12c agent install fails with error - The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed
Hi,
I am trying to install 12c agent on windows 7 64 bit server by following m.note .
It is failing with Agent Configuration failed, please see below error message.
INFO: length of temp is2
INFO: Return value:C:\/Oracle/12.1.0.3.0_AgentCore_233/core
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log C:\Oracle\12.1.0.3.0_AgentCore_233\core\install\logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode finished for action: configure
INFO:
INFO: You can see the log file: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\cfgtoollogs\oui\configActions2014-10-03_08-48-15-AM.log
INFO:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233>exit /b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\oui\bin\runConfig.bat ORACLE_HOME=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0 RESPONSE_FILE=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML={oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent Configuration Failed
Thanks,
Looks like , J2EE is having a problem connecting to the DB.Pls. chk. the following
-If you have configured the loop-back adapter , if installing on a local system & updated the /etc/host file with your ip address and host name.
or if the system is part of some n/w group and has ip address assigned ?
-Jdk 1.4 version is installed in your system
-Enough free Disk space available in the system
-How much RAM your system has which windows version you are using ?
-Is the DB is coming up properly ? its error related to this. check the logs.
-If the ports used by sap install / run used by other services running on the system ? & user have admin. privileges on the system .
Pls. update with your findings on above same , for the step next ...
Thanks ,
Uppal
Similar Messages
-
Hi Board,
i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
we drive a 2 node DAG (Location1-Ex1-mb1
Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
Log Name: Application
Source: MSExchangeRepl
Date: 28.09.2012 00:37:17
Event ID: 2112
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: Location1-Exc1-MB1
Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
Followed by
Log Name: Application
Source: MSExchangeRepl
Date:
01.10.2012 03:33:06
Event ID: 2024
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User:
N/A
Computer: Location1-Exc1-MB1
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
The backup Application - Symantec Backup Exec 2010 R3 – states, this error
Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
Check the Windows Event Viewer for details.
Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
to restart the MS Exchange Replication Service – BUT the mentioned eventID
8229 isn´t present on any of the both Mailboxservers.
The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
This confuses me, since all Backups are normally taken from the passive copy of a Database.
So my questions to the board are:
* Does anyone is facing similar issues?
* Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
- * Does someone know the conditions, why shadows copies remain and
aren´t removed in a proper manner?
What can cause the circumstance, that only 1 DB is facing such issues?
Any suggestion is welcome!
BR
MarkusHi Lenora,
I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
those things i´ve all tried now:
- Backup from passive DB (forced within Symantec Backup Exec)
- Backup from active DB (forced within Symantec Backup Exec)
- Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
- Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
All those attempts failed.
But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
Backups are working again on all DBs!
THX for your replys.
Best regards
Markus -
AppContainers_test fails with error during pre-test configuration checks
Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem -
Can anyone tell me where to update the reply address?
I have AD synced from on-prem to Azure, then I setup a website on azurewebsites.net, then created a CNAME record from portal.mydomain.com to portal.azurewebsites.net. When I try to login using portal.mydomain.com I get:
AADSTS50011: The reply address does not match the reply addresses configured for the application.
Can anyone help? Thanks
Frank RussoHi Frank69,
Thanks for posting here!
It appears to me that the application is unable to find the URL you have configured on Azure or could be missing from the list. As a result the application is attempting to authenticate against AAD but failing to match the URl it wants.
I would suggest you to re-configure your AAD application on Azure and set one or more reply URLs.
Reference link:
http://www.matvelloso.com/2015/01/30/troubleshooting-common-azure-active-directory-errors/
Regards,
Sadiqh
Disclaimer: This response contains a reference to a third party World Wide Web site.
Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there.
There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. -
Windows 10 upgrade fails with error message "we couldn't update the system reserved partition"
HP and Microsoft both indicated my notebook was ready for upgrade to Windows 10, but when I tried to do the upgrade it failed - repeatedly - with the error message from Microsoft that "we couldn't update the system reserved partition." What to do?
The system reserved partition serves a purpose. If it is deleted, then the OS will not boot back up. In which case you are toast.ON THIS PAGE, it tells what the partition is used for.-The Boot Manager and Boot Configuration Data : When your computer boots, the Windows Boot Manager starts up and reads the boot data from the Boot Configuration Data (BCD) Store. Your computer boots the boot loader off the System Reserved partition, and it boots Windows from your system drive. I advise that you not do what CanhThanh is instructing
-
Hello everyone,
After I have finished with Lync FE, Monitoring and Archiving, and WAC server I was going well with Edge server until I got to the point of publishing the topology with Edge Server.
First time publishing went well but I wanted to place the configured IP addresses in the Edge server IP topology with a different IPs and when I published i got the below error.
I tried looking in the trusted Services in Configuration OU using ADSI Edit but never was able to figure out how do I find the duplicated entries? I used also used Softerra LDAP adminsitrator and was able to find 5 values but not sure which one to delete
among them.
Could anyone advise where to look? I'm posting the error as well below
Error: Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local".
▼ Details
└ Type: InvalidDataException
└ ▼ Stack Trace
└
at Microsoft.Rtc.Management.Deployment.AD.ADSessionExtension.FindUnique[TResult](ADSession session, QueryScope scope, ADObjectId containerId, QueryFilter filter, String name, Boolean throwOnMissing)
at Microsoft.Rtc.Management.Deployment.Core.CompatEdgeProxy.Remove(ADSession session, String edgeProxyFqdn)
at Microsoft.Rtc.Management.Deployment.Roles.AccessEdge.GlobalDeactivate(IService service)
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog[T](Action`1 action, T arg)
2/19/2014 12:25:28 PM
Error
└
Error: An error occurred: "System.IO.InvalidDataException" "Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local"."
Mohammed JHHi,
Glad to hear you have solved the issue and shared the train of thought.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Multiple Apache-Weblogic plug-in configurations for the same host
Hi BEA,
I have a situation where I have more than one weblogic server/cluster both using
the same Apache to proxy. Reading the Apache plug-in configuration I gather that
below should work. In Apache (httpd.conf):
<Location /path1>
SetHandler weblogic-handler
WeblogicHost app1
WeblogicPort 7001
</Location>
<Location /path2>
SetHandler weblogic-handler
WeblogicHost app2
WeblogicPort 7001
</Location>
In this case the later Location of the two works fine and the other seems like
it is just not there. (If the two are switched the other works fine...) The thing
is that, if possible, I would like to avoid splitting the two locations onto two
different VirtualHosts (which works).
Does anyone have any ideas on how to solve this and still avoid the use of multiple
VirtualHost-definitions?
Is it due to a limitation in Apache module architecture that the configuration
above does not work or is it a design choice in the plug-in?
//GG
Gunnar,
I would post this Apache proxy plug in question to the
weblogic.developer.interest.plug-in forum
Chuck Nelson
DRE
BEA Technical Support
-
Do i need the POST-INSTALLATION configuration for linux+oracle?
hello
i install the oracle10g on redhat9 box,JUST finish the installation,i open the Terminal windows,type ¨sqlplus¨ command,linux tell me ¨commnd not found¨. i guest the installer don´t set the env variable(in windows operating system,the installer automatically set the path variable during the install procedure).
i can SUCCESSFULLY access the browser console of em and isqlplus.
but after i restart the redhat,the browser can´t access both
em and isqlplus(connection reset).when i telnet the 5500 and 5560 port,i found that they haven´t be open.and i suspect that the oracle database haven´t been automatically started.
question 1:how can i MANUALLY start oracle after i restart the linux?
question 2:how can i config the oracle after the install to make it work perminently?or post-install configuration.
thank you very much!Oracle will not start automatically. You have to enter as oracle user and start the listener manually and then the database .
Command are like : lsnrctl start
Then , type svrmgrl ( the server manager console ) , connect internal , and then startup .
Later on you can write scripts for automatic startup of the database and listener .
G J Shankar Nath
Deputy System Manager
GNRC Limited -
Crawl fails with error when space is entered for source parameter value.
Hi,
When we give blank space value for any of the Source parameter then after starting the crawler schedule,following error appears in red:
"Oracle Secure Enterprise Search Error" and no logs are created.
Thanks,
ShashankHi,
When we give blank space value for any of the Source parameter then after starting the crawler schedule,following error appears in red:
"Oracle Secure Enterprise Search Error" and no logs are created.
Thanks,
Shashank -
CORDIAL SALUDO,
ESTOY ADQUIRIENDO SEÑALES DE TENSION Y DE CORRIENTE DE UN SISTEMA FOTOVOLTAICO Y NECESITO GRAFICAR DICHAS SEÑALES CONTRA EL TIEMPO LOCAL DE MI COMPUTADOR EN EL EJE DE LAS "X" , PARA LA CUAL SELECCIONO EL MENU PROPERTIES DE LOS WAVEFORM GRAPHS, LUEGO SELECCIONO FORMAT AND PRECISION Y LUEGO EN EL EJE DE LAS X SELECCIONO ABSOLUTE TIME, PERO EL PROBLEMA ES QUE CUANDO HAGO LA ADQUISICION ESE TIEMPO EN EL EJE DE LAS X NO ES EL TIEMPO VERDADERO CONFIGURADO EN MI COMPUTADOR. ¿ COMO CONFIGURO LOS GRAPHS PARA QUE EL ABSOLUTE TIME EN EL EJE DE LAS X SEA EL MISMO DE LA HORA LOCAL CONFIGURADA EN MI COMPUTADOR??.
GRACIAS!Hola Andres.
Basicamente, hay 2 maneras de hacer lo que tu quieres
La mas sencilla ( mira el doc asociado) es construirte una waveform con t0 como hora del pc y dt el adecuado a la velocidad de adquisicion de datos. No olvides desmarcar en el grafico la opcion "ignore timestamp" para que te presente la hora por defecto.
Tambien puedes usar la opcion de tiempo absoluto, en cuyo caso tienes que cablear el t0 convertido a DBL a un property node del eje x "Offset" y el dt a "increment"
Espero que te sirva. Si tienes dudas, pon tu vi aqui y le echare una ojeada.
Saludos
Alipio
"Qod natura non dat, Salmantica non praestat"
Attachments:
hora_pc.doc 63 KB -
Sccm 2012 agent not installing with error CcmSetup failed with error code 0x80041013
We have sccm 2012 r2 enviroment , when we deploy client agent to one DC , client agent is not getting install with below error .. I can able to install agent to all the machines except one DC.
CcmGetOSVersion failed with 0x80041013
CcmSetup failed with error code 0x80041013
Any idea ?The error code 0x80041013 translates to:
Provider load failure
Source: Windows Management (WMI)
Like Briij suggested, you should try to fix the WMI repository.
Regards,
Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja -
I am trying to install CS6 Design and Web Premium trial and it fails with error code 20
I am trying to install CS6 Design and Web Premium trial and it fails with error code 20
Re-extract or copy the contents of the installer. Let us know if this helps.
See http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html -
I have an App which subscribes to Windows events and if it is matching the filter criteria, it reports it.
I have observed a strange problem on non-English windows 2008 OS.
If the Windows event is of source = EventLog (e.g. Event ID 1102: Security log was cleared), then EvtFormatMessage fails with error code 15033. But if the event is of any other source (e.g. Microsoft Security Auditing), then it works absolutely fine.
While calling EvtOpenPublisherMetadata, I have created locale ID as MAKELCID(MAKELANGID(0x09,0x01) i.e. Primary language = LANG_ENGLISH and Sub Language = SUBLANG_DEFAULT.
I want events details in English only and hence primary language is put as English. If I change this macro to have primary language as LANG_CHINESE and sub language as SUBLANG_CHINESE_SIMPLIFIED, then it works fine but gives back event details in native
OS language (Chinese in this case). That's not a desirable output for me.
Following is the way I'm calling EvtFormatMessage
EvtFormatMessage(hMetaData, hEvent[0], -1, 0, NULL,
1 /* EvtFormatMessageEvent */,
m_pTextBufferSize/sizeof(WCHAR),
m_pTextBuffer, &dwBuffUsed);
A work-around for this is to install a MUI pack for English language. If the MUI pack is installed then it works fine. But I cannot enforce users to have this pack installed on all their systems.
My question is why this API is working for some set of Events whereas failing for some specific Events? Am I doing something wrong?
Any help would be appreciated.
TIA,
Regards,
Yogesh
Was on vacation and hence the delay in replying.
As mentioned earlier, while calling EvtOpenPublisherMetadata, I have created locale ID as MAKELCID(MAKELANGID(0x09,0x01)
i.e. Primary language = LANG_ENGLISH and Sub Language = SUBLANG_DEFAULT. If I change this macro
to have primary language as LANG_CHINESE and sub language as SUBLANG_CHINESE_SIMPLIFIED, then it works fine but gives back event details in native OS language (Chinese in this case).
This is not an option for me as I want event details in English language only.
Regards,
Yogesh
Regards, Yogesh -
Hi,
We are running a Mountain Lion Server with Open Directory / LDAPv3, as far as I can tell. My responsibility is to get my CentOS 6.3 box running Samba v. 3.5.10-125.el6 to authenticate users against the ML / OD box. I can ssh to the CentOS box OK and I can get Guest access to the Samba share to go OK too. Also, the OD passwords on the LDAP server are set to 'Open Directory' so I guess that means that they are encrypted and the Samba server is set to send encrypted passwords. But when a user tries to properly authenticate using either say via a Mac client Finder [Command-K], or smbclient, the Samba server will generate this message:
check_ntlm_password: Authentication for user ['name'] -> ['name'] FAILED with error NT_STATUS_LOGON_FAILURE
(I am blanking out the user name on purpose).
Of course there is more to the story, but those are the basics.
Here are the relevant parts of my smb.conf. FWIW, the CentOS / Samba box is called Jupiter.
Thank you,
NickZ
[smb.conf]
[global]
display charset = UTF-8
realm = SATURN.MCLEAN.HARVARD.EDU
netbios aliases = ANL
server string = Welcome To The Jupiter Samba Server Version 3.5.10-125.el6
interfaces = lo, em1
security = SERVER
update encrypted = Yes
password server = saturn.mclean.harvard.edu
smb passwd file = /var/lib/samba/private/secrets.tdb
passdb backend = ldapsam:ldap://saturn.mclean.harvard.edu
passwd program = /usr/bin/passwd %u
unix password sync = Yes
lanman auth = Yes
client NTLMv2 auth = Yes
client use spnego principal = Yes
kerberos method = system keytab
log level = 2
syslog = 3
log file = /var/log/samba/log.%m
max log size = 50
name resolve order = host lmhosts wins bcast
server signing = auto
preferred master = Auto
ldap admin dn = uid=DirAdmin,cn=users,dc=saturn,dc=mclean,dc=harvard,dc=edu
ldap group suffix = cn=groups
ldap passwd sync = yes
ldap suffix = dc=saturn,dc=mclean,dc=harvard,dc=edu
ldap ssl = no
ldap user suffix = cn=users
usershare allow guests = Yes
idmap backend = ldap:ldap://saturn.mclean.harvard.edu
idmap uid = 10000-20000
idmap gid = 30000-40000
cups options = raw
[homes]
comment = Home Directories
read only = No
[printers]
comment = All Printers
path = /var/spool/samba
printable = Yes
browseable = No
[anl]
comment = Main ANL Share
path = /anl
read only = No
guest ok = Yes
hide dot files = NoTurns out a printer driver installed on an XP (even W2K(?)) was (apparently?) flooding the OS X SMB server to the point of collapse. Uninstalling the "HP Tools" part of the driver cleared it up. The printer is an HP LJ1300. I had downloaded the full driver from HP.com. I don't know if any/all these conditions need to be matched, but: the printer was on the network using an HP print server JetDirect EX Plus, and the computer(s) in question were connecting directly to it (not via a print server). It's been too long ago, but there were always several errors in the System Log (Win XP Event Viewer) that correlated with the errors on the OS X server.
Proud to say that since that day (10+ months ago) I've not seen it happen again. whew. -
Windows 8 Windows Update fails with error 80244FFF
Windows 8 Windows Update fails with error 80244FFF
Hi @SURAJITsaha ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 14-b049tu Sleekbook and issues with a Windows update.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue.
You might have to temporarily disable your virus protection.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!
Maybe you are looking for
-
I got a virus on my computer and had to wipe it clean. I need to reinstall photoshop. I have a membership that I pay $9.99 a month to use it. How do I re-install?
-
Hi I have cr8ed rfc lookup in UDF,and I want to parse this xml and use only the value I need I read in the forum that there are 2 ways of doing it : DOM and SAX any1 knows good weblogs/threads which ellaborates on how or explain how it should b done
-
Need to set a password for safari
I would appreciate any assistance in setting a password with Safari. thank you
-
HT2305 Apple Mobile Device link for a PC.
Hello everyone. Can someone direct me to a link to save the apple mobile device download on a flash drive to put on a pc so i can use my iphone as a internet. No internet unsecure access in this building. Thanks.
-
how to find users logged in windows os using a java program