12c OEM Installation -- adding a OMS node

Hi Experts,
I gone through the steps mentioned in the below document for adding an additional OMS node for the existing OEM with one OMS.
=====================================
Oracle® Enterprise Manager
Cloud Control Basic Installation Guide
12c Release 1 (12.1.0.1)
E22624-12
7 : : Adding Additional Oracle Management Service
=================================
This procedure deals with adding the adding OMS using "Add Additional OMS Deployment Procedure".
My question is , is this the only method we have to add the additional OMS to the OEM 12c ? or do we have any other method to perform this ?
Please let me know if there is any other method other than one mentioned above.

The recommened way to do an additional OMS install is using deploymnet procedure but you can also do an silent OMS install as well , where you have to run all the steps manually on the server.
if you have any security restrictions or audit demands in your environment, or if you are not permitted to use Oracle credentials to log in over the network for installation, then follow these steps to manually install an additional OMS in silent, non-interactive mode.
http://docs.oracle.com/cd/E24628_01/install.121/e24089/appdx_addln_oms.htm#EMADV467

Similar Messages

  • ORA-01017: invalid username/password;  for  Oralce 12c OEM  installation

    Hi Experts,
    Following error Oralce 12c OEM installation ,i have no clue sys user passowrd is correct in response/new_install.rsp file
    [oracle@sdp12 OEM_Packages]$ ./runInstaller -silent -responseFile /oracle/oracle8/OEM_Packages/response/new_install.rsp
    Starting Oracle Universal Installer...
    Checking Temp space: must be greater than 400 MB. Actual 1222 MB Passed
    Checking swap space: must be greater than 150 MB. Actual 4000 MB Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-02-24_06-22-19PM. Please wait ...[oracle8@sdp38 OEM_Packages]$
    ERROR: ERROR:Exception occurred while connecting to database. Check the connection details of the database you specified and retry.
    ORA-01017: invalid username/password; logon denied
    Unable to connect to the database and validate whether it is a supported database due to one of the following reasons:
    (1) Incorrect credentials
    (2) Listener may be down
    (3) Database may be down
    Check the credentials ,the status of the listener and the database and retry.
    i am able to connect using same username password
    [oracle8@sdp38 response]$ sqlplus sys/sys512@TET1
    SQL*Plus: Release 11.2.0.1.0 Production on Sun Feb 24 18:29:15 2013
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL>
    From response/new_install.rsp file
    DATABASE_HOSTNAME=sdp12
    LISTENER_PORT=1521
    SERVICENAME_OR_SID=TET1
    SYS_PASSWORD=sys512
    SYSMAN_PASSWORD=sysman512
    SYSMAN_CONFIRM_PASSWORD=sysman512
    i have no clue here, any help greatly appropriated
    thanks

    few things you can check :
    a) Is there a password file ? Is the password correct in it ?
    b) SYSDBA remote login is disabled. remote_login_passwordfile is not set to EXCLUSIVE in the spfile or init.ora.
    Set: remote_login_passwordfile= EXCLUSIVE
    Create a password file:
    Unix: $
    orapwd file=$ORACLE_HOME/dbs/orapw$ORACLE_SID password=sys entries=5
    Windows:
    C:\> orapwd file=%ORACLE_HOME%\database\pwd%ORACLE_SID% password= sys entries=5
    To synchronize the password for sys for normal connections and connections as sysdba connect as a sysdba user and reset the sys password:
    $ sqlplus "/ as sysdba" SQL> ALTER USER SYS IDENTIFIED BY change_on_install;

  • Silent Installation of Additional OMS 10.2.0.4 with 11.1.0.7 repo fails...

    Followed instructions from the OEM Installation and Basic Configuration guide E10953-04 - Software Only Installation...
    In the section 'Temporary update of the Repository Core Version' I changed the version to 10.2.0.1.0
    When trying to install additional OMS on Linux x86-64 using silent installation... The installer fails with the below message...
    connectString = xxxxx:xxxx:emdb1
    INFO: 1/17/09 1:09:42 AM EST: Query Returned: 11.1.0.7.0
    1/17/09 1:09:43 AM EST: User Selected: S&top installation of this component only.
    1/17/09 1:09:43 AM EST: Invalid version: To be used for the Management Repository, the database must be version 9.2.0.6.0, or version 10.1.0.3.0 or higher.
    1/17/09 1:09:43 AM EST: This silent installation was unsuccessful.
    Any Ideas...

    Directly pointy to 11G database is not supported, you have to go by note 467677.1

  • Stop and Start BI Publisher 12c OEM

    How to stop and start BI Publisher which is installed in 12c OEM. OMS is running on OEL 64 bit.
    I need a help in doing this step by step commands. Wherever i read it says Stop BI Publisher using weblogic Administration console which I don't have an idea...
    Please help on this...

    Please post it in Oracle Database community for better audience and responses.

  • MDS Schema Configuration Failue during OEM installation

    During the OEM installation the set-up stops at MDS Schema Configuration. I see the following exception in the log files :-(
    emmdscreate_2010_08_25_AD_23_11_09_IST.log*
    2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : Oracle Home is C:\Oracle\MiddlewareEM\oms11g
    2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : Trying to set RCU_HOME to C:\Oracle\MiddlewareEM\oms11g
    2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : RCU_HOME is C:\Oracle\MiddlewareEM\oms11g
    2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : Trying to set SCRIPT_HOME to C:\Oracle\MiddlewareEM\oms11g\rcu\integration
    2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : SCRIPT_HOME is C:\Oracle\MiddlewareEM\oms11g\rcu\integration
    2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : Trying to set RCU_LOG_LOCATION to C:\Oracle\MiddlewareEM\oms11g\cfgtoollogs\cfgfw
    2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : RCU_LOG_LOCATION is C:\Oracle\MiddlewareEM\oms11g\sysman\log\schemamanager\m_082510_1057_PM\m_082510_1057_PM.CREATE\
    2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : Trying to set RCU_LOG_NAME to emmds.log
    2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : RCU_LOG_NAME is rcu.log
    2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : Prepare to initialize RCU
    2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : RCU initialized with parameters : -silent -createRepository -compInfoXMLLocation C:\Oracle\MiddlewareEM\oms11g\sysman\emdrep\config\mds\ComponentInfo.xml -storageXMLLocation C:\Oracle\MiddlewareEM\oms11g\sysman\emdrep\config\mds\Storage.xml -connectString (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=WXP-56M33BS.hyd.amer.dell.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl11g))) -dbUser SYS -dbRole sysdba -schemaPrefix SYSMAN -component MDS
    2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : Start rewriting mds.xml
    2010_08_25_AD_23_11_09_IST removePrereqFromMDS : mdsComp.xml[C:\Oracle\MiddlewareEM\oms11g\rcu\integration\mds\mdsComp.xml]
    2010_08_25_AD_23_11_09_IST removePrereqFromMDS : mds.xml[C:\Oracle\MiddlewareEM\oms11g\rcu\integration\mds\mds.xml]
    2010_08_25_AD_23_11_10_IST EMMDSSchemaManager: Info : Finish rewriting mds.xml
    2010_08_25_AD_23_11_10_IST EMMDSSchemaManager: Info : Invoking RCU
    2010_08_25_AD_23_11_12_IST ERROR:MDSoracle.sysman.assistants.rcu.backend.RCUExecutionException: RCU-6090:Skipping Main operation: Failed in Connection step validation
    2010_08_25_AD_23_11_12_IST Parameters are: -silent -createRepository -compInfoXMLLocation C:\Oracle\MiddlewareEM\oms11g\sysman\emdrep\config\mds\ComponentInfo.xml -storageXMLLocation C:\Oracle\MiddlewareEM\oms11g\sysman\emdrep\config\mds\Storage.xml -connectString (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=WXP-56M33BS.hyd.amer.dell.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl11g))) -dbUser SYS -dbRole sysdba -schemaPrefix SYSMAN -component MDS
    emmdscreate.err+
    ERROR:MDSoracle.sysman.assistants.rcu.backend.RCUExecutionException: RCU-6090:Skipping Main operation: Failed in Connection step validation
    oracle.sysman.assistants.rcu.backend.RCUExecutionException: RCU-6090:Skipping Main operation: Failed in Connection step validation
         at oracle.sysman.assistants.rcu.backend.SilentRCUModel.performOperation(SilentRCUModel.java:129)
         at oracle.sysman.assistants.rcu.backend.RCUModel.startOperation(RCUModel.java:268)
         at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:324)
         at oracle.sysman.emdrep.mds.EMMDSSchemaManager.perform(EMMDSSchemaManager.java:230)
         at oracle.sysman.emcp.oms.MDSSchemaConfiguration.perform(MDSSchemaConfiguration.java:66)
         at oracle.sysman.emcp.oms.BaseConfiguration.invoke(BaseConfiguration.java:151)
         at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:540)
         at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:120)
         at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
         at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
    Parameters are: -silent -createRepository -compInfoXMLLocation C:\Oracle\MiddlewareEM\oms11g\sysman\emdrep\config\mds\ComponentInfo.xml -storageXMLLocation C:\Oracle\MiddlewareEM\oms11g\sysman\emdrep\config\mds\Storage.xml -connectString (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=WXP-56M33BS.hyd.amer.dell.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl11g))) -dbUser SYS -dbRole sysdba -schemaPrefix SYSMAN -component MDS
    Request help as I am unable to proceed further from here :-(
    Edited by: user8915544 on Aug 25, 2010 11:31 AM

    ... find some other problems regarding RCU-6090...
    Re: OID 11g installation problem: service name/tnsnames.ora ok?
    There are some suggestions with the global name in the connection descriptor....
    TNS name WXP-56M33BS.hyd.amer.dell.com
    maybe try IP / localhost or hostname....in the tnsnames
    nothing more than a suggestion....
    *T                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Adding additional j2ee node

    Hello,
    we are running BI 7 - abap+java stacks with 16 GB ram (recently added)
    i would like to know what is the thumb rule for adding additional j2ee node?
    when is it neccassary to add additional j2ee node?
    Regards,
    Moshe

    Hi,
    The JLaunch starts a Java program. It loads the JVM into its own address space and then represents the required cluster element. The program can receive notification from the JControl process via named pipes to stop the cluster element, and terminates, if the JControl stops running (fork emulation under Windows).
    So Jlaunch consuming high CPU time means that server, dispatcher or bootstrap process consume it. If there are not enough system or application threads avaliable means that the engine must buffering requests for web application or system processes. Things to check in this case are:
    SAP NOTE 1016241 - J2EE Engine hangs because of unsufficient system threads
    SAP note: 716604  and upgrade JDK.
    SAP note: 723909 -> set correct VM parameters
    and if issue persists, then you will need to analyse the application causing teh leak...
    SAP note: 1259465: Memory analyser.
    Regards,
    Hemanth

  • Adding a third node...

    hello,
    we purchased the license for a 3rd clusternode (sles10.3+oes2sp3).
    Are there any special license related steps with the installation of a third node (activation, registration etc.) or is it just like installing a second node?
    thx,
    hugo

    On 05.12.2011 12:16, susehoush wrote:
    >
    > hello,
    >
    > we purchased the license for a 3rd clusternode (sles10.3+oes2sp3).
    >
    > Are there any special license related steps with the installation of a
    > third node (activation, registration etc.) or is it just like installing
    > a second node?
    The license is pure paper only, no technical steps necessary to use it.
    Just add the third node regularly.
    CU,
    Massimo Rosen
    Novell Knowledge Partner
    No emails please!
    http://www.cfc-it.de

  • Cpu patches for 12c OEM

    Hi,
    Has anyone deployed CPU patches for 12c OEM? In the recent Jul, 2012 CPU patch there is patch for Oracle Database Plug-ins, has anybody deployed this Jul ,2012 CPU patch for 12c OEM.
    Enterprise Manager Plugin for Database 12c Release 1, versions 12.1.0.1, 12.1.0.2 Enterprise Manager
    Thanks
    Amit

    I have requested the "on request" patch for the Oracle Database Management Plug-in for the 12.1.0.1 Home, but was told by Oracle Support that there was no patch. I am on Solaris Sparc 64. I looked at the CVE-2012-1737 advisory, and I am trying to figure out if the vulnerability does not apply to my platform, but frankly can't figure it out from that document, and the support person did not elaborate. Have you been given a patch?
    Regards,
    Peggy

  • Manual of adding the new node on RAC with ASM

    Hello everbody
    Someone have the manual of the adding a new node on RAC with ASM for Solaris ?
    regards
    Spaulonci

    Go to http://www.oracle.com/technology/documentation/index.html, select your unknown database version and search for a manual named 'Oracle Clusterware and Oracle Real Application Clusters Administration and Deployment Guide'.
    Werner

  • Audigy 2 OEM installation probl

    Hi all,
    Basically im here to moan and complain :P
    Bought audigy 2 card from overlcockers.co.uk
    installed into machine, machine recognised new audio control card, cant wait i think to myself whilst i enjoy 24 bit sound rather than crappy realtek 97 on board audio i using.
    Now to get drivers, go to soundblaster.com click on auto update web finds i have the audigy 2 card installed and recomends the right set of drivers.
    go to install them and get error message saying "Setup can not find the required set of components, etc etc", hmmmm i thought to myself.
    Basically i've spent 2 days and roughly 0 hours trying to install drivers all to no succes for this card. Before any of you say try this try that, i have tried EVERYTHING.
    Changed PCI slots, tried different drivers, reformated PC, etc etc. Everything some one has mentioned on a forum i have tried.
    So i emailed creative, "Sorry sir, but you can not get this working without the original installtion CD, we have no working drivers for this card on the website, only updates"
    Great, whats the friggin point of selling an OEM with no CD when you need the CD to get it working?
    Im friggin pissed, if anyone can send me an iso of the cd (which i have found on the net but it downloads at 0k a second and its 566 meg big) can you email me at [email][email protected]][email protected][/url]
    All the forums i've read about this loads of people have had the same problem, its something to do with OEM hardware not having a hardware identifier on it and therefore the web drivers wont recognise the card is installed.
    This thread may get deleted im sure by someone at creative for me swearing in it, but seriously im so unhappy with creative and the audigy 2 oem card i have that i've just got to the point where i dont care,
    VERY UNHAPPY CUSTOMER, i will be really happy if some one at creative does something for me so i can get the soundcard working.

    Thanks guys for responding to my post,
    Ive tried everything that you have mentioned and still have no success, the kx drivers dont seem to have the audigy 2 oem driver (which is the sb0400) and when i try to install the generic driver my machine crashed and reboots with a "windows has recovered from a serious error" message.
    The guide of how to properly install the soundblaster drivers i've already tried to no avail just to find the same "Setup did not find the required set of hardware on your machine" error message.
    Im now sitting in my mates bedroom with my PC set up (having a LAN :P), and tried his audigy oem installation CD and still i get the same error message (just to remind you i have the audigy 2 OEM card, hey it was worth a try)
    Im now at the point where i cant get my hands on an audigy 2 OEM CD as the helpdesk from soundblaster has refered me to my "vendor" and its now the weekened and they arent open till monday.
    To say im furious is a bit of an understatement as i now have to use my realtek 97 onboard sound and has ruined my LAN party.
    Im now contemplating purchasing a retail card from PC World and putting the OEM card back in the box and taking it back to PCWorld for a refund LOL.
    My advice, dont purchase an OEM card PERIOD.

  • Solaris 10.2 OEM Installation: but emctl displays OMS version is 10.1

    Hi,
    How can I validate the correct version of the installation I did. I though Iwas installing OEM GC Solaris 10.2.0.1. Installer said it was 10.2.0.1. I did an OMS and AGENT install all using same software distro and when I run ./emctl in the agent home/bin it says my Agent and OMS are version 10.1.0.1
    --catharine                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    I think the OTN at one time had the wrong software up there but if you saw it install 10.2 then you should have it. Any chance you are grabbing the emctl from another Oracle home?
    Of course you could check with ./runInstaller but how about just looking in /opt/app/oracle/product/agent10g/relnotes ?

  • OMS inatallation is hanging during OEM installation ..

    Hi,
    i am installing Oracle Enterprise Manager (10.2.0.2) in windows 2003. Repository database created successfully.After creating repository database OMS installation is hanging.
    installActions2009-04-21_09-58-22-PM.log
    Oracle Rules Manager 10.2.0.2.0
    Oracle Dynamic Monitoring Service 10.1.2.1.0
    Oracle Universal Installer 10.2.0.2.0
    Oracle One-Off Patch Installer 10.2.0.2.1
    Installer SDK Component 10.2.0.2.0
    Sun JDK 1.4.2.0.8
    Sun JDK extensions 10.1.2.0.0
    Available Free Disk Space: 9 GB
    Total Space Required : 2.0GB
    OMS Home : C:\OracleHomes\oms10g
    Space Required: 1.6GB
    AGENT Home: C:/OracleHomes\agent10g
    Space Required: 0.4GB
    INFO: *** Install Page***
    INFO: FastCopy : File Version is Compatible
    INFO: Install mode is fastcopy mode for component 'oracle.sysman.top.oms' with Install type 'Core'.
    INFO: HomeSetup JRE files in Scratch :584
    INFO: Setting variable 'ROOTSH_LOCATION' to 'C:\OracleHomes\oms10g\root.sh'. Received the value from a code block.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.sysman.top.oms_Core_exp_2.xml'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.sysman.top.oms_Core_filemap.jar'.
    INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.sysman.top.oms_Core_1.xml'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.sysman.top.oms_Core_exp_1.xml'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.sysman.top.oms_Core_2.xml'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.sysman.top.oms_Core_dirs.lst'.
    INFO: Performing fastcopy operations based on the information in the file 'setperms2.sh'.
    INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
    INFO: Number of threads for fast copy :1
    WARNING: This will stop installation of all products and exit the Installer. Are you sure that you want to stop the installation and exit?
    INFO: User Selected: Yes/OK
    oraInstall2009-04-21_09-50-20PM.out
    path: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2009-04-21_09-50-20PM\jre\1.4.2\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
    toload is C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2009-04-21_09-50-20PM\WindowsGPortQueries.dll
    Group could not be added
    User could not be added Administrator 1378
    User could not be added 1378
    oraInstall2009-04-21_09-58-22-PM.err
    Runtime exception during validation of variable :nValidationPortListSelect
    java.lang.NullPointerException
         at Components.oracle.iappserver.iapptop.v10_1_2_0_2.CompContext.validate_nValidationPortListSelect(Unknown Source)
         at Components.oracle.iappserver.iapptop.v10_1_2_0_2.CompContext.validate(Unknown Source)
         at oracle.sysman.oii.oiis.OiisVariable.validate(OiisVariable.java:1409)
         at oracle.sysman.oii.oiis.OiisVariable.validateChildVariables(OiisVariable.java:1836)
         at oracle.sysman.oii.oiis.OiisVariable.setValue(OiisVariable.java:1124)
         at oracle.sysman.oii.oiis.OiisVariable.setValue(OiisVariable.java:1332)
         at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2437)
         at oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:1093)
         at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
         at oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:202)
         at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
         at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3832)
         at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
         at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1277)
         at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
         at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:547)
         at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:935)
         at oracle.sysman.emgc.oneclick.OneClickWizard.runOuiInstaller(OneClickWizard.java:458)
         at oracle.sysman.emgc.oneclick.OneClickDirectory.runInstaller(OneClickDirectory.java:165)
         at oracle.sysman.emgc.oneclick.OneClickInstaller.runInstaller(OneClickInstaller.java:209)
         at oracle.sysman.emgc.oneclick.OneClickInstaller.doCompletion(OneClickInstaller.java:243)
         at oracle.sysman.emgc.oneclick.OneClickInstaller.process(OneClickInstaller.java:269)
         at oracle.sysman.emgc.oneclick.OneStartup.startup(OneStartup.java:369)
         at oracle.sysman.emgc.oneclick.OneArgs.main(OneArgs.java:700)
         at oracle.sysman.emgc.oneclick.OneStartup.main(OneStartup.java:377)
    Runtime exception during validation of variable :nValidationInstanceInfo
    java.lang.NullPointerException
         at Components.oracle.iappserver.iapptop.v10_1_2_0_2.CompContext.validate_nValidationInstanceInfo(Unknown Source)
         at Components.oracle.iappserver.iapptop.v10_1_2_0_2.CompContext.validate(Unknown Source)
         at oracle.sysman.oii.oiis.OiisVariable.validate(OiisVariable.java:1409)
         at oracle.sysman.oii.oiis.OiisVariable.validateChildVariables(OiisVariable.java:1836)
         at oracle.sysman.oii.oiis.OiisVariable.setValue(OiisVariable.java:1124)
         at oracle.sysman.oii.oiis.OiisVariable.setValue(OiisVariable.java:1332)
         at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2437)
         at oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:1093)
         at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
         at oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:202)
         at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
         at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3832)
         at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
         at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1277)
         at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
         at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:547)
         at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:935)
         at oracle.sysman.emgc.oneclick.OneClickWizard.runOuiInstaller(OneClickWizard.java:458)
         at oracle.sysman.emgc.oneclick.OneClickDirectory.runInstaller(OneClickDirectory.java:165)
         at oracle.sysman.emgc.oneclick.OneClickInstaller.runInstaller(OneClickInstaller.java:209)
         at oracle.sysman.emgc.oneclick.OneClickInstaller.doCompletion(OneClickInstaller.java:243)
         at oracle.sysman.emgc.oneclick.OneClickInstaller.process(OneClickInstaller.java:269)
         at oracle.sysman.emgc.oneclick.OneStartup.startup(OneStartup.java:369)
         at oracle.sysman.emgc.oneclick.OneArgs.main(OneArgs.java:700)
         at oracle.sysman.emgc.oneclick.OneStartup.main(OneStartup.java:377)
    java.util.zip.ZipException: invalid entry size (expected 22184444 but got 22184468 bytes)
         at java.util.zip.ZipInputStream.readEnd(Unknown Source)
         at java.util.zip.ZipInputStream.read(Unknown Source)
         at java.io.FilterInputStream.read(Unknown Source)
         at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1423)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:258)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:194)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:143)
         at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:341)
    Thanks,
    Edited by: Mohammed_82 on Apr 22, 2009 2:05 PM

    Hi,
    i am installing Oracle Enterprise Manager (10.2.0.2) in windows 2003. Repository database created successfully.After creating repository database OMS installation is hanging.
    installActions2009-04-21_09-58-22-PM.log
    Oracle Rules Manager 10.2.0.2.0
    Oracle Dynamic Monitoring Service 10.1.2.1.0
    Oracle Universal Installer 10.2.0.2.0
    Oracle One-Off Patch Installer 10.2.0.2.1
    Installer SDK Component 10.2.0.2.0
    Sun JDK 1.4.2.0.8
    Sun JDK extensions 10.1.2.0.0
    Available Free Disk Space: 9 GB
    Total Space Required : 2.0GB
    OMS Home : C:\OracleHomes\oms10g
    Space Required: 1.6GB
    AGENT Home: C:/OracleHomes\agent10g
    Space Required: 0.4GB
    INFO: *** Install Page***
    INFO: FastCopy : File Version is Compatible
    INFO: Install mode is fastcopy mode for component 'oracle.sysman.top.oms' with Install type 'Core'.
    INFO: HomeSetup JRE files in Scratch :584
    INFO: Setting variable 'ROOTSH_LOCATION' to 'C:\OracleHomes\oms10g\root.sh'. Received the value from a code block.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.sysman.top.oms_Core_exp_2.xml'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.sysman.top.oms_Core_filemap.jar'.
    INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.sysman.top.oms_Core_1.xml'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.sysman.top.oms_Core_exp_1.xml'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.sysman.top.oms_Core_2.xml'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.sysman.top.oms_Core_dirs.lst'.
    INFO: Performing fastcopy operations based on the information in the file 'setperms2.sh'.
    INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
    INFO: Number of threads for fast copy :1
    WARNING: This will stop installation of all products and exit the Installer. Are you sure that you want to stop the installation and exit?
    INFO: User Selected: Yes/OK
    oraInstall2009-04-21_09-50-20PM.out
    path: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2009-04-21_09-50-20PM\jre\1.4.2\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
    toload is C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2009-04-21_09-50-20PM\WindowsGPortQueries.dll
    Group could not be added
    User could not be added Administrator 1378
    User could not be added 1378
    oraInstall2009-04-21_09-58-22-PM.err
    Runtime exception during validation of variable :nValidationPortListSelect
    java.lang.NullPointerException
         at Components.oracle.iappserver.iapptop.v10_1_2_0_2.CompContext.validate_nValidationPortListSelect(Unknown Source)
         at Components.oracle.iappserver.iapptop.v10_1_2_0_2.CompContext.validate(Unknown Source)
         at oracle.sysman.oii.oiis.OiisVariable.validate(OiisVariable.java:1409)
         at oracle.sysman.oii.oiis.OiisVariable.validateChildVariables(OiisVariable.java:1836)
         at oracle.sysman.oii.oiis.OiisVariable.setValue(OiisVariable.java:1124)
         at oracle.sysman.oii.oiis.OiisVariable.setValue(OiisVariable.java:1332)
         at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2437)
         at oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:1093)
         at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
         at oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:202)
         at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
         at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3832)
         at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
         at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1277)
         at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
         at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:547)
         at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:935)
         at oracle.sysman.emgc.oneclick.OneClickWizard.runOuiInstaller(OneClickWizard.java:458)
         at oracle.sysman.emgc.oneclick.OneClickDirectory.runInstaller(OneClickDirectory.java:165)
         at oracle.sysman.emgc.oneclick.OneClickInstaller.runInstaller(OneClickInstaller.java:209)
         at oracle.sysman.emgc.oneclick.OneClickInstaller.doCompletion(OneClickInstaller.java:243)
         at oracle.sysman.emgc.oneclick.OneClickInstaller.process(OneClickInstaller.java:269)
         at oracle.sysman.emgc.oneclick.OneStartup.startup(OneStartup.java:369)
         at oracle.sysman.emgc.oneclick.OneArgs.main(OneArgs.java:700)
         at oracle.sysman.emgc.oneclick.OneStartup.main(OneStartup.java:377)
    Runtime exception during validation of variable :nValidationInstanceInfo
    java.lang.NullPointerException
         at Components.oracle.iappserver.iapptop.v10_1_2_0_2.CompContext.validate_nValidationInstanceInfo(Unknown Source)
         at Components.oracle.iappserver.iapptop.v10_1_2_0_2.CompContext.validate(Unknown Source)
         at oracle.sysman.oii.oiis.OiisVariable.validate(OiisVariable.java:1409)
         at oracle.sysman.oii.oiis.OiisVariable.validateChildVariables(OiisVariable.java:1836)
         at oracle.sysman.oii.oiis.OiisVariable.setValue(OiisVariable.java:1124)
         at oracle.sysman.oii.oiis.OiisVariable.setValue(OiisVariable.java:1332)
         at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2437)
         at oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:1093)
         at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
         at oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:202)
         at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
         at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3832)
         at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
         at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1277)
         at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
         at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:547)
         at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:935)
         at oracle.sysman.emgc.oneclick.OneClickWizard.runOuiInstaller(OneClickWizard.java:458)
         at oracle.sysman.emgc.oneclick.OneClickDirectory.runInstaller(OneClickDirectory.java:165)
         at oracle.sysman.emgc.oneclick.OneClickInstaller.runInstaller(OneClickInstaller.java:209)
         at oracle.sysman.emgc.oneclick.OneClickInstaller.doCompletion(OneClickInstaller.java:243)
         at oracle.sysman.emgc.oneclick.OneClickInstaller.process(OneClickInstaller.java:269)
         at oracle.sysman.emgc.oneclick.OneStartup.startup(OneStartup.java:369)
         at oracle.sysman.emgc.oneclick.OneArgs.main(OneArgs.java:700)
         at oracle.sysman.emgc.oneclick.OneStartup.main(OneStartup.java:377)
    java.util.zip.ZipException: invalid entry size (expected 22184444 but got 22184468 bytes)
         at java.util.zip.ZipInputStream.readEnd(Unknown Source)
         at java.util.zip.ZipInputStream.read(Unknown Source)
         at java.io.FilterInputStream.read(Unknown Source)
         at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1423)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:258)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:194)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:143)
         at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:341)
    Thanks,
    Edited by: Mohammed_82 on Apr 22, 2009 2:05 PM

  • GI installation on a single-node cluster error.

    Hello, I am trying to install GI on a single-node cluster (Solaris 10 / Sparc) but the root.sh script fails with the following error (this is not a GI installation for a Standalone Server :
    root@selvac./dev/ASM/OCRVTD_DG # /app/oracle/grid/11.2/root.sh
    Running Oracle 11g root script...
    The following environment variables are set as:
    ORACLE_OWNER= grid
    ORACLE_HOME= /app/oracle/grid/11.2
    Enter the full pathname of the local bin directory: [usr/local/bin]:
    Copying dbhome to /usr/local/bin ...
    Copying oraenv to /usr/local/bin ...
    Copying coraenv to /usr/local/bin ...
    Creating /var/opt/oracle/oratab file...
    Entries will be added to the /var/opt/oracle/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root script.
    Now product-specific root actions will be performed.
    Using configuration parameter file: /app/oracle/grid/11.2/crs/install/crsconfig_params
    Creating trace directory
    LOCAL ADD MODE
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    OLR initialization - successful
    root wallet
    root wallet cert
    root cert export
    peer wallet
    profile reader wallet
    pa wallet
    peer wallet keys
    pa wallet keys
    peer cert request
    pa cert request
    peer cert
    pa cert
    peer root cert TP
    profile reader root cert TP
    pa root cert TP
    peer pa cert TP
    pa peer cert TP
    profile reader pa cert TP
    profile reader peer cert TP
    peer user cert
    pa user cert
    Adding daemon to inittab
    ACFS-9200: Supported
    ACFS-9300: ADVM/ACFS distribution files found.
    ACFS-9312: Existing ADVM/ACFS installation detected.
    ACFS-9314: Removing previous ADVM/ACFS installation.
    ACFS-9315: Previous ADVM/ACFS components successfully removed.
    ACFS-9307: Installing requested ADVM/ACFS software.
    ACFS-9308: Loading installed ADVM/ACFS drivers.
    ACFS-9327: Verifying ADVM/ACFS devices.
    ACFS-9309: ADVM/ACFS installation correctness verified.
    CRS-2672: Attempting to start 'ora.mdnsd' on 'selvac'
    CRS-2676: Start of 'ora.mdnsd' on 'selvac' succeeded
    CRS-2672: Attempting to start 'ora.gpnpd' on 'selvac'
    CRS-2676: Start of 'ora.gpnpd' on 'selvac' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'selvac'
    CRS-2672: Attempting to start 'ora.gipcd' on 'selvac'
    CRS-2676: Start of 'ora.cssdmonitor' on 'selvac' succeeded
    CRS-2676: Start of 'ora.gipcd' on 'selvac' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'selvac'
    CRS-2672: Attempting to start 'ora.diskmon' on 'selvac'
    CRS-2676: Start of 'ora.diskmon' on 'selvac' succeeded
    CRS-2676: Start of 'ora.cssd' on 'selvac' succeeded
    ASM created and started successfully.
    Disk Group OCRVTD_DG created successfully.
    The ora.asm resource is not ONLINE
    Did not succssfully configure and start ASM at /app/oracle/grid/11.2/crs/install/crsconfig_lib.pm line 6465.
    /app/oracle/grid/11.2/perl/bin/perl -I/app/oracle/grid/11.2/perl/lib -I/app/oracle/grid/11.2/crs/install /app/oracle/grid/11.2/crs/install/rootcrs.pl execution failed
    I also found the "PRVF-5150: Path OCRL:DISK1 is not a valid path on all nodes" error but as I have read it is a bug I Ignored it. But...
    I think my ASM_DG OCR and voting is ok, accessible by grid user and 660. It seems ASM does not start or does not start in time.
    Any help is wellcome.
    Thanks in advance.

    Thanks a lot for the hint. I had already checked this doc. but I think it is not the problem. Actually de error ora.asm is not online is not correct. After failing root.sh, ora.asm is ONLINE:
    root@selvac./app/oracle/grid/11.2/bin # ./crsctl check resource ora.asm -init
    root@selvac./app/oracle/grid/11.2/bin # ./crsctl stat resource ora.asm -init
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=ONLINE on selvac
    The last part of the /app/oracle/grid/11.2/cfgtoollogs/crsconfig/rootcrs_selvac.log file reads :
    >
    ASM created and started successfully.
    Disk Group OCRVTD_DG created successfully.
    End Command output2011-04-14 13:24:16: Executing cmd: /app/oracle/grid/11.2/bin/crsctl check resource ora.asm -init
    2011-04-14 13:24:17: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:17: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:17: Checking the status of ora.asm
    2011-04-14 13:24:22: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:22: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:22: Checking the status of ora.asm
    2011-04-14 13:24:27: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:28: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:28: Checking the status of ora.asm
    2011-04-14 13:24:33: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:33: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:33: Checking the status of ora.asm
    2011-04-14 13:24:38: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:38: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:38: Checking the status of ora.asm
    2011-04-14 13:24:43: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:43: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:43: Checking the status of ora.asm
    2011-04-14 13:24:48: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:49: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:49: Checking the status of ora.asm
    2011-04-14 13:24:54: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:54: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:54: Checking the status of ora.asm
    2011-04-14 13:24:59: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:24:59: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:24:59: Checking the status of ora.asm
    2011-04-14 13:25:04: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
    2011-04-14 13:25:04: Command output:
    NAME=ora.asm
    TYPE=ora.asm.type
    TARGET=ONLINE
    STATE=OFFLINE
    End Command output2011-04-14 13:25:04: Checking the status of ora.asm
    2011-04-14 13:25:09: The ora.asm resource is not ONLINE
    2011-04-14 13:25:09: Running as user grid: /app/oracle/grid/11.2/bin/cluutil -ckpt -oraclebase /app/grid -writeckpt -name ROOTCRS_BOOTCFG -state FAIL
    2011-04-14 13:25:09: s_run_as_user2: Running /bin/su grid -c ' /app/oracle/grid/11.2/bin/cluutil -ckpt -oraclebase /app/grid -writeckpt -name ROOTCRS_BOOTCFG -state FAIL '
    2011-04-14 13:25:10: Removing file /var/tmp/mbahSaGPn
    2011-04-14 13:25:10: Successfully removed file: /var/tmp/mbahSaGPn
    2011-04-14 13:25:10: /bin/su successfully executed
    2011-04-14 13:25:10: Succeeded in writing the checkpoint:'ROOTCRS_BOOTCFG' with status:FAIL
    2011-04-14 13:25:10: ###### Begin DIE Stack Trace ######
    2011-04-14 13:25:10: Package File Line Calling
    2011-04-14 13:25:10: --------------- -------------------- ---- ----------
    2011-04-14 13:25:10: 1: main rootcrs.pl 322 crsconfig_lib::dietrap
    2011-04-14 13:25:10: 2: crsconfig_lib crsconfig_lib.pm 6465 main::__ANON__
    2011-04-14 13:25:10: 3: crsconfig_lib crsconfig_lib.pm 6390 crsconfig_lib::perform_initial_config
    2011-04-14 13:25:10: 4: main rootcrs.pl 671 crsconfig_lib::perform_init_config
    2011-04-14 13:25:10: ####### End DIE Stack Trace #######
    2011-04-14 13:25:10: 'ROOTCRS_BOOTCFG' checkpoint has failed
    So this must be a bug. During root.sh execution ora.asm is OFFLINE but after failing it is ONLINE. It maight be a question of waiting/repeating or timeout as I see the "Checking the status of ora.asm" command is repeated several times during root.sh, but not enough perhaps. Now root.sh is failed, installation halted but ASM is ONLINE.
    Any other Idea?
    Thanks again.

  • OEM 2.2 not discovering nodes

    Between the space of 2 days, OEM has chosen to not
    refresh/drop/discover any nodes. It tries to but stalls out
    at "Discovery Wizard, step 2 of 2: Progress" at 96%. It is 96%
    for all nodes, remote and local. If allowed to sit long enough,
    the OMS service will shutdown. Is it possible to force manual
    configuration of the nodes without going thru the Discovery
    Wizard first?

    Hi
    I am not aware whether you can force manual discovery without
    going through Discover Nodes process. You can, however, stop the
    agent and do discovery. This might (I hope) expedite the
    discovery process and lead you to manual discovery quickly.
    BTW with a manual discovery you lose major functionality of OEM
    sarath

  • Invalid Stored block length - Error Oracle 12c DB installation in OEL6

    Hi Guys,
    I got the below error message during the installation on Oracle 12c DB in OEL6.
    "Invalid Stored Block Length". And the installation got terminated.
    All the pre-req got passed and now i got sucked at this step.
    Can someone help me on this please.....
    Thanks,
    Sunil

    Here is the Error Log
    INFO: Extracting files to '/u01/app/oracle/product/12.1.0/db_1'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_dirs.lst'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_filemap.jar'.
    INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_exp_1.xml'.
    INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_1.xml'.
    INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
    INFO: Number of threads for fast copy :1
    INFO: invalid stored block lengths
    SEVERE: oracle.sysman.oii.oiif.oiifb.OiifbEndIterateException: invalid stored block lengths
      at oracle.sysman.oii.oiic.OiicInstallAPISession.doOperation(OiicInstallAPISession.java:490)
      at oracle.sysman.oii.oiic.OiicAPIInstaller.doOperation(OiicAPIInstaller.java:1009)
      at oracle.sysman.oii.oiic.OiicAPIInstaller.doOperation(OiicAPIInstaller.java:970)
      at oracle.install.driver.oui.OUISetupDriver.setup(OUISetupDriver.java:358)
      at oracle.install.driver.oui.SetupJob.call(SetupJob.java:315)
      at oracle.install.driver.oui.SetupJob.call(SetupJob.java:49)
      at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
      at java.util.concurrent.FutureTask.run(FutureTask.java:138)
      at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
      at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
      at java.lang.Thread.run(Thread.java:662)
    INFO: Update the state machine to STATE_READY
    INFO: isSuccessfullInstallation: false
    INFO: isSuccessfullRemoteInstallation: true
    INFO: Adding ExitStatus FAILURE to the exit status set
    INFO: Shutting down OUISetupDriver.JobExecutorThread
    SEVERE: [FATAL] invalid stored block lengths
       CAUSE: No additional information available.
       ACTION: Refer to the logs or contact Oracle Support Services
       SUMMARY:
           - invalid stored block lengths.
    Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:7314
    INFO: Advice is ABORT
    SEVERE: Unconditional Exit
    INFO: Adding ExitStatus FAILURE to the exit status set
    INFO: Dispose the current Session instance
    INFO: Dispose the install area control object
    INFO: Update the state machine to STATE_CLEAN
    INFO: Finding the most appropriate exit status for the current application
    INFO: Exit Status is -1
    INFO: Shutdown Oracle Database 12c Release 1 Installer

Maybe you are looking for

  • Macbook Video Importing Problem with Audio

    I am trying to import videos to my macbook from my video camera in .mpg format (which i have done hundreds of times) and for some reason the audio will not play on the videos. The video imports fine except for no sound. I have no idea why this is doi

  • Help! Hard Drive Does Not Slide Back In!!

    Hi there, After much troubleshooting, I've come to the semi-conclusion that my upgraded 2-year old hard drive (Hitachi Travelstar) has failed. Luckily - I have been keeping a cloned external drive that is the same exact size as my internal one. Howev

  • HT3529 How can i send and receive text messages with pictures?

    The camera button on the text screen won't let me send pictures. And I also can't recieve pictures.

  • No text in iDVD

    I created a project in iMovie '11 (720p) and then share to media browser.  After completion I opened up iDVD, went to OneStep DVD From Movie under File. After burning the DVD everything was fine except for the opening page.  The title (text) was miss

  • SAX Qns

    the following codes will print out my whole XML document. Is there any way to print a selected item from the xml file? import javax.xml.parsers.*; import org.xml.sax.*; import org.xml.sax.helpers.*; public class Parse{      public static void main(St