1250737 - SMMS: Trace file dev_ms could not be opened

Hi All,
"1250737 - SMMS: Trace file dev_ms could not be opened"
I have this error in smms on a CRM 7.0 W2k8 Failover Cluster, but the snote does not apply due to the version. Everything works, so I think it's not Security related.
Could you please help me in finding the root cause for the above error.
Thanks,
Rudolf

Hi Chetan,
according to smms (goto/Trace level/increase, decrease) it seems, that he trace level could be changed in every combination where CI/DI/ASCS are running (see investigations below):
But by chance I found the following (1.):
1. If only DI is started I  can read the dev_ms via smms, when ASCS was on the "DI"-Node -> neither (I)* nor (II)*
- Moving ASCS to the "CI"-Node, ms_dev was not found -> (II)*
*Compared with Note 1250737:
(I) using CI -> dev_ms could not be opened (due to M in CI "dev_ms on C":)
(II) using Application-Server not on the "ASCS-Node" -> dev_ms not found (absolute Path used instead of share)
2. If only CI was started, dev_ms could not be opened, regardless where the ASCS is running -> (I)
3. Both Application-Server running and ASCS on "CI"-Node:
- logged on DI for smms trying reading dev_ms via DI -> dev_ms not found (II)
  (logged on DI for smms trying reading dev_ms via CI -> dev_ms not found (II))
- logged on CI for smms trying reading dev_ms via DI -> dev_ms could not be opened (I)
  (logged on CI for smms trying reading dev_ms via CI -> dev_ms could not be opened (I))
4. Both Application-Server running and ASCS on "DI"-Node:
- logged on DI for smms trying reading dev_ms via DI -> dev_ms could not be opened (?)
  (logged on DI for smms trying reading dev_ms via CI -> dev_ms could not be opened (?))
- logged on CI for smms trying reading dev_ms via DI -> dev_ms could not be opened (I)
  (logged on CI for smms trying reading dev_ms via CI -> dev_ms could not be opened (I))
I don't know if it's really related to note 125073, maybe it has something to do with access violation: why is (1.) working, and (4.) not?
Thank you very much for your effort
Regards
Rudolf

Similar Messages

  • The file "?" could not be opened because it is empty.

    I put about 30 photos on my thumb drive so I could take them with me.  I saw them on the drive at one point, now on some of them I am getting the error; "The file "?" could not be opened because it is empty."   The file still is large in size, and there is data there, but "Preview" will not open it. These are important photos for work, and I want to know if there is any other way to retrieve them.  Also, does anyone out there know why it did this.  Only some of the photos can no longer be opened, and I did NOT edit any of them.  I simply drug them over to a portable drive.
    Thank you,
    Darren

    Does this involve iPhoto in some way?

  • Can't open video file - Codec could not be opened

    Hello,
    I have just purchased a camcorder, and can't open the video files that it creates. Final Cut Express tells me "Codec could not be opened". I'm not sure how to find and install the proper codec
    Some background
    - The files are AVI format
    - Quicktime opens the files, but all it get is a blank screen playback with no sound
    - The files play on my WindowsPC (but what good is that). The PC tells me that the file is H264, 1280x720, 30 frames/s, 681 kbits, 24 bit, AVC H264 format (FFDS compression).
    - The camcorder is a Polariod HD camcorder DVC-00725F. Polariod is no help - they only support Windows (no wonder they have declared bankruptcy)
    My computer is an iMac 24
    - Final Cut Express 4.0.1
    - QuickTime 7.6.0
    Thanks for any help
    Sean

    When I open it in quicktime, I get a big black screen. it plays, but no picture (should be video of a chair - is this what you are seeing?)
    QT inspector shows me
    'H264', 1280 x 720, Millions
    Microsoft ADPCM, Mono, 11.025 kHz
    When I use Streamclip and show stream info it says
    Stream: CLIP0009.AVI
    Path: ~/Movies/iMovie Events.localized/Testing/CLIP0009.AVI
    Duration: 0:00:03
    Data Size: 2.20 MB
    Bit Rate: 5.60 Mbps
    Video Tracks:
    ?, 1280 × 720, 30 fps, 5.56 Mbps
    Audio Tracks:
    MS ADPCM mono, 11.025 kHz, 44 kbps
    Stream Files:
    CLIP0009.AVI (2.20 MB)
    Sean

  • Preview: The file "_" could not be opened because you do not have permission...

    Whenever I try to open an image, this will pop up.  I've read other discussions on this problem, I've followed the steps, and it still won't open.  Earlier today my computer was saying my startup disk was almost full, so I deleted most of my pictures.  At this point, I've tried Get Info > Sharing and Permissions > +admin and unlocking the lock in the bottom right.  Is there anything I'm missing or could do?
    Also, I haven't used Time Machine at all.

    That's not where you need to go.
    You shouldn't have any reason to change permissions unless something changed them first.
    Also, it may not be that the permissions are wrong, but something related to the disk being too full.
    If all of those picutres are in your Home folder, and there is at least 9GB or free space, you'll need to reset your home folder permissions:
    Boot into Recovery HD by holding down cmd-r on restart.
    When that boots, open Terminal from the Utilities menu.
    Type "resetpassword" without the quotes and hit return.
    When the reset utility opens, select your hard drive, then your user name.
    At the bottom of the window there is a button to Reset home folder permissions and ACLs; click that.
    Quit out of that and also out of Recovery.
    If the pictures are not in your home folder, that may be affecting your access.

  • Mail V6.3 pdf attachments "the file could not be opened because it is empty"

    I received an email with a pdf document attached.  When I try to open it by saving it or directly from the email, I get the message "The File 'filename' could not be opened because it is empty."
    The file extension is correct with .pdf. Adobe is up to date. It will not open in Preview either. No updates needed for Mac OS 10.8.3.

    Does this involve iPhoto in some way?

  • Handheld file could not be opened on sync

    After reading Pm Trace Database Error I was able to download fileZ and fix this problem with this file but I have two more files with the same error, (4004) handheld file could not be opened, syncerr_file_not_open. They are multimail messages and midataidcache. I could find multiimail using filez but not midataidcache. I found midataidcache in a backup folder and put it back on the handheld. I am not that "great" at this but will try and fix this with your help. Thank you!
    Post relates to: Palm TX

    You installed wireless sync. Go to wireless sync then tap on settings. Then go to connections then go to advanced and check enable other sync apps.
    Post relates to: Treo 800w (Sprint)

  • Why is it that when I try to open a project, it says "the project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type"?

    It could be opened last night but today it just kept showing "the project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type". I really need to access my video.
    Some help out there, please?

    Hi,
    Please check this out : https://forums.adobe.com/message/4626663#4626663#4626663
    Thank You
    Arjun

  • Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

    Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
    I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
    Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
    Thanks, Rick

    The hard drive may be dying anyway, or the directory damaged because it is so full.  You should never let the hard drive get over 85% full.
    A -36 error is a read/write error.
    All you did with the power is reset the SMC.  Does nothing to reset everything to factory settings. 
    Do you have your original 10.4 installer discs for the MacBook?
    Is your data backed up?

  • I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

    I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
    Help!
    Thanks, Mark

    Unfortunately, the error message gives no details about what codec might be missing or what it needs.
    If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
    It's a stupid error message. Apple should do better than that.
    Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
    I'll call Apple support when I get a chance.
    Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

  • I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document "Tina-19.jpg" could not be opened. Photoshop cannot open files in the  "Adobe Photoshop JPEG file" format. What does this mean? I have opened my phot

    I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the  “Adobe Photoshop JPEG file” format.
      What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my pictures

    JoeLib wrote:
    You type way faster than me Gene.
    Well, not necessarily in this case.
    According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
    Gene's post:       Dec 29, 2014 5:54 PM
    Joe's post:          Dec 29, 2014 8:57 PM

  • HT3775 I have a bunch of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document "001.MPEG" could not be opened. A required codec isn't available." Any advice on getting these to play?

    I have a slew of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document “001.MPEG” could not be opened. A required codec isn't available." Any advice on getting these to play? Thanks!

    Try installing Perian or VLC. Some AVIs require a codec which simply isn't available for Mac OS X.
    (85018)

  • Cannot open Pages documents that I've worked on.  I open a new document, work on it, then save and close it.  When I try to open the document again, I get the following message: The document "[name]" could not be opened. The file isn't in the correct form

    I cannot open Pages documents that I have worked on and saved.  When I try to reopen Pages documents that I've saved, I get the following
    message:
    "The document “[name of document]” could not be opened. The file isn’t in the correct format.
    The file might be corrupted, truncated, or in an unexpected format."
    I have downloaded the latest update to iWork, but that doesn't help.
    I use Mac OSX 10.6.7
    I am using Pages '09 version 4.0.5 (852)
    If anyone can help, I would greatly appreciate it.
    Best regards,
    New York Mac User

    A few general trouble shooting tips that may apply here:
    1. If you used Software Update to do the OS update(s) to reach 10.6.7, go to http://support.apple.com/downloads/ and download and apply the Mac OS v10.6.7 Combo Updater. The Combo Updater contains some fixes that were not included in the incremental updaters used by Software Update.
    1a. Check that you have the current version of Pages (and of the other iWork applications) installed. All three applications' current version numbers end in .0.5
    2. A common cause of malfunctioning applications is a corrupted preferences file (.plist file). Your Pages '09's plist is at yourname > Library > Preferences > com.apple.iWork.pages.plist
    Quit Pages, locate the file and Drag it to the Desktop (or to the Trash).
    Restart Pages and attempt to open one of the files.
    If all is well, Trash the plist file and empty the Trash.
    If there's no change, AND you've made changes to the Preferences that you wish to keep, drag the file back to its previous location, replacing any new one that has been created.
    Regards,
    Barry

  • The itunes application could not be opened.  The file name was invalid or..

    ...too long.
    No idea when this started but cannot launch iTunes at all. To reiterate, when I try to launch iTunes I get the following error message: The itunes application could not be opened. The file name was invalid or too long.
    I actually uninstalled it and reinstalled on my external drive and it came back with the same error. Any ideas on how to troubleshoot what caused this? I am at my wits ends with this!

    I can't get mine to open at all. I even try clicking on a song to see if that will open it, nope. I have hooked up my iphone and ipods, nope. Click the icon, nope still nothing. It keeps erroring, but won't let me copy the error to put in here. I looked at the report it wants to send out, but there is nothing that says why it is erroring. Anyone else having this problem. Please email me at [email protected] to let me know what you did to solve it, or who I have to talk to to get it fixed... Thank you

  • IPhoto9: "library could not be opened because the file system of the library's volume is unsupported."

    Can please anyone help me with this issue.
    After upgrading from iPhoto8 to iPhoto9 my library won't open anymore. I have stored all my pictures on a NAS (Buffalo Link Station Duo). It all worked fine but since upgrading to iPhoto9 I do have the following problem:
    When opening iPhoto I receive a message that the library needs to be updated. I assume that iPhoto should just do this sort of automatically in order to upgrade to iPhoto9.However, next message I receive then is
    "The library could not be opened because the file system of the library's volume is unsupported."
    Apple support so far does not seem to be able to solve my issue. Anyone else having had the same issue and having a solution to this?
    Thanks a lot for your help.

    There is no solution.
    IPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.While you have been lucky to date, many folks with a library on a NAS found that it worked for a while and then the problems started.
    Workaround: Put the Library on a Disk Image formatted Mac OS Extended (Journaled) and store that on the NAS. But the real solution is to use a properly formatted disk for the Library.
    Regards
    TD

  • What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported".

    What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?

    Kirby Krieger wrote:
    Hi Shane.  Not much in the way of thoughts - - but fwiw:
    How is the drive attached?
    Can you open large files on the drive with other programs?
    Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
    Can you reformat the drive and try again?
    Hi Kirby,
    I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
    Thanks,
    Shane

Maybe you are looking for

  • A Guide to HDMI Cable Needs

    Often on this forum we try to help various signal quality issues by suggesting different cabling hook up options.  HDMI is an industry standard, but has several drawbacks - one of which is the multitude of HDMI variants, with some manufacturers even

  • Any function module for PIC01??

    Hi Guys, Could you please tell me, do we have any function module / BAPI for the transaction PIC01 - to create supersession.... suggest me if any one worked on supersession conversion.... -Mahesh.

  • Importing an object in RFC

    Hello experts, I was asked to do a RFC, but i was told that what the RFC will recieve is an object... I have done everything else, it works when i call it locally from a report... but when i change the function to be remote, i get this error: You can

  • I'm not able to get my mac os 10.6.8 to print to a Savin C2525, any suggestions?

    I'm not able to get my Mac OS 10.6.8 to print to a Savin C2525. I've loaded the drivers and after checking for updates and tried to add the printer. The 1st time I tried, it started printing and I could see the file name on the first page, after it p

  • I have loaded version 8 three times yet I still appear to have the old version even after restarting, why?

    I don't know what else I can say about my problem. I got the popup that told me to update to the new version, which I did...or so I thought, 3 times!! But I still seem to have the old version. What am I doing wrong?