12c - Listener shows down

I added a host to 12c and it discovered database. Listener shows down. The listener on the host is actually up. 12c is looking for listener.ora file in a specific directory (TSN_ADMIN) but the file is in $TNS_ADMIN/SID_host directory. How do I manually correct the configuration so that the agent knows where the listener.ora file is? I looked everywhere but I can't find a location in 12c where I can put in the location of listener.ora file.
I want to update this target's "LISTENER.ORA Location" parameter with the location of the currently running Listener. How do I do this? Thanks.

>
I want to update this target's "LISTENER.ORA Location" parameter with the location of the currently running Listener. How do I do this?
>
Go to the homepage of the listener target, and select Oracle Listener > Target Setup > Monitoring Configuration. You can then specify an appropriate value in the Listener.ora Directory field.
Regards,
- Loc

Similar Messages

  • External Procedure Listener shows Down when it is Up

    I have a separate listener for our extproc calls. OEM doesn't find a port associated with this listener so it can't ping it and therefore says it is down. Is there some way to get OEM to identify that this listener is up?

    Nicolas,
    Yes I am able to run processes regardless the showing status of prcs ?
    I figured out what the problem is.
    It looks like the Process Schedular ran into a Oracle bug where the uptime of the machine cannot be > 248 days. Although this bug should not affect 10.2.0.4 database.
    It seems to me that PeopleTools 8.22.15 -- Process Scheduler is still affected by it.
    I rebooted my AIX unix server and all started working fine.
    Thanks

  • EM12c Oracle Database Plug-In 12.1.0.7 update now shows 10g listener as down when it's not

    EM 12.1.0.4 with Oracle Database Plug-in 12.1.0.7
    Monitored database and listener:  10.2.0.4
    Our EM12c monitors 12.1,11.2 and 10.2 databases and listeners.  All monitored targets are up and running.
    I updated Oracle Database Plug-in from 12.1.0.6 to 12.1.0.7 and now the only 10g listener that I have shows as down.
    The listener on the server is up and running.
    The monitoring configuration is right.
    I removed this target and re-added it, but it came back as down.
    It's a little disconcerting to have a listener show as down since it's a production box, but nothing I do corrects the problem.
    Any insights or suggestions are appreciated.
    Sherrie

    Hi Sherrie,
    In most cases we have this issue due to monitoring configuration , I know you mentioned that you have checked on it but still I would recommend to just re-confirm on below steps
    1. Go to
        EM Console -> Targets -> Listener -> Listener Home page -> Target Setup -> Monitoring Configuration
    2. Get the details
          Listener Name
          Listener.ora Directory
          Machine Name
          Oracle Home
          TCP Port Numbe
    3. Go to the server where this listener is running
       Check to see if the listener is up
           ps -ef | grep tns
    4. Next run
           $ORACLE_HOME/bin/lsnrctl status
       From this outpuy verify details in (1)
          Listener Name   <======= Alias
          Listener.ora Directory <=== Listener Parameter File ie the directory
          Machine Name  <======= HOST=
          Oracle Home<========== This is where tnslsnr is started from
          TCP Port Number <======  PORT=
    5. Makes sure that all the details matches in (4) and (2)
    If above is fine then I would recommend to go through the troubleshooting steps as per below doc , they are valid for listener status down too and should give a further insight on the root cause of the issue
    Troubleshooting the 'Pending' status for a Listener Target in Enterprise Manager 12c Cloud Control (Doc ID 1546576.1)
    Regards,
    Rahul

  • Listener shows as Down but is actually running

    In 4.0.8.2 Oracle Application Server Manager Enterprise Edition, HTTP Listeners, for the "www", the listener shows as down but is actually running. If I try to stop it, it says it is not running (the IE dialog box pops-up). If I try to start it, it says (in a new small browser window) "OWS-08806: Oracle Web Listener 'www' is already UP and running at pid 0." Since my site is up, I know it is running. However, how can I bring it down?
    null

    Does Oracle moderate these posts at all? Will I only get a reply if I say NT is king, and Apache kicks butt?

  • Status shows "Down" in EM in 10g Home page

    My current Oracle 10g Status on EM Home page shows "DOWN"
    What must I do to change the status to show "UP"? Is this normal? Any suggestions?
    Please can someone help?
    How do I fix this?
    Thanks

    Hi,
    Thank you. Its works...
    Below are the steps...
    Set the ORACLE_HOME and ORACLE_SID environment variables to the ORACLE_HOME and
    SID of the 10G database.
    - Stop the dbconsole using :
    $ cd $ORACLE_HOME/bin
    $ emctl stop dbconsole
    - Re-configure the port used by the dbconsole by running this command :
    $ emca -r
    - In the above command, enter the listener port details as 1522. Enter the database SID and service name.
    Specify the passwords for the sysman, dbsnmp and sys as sysdba users.
    The dbconsole will be started automatically after the configuration has been completed. Access t
    he URL and verify the status of the database.

  • I tries to backed up and storage on iCloud but its just shows down below "Estimating time remaining" but theres no time remaining !!! And i connect to the Wifi already and i buy a storage capacity !!! But its not backing so what should i do in that case !

    I tries to backed up and storage on iCloud but its just shows down below "Estimating time remaining" but theres no time remaining !!! And i connect to the Wifi already and i buy a storage capacity !!! But its not backing so what should i do in that case !!!?    

    Welcome to the Apple Community.
    First check that your device is correctly connected to the wifi/internet (settings > wifi)
    If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
    If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
    Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.

  • Lacp port channel shows down on one 5k

    I got one side of my lacp port channel down.
    the topology is shown but the left side is showing down
    20    Po20(SD)    Eth      LACP      Eth1/5(s)    Eth1/6(s) 
    # sh int port-channel 20
    port-channel20 is down (No operational members)
      Hardware: Port-Channel, address: 547f.eebb.644d (bia 547f.eebb.644d)
      Description: **To-VA-7004**
      MTU 1500 bytes, BW 100000 Kbit, DLY 10 usec
      reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ARPA
      Port mode is trunk
      auto-duplex, 10 Gb/s
      Input flow-control is off, output flow-control is off
      Switchport monitor is off 
      EtherType is 0x8100 
      Members in this channel: Eth1/5, Eth1/6
      Last clearing of "show interface" counters never
      30 seconds input rate 80 bits/sec, 0 packets/sec
      30 seconds output rate 176 bits/sec, 0 packets/sec
      Load-Interval #2: 5 minute (300 seconds)
        input rate 112 bps, 0 pps; output rate 288 bps, 0 pps
      RX
        4286 unicast packets  785765 multicast packets  1493093 broadcast packets
        2283144 input packets  248607161 bytes
        13 jumbo packets  0 storm suppression bytes
        0 runts  0 giants  0 CRC  0 no buffer
        0 input error  0 short frame  0 overrun   0 underrun  0 ignored
        0 watchdog  0 bad etype drop  0 bad proto drop  0 if down drop
        0 input with dribble  0 input discard
        0 Rx pause
      TX
        0 unicast packets  3397636 multicast packets  0 broadcast packets
        3397636 output packets  399463036 bytes
        0 jumbo packets
        0 output errors  0 collision  0 deferred  0 late collision
        0 lost carrier  0 no carrier  0 babble 0 output discard
        0 Tx pause
      2 interface resets
    sh run interface port-channel 20 membership 
    !Command: show running-config interface port-channel20 membership
    !Time: Mon Feb  2 23:04:37 2015
    version 5.1(3)N2(1b)
    interface port-channel20
      description **To-VA-7004**
      switchport mode trunk
      switchport trunk allowed vlan 1,200-202,251
    interface Ethernet1/5
      description **TO-VA-7004-ETH3/45**
      switchport mode trunk
      switchport trunk allowed vlan 1,200-202,251
      channel-group 20 mode active
    interface Ethernet1/6
      description **To-VA-7004-ETH4/46**
      switchport mode trunk
      switchport trunk allowed vlan 1,200-202,251
      channel-group 20 mode active
    but on the right side everything is up, 
    20    Po20(SU)    Eth      LACP      Eth1/5(P)    Eth1/6(P) 

    It seems have a problem on interfaces => 20    Po20(SD)    Eth      LACP      Eth1/5(s)    Eth1/6(s) 
    Can you share us the status about interfaces 1/5 - 6 & 3/45, 4/45 of 7k?
    Do you have configured per Ethernet interfaces or on the Po ?

  • EMGC AdminServer and the listener is down

    I have installed EMGC 11g in a linux machine.The Adminesrver and the listener is down. I have restarted the em as well as the database and the listener, but stil the status is down in the em console.
    any guidance would be helpful.
    thanks

    What is the output of :
    emctl status agent
    emctl status dbconsole
    Regards
    Rajesh

  • CMS in CMC shows "down"/"disabled" but "up" in CCM

    Dear Gurus,
    I have this issue coming up every now and then in my production BOE server. CMS shows as 'disabled' in Servers area in CMC but when I check CCM, it shows as up. I'll enable it and it comes back again. After few days or sometimes even after few weeks, CMS shows down/disabled again in CMC while it is up in CCM.
    Is this something common or I'm some problem here. Can anybody guide me in this matter.

    Hi,
    There are various ways for tracing. This option is mostly useful for optimization or debugging purposes.
    a) Enabling trace through BO_trace.ini
    A sample BO_trace.ini file can be found in the following locations after installing a build:
    C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\Logging\logConfig\BO_trace.ini
    To turn on tracing using the BO_trace.ini file, the "active" setting within the file must be set to "true" (i.e. active=true). And append -traceinipath <path to valid BO_trace.ini file> to any server command line
    Note:
    By default all the log files will be placed in < BO_installer_Dir >\BusinessObjects Enterprise 12.0\logging folder
    Thanks,

  • Why does listener show +ASM1 as BLOCKED

    I did a lsnrctl status on the listener and it showed that +ASM1 status as BLOCKED. Why does listener show ASM instance as blocked? How does the agent connect to ASM instance if it is blocked?
    Thanks

    Hi,
    I assume the ASM entry that you are showing refers to what should be in db_1/network/admin/tnsnames.ora?
    My tnsnames.ora does not have an ASM entry at all, and I am experiencing the same issue as the original poster. Should I add one and restart ?
    Thanks,
    Colm.

  • Fastethernet port showing down down

    Hi guys,
    I have a port on my switch that always shows down.
    #show interfaces fastEthernet 1/0/19
    FastEthernet1/0/19 is down, line protocol is down (notconnect)
      Hardware is Fast Ethernet, address is 001e.f686.dd15 (bia 001e.f686.dd15)
      Description: IP Phone & PC Port
      MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
         reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Keepalive set (10 sec)
      Auto-duplex, Auto-speed, media type is 10/100BaseTX
      input flow-control is off, output flow-control is unsupported
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input 6w3d, output 00:10:24, output hang never
      Last clearing of "show interface" counters never
      Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 15
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 0 bits/sec, 0 packets/sec
         11189035 packets input, 8414542539 bytes, 0 no buffer
         Received 103348 broadcasts (27165 multicasts)
         0 runts, 0 giants, 0 throttles
         1 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 watchdog, 27165 multicast, 0 pause input
         0 input packets with dribble condition detected
    Regards,
    Norman D.

    Hello Norman
    This is saying it even nothing is attached to that port or something physical is wrong -Please check your connections - cabling/sfp's/ ports.
    res
    Paul
    Please don't forget to rate this post if it has been helpful.

  • 806 & iAS listeners showing down after target discovery

    we have EM 10.2.0.1.0 installed and agent installed on server which has 11i EBS.
    It discovers database, 9i listeners, apache, forms etc.
    But 806 listeners and iAS listeners are showing down even if it is running.
    Opened a tar,oracle support says 806 listeners are not supported.
    Did any one come across this type of issue.
    Priya

    Opened a tar,oracle support says 806 listeners are
    not supported.
    Did any one come across this type of issue.
    No. But the information is clear that 806 listeners are not supported

  • I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

    I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

    The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • EMGC_OMS1 shows down after discovery of Weblogic GCDomain

    Hi all,
    I was following the steps in the following blog to reset my weblogic server password.
    http://surachartopun.com/2010/06/reset-password-weblogic-console.html
    After resetting, the GCDomain components (EMGC_ADMINSERVER & EMGC_OMS1) are showing DOWN status.
    The log says that the password was invalid, so i guess the Grid Control is not using the new password to monitor weblogic servers.
    I removed the target and managed to rediscovered it using the new password, but EMGC_ADMINSERVER is showing as UP but the EMGC_OMS1 is showing as DOWN.
    I am confused here, hoping anyone could help me.
    Thanks
    Joel

    What if you change the password back to what it was? Will EMGC_OMS1 be showing UP again?
    Also check MOS note: How to Change the WebLogic Server Administrator Password [ID 1082299.1]
    Eric

  • OEM 12c  Agent does not show down status.

    Hi, I'm testing EM 12c. I added host target to oem and then kill agent process on host.
    When open agent page (Setup-Agent-Testingagent) see error.
    Communication between the Oracle Management Service host to the Agent host is unavailable. Any functions or displayed information requiring this communication link will be unavailable. For example: deleting/configuring targets, uploading metric data, or displaying Agent home page information such as Agent to Management Service Response Time (ms).
    But status agent and host show up in EM.
    I try resync agent, But nothing has changed it.
    ./emctl status agent
    Oracle Enterprise Manager 12c Cloud Control 12.1.0.1.0
    Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
    Agent is Not Running
    Other target (hosts,agent) show status correctly.
    Thanks for help.

    EM is showing Host is up makes sense. If I remember correct the OMS pings the host if the agent is down. This will succeed so the host will show up.
    Why the agent is showing up does not make sense to me. The agent sends a signal every (default) 120 seconds. If no signal is received by the OMS the OMS sends a reverse ping to the agent. If this does not succeed the agent and its monitored targets should get the state “Agent Unreachable”.
    Eric

Maybe you are looking for

  • How can I add check boxes without using the form widget?

    I would like to use check boxes for our facets for our search engine.  You can see an example below.  Is there anyway to do this without using the form widget? PJM - Site Updates

  • Select from table on highest priority

    I have a table, TAB1, which has, amongst others, 2 fields. FIELD1 is a non-unique ID and FIELD2 is a two character code. For example: 123,AA 123,AZ 124,BB 124,BY I also have a second table TAB2 which contains 3 fields. FIELD1 + FIELD2 are two charact

  • Note to Apple

    Just because a post mentions the word J@ilBre@k doesn't mean someone is encouraging others to do it. You actually need to read the post before you delete it vs just scanning for key words.

  • James, your blog instructions have set me free -but have put Sally in a BOX

    James, remember what you told me about making the Magic Frame very very small so that any new additions I plonk into the big picture area of the entry page will not fall through and end up on the blog summary page? Well, I did what you said, and it w

  • Youtube videos are stuttering on safari?

    Hi, When I play youtube videos on safari, it seems to stutter/shake every 1-2 seconds. Audio works fine but video itself is just constantly shaking. When I play videos on other sites (vimeo, dailymotion), it works fine. Only happens on youtube I've r