF-PAGE.
WRITE: 'ENJOY'.
END-OF-SELECTION.
AT LINE-SELECTION.
CHECK SY-LSIND = 1.
WINDOW STARTING AT 10 5
 ENDING AT 99 12.
WRITE: 'YOU HAVE SELECTED ITEM:'.
ULINE.
WRITE: 'EMPLOYEE ID ',
 'EMPLOYEE NAME ',
 'EMPLOYEE ADDR ',
 'EMPLOYEE PROFILE'.
ULINE.
SKIP.
WRITE:SY-LISEL.
ULINE.
SELECT * FROM YEMPLOYEEDB WHERE EMP_ID = I_EMPLOYEE-EMP_ID.
 WRITE:'EMP_AGE '.
 WRITE:'EMP_GENDER'.
 SKIP.
 WRITE:YEMPLOYEEDB-EMP_AGE.
 WRITE:' '.
 WRITE:YEMPLOYEEDB-EMP_GENDER.
ENDSELECT.
IF SY-SUBRC <> 0.
 WRITE: 'NO DATA FOR SELECTED ITEM'.
ENDIF.

Hi,
Sets a GUI (Graphical User Interface) status pfstat which can be up to 20 characters long. There are many of these statuses in the GUI of a program. Each one describes which functions are available and how you can select these via menus and menu bars or by pressing function keys or pushbuttons. For further information about this, refer to the Menu Painter documentation.
Each status has a name which may be up to 8 characters long.
Setting a status makes the functions contained therein selectable.
This method allows you to vary the available functions according to the current screen, list level and/or previous program flow.
The current status is stored in the system field SY-PFKEY.
A status remains valid for the duration of a transaction or until you set a new status.
Note
You can use a namespace prefix with status names.
Example
Event in program:
START-OF-SELECTION.
SET PF-STATUS 'MAIN'.
WRITE SY-PFKEY.
AT USER-COMMAND.
CASE SY-UCOMM.
 WHEN 'F001'.
 SET PF-STATUS '0001'.
 WRITE SY-PFKEY.
ENDCASE.
Produces a list (contents MAIN) with a GUI framework which allows you to select functions assigned to the the status MAIN. If you choose the function code F001 (e.g. from the menu or by pressing a pushbutton), you trigger the event AT USER-COMMAND. This generates a secondary list (contents 0001) with a GUI framework which allows you to select functions assigned to the status 0001. On returning from the secondary list to the basic list the status MAIN is reactivated.
Example
PBO module:
MODULE PBO_100 OUTPUT.
SET PF-STATUS 'S001'.
ENDMODULE.
Displays the screen 100 with a GUI framework which allows you to select functions assigned to the status S001.
Note
If you want to set a status for a screen, you must do so during the PBO event. The system always searches for the status pfstat in the GUI of the main program of the current program group . (However, see also the addition OF PROGRAM progname.)
Example
PROGRAM PROGRAM1.
PERFORM UP1 IN PROGRAM PROGRAM2.
PROGRAM PROGRAM2.
FORM UP1.
SET PF-STATUS 'ABCD'
ENDFORM:
The status ABCD of program PROGRAM1 is activated if PROGRAM1 is the program specified in the transaction definition.
Notes
If no GUI is defined in the list processing (or it is deactivated with SET PF-STATUS SPACE), the system supplies a standard user interface.
This statement converts the contents of the field pfstat to type C. The converted value is used to search for the desired status. Since the conversion employs the standard conversion rules as for MOVE, you should use a field of type C for pfstat to avoid unwanted conversions. In this case, a field of type I with a value of 12 would give the key ' 12 '.
Addition 1
... EXCLUDING f ... EXCLUDING itab
Effect
Deactivates one or more of the status functions, so that they cannot be selected. Specify the appropriate function codes using one of the following:
a field f or a literal which contains a function code
an internal table itab which contains several function codes
This method allows you to modify the selectable functions of a status easily at runtime.
Example
DATA: itab TYPE TABLE OF sy-ucomm.
APPEND 'DELE' TO itab.
APPEND 'PICK' TO itab.
SET PF-STATUS 'STA3' EXCLUDING itab.
Sets the status STA3 which renders the functions with the function codes DELE and PICK inactive.
Addition 2
... IMMEDIATELY
Effect
List processing: The status becomes effective for the last list displayed and is not flagged for the next secondary list. In screen processing, this addition has no effect because every status becomes immediately effective anyway.
Example
Event in program:
START-OF-SELECTION.
SET PF-STATUS 'MAIN'.
WRITE SY-PFKEY.
AT USER-COMMAND.
CASE SY-UCOMM.
 WHEN 'F002'.
 SET PF-STATUS '0002' IMMEDIATELY.
 EXIT.
ENDCASE.
Selecting the function F002 in the basic list (contents MAIN, status MAIN) redisplays the basic list, but this time with the status 0002.
Note
Without the addition ... IMMEDIATELY, the old status MAIN becomes active again.
Addition 3
... OF PROGRAM progname
Effect
The system does not look for the status pfstat in the GUI of the main program of the current program group, but in the program whose name is specified in the field progname.
Note
Only use this addition if the status contains no dynamic texts.
Since the system searches for the texts in the program to which the status belongs (that is, in program progname) the calling program will not be able to fill the dynamic texts. External statuses containing dynamic texts should be assigned to a function group, and activated by a function module that both fills the dynamic text fields and sets the status.
Example
DATA PROGR LIKE SY-REPID.
MOVE 'TESTPROG' TO PROG.
SET PF-STATUS 'ABCD' OF PROGRAM PROG.
The system activates the status ABCD of program TESTPROG.
Note
You can use the OF PROGRAM addition in conjunction with the EXCLUDING itab and IMMEDIATLEY additions.
Regards,
PRitha.
Reward if helpful

How do I ONLY show movies that are downloaded on my devices ?

On my iPad I want to only display the movies they can watch without being connected to a network, the ones I have downloaded to that device, is this a setting option?

You can also go to Settings>iTunes and App Store>Show all>Videos>Off. That will remove the movies that you have in iCloud, but that are not actually on the iPad, from the videos app.
You can turn off music in that setting as well, if you like.

The boxes representing my screen displays in arrangement tab are missing

Hey guys, the blue boxes that represent the two displays that i have are missing in the arrangement tab. my computer will not let me move my cusor between the monitors, but i still see my desktop backround. and if I turn on mirroring it works fine. anyone know how to fix this? thanks

Click "View" in the Menu Bar at the top of your Firefox window, if there is no check mark next to "Status Bar", click on "Status Bar" to place a check mark. Did that solve your problem?
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''

My apple tv main menu no longer displays the "movies" section, just internet, computers, and settings. Does anyone know why or how to get it back up? Recently rented a movie directly through apple tv but can't see the movies section in main menu now.

My apple tv main menu no longer displays the "movies" section, just internet, computers, and settings. Does anyone know why or how to get it to show again? Recently rented a movie directly through apple tv but can't see the "movies" section in main menu now. WiFi and home sharing are working.

Welcome to the Apple Community.
Check the location setting for the iTunes Store is correct.
You might also try restarting the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
If you are still having problems try a restore.

Problem While Using SET PF-STATUS

Hi friends,
Here im doing a ALV interactive report , in which two buttons are placed DISPLAY and CHANGE by using SET PF-STATUS ,when ever the user select a record on output and clicks on those button it ill navigate to corresponding transaction, all works fine but here im using Customised application toolbar in which im placing Two Customised Buttons(DISPLAY,CHANGE),standard functions like SORT,PRINT,SEARCH,TOTAL,SUBTOTAL... in the STATUS defined for my program.
The problem is when Bulk data there in output TOTALSigma) not working and displays a message and another one is SUBTOTAL icon to be displayed after total is done in standard reports but here with Total icon the Subtotal icon is displaying in output.
i need to get the SUBTOTAL icon only after the TOTAL is done,
One Solution for this is we can Copy the Staus of Standard program into our customised Status in SE41 tcode, but im not able to get any Status of STANDARD program along with my Customised icons(DISPLAY and CHANGE)..
i hope i information provoded for the issue is enough to resolve the problem
if not let met know for further clarifications needed.
Regards,
Niranjan. G

Hi Niranjan,
First copy standard status using program SAPLKKBL and status STANDARD_FULLSCREEN into your customized program and add your two buttons and code accordingly. It works.
Regards
Venkat

Query on Set-pf status

Hi All,
Here my Question is related to Set pf-status.
I had an ALV program where the output is in ALV grid display i need to show CONFIRM BUTTON on the toolbar and when i click on that it will navigate to one more ALV output with the values where i need to show " APPROVE button on the tool bar.
now here the problem is i am having only one pf-status and it contains both 'CONFIRM ' and APPROVE'.
If i try to write exclude statement its disappearing in both the ALV's.
I googled but couldn't find the accurate answer.Can anyone pls help me.Do i need to create two pf-status for my program? or Can one pf-status helps me.
Thanks,

Hi,
You can use the EXCLUDING extension while setting the PF-STATUS.
CASE ok_code.
      WHEN 'EXEC'.   "While displaying the fisrt ALV
             REFRESH fcode[].
              MOVE 'APPROVE' TO wa_fcodes-fcode.
              APPEND wa_fcodes TO fcodes.
              SET PF_STATUS 'ZPF_STAT1' excluding fcodes.
              Display ALV.
     WHEN 'APPROVE'. "while displaying the second ALV
             REFRESH fcode[].
              MOVE 'CONFIRM' TO wa_fcodes-fcode.
              APPEND wa_fcodes TO fcodes.
              SET PF_STATUS 'ZPF_STAT1' excluding fcodes.
              Display ALV.
ENDCASE.
Hope this helps.
Regards,
Satish Kanteti

Can we set user status in tj30 ?

Hi all,
can we set user status in tj30 ?
i've created a new status profile and it seems SAP automaticaly generate all of status in my status profile to table tj30.
but the data in column estat of table tj30 that created is started from E0001.
can we set the data start from certain number ( for example : from E0060 ) not from E0001 ?
or can we update it from E0001 to E-something ( for example : to E0056 ) ?
please advice or breif me.
many thanks in advance

Hi Eddhie,
You must perform the following steps manually:
1. Transaction SPPFCADM
2. Select the application
              "CRM_ORDER"
1. Click 'Define action profiles and actions'
2. Select the action profile (if you are using the standard action profile)
              "SMSD_SERVICE_ORDER_DNO"
1. Double-click 'Action definition'
2. Select the action
              "SMSD_SRVC_ORDER_DNO_SAP_UPDATE"
1. Double-click 'Processing types'
2. Go to the change mode using the 'Display/change' button
3. Press the "Change" button in the screen area "Method call settings" in the line "Define processing parameters".
4. Click the 'Create' pushbutton in the dialog box that is then displayed.
5. Enter the following data:
a) Element: USER_STATUS
b) Name: USER_STATUS
c) Short description: USER_STATUS
d) Data type tab, ABAP dictionary reference
                         Structure TJ30
                         Field ESTAT
e) "Initial value" tab page, entry "E0060" in the field USER_STATUS (or another allowed user status from the status profile used if desired).
f) Copy the entries.
6. Save
Check OSS Note (663970) for more detail.
Please award points if the solution is helpful.
Thanks
Sumi

How to get the set pf-status and call Transaction work together in SA

hi,
I am using Set pf-status to display the details screen and the same time using call transaction va03 leave screen 0 to display the corresponing sales order.
The issue is both of them are not workin together properly.
it could be helpfull if you give some code which deals the issue in detail...
can you please give details how to get the previous screen once the new screen is obtained thru set pf-status
thanks and regards
Edited by: san dep on Jul 10, 2008 6:25 PM

Hi,
Try this code ---
SET PF-STATUS 'STATUS_NAME' OF PROGRAM 'ZPROGRAM_NAME'.
Regards
Pinaki

125% display setting moves status area

Similar Messages

Maybe you are looking for