12inch PB, real low signal. How to install 10.4.1 kext files?

Noticed a problem when my girlfriend new Dell can pickup about 11 access points- all with kinda low signal but my Powerbook does not see ANY of them, once in a while it might pick one up for a second, but then it is gone.
I know this is a documented issue with low signal. I downloaded the 10.4.1 drivers (kext files) to install thinking this might solve the issue as it has for several others. Wondering how to install these files though, there are two AppleAirPort.kext and AppleAirPort2.kext. I also want to know what files to backup should there be an issue, or I want to go back? Any help would be awesome!

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

Similar Messages

Low Signal Strneght after installing 6.0.2 update

Hi,
I am recieving low signal strneght after installing 6.0.2 update.Any fixes ? or anybody

Oops I meant cellular w/o the data.
You can try doing a reset, hold down the home/power button together until you see the apple logo and then release, then wait for the phone to boot back up.
if that doesn't help then try - settings - general - reset - reset network settings.
if that doesn't help, then contact your phone carrier and see if they can help.

How to install leopard from a DMG file instead of DVD

How to install leopard from a DMG file instead of DVD, When i open this file, click restart, NOTHING happened!!!!!!

Use Disk Utility to restore the DMG to a blank partition, then use the Startup Disk preferences pane to reboot from that partition. Why not just install from the DVD, though?

How to install a Application in *.jar file format?

How to install a Application in *.jar file format?
I have taken the *.jar file into the device into media folder. but device is not recognizing the file format
could some one plz provide some suggestion to proceed with this?
Thanks
Mohamed Javeed

I'm having the same problem. I've put .jar into the 'system' folder but that doesn't seem to make the program work neverless see it on my device. Help.

How to install and verify the license file on ASA 5512-x

Hi Friends,
How to install and verify the license file on ASA 5512-x Firewall. I have lincese pak for CX and web security essential.
What need to be done? can i install this lic file on firewall or need to be install on CX server. Because i dont have the CX server right now.
Please share me document for installation of this license.
thx
Ashish Kumar

Hi,
one possible solution is to use an intermediate array. The intermediate array should be used in the user interface. When new data is entered the VI should read each element and then compare to the elements in the stored array. If all elements are different then update the array, otherwise display a fault message.
You could use asequence activated when the Enter button is pressed. In the first frame you would compare the First array with the stored array. it is probably best to use a Boolean indicator to show if the data is valid Make sure you declare this as a local variable.
With the sequence you can perform the comparisons in several seperate frames or in one frame with a OR to link the results. For large numbers of comparisons I prefer to use m
ultiple frames because otherwise the screen becomes a maze of wires and other programmers who may need to maintain the code in the future will find it hard to follow a single frame.
Once all the data items have been compared then the following sequence should contain a CASE statement of type True/False. Link a readable copy of your local variable to the selector of this statement. Then in the FALSE case (Assuming you have linked the boolean to be false when no data is duplicated) copy the new array to the stored array. In the TRUE case bring up an error message.
So long as your arrays are not too large and you do not use this technique in too many places in your code the processor overhead should not be badly affected. For frequent use of such a caomparison in several VIs you may want to create a dedicated subVI for the task. For very large arrays you should seek a different solution.
Hope that helps a bit.
Good luck,
Shaf

How can I find .plist and .kext files?

How can I find .plist and .kext files which are corrupt and need to be deleted before restarting and reloading applications)? Where are they hidden? How do I make them visible?
/hezet

Thank you Eric and Lanny for your answers!
I was confused as the files could neither be found by Spotlight nor by the search field in the upper right corner of the Finder windows (why??), but I have located them now. The files were:
AppleUSBEthernetHost.kext The name appeared in i a warning window now and then.
The .plist files were reported red (failed) by EtreCheck:
com.apple.CSConfigDotMacCert-***@me.com-SharedServices.Agent.plist
com.adobe.SwitchBoard.
com.apple.netauth.sysagent.plist
I have deleted all four files and restarted the computer. Now there are no items in red in EtreCheck, but none of the deleted files has been replaced after restart.
So far the computer seems to work well. What action do you consider appropriate now?
/hezet

How to install and start the adapter(FILE)

hi,
when i checked in RWB for the adapters which are INSTALLED and STARTED adapters it's displaying all adapters except FILE adapter .
I need to known whether this adpater is installed or installed and started ,if the case then how to install and start the adapter

Hi Nandan,
if above is the case as i mentioned in previous response then,
You need to download the latest SAP BASIS 6.40 or 7.0 ".tpz file" (as per you service pack) from service.sap.com. Then you need to put this in the import directory:
<b>\usr\sap\<your system-id>\SYS\global\xi\repository_server\import\importedFiles</b>
Now go to
<b>IR>Tools>Import design Objects, you will find the .tpz file which you down loaded. Import this and refresh your cache.</b>
P.S This is the exact path in market placehttps://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
Regards,
Sarvesh

How to install OpenGL header and library files

I install gtkglext from its source code and get an error after the 'configure' command.
bash-3.00$ ./configure
checking GL/glx.h usability... no
checking GL/glx.h presence... no
checking for GL/glx.h... no
configure: error: Cannot find GLX header
I guess the OpenGL files are not installed during Solaris 10 installation. Could someone tell me where can I get opengl files? Are they in the Solaris 10 installation disks? How to install opengl files?

It's hard to believe that no one here (official Sun
developer network) can answer my question. Maybe few
people develop under Solaris.That must be it.

Dunno.how to install the antivirus and zip file...

Hi..... I already bought a blackberry playbook...just now I want to install the antivirus and zip software,but it says the software is not support by the currently device...so how to solve this problem..and can you show the link to install this two software.... Thanx

There are no known viruses for the BlackBerry devices, therefore there is no Antivirus software available or required.

How to install two or more exe files in a single set up ?

hi
I want to make a setup (deployment project ) using visual studio 2010. my requirement is to install a third party software before installing my windows form setup application. how can I manage the setup creation process ?

Hi jagabandhu Patro,
According to your description, you'd like to add your own custom prerequisite to winforms setup application.
I suggest you using Bootstrapper Package to manage the prerequisites.
You could get the steps about how to use Bootstrapper in the following articles
https://msdn.microsoft.com/en-us/library/ee726596.aspx.
https://msdn.microsoft.com/en-us/library/ms165429%28printer%29.aspx?f=255&MSPPError=-2147217396
http://www.codeproject.com/Articles/15863/Add-your-own-custom-prerequisite-to-quot-ClickOnce
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to install Logic Pro X additional files to a secondary hard drive?

Hi all, I have tried and failed to install additional Logic Pro X data to my second hard drive. The SSD that OS X runs through is almost full and I don't have enough space for the files to stay there.
I have tried to use the 'Symbolic Link' solution, but to no avail as it continues to install the software on my SSD! I can tell, because after installing the files I lose a big chunk of storage on the SSD.
Please help! Is there an alternate solution, am I doing it wrong?

Sorry! I did select Logic Pro... Wonder why that happened.... Thanks

How to install .lst and .afm font files on Windows?

Sorry if this has been answered before but I couldn't find it.
My university tutor gave me a few font files in the form of .lst and .afm I assume these are the types of files you get when you package InDesign documents.
I'm just wondering if there's anyway to integrate it into Windows because changing the file format to .ttf or .otf doesn't seem to help.
Thanks in advance.

Thanks for the reply. The other files I got with the .afm's and .lst's were very small files, not even 1KB, compared to the 16KB .afm's. I think the files she's given me haven't been exported properly/all the data isn't there.
Anyway, thanks again for the help. I'll be able to keep what you've said in mind for any other issues.

How To Install Razor

I have noticed that there is a lot of interest but no real posting on how to install Razor2 on OS X Server (10.4). After a little searching, I found a couple of excellent sources. The primary source of info is the following URL:
http://greg.agiletortoise.com/category/technology/mac-os-x-server/
This is what I did and it seems to work so far:
Step 1: Download Razor2
-go to http://razor.sourceforge.net/
-download both razor-agents and razor-agents-sdk
Then follow the installation instructions at the following link:
http://razor.sourceforge.net/docs/install.php
(In my case, I used the CPAN alternative to installing the razor-agents-sdk. This is indicated in the installation link above)
Step 2: Integration with Spamassassin
-as per the link at agiletortoise (above), I edited /etc/mail/spamassassin/local.cf to have the following lines:
use_razor2 1
razor_timeout 10
score RAZOR2CF_RANGE_51100 4.0
Step 3: Restart Server
-sudo serveradmin stop mail
-sudo serveradmin start mail
After doing all of these, razor2 integration seems to work.
I am posting this to see if anyone has a different experience and maybe commenting on any limitations using this technique.
Thanks

At one time I used Razor. Now I do not.
You are really far better off configuring postfix to do a better job of rejecting spam rather than accepting spam first and then filtering it.
Please see the discussion here:
http://discussions.apple.com/thread.jspa?messageID=2851292
As well,
http://www.postfix.org/docs.html
the section "UCE/Virus"
in particular
http://jimsun.linxnet.com/misc/postfix-anti-UCE.txt
the "For 2.x versions"
Pterobyte has an excellent write-up on this as well, perhaps he'll post a link to it (I prefer to leave that up to him )

I lost my photoshop cs5 instaler but ihave the serial number, how ican instal the program again

I lost my photoshop cs5 instaler but ihave the serial number, how ican instal the program again

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

[CLOSED] how to install cleanq2 for quake 2

Hello all,
I'm would like to install Quake 2, I know I could use Wine, but I would like to install it natively. I saw a post here:
http://bbs.archlinux.org/viewtopic.php?id=99025
and they mention cleanq2. I checked out the link to the code page, but could not find directions on how to install it or even the files to install.
Is cleanq2 the better way to go? I'm just looking for a little nostalgia and would be happy with the original quake 2.
--nixIT
Last edited by nixIT (2011-11-12 03:15:49)

Just try Jake2, it runs fine !

12inch PB, real low signal. How to install 10.4.1 kext files?

Similar Messages

Maybe you are looking for