13-inch, Late 2011 macbook pro i7 does not have option to turn mirroring on

In the display preferences there is no option to turn mirroring if available, can anyone help.
I can stream through itunes so I know my apple TV is accessible.
Can anyone help?

Welcome to the Apple Community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
if your profile is correct, you need to update your operating system.

Similar Messages

  • 13-inch, Late 2011 Macbook Pro and Thunderbold Display...

    Hello Dear Users,
    First I wish you have a nice new year with full of health, happiness and wealth, then i am asking my question:
    I am using a 13-inch, Late 2011 MacBook Pro having
    Processor  2,8 GHz Intel Core i7 2 cores+2 HTs
    Memory  16 GB 1333 MHz DDR3
    Graphics  Intel HD Graphics 3000 512 MB
    Software  OS X 10.9.1 (13B42)
    specifications, setup with double Thunderbold Displays.
    I sometimes feel that mac's display performance is marvelous and sometimes I feel like I am looking at an old school, blury screen. Is there anybody feels like I feel. I have doubts about screen performance. Well I searched on internet before to write but I could not express what I feel on google search for example. So, I am writing here what I feel. Sorry for my English if I could not express what I meant.
    Thak you, and have a nice new year.....
    Levent

    I've been having the exact same issue, same monitor and same laptop.  I spoke to a couple Apple techs on the phone and took my mbp to a genius bar last night, thinking it might be a video card issue since the blocks were also showing up on my macbook's screen. It of course failed to replicate at the store, even with a TB display hooked up.
    After this I finally realized it was an issue with the monitor and not the laptop, since it only happened when they were connected (duh... I never checked with them disconnected)
    I was able to make it go away temporarily by pushing the cables on the back of the display firmly in, but a few hours later I noticed a couple blocks popping up again.. however it wasn't as bad as before.  Seems to me it must be some issue with the hardwired power/tb connetor.

  • HT201343 I have an apple TV 2 which mirrors my ipad and iphone beautifully. I want to do the same with my 'later 2011' macbook pro but there is no option I have checked firewalls and done all updates etc but no joy...PLEASE HELP!

    I have an apple TV 2 which mirrors my ipad and iphone beautifully. I want to do the same with my 'later 2011' macbook pro but there is no option I have checked firewalls and done all updates etc but no joy...PLEASE HELP!

    According to:
    http://www.apple.com/uk/osx/specs/
    Your MBP should be compatible, BUT it needs to be running Mountain Lion.
    AC

  • Can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.

    hi, i have a late 2008 15 inch macbook pro, which have a mini display port.
    I noticed that thunderbolt and mini display port looks a like. So, my question is :
    can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.
    thank you

    ken94538,
    no, you’d need a Thunderbolt-to-FireWire adapter or Thunderbolt-to-USB adapter to be able to access your Thunderbolt hard drive from your 2008 MacBook Pro.

  • What are the different ways to back up your photos from iphoto using a MacBook Pro which does not have a disk drive?

    What are the different ways to back up your photos from iphoto using a MacBook Pro which does not have a disk drive?

    Note - that no internet backup service has been proven to be safe and effective for backing up the iPhoto library - unless you personally have backup uyp an iPhoto library and restored it sucussfuly form one it should not be recommended - a large number of people have lost their photos trying it
    LN

  • I Have a Macbook Pro that does not have a disk drive.  How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased.  I registered the S/N and I can't find the Free download anywhere only trials.

    I Have a Macbook Pro that does not have a disk drive.  How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased.  I registered the S/N and I can't find the Free download anywhere only trials.

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • How do I install Lightroom 3 on my macbook pro that does not have a CD drive?

    I bought Lightroom 3 years ago but my computer at that time did not possess the processing power.
    I just bought a macbook pro but it does not come with a CD drive.... how can I install it without going out an buying an external drive?

    Download Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • My macbook pro I7 does not have 802.11n compability

    Hello you all.
    My macbok pro I7 was bought since 8 months ago and is this:
    Macbook Pro Information
      Nombre del modelo: MacBook Pro
      Identificador del modelo: MacBookPro9,2
      Nombre del procesador: Intel Core i7
      Velocidad del procesador: 2,9 GHz
      Cantidad de procesadores: 1
      Cantidad total de núcleos: 2
      Caché de nivel 2 (por núcleo): 256 KB
      Caché de nivel 3: 4 MB
      Memoria: 8 GB
    the problems is that my WIFI network adapter only support 802.11a/b/g. and doesn't support 802.11 /n or /ac
    Do you know if this problems could solve updating firmware or my hardware wifi adapter doesn't support 802.11n or /ac
    Thank you all
    Best regards
    MacBook Pro  WIFI Adapter Information
      Interfaces:
    en1:
      Tipo de tarjeta: AirPort Extreme  (0x14E4, 0xF5)
      Versión del firmware: Broadcom BCM43xx 1.0 (5.106.98.100.22)
      Dirección MAC: a8:bb:cf:03:d2:10
      Configuración regional: FCC
      Código del país: LA
      Modos PHY compatibles: 802.11 a/b/g
      Canales admitidos: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
      Wake on Wireless: Compatible
      AirDrop: Compatible
      Estado: No asociado
      No
      Estado: N

    Thank Linc
    ufff i feel walking to a dark room...
    What do you suggest to start looking for....
    1.fix my router if is possible in admin setup  or
    2. Find a new router with this feature
    Thanks
    Update: Dear Linc, Look this. I am at work now, and i try to connect to the guest WAP after i posted this message.
    Surprise, these change de LAOS country code to US and now 802.11/n, but still left to /ac This is the reason for i bought a 868L dlink router to use 5ghz.
    en1:
      Tipo de tarjeta:      AirPort Extreme  (0x14E4, 0xF5)
      Versión del firmware:           Broadcom BCM43xx 1.0 (5.106.98.100.22)
      Dirección MAC:    a8:bb:cf:03:d2:10
      Configuración regional:         FCC
      Código del país:    US
      Modos PHY compatibles:     802.11 a/b/g/n
      Canales admitidos:                1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
      Wake on Wireless:                Compatible
      AirDrop:               Compatible
      Estado:  Conectado
      Información de la red actual:
    I re-ask the question.
    What do you suggest to fix my ROUTER.
    1.fix my router if is possible in admin setup  or
    2. Find a new router with this feature
    here some hints of my configuration:
    1. My ISP provider, provides a optics fiber router brand ZYXEL model ZNID24-xx and my dlink router DIR 868L is behind connected to LAN port1.
    2. DIR 868L 2,4 ghz wireless network setup in mixed /g /n Channel 1. (I tried every channel in only /n )
    3. Update the last firmware for DIR868L
    Thank you!
    best regards

  • Late 2011 MacBook Pro running Mountain Lion - Have two external displays (one MiniDisplay, one VGA-USB), how do I rotate just the one screen?

    The primary, horizontal monitor is connected by the VGA-MiniDisplay adapter, and the secondary monitor (vertical) is connected with a VGA-USB adapter. They both connect fine, but I only have the option to rotate both at once. That is, the main 'System Preferences' window that shows up on the primary monitor has the option to rotate, but only there -- when I rotate that screen it rotates both.
    Also, I'm not going to be using the actual MacBook screen. Any ideas as to how I can get this to work? Thanks!

    The Apple TB displays I've seen come with two TB connectors. You can cascade them in daisy-chain fashion.
    However, you are limited to how much information the GPU can produce and store. I've been told by the local apple shop (not an official Apple Store) geeks that if you cascade two of the big displays onto one of the Macs (big models), both will fire up, but the Mac's internal display will be disabled. Apparently 1GB of VRAM isn't enough for so many framebuffers.

  • Putting a SSD in the optical drive bay of a late 2011 MacBook Pro.

    I want to put a large Solid State Drive in the optical drive bay of my late 2011 (Model ID 8,2, 2.4 GHZ quad i7, 8 Gigs RAM, SSD boot drive) using the carrier and drive from Other World Computing.  The "About This Mac" box shows that the optical drive is 6G so I'm thinking that it should be OK putting a 6G drive in that bay, but OWC says that MacBook Pros have only a 3G optical drive capability.  I know this was true on earlier models, but my bay says 6G.   The 6 G SSD's are faster and have a longer warranty.  I do pro audio work and want to record to the new drive with speed and reliability.  Is there any way to prove that my MBPro will handle 6G?  I was told by someone at OWC who looked up my my serial number that it would work, but another tech guy at OWC said they didn't recommend it.  I'm thinking that they just issue a blanket "no" answer to cover themselves against people ordering a 6G drive for a machine that wouldn't handle it.  Before I order a 6G drive is there a way I can know for sure if it will work?
    Many thanks,
    Robert

    If the computer is correctly identified as 15-inch Late 2011 MacBook Pro, and not an Early 2011 build series,
    according to MacTracker database (http://mactracker.ca download application) optical drive interface supports
    the same spec as the hard disk drive...
    Hard Drive Interface    6.0 Gbps Serial ATA (SATA)
    Optical Drive Interface    6.0 Gbps Serial ATA (SATA)
    So should there be an error in identification, that would make a difference. Some Early 2011 models may
    have the 3.0 Gbps or 6.0Gbps data rate in the optical drive. All Late 2011 models should be 6.0 Gbps.
    Good luck & happy computing!

  • Can a late 2011 Macbook Pro utilize 1.35v RAM? Can OS X 10.8 display the RAM voltage?

    Can a late 2011 Macbook Pro (Sandy Bridge, not Ivy Bridge) utilize 1.35 volts Ram or will the Pro run it at 1.5 volts? Is there anyway in OS X 10.8 to determine what voltage the RAM is running at?

    Thanks again wjosten.
    Do you know of any third-party software titles that can provide the RAM's voltage? I ask because others have made unsubstantiated claims of using 1.35V ram with a late 2011 MacBook Pro and because Crucial's website suggests the use of 1.35V with a late 2011 MacBook Pro. Unless it is a mistake, I do not know why Crucial would suggest this:
    http://www.crucial.com/store/listparts.aspx?model=MacBook%20Pro%202.5GHz%20Intel %20Quad-Core%20i7%20(15-inch%20DDR3)%20Late-2011

  • Download SD card on Late 2011 Macbook Pro with iPhoto 9.6

    I am on a 13 inch late 2011 Macbook Pro running Yosemite 10.10.1, using iPhoto 9.6.   When I download photos straight from the SD card to iPhoto some of my photos come out like this.  They are good on the SD card and if I reload them 1-3 times they turn out okay.  I use an external hard drive, but I switched back to loading them on my hard drive to see if that would resolve the issue, they still loaded like below.  I have tried different SD cards, different cables (on external HD).  Any ideas?

      They are good on the SD card and if I reload them 1-3 times they turn out okay.
    Are JPEGs also corrupted?
    If  only some RAW files that are corrupted, and if the results are random, it looks more likely a hardware problem than a problem with the RAW support. I recommend to make an extra backup of your mac, just in case. And then test your drives and the memory. It might also be the USB port.

  • No startup sound on my late 2011 Macbook Pro

    No startup sound on my late 2011 Macbook Pro?

    Do you have your volume on mute?
    If you have your volume muted before shutdown then you will not hear the start up chime.

  • What external drives work well with a late 2011 MacBook Pro?  I ask because I just found out the hard way that a Samsung EVO 840 does not.  Also should I avail myself of something that works with Thunderbolt or Firewire?

    What external drives work well with a late 2011 MacBook Pro (I7, Lion OS) apart from my Kingston flash and USB drive, and the SD drives that I use in my cameras and recording devices?  I ask because I just found out the hard way that a Samsung EVO 840 does not.  Also, should I avail myself of something that works with the Thunderbolt or Firewire connections?  I'm looking to back up music and video files created and/or processed in Logic Pro and the Adobe Production Premium software suite (Premier Pro, After Effects, Audition, etc).

    Hmm, not sure what problems you had installing this drive. The review here gives it good marks for Mac:
    http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE1T0BW/produc t-reviews/B00E3W16OU
    There does seem to be a lot of prep to make it work:
    "1. Preparation to install your new shiny SSD
    1.a You will need a migration tool (I used the Sabrent kit USB 3.0 to Sata that was suggested in these review) see link http://www.amazon.com/gp/product/B00DQJME7Y/ref=oh_details_o03_s01_i01?ie=UTF8&p sc=1
    1.b You will need to download a trim enabler (mid 2012 macbooks only support native trim with apple brand ssd's) I recommend going to cindori.org and downloading trim enabler version 3.xx. You can do this step before or after the OS migration
    1.c You cannot use the Samsung SSD migration software *don't worry Mac has its own imaging/migration utility*"
    Also in those reviews:
    " Only down side when using this product in a Mac Mini is you will be required to download and install Trim Enabler so that your drive performs optimally on your Mac device. This is an Apple issue, not Samsung, but it is an extra step you will have to take after you install the hard drive, and any time you perform an OS upgrade." He rant's on.
    Personally I only deal with OWC:
    http://eshop.macsales.com/shop/SSD/OWC/
    They are very knowledgable and if there's a problem they will gladly take back the item. (Never happened to me yet - 8 years and counting).
    Just upgraded my 13" MBP 2011 to 120 GB for $79. Adobe CS 6 opens in 3 seconds! Awesome!
    When I was in Chicago I had a pro photographer for a client. She wound up with 4 internal drives in her Pro, 4 external drives and an dual array locked in a steel vault in the basement. All from OWC. OK she was a bit paranoid. Great client though.
    As far as value for price:
    http://eshop.macsales.com/item/OWC/MES3FH7500G/
    500 GB for $130.
    However as far as reliability is concerned:
    http://www.rockpapershotgun.com/2014/01/30/are-ssds-reliable/
    http://www.extremetech.com/computing/173887-ssd-stress-testing-finds-intel-might -be-the-only-reliable-drive-manufacturer
    So sudden power loss is an issue with SSDs.
    Personally I'd go with a moderate sized SSD internally and a conventional external for backup. An array would be the most reliable.

  • In mountain lion does the late 2011 macbook pro back up while it is asleep

    In Mountain lion does the late 2011 macbook pro back up while it is asleep?

    No. No computer backs up while asleep.

Maybe you are looking for