13.0.1.1 update - Version number not changed

Hi,
I downloaded and installed the 13.0.1.1 patch for PS Windows but the about box still shows version 13.0.1. Did something go wrong or is this normal?
Morevoer, contrary to what is announced in the forum header message, using the Help | Updates menu doesn't trigger any update. The 13.0.1.1 update is only available from the Security certificates updates page.

Moral of the story:  People care about the details. 
For those basing their livelihood on Adobe products, the ability to manage what's installed and when it's installed carefully is more than an idle curiosity.
Yes, I understand that Adobe feels they take on additional risk by rebuilding everything.  Adobe, you should work to minimize that, so that you can be confident in your build processes.
My advice is to not take shortcuts in the future.
-Noel

Similar Messages

  • In sales quotation document number not changed..

    hiii guys
    i getting some problem in sales quotation about document number.....
    actually i opened by another user like sham.he is sales department..he have only sales authorizations..when we press add button, data has been saved..but number not changed... but after saving,we close form and open again then that that time number automatically changed..its comes serial number..when we press add button,,we getting same problem...

    hi
    I think you got confused with document and draft no on Approval documents.
    Ofcourse many user,got this confusion.
    The Document number wont be generated in Sales Quotation till you add it(i.e when waiting for approval)
    The document number which is shown in  that document when pending for the approval, is not the finalised number.
    Its just the next number of sales quotaion which wont get stored in sales quotation,rather it will store in Draft table ODRF.
    when you have too many documents which is waiting for approval,you can notice that document number will be same for all the other documents.
    So you note down the Draft Number which is UNIQUE.
    For Ex:
    you are creating sales quotation which has the document number as '335'.
    so when you sending it for approval the draft number will be staored as '211'.
    after getting the approval,when you add it,document number will be generated as '337' because two documents were posted when the draft no:211 is waiting for approval.
    revert me for any clarification.
    Edited by: kambadasan on Feb 23, 2012 1:41 PM

  • PO Version Number not available in PO List displays (ME2L, ME2K, etc)

    I have configured PO Version Management. My PO's are working as desired with proper output.
    However, the PO Version Number is not displayed in my PO List Display tcodes (ME2L, ME2K, etc) nor is it available to add to the layout.  I have configured the Scope of List for "BEST" (PO's) to include change documents. However, there is nothing when I go to ME2L for a PO that has 15 versions. I have verified that EKKO does contain the latest version number for this PO.
    Have I missed a config step??

    Thank you - I did post in MM once I realized I posted in SRM.
    I realize that only the current version is displayed in these transactions. But I need to see the actual version number - no the history - just the current version number. We use these reports to supply our Internal Auditors with PO Data and they require to see the PO # and Version # without having to actually pull up each PO individually in the system.
    I had assumed that since they use EKKO and EKKO contains REVNO that REVNO would be available in my layout and I could simply add it to the report. However, this is not the case.
    Thanks,
    Tonia

  • Xcelsius 2008 Version/Build Number not Changing

    Hi All - quick question.
    I have applied all SP/HF's in order and my build number is still reading as this in the help section:
    Xcelsius Version 5.1.1.0
    Build Number 12,1,1,344
    I did not encounter any erorrs when installing the SP/HF's.  Has anyone else encoutnered this problem?

    Hi Micheal,
        Goto > Control Panels > Add / Remove programs. and check whether all the service packs and hot fixes are listing there?
    Also goto the installation path and right click on Xcelsius.exe and see what is the version number and build number for your xcelsius.
    Regards,
    Vinay

  • Wehn I update the app the version does not change on "about Numbers"

    When I update apps such as Numbers, pages, keynote through the app store the updates seem to work but when I then open the app and look in "about" the version is not updated.

    Hi John,
    The update did not replace the old versions. They were moved to a folder called iWork '09 inside your Applications folder. The new versions are inside your Applications folder (not a sub-folder).
    The icons on your Dock were not replaced. They continue to point to the old versions.
    From your Applications folder, drag the new icons to your Dock. They will become aliases. On my Dock I have icons for Numbers 2 and Numbers 3. Both will run happily together.
    Numbers 2.3 on the left (three column graph)
    Numbers 3.2 on the right (four column graph)
    Regards,
    Ian.

  • WRT54G Version number not shown on sticker underneath the device?

    Hi All,
    First post.. I had looked through the FAQ w/o any answers.
    I have had my WRT54G for at least 3 years and had previously upgraded my firmware to 4.20.7.. just wanted to upgrade it again to 4.21.1 but acutally did not realize which version of the firmware I last used. Looking at the sticker underneath the device, it only shows WRT54G but does not show a version number... are there any other places where the version number is shown? I looked all over but was unable to do so.
    I supposed my version must be the "earlier" ones... are they "bad" consequences for flashing the wrong version number's firmware?
    Thank you all in advance.

    If it does'nt have a version with the model number of your router...then it is a version 1.... you can also verify this by the serial number....you can lookup wikipedia and find WRT54G there....they have a listing of these serial numbers with corresponding version numbers....but if you can see now that it does not have a version, pretty sure its a version 1....
    "You tried your best and you failed miserably! "

  • HT1600 Update version 6 not available in Canada?

    After turning on AppleTv 3, it said update available and started to download something. After about 20 min. a message came saying update failed.
    Checked under Software Update in General, it said Software up to date, however checking the software version # revealed #5.xx.
    What gives?
    I guess the latest update (# 6) is not available in Canada

    It's more to do with the fact that the 6.0 update has been made unavailable due to some issues some users have experienced. I gather then, that in-between your ATV telling you there was an update available, and you trying to download it, the update had been withdrawn temporarily. Don't worry about it, carry on, as you were. When it next notifies you that there's an update available - wait. Wait a while before updating. Check this forum to see if there are any reported problems before making your next move.

  • I have been trying to download a new update and it goes thru the strokes and restarts but the update version does not show when I go to "about this computer" to see what version is on.  Any ideas what is wrong?

    I have been trying to download an update on my MacBook Air and it goes thru the process and restarts but the update does not load.  I know it is not loading because when I go to " About this computer" the version does not show it updated.  Any help would be appreciated.  Thanks

    trying to download an update
    v10.6.8 is as far as Snow Leopard can be updated.
    Which update are you trying to install ??

  • Successful download of Lightroom CC, but icon for this updated version does not appear on desktop.  How do I access the installed current version of Lightroom CC?

    Repeat:  I successfully downloaded the Lightroom CC application, and the updated version of Photoshop.  However, a Lightroom CC icon never appeared on my Mac laptop pro, and I am apparently unable to access the Lightroom CC application.   The updated (current version) of Photoshop and icon did appear on the desktop.  How do I access Lightroom CC??

    Hi
    Find the Application and create a desktop shortcut to Lightroom CC
    How to Make Desktop Shortcuts on Mac - OS X Tips - LAPTOP

  • PAC code provided, number not changed

    Yesterday I provided a PAC code at around 17:00, and I have had no notification that my number has changed or the process has even begun? any help appreciated!!

    It could be any time the following working day, but if you missed the 17:30 deadline it will be a further working day.

  • System MP's version number not increased with Update Rollup installation?

    Hello experts,
    We just ran a quick compare of MP versions between our 3 SCSM environments (dev/QA/production), and found that 1 of the environments (dev) has several "system" MP's which do not match the version of the same MP in the other 2 environments
    (QA/prod).  All 3 environments are SCSM R2 UR4 (and we can see UR4 is installed in Windows' Installed Updates panel).
    In the problem environment (dev), the following MP's do not match the version of the same MP in the other 2 environments.  In all cases, we see 7.5.3079.236  as the version in the other 2 environments, while in the dev environment
    we see either 7.5.3079.0 or 7.5.3079.61.
    Service Manager Console Management Pack
    Service Manager Change Management Library
    Service Manager SLA Management Library
    Service Manager Knowledge Management Library
    Service Manager Service Catalog Library
    Service Manager Library Management Pack
    Service Manager Service Request Library
    Service Manager Data Warehouse Library
    Service Manager Activity Management Library
    Service Manager Release Management Library
    Service Manager Administration Management Pack
    Microsoft System Center Announcements Library
    Any ideas as to what might cause this anomaly?  We're pretty certain UR4 (and preceding UR's) were installed successfully!
    Thanks!

    You could check the install log. It is found in %appdata%/../Local/Temp (on the prim. management server) and file starts with SCSM2012R2_CU_.... (rather large file). From what I can garther it doesn't state importing those specifik management packs, but
    rather MP bundles where my best bet is that Service Manager Console Management Pack is contained in F_Console.mpb. Then look at the end of the line if it says Final State = Install (search the file for .mpb). Let us know what you find.
    http://codebeaver.blogspot.dk/

  • FCP update - serial number not valid

    Hi all, I recently bought final cut studio 2.0 from someone second hand.
    I am trying to download the update but when it asks for my serial number, it says it is not valid. I've tried several times and double checked the information entered.
    Is there any way around it? Or is it because it is a second hand copy?

    If you had FCS already installed prior to the update, and it was working, and after the update you were required to reenter the serial, then it definitely sounds like you have a pirated serial. I can't remember which update, but a couple months ago Apple released an update that invalidated any serial it knew was floating around the net. If you have a valid serial (not on the list of pirated keys), you would not have seen the enter license window.
    When you bought FCS, you should have been given EVERYTHING that normally comes in the package: Shipping Box, manuals, install DVDs with the serial number on the front of the "Installing Your Software" manual/insert. There will be no document for you to copy and paste from.
    If you have one of the serials that was released to the wild, contact Apple and tell them what happened. If you fax them the cover of the install manual, proving you have a legit copy, they will give you a new, valid number.
    Buying 2nd hand from e-Bay or such, has been know to result in exactly this kind of problem.
    In the mean time, you will have to downgrade the version of your install (preferably by reinstalling from the DVDs), but first deleting ANY and ALL FCS folders and files.
    My condolences..
    Good Luck
    Gary

  • Batch Rename... how do I keep the version number [NOT the version name]?

    Hi!
    I've finally made up my mind about renaming my img. names in Aperture, and I would like to have something like "Travel San Francisco 2005 version x 1.CR2", where "version x" is the number which Aperture automatically adds whenever I make a change to an image. This is then followed by a number which automatically increases by one for every new image: 1, 2, 3, 4... etc. until there are no more images to choose from in the current project.
    My problem is that I cannot figure out how to get Aperture to keep the, for me, very helpful "version 1, 2, ..." info attached to the images during renaming. In the Batch rename dialog box I am able to choose "Version Name" but that only gives me the current name of the selected image which I do not want. Aperture just replaces the "version x" in the image name.
    Can anyone help me, or am I asking for something that cannot be done in Aperture?
    Kind regards
    Heine
    DP 2GHz G5   Mac OS X (10.4.7)   3G Memory, BlueTooth, Aiport, 20" Cinema Display

    HI, there:
    I like answering these easy ones. Too often the questions regarding Aperture can't be solved as of yet becasue it's a bug or a lacking feature.
    Anyway, when you import your files, look for the sidebar that has all the options on it. Look for a spot that says "Name Format." When you get there, there should be a drop down menu that will allow you to choose a variety of options. One of the options is "custom name with counter." Aperture will automatically assign each image a custom name and a numerical number starting with 1 and incrementing by 1 for a maximum of 999. You can change the options for this by selecting "edit" from the drop down menu.
    Cheers

  • Can't Download Updates: Serial Number not working

    Hi all,
    I'm hoping someone from Apple might read this- don't know where else to go to ask...
    I am new to FCP....just beginning to understand and use the program after having installed it many months ago. The software was a gift from a friend who wasn't using it... FCP 5.1.4 and early versions of Motion, Soundtrack Pro, Cinema Tools, etc. It's all legal, and my good friend who gave it to me is a very ethical person...everything came in the original box, original packaging, Apple discs, etc.....no copies of anything.
    I remember when I first installed it I had some issues with the serial number, and there seemed to be two different serial numbers...one on the install discs and another on some other stickers that were on the manual or in the box...
    The problem is that I'm out of the US right now and only have the discs- and the box and Manuals are back in the states in storage.
    Now that I am finally understanding the program and getting turned on to do cool things with it, it occurred to me to go looking for any reliable free-stuff I could find for it...and so I first went to Apple to look for updates and plugins.
    When I enter the serial number on the install discs (which is the same one that comes up in "About Final Cut Pro") the Apple site tells me it's an invalid serial number. I triple-checked whether I made any mistakes...so I know I typed everything in exactly as it is on the disc sticker.
    I know the software is legitimate- but the other serial number which I think helped me register the software in the first place is many thousands of miles away from me....
    Any suggestions? Other than that, why would this stuff have more than one serial number anyway?
    Finally, if You are aware of any worthwhile free stuff for FCP, let me know!
    Thanks so much,
    scott

    5.1.4 is as high is that version went. The next version was 6.0 (part of Final Cut Studio 2), and that was a paid upgrade. We are now on FCP 7 (Final Cut Studio 3).
    and there seemed to be two different serial numbers...one on the install discs and another on some other stickers that were on the manual or in the box...
    The ones on the disk? There aren't any on the disk. The real serial numbers are the ones on a sheet with the manuals.
    But, you are as high as you can go...so no need for updating.
    Shane

  • Update Version-Number in -app.xml on release Build

    Hi, developing and deploying apps on an iOS device can be very annoying if you have data stored on your device. The only way to update an app is to increase the serial number before you build manually and then build it - if you forgot you could not deploy your app by synchronization - you have to start your build again. So why could the build-task not just increase (optionally) the build number automatically - this would be a great help for everybody developing iOS apps.
    I know this can be done by building by ant - but why using ant if it is possible in flash builder directly...

    Hi ,
    I have logged a ECR for the issue:
    Bug ID  : http://bugs.adobe.com/jira/browse/FB-33505
    Thanks,
    Sanjay

Maybe you are looking for