13-inch rMBP thunderbolt ports on the same bus?

Hi,
I'm looking to run two Focusrite Saffire Pro 40' s in Dual Unit Mode, with both directly connected to my MBP via Thunderbolt firewire adapters.
Focusrite requires that in Dual Unit Mode, if not daisychained, the two firewire connections share the same bus.
Are the two Thunderbolt connections on the same bus?
Thanks very much!

I don't have a retina MBP at my disposal to check with, but you can pretty easily figure this out if you have the computer in front of you.
Within the System Information program you can select Thunderbolt from the menu on the left and it will detail whether there are one or two busses.
To get to System Information, you can use Spotlight (the looking glass in the top right corner of the screen) or you can use the Apple logo in the top left, then click About this Mac > More Info > System Report.

Similar Messages

Is the thunderbolt port on the new MBP 13' the same as a mini displayport?

sorry if this is a silly question..

I think that the Thunderbolt port offers the same function as the Display port.
This a working solution that I have, which uses the Thunderbolt port for both Thunderbolt and Display port use:
Macbook Air (mid 2011) - connect to Seagate GoFlex Desk Thunderbolt Hard Drive (Using Thunderbolt cable)
Seagate Goflex Thunderbolt passthrough (it has 2 thunderbolt ports) to a Dell 24 Inch monitor (using Apple Mini DisplayPort to Dual-Link DVI Adapter cable).
Both the Seagate GoFlex and the Dell 24 inch monitor work :-)

PCIe G5s- are their firewire ports all on the same bus?

Sorry, posted this on the G5 expansion forum but never got a response. I've been looking but haven't found an answer to this. I know it was a major issue to some people that the old G5s had all their firewire ports on the same bus. I was just hoping that Apple had fixed this so I wouldn't need to use up an extra PCIe slot with a firewire card.
So, does anyone have an answer? Thanks ahead of time for any info!

Patrick:
Nope. My understanding of the FW spec is that devices slow down anything after themselves in the chain to their speed or lower. Thus, since the FW800 port isn't after the FW400 ones, the FW400 ones don't slow it down.
<
And in this corner, Brian:
<div class="jive-quote">Yes, and connecting a DV VCR or camcorder will pull everything down to 100Mbps. This is the reason some systems have dropped frame problems on capture and output to tape.< </div>
While these sound like complementary posts, the confusion is already palpating through this thread. Someone please clarify this for the rest of us. Suggest you use a standard example that includes a hi-speed FW drive, a standard FW drive and a DV deck. Hook them up in the same order to the two ports and tell us what the effects are on the performance of the Firewire bus.
At the present time, there are no PCIe firewire cards. < </div>
I had no idea.
Isn't that just weird? This is the 21st century! Why is there a new data bus structure in our Macintosh without any accessory cards?
bogiesan

Is firewire 400 and 800 on the same bus?

I have heard of the problems putting a camera and external hard drive on the same bus for capturing video. Does the 400 and 800 ports share the same bus and will using both with one connected to an external 800 drive and the 400 port for the camera be a good solution for capturing video?
Much appreciated.

yes, on PowerBooks w/1394a and 1394b ports, and on the G5's with 1394a and 1394b ports, they all share a common bus
sometimes if you have a lot of activity on the bus, you might have some frame drop out with a camera connected (but this is not a constant)
it never hurts to add a PCI card or cardbus card for PowerBooks and create a second FireWire channel that is independent of the builtin ports

FW 400/800 share the same bus?

On the 17" powerbook 1.67GHz, do the FW 400 and the FW 800 ports share the same bus?

Hi. Confirming what I just read... If I get a seperate firewire card for my lap top then my mac will read it as a different port and therefore I can operate at 400 firewire from my firewire card and operate at 800 firewire on the internal port?? Just confirming that if I have two seperate (the external card and the internal ports) that the mac will read them differnetly and thus not slow speeds to the 400 speed universally??
Did that question make sense?! Thanks!

HT3924 Why TDM exclusive to the iMac? Shouldn't any Mac from 2009 with the correct port have the same option?

Why Target Display Mode exclusive to the iMac? Shouldn't any Mac from 2009 with the correct ports have the same option? Is there a physical limitation that prevents MacBook Pro/Air notebooks with thunderbolt ports from entering Target Display Mode? Or does someone just need to poke the OSX development team with a stick?

that was the route I took this time when I updated to 10.5.6 - the downloaded combo updater rather than the smaller (half the size) Mac updater...
Pretty sure this is a combination of MTU, 2Wire 2701 oddities and me not knowing how to solve them directly (as well as the ipv6 stuff that's still showing in the logs despite IPv6 being turned off).
Anyhow, I did get it connected under the Ambit finally (took restarting the mac, not expecting that in the "switch" from windows xp)- and that really rocked. Now I'm working on teaching my 2Wire to be a dumb modem, to go with the operator
Actually, I think I'll just cut my losses for the moment and go with cable, once I find a good wireless router to connect the media center and xp box up front.

OHS not able to redirect to two different ports of the same managed server

Hi
I need to redirect to different ports of the same managed server (say M1, M2) based on the availability of the managed server. ie when managed server M1 is busy handling other requests i need to redirect my new request to M2. i already have this mechanism to find out which managed server is free.
so now the problem is if M2 is free how would i tell ohs to redirect it to M2 server??
M1,M2 both managed servers are hosted at host1.example.com.
M1 port - 8001
M2 port - 8003
my context root is /YpsSupplyPlanningEngineService/supplyPlanningEngineService
my mod_wl_ohs.conf is defined as:
<Location /M1/YpsSupplyPlanningEngineService/supplyPlanningEngineService>
SetHandler weblogic-handler
PathTrim /M1
WebLogicHost host1.example.com
WebLogicPort 8001
</Location>
<Location /M2/YpsSupplyPlanningEngineService/supplyPlanningEngineService>
SetHandler weblogic-handler
PathTrim /M2
WebLogicHost host1.example.com
WebLogicPort 8003
</Location>
when i type the url in browser as "http://<ohs_server_url>:7777/M2/YpsSupplyPlanningEngineService/supplyPlanningEngineService"
This is not working. Is there any way to do it?
Please help me here.
Thanks in advance.
Edited by: 925137 on Jul 5, 2012 2:03 AM

Hi Anon
thanks for replying..
Chnage from /M1 to M1 didnt work.
then I set debug ALL and set WLLogFile to full path
the log i received when i queried for request is:
2012-07-05T17:04:18.5774+05:30 ================New Request: [GET /M1/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL HTTP/1.1] =================
2012-07-05T17:04:18.5774+05:30 Using Uri /M1/YpsSupplyPlanningEngineService/supplyPlanningEngineService
2012-07-05T17:04:18.5774+05:30 After trimming path: '/YpsSupplyPlanningEngineService/supplyPlanningEngineService'
*2012-07-05T17:04:18.5774+05:30 The final request string is '/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL'*
2012-07-05T17:04:18.5774+05:30 SEARCHING id=[host1.example.com:8001] from current ID=[host1.example.com.com:8001]
2012-07-05T17:04:18.5775+05:30 The two ids matched
2012-07-05T17:04:18.5775+05:30 @@@FOUND...id=[host1.example.com.com:8001], server_name=[host1.example.com.com], server_port=[7777]
2012-07-05T17:04:18.5775+05:30 attempt #0 out of a max of 5
2012-07-05T17:04:18.5775+05:30 keepAlive = 1, canRecycle = 1
2012-07-05T17:04:18.5775+05:30 Trying a pooled connection for 'xxx.xxx.xxx.xxx/8001/8001'
2012-07-05T17:04:18.5775+05:30 getPooledConn: found a host and port/securePort match
2012-07-05T17:04:18.5775+05:30 getPooledConn: No more connections in the pool for Host[xxx.xxx.xxx.xxx] Port[8001] SecurePort[8001]
2012-07-05T17:04:18.5775+05:30 general list: trying connect to 'xxx.xxx.xxx.xxx'/8001/8001 at line 2372 for '/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL'
2012-07-05T17:04:18.5776+05:30 URL::Connect: Connected successfully
2012-07-05T17:04:18.5776+05:30 SSL is not configured for this connection
2012-07-05T17:04:18.5776+05:30 Local Port of the socket is 7812
2012-07-05T17:04:18.5776+05:30 Remote Host xxx.xxx.xxx.xxx Remote Port 7812
2012-07-05T17:04:18.5776+05:30 general list: created a new connection to 'xxx.xxx.xxx.xxx'/8001 for '/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL', Local port:7812
2012-07-05T17:04:18.5776+05:30 Entering method BaseProxy::sendRequest
2012-07-05T17:04:18.5776+05:30 Entering method BaseProxy::parse_headers
2012-07-05T17:04:18.5776+05:30 No of headers =5
2012-07-05T17:04:18.5776+05:30 Header from client:[User-Agent]=[Java/1.6.0_11]
2012-07-05T17:04:18.5776+05:30 Header from client:[Host]=[host1.example.com:7777]
2012-07-05T17:04:18.5776+05:30 Header from client:[Accept]=[text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2]
2012-07-05T17:04:18.5776+05:30 Header from client:[Connection]=[keep-alive]
2012-07-05T17:04:18.5776+05:30 Header from client:[ECID-Context]=[1.004l1E7Cv6mESOGLMy^Aye0007Kd00000E;kXjE1ZDLIPHUjDHCj9KSnJLTkGSRtGKRXUQRdURP5URPdUPPJLQSqPRO_VBSpGSSgPSKgHQRiPQRbLIRbPQR_JLPmMTQZLO]
2012-07-05T17:04:18.5776+05:30 Exiting method BaseProxy::parse_headers
2012-07-05T17:04:18.5776+05:30 parse_client_headers is done
2012-07-05T17:04:18.5776+05:30 Method is GET
2012-07-05T17:04:18.5777+05:30 URL::sendHeaders(): meth='GET' file='/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL' protocol='HTTP/1.1'
2012-07-05T17:04:18.5777+05:30 Header to WLS: [User-Agent]=[Java/1.6.0_11]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [Host]=[host1.example.com:7777]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [Accept]=[text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [ECID-Context]=[1.004l1E7Cv6mESOGLMy^Aye0007Kd00000E;kXjE1ZDLIPHUjDHCj9KSnJLTkGSRtGKRXUQRdURP5URPdUPPJLQSqPRO_VBSpGSSgPSKgHQRiPQRbLIRbPQR_JLPmMTQZLO]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [Connection]=[Keep-Alive]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [WL-Proxy-SSL]=[false]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [X-Forwarded-For]=[xxx.xxx.xxx.xxx]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [WL-PATH-TRIM]=[M1]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [WL-Proxy-Client-IP]=[xxx.xxx.xxx.xxx]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [Proxy-Client-IP]=[xxx.xxx.xxx.xxx]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [X-WebLogic-KeepAliveSecs]=[30]
2012-07-05T17:04:18.5779+05:30 About to call parseHeaders
2012-07-05T17:04:18.5779+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6366+05:30 Reader::fill(): sysRecv returned 1271
2012-07-05T17:04:18.6366+05:30 URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 200 OK]
2012-07-05T17:04:18.6366+05:30 URL::parseHeaders: StatusLine set to [200 OK]
2012-07-05T17:04:18.6366+05:30 URL::parseHeaders: StatusLineWithoutStatusCode set to [OK]
2012-07-05T17:04:18.6366+05:30 Header from WLS:[Date]=[Thu, 05 Jul 2012 11:34:18 GMT]
2012-07-05T17:04:18.6367+05:30 Header from WLS:[Transfer-Encoding]=[chunked]
2012-07-05T17:04:18.6367+05:30 Header from WLS:[Content-Type]=[text/xml]
2012-07-05T17:04:18.6367+05:30 Header from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
2012-07-05T17:04:18.6367+05:30 parsed all headers OK
2012-07-05T17:04:18.6367+05:30 Exiting method BaseProxy::sendRequest
2012-07-05T17:04:18.6367+05:30 sendResponse() : r->status = '200'
2012-07-05T17:04:18.6367+05:30 Hdrs to client (add):[Date]=[Thu, 05 Jul 2012 11:34:18 GMT]
2012-07-05T17:04:18.6367+05:30 Hdrs to client (add):[X-Powered-By]=[Servlet/2.5 JSP/2.1]
2012-07-05T17:04:18.6367+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6373+05:30 Reader::fill(): sysRecv returned 4096
2012-07-05T17:04:18.6374+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6374+05:30 Reader::fill(): sysRecv returned 4096
2012-07-05T17:04:18.6374+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6374+05:30 Reader::fill(): sysRecv returned 4048
2012-07-05T17:04:18.6374+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6377+05:30 Reader::fill(): sysRecv returned 4096
2012-07-05T17:04:18.6377+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6377+05:30 Reader::fill(): sysRecv returned 4096
2012-07-05T17:04:18.6377+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6377+05:30 Reader::fill(): sysRecv returned 4048
2012-07-05T17:04:18.6377+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6381+05:30 Reader::fill(): sysRecv returned 4096
2012-07-05T17:04:18.6381+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6381+05:30 Reader::fill(): sysRecv returned 4096
2012-07-05T17:04:18.6382+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6382+05:30 Reader::fill(): sysRecv returned 4096
2012-07-05T17:04:18.6382+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6382+05:30 Reader::fill(): sysRecv returned 1340
2012-07-05T17:04:18.6382+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6382+05:30 Reader::fill(): sysRecv returned 385
2012-07-05T17:04:18.6382+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6382+05:30 Reader::fill(): sysRecv returned 331
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 305
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 255
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 225
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 179
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 307
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 393
2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 179
2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 311
2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 255
2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 223
2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 179
2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 309
2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 393
2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 179
2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 319
2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 255
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 327
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 377
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 179
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 305
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 309
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 379
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 179
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 311
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 315
2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 381
2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 179
2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 327
2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 317
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 237
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 319
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 311
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 251
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 319
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 233
2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 325
2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 261
2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 315
2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 239
2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 325
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 235
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 323
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 243
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 321
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 321
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 239
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 329
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 329
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 415
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 286
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 231
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 267
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 333
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 253
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 335
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 251
2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 343
2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 259
2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 325
2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 341
2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 353
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 255
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 331
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 265
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 327
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 263
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 335
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 261
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 337
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 255
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 345
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 279
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6397+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6397+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6397+05:30 Reader::fill(): sysRecv returned 386
2012-07-05T17:04:18.6397+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6397+05:30 Reader::fill(): sysRecv returned 77
2012-07-05T17:04:18.6397+05:30 calling closeConn() with non-null URL* at 633
2012-07-05T17:04:18.6398+05:30 canRecycle: conn=1 status=200 isKA=1 clen=-1 isCTE=1
2012-07-05T17:04:18.6398+05:30 closeConn: pooling for 'xxx.xxx.xxx.xxx/8001'
2012-07-05T17:04:18.6398+05:30 closeConn: pooling '0'
2012-07-05T17:04:18.6398+05:30 request [YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL] processed successfully..................
2012-07-05T17:04:18.7859+05:30 BEFORE acquire_lock
2012-07-05T17:04:18.7860+05:30 AFTER acquire_lock
2012-07-05T17:04:18.7860+05:30 List size is 1
2012-07-05T17:04:18.7860+05:30 Cleaning up the list node 'host1.example.com.com:8001'list Length '1'
2012-07-05T17:04:18.7860+05:30 stale connections: KA = 20, delta = 0
The final request string generated is correct.. but still this fails in my java code (where i send request).
it gives me an error saying:
Error: java.io.FileNotFoundException: http://host1.example.com.com:7777/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL=/META-INF/wsdl/ServiceException.wsdl
javax.xml.ws.WebServiceException: java.io.FileNotFoundException: http://host1.example.com.com:7777/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL=/META-INF/wsdl/ServiceException.wsdl
Edited by: 925137 on Jul 5, 2012 4:42 AM

Can I put a Moshi Mini DisplayPort to HDMI Adapter (with audio) in a thunderbolt port in the new macBook Pro

can I put a Moshi Mini DisplayPort to HDMI Adapter (with audio) in a thunderbolt port in the new macBook Pro, will it work?

Should work perfectly.

Is it possible to use both an ILB and an ELB (listening on the same port) in the same Azure cloud service?

I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
So, a typical Lync deployment looks like this:
       Internal users
               |
               443
                  |
          Internal LB
        192.168.0.20
        443         443
          |               |
   Lync FE 1     Lync FE 2
192.168.0.21 192.168.0.22
          |               |
      4443        4443
          External LB
       Public IP Address
                 |
              443
                 |
       External Users
This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
is the keyword here.
After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
For reference, my commands are:
Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
(This completes successfully)
Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
(This fails)
The existing external endpoint is configured as such:
Get-AzureVM LYNCFE1 | get-azureendpoint
LBSetName : HttpsExtLB
LocalPort : 4443
Name : HTTPS-Ext
Port : 443
Protocol : tcp
Vip :
ProbePath :
ProbePort : 4443
ProbeProtocol : tcp
ProbeIntervalInSeconds : 15
ProbeTimeoutInSeconds : 31
EnableDirectServerReturn : False
Acl : {}
InternalLoadBalancerName :
IdleTimeoutInMinutes :
LoadBalancerDistribution :
The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
shouldn't be any conflict here... however it looks like there is one instead.
Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

Re: if weblogic can serve two ports at the same time?

That's not true. WebLogic supports a non-secure and secure listener port at the
same time. That was one of the selling points for my organization.
Michael Girdley wrote:
If, you mean the same port on two different IP addresses, then the answer is
yes.
If, you mean two different ports on the same IP address, then the answer is
no.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
fxy <[email protected]> wrote in message
news:8fdk99$t9$[email protected]..
<URGENT QUESTION>
I'd like to know if weblogic can support two ports at the same time.
thank you in advance.
<URGENT QUESTION>

Well, the question was really meant to see if any change was made to WL to support
this, not because I didn't believe Michael Girdley.
P.S., this is something Websphere 4.0 let's you do...In case this encourages someone
to add this support.
"Mike Reiche" <[email protected]> wrote:
>
If you don't believe Michael Girdley, then I don't know why you would
believe anyone
else. I believe the answer is still 'no'.
Why do they 'have to be on different ports'? We block requests by URI
- so just
block all requests to /youradminapp/* at the firewall. Or you can block
them at
your Web Server. Or restrict them by user in WL.
Mike
you"Anil Arora" <[email protected]> wrote:
Is it still true that WL 6.0 cannot host multiple (non-secure) HTTPports
on one
server? We need this capability within one JVM to allow one web application
to
be accessed from one port while another through a second port. Forexample,
we
have a application to be exposed through the firewall at port 7001.
Then we have
another admin application to only be accessed within the firewall. But
they need
to be deployed within the same JVM since they may have shared statebetween
them.
Thanks,
Anil
"Michael Girdley" <[email protected]> wrote:
I'm sorry, to clarify my statement: I was speaking about nonsecure
communications. Weblogic can only support one listener port at a time.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Allen Akers <[email protected]> wrote in message
news:[email protected]...
That's not true. WebLogic supports a non-secure and secure listenerport
at the
same time. That was one of the selling points for my organization.
Michael Girdley wrote:
If, you mean the same port on two different IP addresses, then
the
answer is
yes.
If, you mean two different ports on the same IP address, then theanswer
is
no.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
fxy <[email protected]> wrote in message
news:[email protected]...
<URGENT QUESTION>
I'd like to know if weblogic can support two ports at the same
time.
thank you in advance.
<URGENT QUESTION>

Why can't the Thunderbolt port on the rear of the display support a Mini DisplayPort monitor?

I bear no ill will as I knew the situation going in and am happy with my beautiful Thunderbolt display, but I simply cannot understand this lack of a blatantly obvious feature.
Why I must unplug my Thunderbolt display from my MacBook Pro (and lose my USB keyboard, external HDD, and wired ethernet) because my Thunderbolt display - with what appears to be an identical Thunderbolt port on the rear, fully capable of powering a second Thunderbolt display - cannot power my 1080p HDTV through a Mini DisplayPort to HDMI adaptor.
I have hoped and hoped for a firmware or software update that would allow this, as it is seemingly an oversight or an anticompetitive measure, but nothing.
Any ideas, workarounds? So dumb.
EDIT: Also, this is not a realistic solution although likely would work: https://discussions.apple.com/message/17662077#17662077 - also strengthens my suspicion of this being an anticompetitive measure more than a technological lacking.

Answer?: http://www.macrumors.com/2011/09/28/apple-thunderbolt-display-teardown-reveals-p lethora-of-hardware-inside/
Still kinda uncool, and seems like a solvable technical limitation.

Write to serial port and digital port at the same time

hello,
I need to write to the digital port and the serial port at the same time. Right now I have the two vi's (to write to the serial port, write to the digital port) in the sequence structure. First I write the digital port, then write the serial port. Using the oscilloscope, the interval between these two executions is 10 ms; and I need to reduce this interval to as small as possible. I would appreciate help in any way. Thank you.

Hello;
This is a little tricky. Since the transition from one sequence to another is completely Software timed, and windows manages all tasks that are running at one given time, there isn't a method to reduce that transition time.
The most you can do is try to optimize your code so all the time expent on the transition is due only to the task management.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

I want to transfer data through the serial port in the same coding that hyperterminal uses. How can i do it?

The serial port seems to be working, and labview seems to be sending the data, but the problem is in which format does it send the data, because in hyperterminal i just input the string "JDX" and it sends it to my device, with labview it sends something but my device does not recognize it.

nobuto wrote:
> I want to transfer data through the serial port in the same coding
> that hyperterminal uses. How can i do it?
>
> The serial port seems to be working, and labview seems to be sending
> the data, but the problem is in which format does it send the data,
> because in hyperterminal i just input the string "JDX" and it sends it
> to my device, with labview it sends something but my device does not
> recognize it.
Hyperterminal adds the carriage return/line feed to the string which is
generated by the return key to send out the current line. LabVIEW simply
sends out what you tell it, so try to set the string to "Show \ Display"
format and add a \r or \n or \r\n to the command you want to send out.
Assumes of course that you set the right baudr
ate/bits/parity etc in
LabVIEW with the VISA property node, when opening the serial port.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem.

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?

What is the resolution of the picture that you are trying to print?
Go to Image>resize>image size, read the resolution in px/in, then report back, please.
Also, are you in a position to try printing with another printer in an attempt to narrow this down?

To drive a monitor from a Mini, is there an advantage to using the Thunderbolt port versus the HDMI port?

Is there an advantage to using the Thunderbolt port versus the HDMI port to drive a monitor?
Can i just plug in my 18" LCD TV to the HDMI port and use it as a monitor?
Thanks, friends ~

Thanks, lllaass,
I have a new Mini arriving tomorrow. It will be replacing my 9 year old iMac.
I have at my disposal an older VGA monitor and a regular LCD TV with
an HDMI input. I'm trying to decide which one will work the best for me. If I use the TV, I won't have to buy
a Thunderbolt to VGA adapter.

13-inch rMBP thunderbolt ports on the same bus?

Similar Messages

Maybe you are looking for