12c EM Installation on 32 bit OEL

Hi All,
Minimum Ram size for 12cR1/12cR2 EM installation on OEL 5.7 32 bit oprating system.
i know that Oracle docs said minimum 6gb ram require.but this size for 1000 target database.

pls look at Meeting Hardware Requirements

Similar Messages

64 bit OEL install hangs at installing dogtail in OVM 2.2

I recently upgraded my server to OVM 2.2 and swapped out the dual core AMDs to quad core AMDs at the same time.
Since then I have been unable to create any 64 bit OEL servers. In every instance the install hangs when Installing dogtail-0.6.1-2.el5.noarch
This used to work at 2.1.5 and I can deploy the existing templates, but they are OEL 5.3.
VM-Server Specs
[root@vm-server ~]# uname -a
Linux vm-server 2.6.18-128.2.1.4.9.el5xen #1 SMP Fri Oct 9 14:57:31 EDT 2009 i686 athlon i386 GNU/Linux
[root@vm-server ~]# lspci
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:06.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
01:07.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
03:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
03:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
06:00.0 RAID bus controller: Silicon Image, Inc. Unknown device 0242 (rev 01)

2 new updates
1) I get the same errors when trying a command line install
2) I can successfully create fully virtualised VMs
So if all else fails I can create fully virtualised VMs and then convert them, which is a bit of a pain but will at least give me working templates.

When installing itunes 10.5.1 for win 7 64 bit get message that installer is 32 bit.

Atempted to install itunes 10.5.1 for Win 7 64 bit. Receive dialog box that the installer is 32 bit. Points me to an address in Apple for Bonjour Print Services for Windows. After clickin on OK the install proceeds but Itunes will not start.
Itunes has also reformated the library so an older version of itunes can nolonger read the file.

I got the same message about the network resource that I can't access. The only difference is that I couldn't install Itunes 10.3 because I can't remove the old version of Bonjour. I couldn't get rid of anything in add/remove programs, but I went into my program folders and deleted everything that had to do with Itunes. I also ran a Windows Cleanup Utiltiy. Nothing will work. I still can't remove Itunes, Bonjour, Quicktime, MobileMe Control Panel, Apple Mobile Device Support, Apple Application Support, or Apple Software Update in add/remove programs because they are on a network resource that I can't access even though I deleted them from the program folders. This is very frustrating!

ORA-01017: invalid username/password; for Oralce 12c OEM installation

Hi Experts,
Following error Oralce 12c OEM installation ,i have no clue sys user passowrd is correct in response/new_install.rsp file
[oracle@sdp12 OEM_Packages]$ ./runInstaller -silent -responseFile /oracle/oracle8/OEM_Packages/response/new_install.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 400 MB. Actual 1222 MB Passed
Checking swap space: must be greater than 150 MB. Actual 4000 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-02-24_06-22-19PM. Please wait ...[oracle8@sdp38 OEM_Packages]$
ERROR: ERROR:Exception occurred while connecting to database. Check the connection details of the database you specified and retry.
ORA-01017: invalid username/password; logon denied
Unable to connect to the database and validate whether it is a supported database due to one of the following reasons:
(1) Incorrect credentials
(2) Listener may be down
(3) Database may be down
Check the credentials ,the status of the listener and the database and retry.
i am able to connect using same username password
[oracle8@sdp38 response]$ sqlplus sys/sys512@TET1
SQL*Plus: Release 11.2.0.1.0 Production on Sun Feb 24 18:29:15 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
From response/new_install.rsp file
DATABASE_HOSTNAME=sdp12
LISTENER_PORT=1521
SERVICENAME_OR_SID=TET1
SYS_PASSWORD=sys512
SYSMAN_PASSWORD=sysman512
SYSMAN_CONFIRM_PASSWORD=sysman512
i have no clue here, any help greatly appropriated
thanks

few things you can check :
a) Is there a password file ? Is the password correct in it ?
b) SYSDBA remote login is disabled. remote_login_passwordfile is not set to EXCLUSIVE in the spfile or init.ora.
Set: remote_login_passwordfile= EXCLUSIVE
Create a password file:
Unix: $
orapwd file=$ORACLE_HOME/dbs/orapw$ORACLE_SID password=sys entries=5
Windows:
C:\> orapwd file=%ORACLE_HOME%\database\pwd%ORACLE_SID% password= sys entries=5
To synchronize the password for sys for normal connections and connections as sysdba connect as a sysdba user and reset the sys password:
$ sqlplus "/ as sysdba" SQL> ALTER USER SYS IDENTIFIED BY change_on_install;

7.20 SAP Web AS installation on (32 Bit, 2 GB) Windows OS

Hi ALL,
I need 7.20 SAP Web AS installation on (32 Bit, 2 GB) Windows OS.(java Server)
I am new to this Server Installation. This would be my first Server Installalation.
Kindly share any installation guide available for 720 landscape installalation. I need a bit detailed doc.
Also do let me know if 32Bit, 2 GB is enough?
Waiting for reply
Regards,
Archana

Hi Archana,
Check the Dowload link:
http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/a0a6bd7b-3dfc-2c10-eb95-aae0f777d4ab
Refer to blog for procedure. Although the procedure is for NW 7.3 installation the procedure is similar and the downloads are already available from above link.
http://tknight.org/sdn/show/25031
2GB should be enough even though 3GB is recommended.
Regards,
Srikishan

Installables for 32 bit windows machines

Hello,
It seems SAP has stopped providing installables for 32 bit windows machines. IS it correct?
If yes which SAP versions can be installed on - Windows server 2003 SP2 (32 bit).
Can we have ECC6 EHP4 based on SQL database on it?
Thanks,
Ambarish

Hi,
If you read the installation guide then following thing is mentioned there:
As of SAP ERP 6.0 SR3, you must install an SAP ERP system only on 64-bit operating
systems.
For the dialog instance, you can still use a 32-bit operating system. Therefore, you
only see the folder Software Life-Cycle Options on the Welcome screen when you start the
installation from a 32-bit installation master DVD.
You might need to install dialog instances on 32-bit operating systems if you want to
use 32-bit SAP NetWeaver components, such as Adobe document services. However,
first check whether such 32-bit components can run on 64-bit operating systems. If
so, we recommend running these 32-bit components on a 64-bit operating system.
Thanks
Sunny

Error in installation of 64 bit 11g client on solaris sparc64 bit

hi,
i am getting below error while installing the 11g 64 bit client on solaris sparc 64 bit machine.
following error is occurred while installing 64 bit oracle 11.2 client on Solaris 64-bit sparcv9 OS:
Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile
kindly assist.
Thanks,
-Shubhen

user12052679 wrote:
hi,
i am getting below error while installing the 11g 64 bit client on solaris sparc 64 bit machine.
following error is occurred while installing 64 bit oracle 11.2 client on Solaris 64-bit sparcv9 OS:
Pl read the Install Guide to ensure you meet all of the pre-installation requirements - http://docs.oracle.com/cd/E11882_01/install.112/e24347/pre_install.htm#CIHFICFD
Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile
kindly assist.
Thanks,
-ShubhenHTH
Srini

How to enforce 32 bit runtime installation on 64 bit systems for VS 2010?

I have a VB6 application that uses a .Net dll that wraps the Crystal Reports for Visual Studio 2010 functionality. I make an installer with VS 2010 that has a dependency on the Crystal Reports for Net 4. However, on 64 bit systems only the 64 bit runtime is installed, while I need the 32 bit installer. As I add the Net .dll as a file to the installer probably it is not detected that this .dll has been compiled for x84 systems only. Is there a workaround for this? Could I for instance hack the bootstrap package?

Why are you mixing COM and .NET? Time to upgrade to .NET completely.....
Set your project to build x86 mode only and not use Any CPU.
Thank you
Don

B1DE (AddOn Installer) for 64 bit server

Hi All,
I have a problem. One of my client has a 64 bit server. AddOn installation created with B1DE for SAP 2007 doesn't work on that server. After running SAP AddOn is trying to install, and then there is an error. Is there any way to create AddOn installation files that work on 64 bit server?
Regards
Hmg

Both Robin and Owen are right... You need to run your code as forced 32 bit.
The reason is the following:
- A default project in Visual Studio is compiled as "Any CPU"
   - Any CPU means that you code will be executed as 32bit on a 32bit machine, and 64bit on a 64bit machine.
   - The Any CPU option is great for pure .NET (since all parts of it can run 32bit and 64bit)
   - In case of the SAP SDK and the AddonInstaller.dll, these are COM-based unmanaged code
      - If such unmanage code is not written to work with 64 bit, problems like yours can occur (this happens not only for SAP SDK... Tons of API out there have the same problems)
- If you change the Any CPU option to the x86 option, you will force 64 bit mashines to run your code in "simulated" 32bit (Don't worry.. it is quite fast and gives no problems)
We are you this with our 64 bit customers and without any problems...
Lastly, if you wish to know more about this please hear the following podcast that describes the issue in detail (A good listen): http://www.dotnetrocks.com/default.aspx?showNum=341
/Rasmus

Cannot find an Oracle Linux installation for 32 bit machines

Can anyone show me where to find a linux oracle 11g or 10g installation for a 32 bit machine.
The ones I downloaded from oracle are all for x86 64bit machines.
Thanks

On following page
http://www.oracle.com/technology/software/products/dat
abase/index.html
this is the link
http://download.oracle.com/otn/linux/oracle11g/linux_x
86_11gR1_database.zipWhat I actually said is that the link provided is for 64bits linux machines.
When I try running uname -r on my linux bash prompt, I get the i3686 tellin g me that I am running a 32bit machine.
On the other hand, installation guide specifies that we should check the kernel version and system architecture.
I don't think I should continue installation on seeing that I am trying to install a 64bit product on a 32bit system.
Regards,
Michael
Message was edited by:
okmich

Installation of 32 bit and 64 bit Flash on same CPU

I have a 64 bit version of Windows 7 and an installation of a 64 bit IE 9.0 and a 32 bit version of IE 9.0 installed and running simultaneously on the same computer system.
After downloading the latest Flash player, installation went well for my 64 bit version of IE 9.0. I notice that my 32 bit version of IE 9.0 was not updated.
How do I get the 32 bit version installed.

I attached two files. I don't know why they did not make it through the e-mail systems. I will attempt one more time.
Ronald
For 32 bit Flash
C:\Windows\SysWOW64\Macromed\Flash
Flash11f.ocx
FlashInstall.log
FlashUtil10w_Plugin.exe
FlashUtil11e_ActiveX.exe
FlashUtil11f_ActiveX.dll
FlashUtil11f_ActiveX.exe
NPSWF32.dll
Flash11f.ocx
C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerTrust
AdobeXMPFileInfoCS5.cfg
PremiereElements90.cfg
PSStore.cfg
For 64 bit Flash
C:\Windows\System32\Macromed\Flash
Flash64_11_1_102.ocx
FlashInstall.log
FlashUtil64_11_1_102_ActiveX.dll
FlashUtil64_11_1_102_ActiveX.exe

ODI11g Server Installation in Linux64 bit

Hi Experts,
After running the uninstaller for ODI11g installatiion in Linux,getting follwing error.
Checking if CPU speed is above 300 MHz. Actual 3000 MHz Passed
Checking Temp space: must be greater than 300 MB. Actual 1084 MB Passed
Checking swap space: must be greater than 512 MB. Actual 9886 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-11-08_08-05-22PM. Please wait ...
Please specify JDK location ( Ex. /home/jdk ), <location>/bin/java should exist :/weblogic1/wl1032/Oracle/Middleware/jdk160_18
[wl1032@ofscvr0343 Disk1]$ java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-11-08_08-05-22PM/oui/lib/linux64/liboraInstaller.so: /tmp/OraInstall2010-11-08_08-05-22PM/oui/lib/linux64/liboraInstaller.so: wrong ELF class: ELFCLASS64 (Possible cause: architecture word width mismatch)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1803)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1699)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1003)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:402)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
at oracle.as.install.engine.modules.util.GetFreeSpace.getUnixVolumeFreeSpace(GetFreeSpace.java:133)
at oracle.as.install.engine.modules.util.GetFreeSpace.getFreeSpace(GetFreeSpace.java:76)
at oracle.as.install.engine.logging.EngineLogHelper.<init>(EngineLogHelper.java:61)
at oracle.as.install.engine.logging.EngineLogHelper.initialize(EngineLogHelper.java:192)
at oracle.as.install.engine.InstallEngine.<init>(InstallEngine.java:135)
at oracle.as.install.engine.InstallEngine.<clinit>(InstallEngine.java:130)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:476)
Exception in thread "main" java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1734)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1028)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:420)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
at oracle.as.install.engine.modules.util.GetFreeSpace.getUnixVolumeFreeSpace(GetFreeSpace.java:133)
at oracle.as.install.engine.modules.util.GetFreeSpace.getFreeSpace(GetFreeSpace.java:76)
at oracle.as.install.engine.logging.EngineLogHelper.<init>(EngineLogHelper.java:61)
at oracle.as.install.engine.logging.EngineLogHelper.initialize(EngineLogHelper.java:192)
at oracle.as.install.engine.InstallEngine.<init>(InstallEngine.java:135)
at oracle.as.install.engine.InstallEngine.<clinit>(InstallEngine.java:130)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:476)
Please help me,
MNK

see if you are passing the JDK 64 bit for 64 bit ODI .

Issues in installing Oracle 12C on Windows 8 64 bit

I am trying to install Oracle 12C 64 bit on Windows 8. I am getting error on the screen after initial email confirmation. It is regarding some pre-requisite checks not being met. The log does not show much details.
Any idea why I am getting the error?

Which edition on Windows ? http://docs.oracle.com/database/121/NTDBI/reqs.htm#NTDBI2698
Pl post the contents of the install log file - http://docs.oracle.com/database/121/NTDBI/ts.htm#NTDBI2934

Native installer for 64 bit Windows

For various reasons, I need to create an AIR Native Installer that installs as a 64 bit application. I can't find this option when creating a native installer. When I install on Win64 it always insists on installing in the x86 (i.e., 32 bit) "Program Files" folder. How can I make it install in the default Program Files (i.e., the one containinf 64 bit apps).
Some background. I need to make this work with a native code library that talks to hardware (a Kinect, to be specific). When running under Win64, the Kinect driver is 64 bit, and therefore needs a 64 bit app to work with it.
-JM

Hi JM,
You'll need to roll your own installer to get this done. AIR is using MSI to do the installation and it redirects non 64-bit apps to the Program FIles x86 folder.
The good part is we did work in AIR 3 to simplify this process. Here's an ADC article that gives a good overview of the options you have:
Installation and deployment options in AIR 3
Chris

Installation on 32 bit and 64 bit - Issue

Hi All,
We are upgrading from 11.1.2.0 to 11.1.2.2. We have four Hyperion servers. All servers are windows server 2008 R1 SP2 64 bit except one which is 32 bit. On this 32 bit we currently have FDM, ODI, FR Print server, FR Studio and Essbase client. I have downloaded the 64 bit Hyperion installer and when I launch it, I am getting the error
Windows cannot find D:\Hyperion_11122_Installers\jre\win32\1.6.0\bin\javaw.I think it is looking for 32 bit version. Should I download and install 32 bit of these products/Clients particularly for this machine? If I will have to install/configure 32 bit of foundation services on this machine, would it have any compatibility issue with 64 bit of foundation services on the other servers?
The previous installation was done by some other vendor and not sure why they chose the FDM server to be 32 bit.
Regards,
Ragav.

There shouldn't be any issue running FDM on 64bit windows 2008 R2 machine, there used to be more issues in earlier version like 2003 as IIS could not run in both 32bit and 64bit mode.
I know FDM is 32bit but is there any reason to keep the OS 32bit, the print server does not exist anymore in 11.1.2.2, ODI is 64bit.
Though if you are installing on a 32bit then you will need to download all the 32bit components.
If you are using Oracle database then you do need to install both the 32bit and 64bit Oracle client on a 64bit OS
Cheers
John
http://john-goodwin.blogspot.com/

12c EM Installation on 32 bit OEL

Similar Messages

Maybe you are looking for